Ubuntu Servers :: 9.10 Server - How To Setup Remote Desktop / VNC Via SSH + Command Line
Feb 21, 2010
I am playing around with the idea of being able to use a cloud or instance based service to install Ubuntu 9.10 Server. This will enable me to have remote access via SSH command line.So far, I've installed Ubuntu 9.10 Server + Ubuntu Desktop to a virtual machine. I can access this via SSH and locally via the desktop. However, in the real environment the only access I am going to have initially is via SSH.
I would like to be able to connect using Windows Remote Desktop or VNC (whichever is easier and most importantly - most secure) to the machine.. even though the desktop is on there, I need to somehow configure the remote access all from the command line.I've had a read of various forums and have been trawling support forums for days but can't find a working solution for 9.10 Server or that fits my situation above where I will not have any physical access to the desktop or machine to configure remote desktop. It all has to be done via SSH/command line.
View 4 Replies
ADVERTISEMENT
Oct 4, 2010
I have to access my laptop and transfer files but the screen is broken. The only protocol that I know for certain that's on that machine is rdp. Since the screen is broken I can't test anything else.
View 9 Replies
View Related
Jun 26, 2010
how to enable remote desktop by command line in 10.4 lucid? The command sudo gconftool-2 -s -t bool/desktop /gnome/remote_access/enabled true doesn't work, because when I open /system/pref/remote desktop, it is still not activated.
View 5 Replies
View Related
Sep 23, 2010
I'm playing around with trying to access a Fedora 13 system from a Ubuntu 10.04 system. Both are relatively new vanilla installations.I went into System - Preferences - Remote Desktop on the Fedora system and enabled Remote Desktop. When I connect with the Ubuntu system (ssh), I can login, but all I see is an ssh terminal session. I was expecting the desktop environment (GNOME right?) to come up.
View 4 Replies
View Related
Feb 26, 2010
I'm looking for a good bittorrent client that can be run via a remote ui or doesn't require x-server and a gui to function.
View 2 Replies
View Related
Jul 14, 2010
setup a number of shared drives for accessing music, movies, photos and general files (documents, pdf files etc). now while a gui would be great, how to use the command line to setup these shared drives and also how to make the available in both windows and linux.
View 6 Replies
View Related
Jan 6, 2010
I am trying to set up a remote server on an old desktop that i have and i am running into problems. I have the packet installed but i can not get it to run. When ever I enter /sbin/service sshd start
I get Generating SSH1 RSA host key:[FAILED] and i can not for the life of me figure it out. Running fedora 12
View 2 Replies
View Related
Feb 24, 2009
I'm from a Solaris (printer.conf) background and having trouble setting up a printer on the network. My CentOS box does not have a GUI interface available. I have been playing with lpadmin trying to add a printer - which it did, but everything is disabled, and the "enable" command is not found on my machine.
How do I make a simple printer on my network talk to my centOS box?
Here's the printer.conf from a Solaris machine that works:
raphael:
:bsdaddr=igppps1,raphael,Solaris:
And the printers.conf from the CentOS box:
lumina# more printers.conf
# Printer configuration file for CUPS v1.2.4
[Code].....
View 10 Replies
View Related
Aug 5, 2011
Is there any way to install a Ubuntu server and access the server remotely via a Ubuntu desktop environment instead of a SSH command line?
I will be installing a Ubuntu server in an office where the office manager will need to be able to do simple things like add/remove users, access filesystems, etc. She can handle these tasks in Ubuntu desktop/GUI, but it is impractical for her to have to learn how to use the CLI terminal to do this stuff.
Will I have to install desktop Ubuntu on the server to do this, or can I install Ubuntu server version and setup another computer Ubuntu desktop to remotely login graphically?
View 1 Replies
View Related
Jan 22, 2011
I just got done installing Ubuntu Server 10.04 on a home server. Now what should I do? I was hoping to have 3 computers connected to it so that we can all share files wirelessly if that's possible.Does Ubuntu Server have a GUI or command line only?
View 9 Replies
View Related
May 5, 2011
I have a problem with my Terminal Server Client, I cannot seem to connect to any windows server via IP address. Can anyone please recommend any tool I could use to connect? I need to work on the server for admin interfaces example Admin Kits for workspace protection
View 9 Replies
View Related
Sep 12, 2010
On Ubuntu Desktop editions, there is a GUI application which allows easily changing to a different server. It can even find out how one is the fastest update server.Is there a corresponding command line tool available to do this? Because I'm using the Server edition without GUI. I hate to manually edit /etc/apt/source.list.
View 4 Replies
View Related
Mar 14, 2010
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies
View Related
Oct 4, 2010
I have been trying to set up an LDAP server for a development environment as part of an internship for a week now, and I cannot get past this point. I have been following the 10.04 server guide to set up LDAP here: URL...Once I get to the following point in the guide, it just hangs:"As an example of modifying the cn=config tree, add another attribute to the index list using ldapmodify:"I've been working on this for a week and can't understand why this won't work. I am fairly certain that I've followed the guide to a 'T.'Any idea why am I receiving a permission denied error? Is this a permissions issue with one of the config files?
View 9 Replies
View Related
Oct 20, 2010
install ubuntu 10.04 desktop, configure remote desktop so I can connect from my Mac or Windows machine without being physically be at the ubuntu machine, and I won't have a dedicated monitor for the ubuntu box either. And I want to have root access to everything via remote desktop or VNC.What I have tried: system->preferences->remote desktop to enable remote desktop, I can connect and see the desktop, the mouse clicks would only show on the directly connected monitor, not in my VNC session.Then I tried to install TightVNC server, start a at display :1, I can also connect, but every time any action requires a root access, such as installing a package using Ubuntu Software Center, the root password prompt would only show up on the directly connected monitor.
I also install xrdp package, and followed instructions here: [URL]It actually worked using Remote Desktop application from my Mac or Windows box for a little while until I restarted the machine, thinking I can unplug the monitor and connect via remote desktop from then on. Then it stopped working.
View 7 Replies
View Related
Nov 27, 2010
I am Trying to set up my desktop in order to access it from a remote computer using Remote desktop. I have ubuntu 10.10 and am using the included software remote desktop. When I run the programm is says i can only connect locally using the name "local host". I am trying to connect to my desktop from a vnc app on my ipod touch. It asks me for the ip address and the port.
View 1 Replies
View Related
Feb 16, 2010
I am attempting to set up a VNC with ssh tunneling for remote desktop between my laptop (opensuse 11.2) and my desktop (kubuntu karmic) and using the instructions here: [URL] and here: [URL] but I am having trouble getting remote desktop to work once I establish the ssh tunnel
I start out with
Code:
ssh <user@remotepc> -p <non22port> -L 5900:localhost:5900
That seems to wok and connect properly
The problem comes when I try to use a remote desktop client on the laptop to initiate the VPN desktop sharing and point it to
Code:
localhost:5900
Thats when I get a notification on the host saying:
Code:
Refused uninvited connection attempt from 127.0.0.1
And on the laptop I get:
Code:
VNC server closed connection
I have tried messing with the few settings in Krfb, but none seem to have any impact. How do I open localhost:5900 and allow VPN tunneling to the host machine?
View 2 Replies
View Related
Apr 13, 2010
I would like to set up a remote desktop connection between two computers over the Internet. I already tested remote desktop within a local network but it's far from secure enough this time. I will try to follow this guide [URL] (ssh portforward and internet). This still leaves ufw and how it should be configured. Let's say I have this setup, server computer has ip 12.341.245.124 and the client has 78.12.543.234 how should ufw be configured to be secure? This remote desktop wont be connected to a local network
View 1 Replies
View Related
Oct 8, 2010
Bash acts weird in 10.04 server. Whenever I try to run .sh scripts, every empty line in the script results in "command not found". Then on even simple scripts I get syntax errors, but the same exact scripts work on my 9.10 desktop installation. There's also another problem, I'm not really sure if it's bash-related. After setting the proxy using
[Code]...
View 5 Replies
View Related
Mar 16, 2010
I am a Linux newbie. I am trying to see if it is possible to access a windows pc through some form of vpn/rdp setup. My machine is dual boot with Windows XP. On Windows XP, I am able to connect to my office via VPN client to connect to my office, then Remote Desktop to my local machine on the network.. Is there some way for me to do this with Linux? I find it really annoying to have to boot to Windows just to access my work pc.
View 9 Replies
View Related
May 19, 2010
I am very new to Ubuntu (any Linux) evironment. And it has been a long long time since I have dealt with seting up servers. I have done alot of searching but haven't found exactly what I THINK I am looking for.
I want to create a file server (I have created my Ubuntu server cd) and add it to my home network (all windows pcs). I need to be able to access it when away from home ( I work away from home mostly). I will be accessing this with a Windows 7 laptop.
What do I need installed on the server? Samba for the file server part. What else for the remote access? I also would rather not access the data via FTP. I would like it to come up as a drive in my Windows Explorer. If not, I remember back in college (20 years ago) when I could open a little window (XWindow maybe) on the other server.
An issue I see that might not be an issue. I have a static IP from my ISP. It comes into my home via their modem. I attach to the modem with a router. All my laptops connect to it wireless and this server will be wired. How do I hit the server and not one of the laptops with only having the one IP address? Each of these plus my external harddrive and printer have their own internal IP address' that I have assigned.
View 3 Replies
View Related
May 28, 2010
I am wondering how to setup a remote disk on my server so that I can remotely access files on my Windows laptop through the "Map Network Drive" feature.
How do I go about doing something like this?
View 2 Replies
View Related
Feb 14, 2011
How to download debian stable setup iso from the command line?
View 4 Replies
View Related
Mar 6, 2011
I'm running Ubuntu 10.04 LTS, Lucid Lynx and I'm having problems implementing changes to interfaces.I have made changes to my interfaces via the GUI but when I open a terminal window and so a ifconfig I find that nothing has changed. I've opened an editor and looked at etc/network/interfaces but changes made with the GUI never make it to the config file.Does the networking GUI result in changes to the etc/network/interfaces file.
View 1 Replies
View Related
Sep 18, 2010
I am pretty new to C.L.I/text editing work. So maybe its a bit old-fashioned but I am interested in learning how to send email via the command line. I am running 10.04 32 bit
Situation: I have followed the explicit and step-by-step actions at http://klenwell.com/is/UbuntuCommandLineGmail
Question: Upon completion, when trying to send a test email to myself via gmail (from CLI) I get the following error: "msmtp: no recipients found". In CLI below it asks me to explicitly pick a mailx to download. I think I already have mailx as when I type mailx I get "no mail for primary".
Here is my work
Code:
:~$ sudo apt-get install msmtp mailx
[sudo] password for:
Reading package lists... Done
Building dependency tree
Reading state information... Done
msmtp is already the newest version.
Package mailx is a virtual package provided by:
mailutils 1:2.1+dfsg1-4ubuntu1
heirloom-mailx 12.4-1.1
bsd-mailx 8.1.2-0.20090911cvs-2ubuntu1
You should explicitly select one to install.
E: Package mailx has no installation candidate
:~$ gedit ~/.msmtprc
:~$ chmod 600 ~/.msmtprc
:~$ gedit ~/.mailrc
:~$ echo -e "testing email from the command line" > /tmp/test_email
:~$ mailx -s "mailx gmail test" xxxxxxx@gmail.com < /tmp/test_email
msmtp: no recipients found
Here is ~/.msmtprc
Code:
# config options: [URL]#A-user-configuration-file
defaults
logfile /tmp/msmtp.log
# gmail account
#account gmail
auth on
host smtp.gmail.com
port 587
user xxxxxx@gmail.com
password xxxxxx
from xxxxxx@gmail.com
tls on
tls_trust_file /usr/share/ca-certificates/mozilla/Equifax_Secure_CA.crt
# set default account to use (not necessary with single account)
#account default : gmail
and here is ~/.mailrc
Code:
# set smtp for mailx
# gmail account (default)
# $ mailx -s "subject line" -a /path/attachment recipient@email.com < /path/body.txt
set from="xxxxxx@gmail.com (xxxxx)"
set sendmail="/usr/bin/msmtp"
set message-sendmail-extra-arguments="-a gmail"
View 4 Replies
View Related
Aug 9, 2010
I have installed CentOS 5.5 with no GUI - how do I enable/setup the "mail" client command to be able to send email via my Exchange 2007 mail server on my LAN?
View 1 Replies
View Related
Dec 11, 2010
I'm trying to set this thing up. I'm running on a residential DSL line so obviously port 25 is blocked. I need a FREE solution to get around this.
View 5 Replies
View Related
May 2, 2015
I wanted to install Debian 8.0 on my second hdd in my UEFI machine, but when I choose UEFI boot from USB, GRUB command line appears, and I cannot boot up the setup. I used Rufus to create the bootable USB stick, using the amd64 kde CD image. I tried several images and I deleted the Linux and Efi partitions from previous installation of Ubuntu . Also I deleted GRUB from the Windows 7 Efi partition.
In the UEFI setup fast boot and secure boot are disabled, and I don't seem to have the option to boot in legacy mode, if I choose the simple USB boot option (without "UEFI" in front) I get "please insert correct boot media, and press any key or reboot". I couldn't manually boot from GRUB command line, because it is showing that all the drives are empty, and if I type "boot" I get "please load the kernel first".
View 2 Replies
View Related
Jul 8, 2009
The problem relates only to the configuration of services in text mode ("setup", part of the setuptool package). The setuptool package is "setuptool-1.19.4-2.fc9.x86_64". There is no "Services configuration" menu when I start "setup". The tools listed in the setup window are:
- Authentication configuration
- Firewall configuration
- Keyboard configuration
[code].....
IMHO, the reason I don't have a services configuration tool is the missing services configuration files "98services" and/or 99"services" (or something like that) from the setuptool's configuration directory. (Please correct me if I am wrong.) Can someone please let me know what information should be in those two files, and what are the correct file names? Without them I cannot change the services on this computer. (FYI, the GUI (system-config-services) works, however, I need to run this computer in text mode.)
View 2 Replies
View Related
Mar 27, 2010
is it possible to have a command line prompt available on the desktop, operating sort of like conky?
View 5 Replies
View Related
