Ubuntu Servers :: 9.10 Server Cpufreq Missing Drivers
Apr 29, 2010
I'm running 9.10 server on a mini-itx board. The CPU is Core 2 Duo T5450 and supports Enhanced Speedstep and the BIOS is set to auto, enabling C1E.I've been trying to get cpufreq to work but none of the drivers are present.When I try to load suitable ones they are always not found.Does someone know if cpufreq is not supported on the server kernal? Or what command will apt-get the modules that aren't here now?I've been reading the cpufreq tutorials but can't get past loading a suitable driver - which means I'm nowhere now. My notebook runs the same CPU and cpufreq is working fine with desktop Ubuntu install of 9.10.
View 5 Replies
ADVERTISEMENT
Jul 31, 2011
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
[code]....
View 2 Replies
View Related
Dec 1, 2014
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies
View Related
Feb 24, 2010
I had installed fedora 12 few months ago on a PowerEdge 1900 server but I did not install any video. Some times the screen looks shabby (attached is how it looks like) and scrolling is also not smooth. where can I get video drivers for my server.
View 1 Replies
View Related
Jun 19, 2011
Is there a way to get Xen PV-on-HVM drivers for Linux HVM guests working on ubuntu server, according to:[URL]..
Quote:
Xen PV-on-HVM drivers were merged to upstream kernel.org Linux 2.6.36, and various optimizations added in Linux 2.6.37. I am using Ubuntu server on my Xen HVM VPS. It would be nice to use the PV drivers for HVM to take advantage of performance improvements (so it doesnt need to use the Qemu emulation layer and can use Xenbus/netfront etc) I am running a custom kernel 2.6.39.1 and have enabled Xen support in the kernel (under "Processor type and features" -> "Paravirtualized guest support" -> "Xen guest support"
[Code]...
View 1 Replies
View Related
Dec 29, 2010
Tried to test the 10.10 Netbook's Unity but after keying the password I got a "Unity missing driver" without any identification of the driver. Is it available in the repositories? How can I identify it to install it? Why isn't it included?
View 5 Replies
View Related
Jan 31, 2011
I am having some problems with my CPU speed detailed here: [URL]
Basically it is restricting my computer to 800Mhz after 10-15mins for no reason. With Windows I was able to use something called Notebook Hardware control to ramp up the speed to the max of 1.73GHz. With the cpufreq applet, it won;t do anything.
Is there another program I can use to override the speed?
View 9 Replies
View Related
Mar 14, 2011
I have been using kubuntu, and I would like to change the cpufreq settings. My understanding is that there is no applet for that, and I would have to do it by hands with a script.
View 4 Replies
View Related
Mar 21, 2010
I seem to be missing drivers for my Gateway laptop MA7. I have looked in System->Admin->Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound->Hardware. I'm guessing at this point that I don't have the driver installed.
However, I get the following output code...
View 1 Replies
View Related
Apr 5, 2010
I installed FEDORA 8 on my laptop for a class project. everything went find except. with I attempt to connect to any network. I keep getting the no network device error. so I tried to install the Ethernet and wi-fi driver directly without success.
View 1 Replies
View Related
May 1, 2010
Has anyone managed to get wireless Ralink rt3070 drivers working in Lucid? Before in Karmic, you could "sudo modprobe rt3070sta" as they were "stagging" drivers already in the kernel, but apparently they're missing from the kernel in Lucid as reported here [URL]... I get errors when compiling the latest drivers from Ralink (DPO_RT3070_LinuxSTA_V2.3.0.2_20100412) and they don't seem to work.
View 3 Replies
View Related
May 23, 2010
I'm trying to install the current drivers (from the Hardware Drivers tool) but it fails, refering me to jockey.log, which contains this:
Code:
2010-05-23 16:19:46,978 DEBUG: nvidia_current is not the alternative in use
2010-05-23 16:19:47,106 DEBUG: nvidia_current is not the alternative in use
[code]....
View 2 Replies
View Related
Nov 20, 2010
1) I have micromax 372g usb modem(3g).. but it is not being connected ubuntu 10.10
2) I suppose my device is being recognized and I tried this method [URL] but when I tried to install, it said that package missing for wvdial.
What should I do. Where can I get this package and how can I install it (with no dependany check). My life is extremely difficult without internet on ubuntu, I am ready to give any other information that u need. I have ubuntu 10.10 maverick dual boot with windows. And yes take into consideration that I don't have internet on ubuntu. So provide me full detail how to install it from other media and commands to execute them.
View 9 Replies
View Related
Aug 6, 2011
I had 10.04 and my wireless worked out of the box.
I just installed the latest and my wireless says "firmware missing"
The card is : 00:09.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
View 1 Replies
View Related
Jul 17, 2011
i noticed that my cpu is running on full scale all the time and tried to install inducator-cpufreq to get it under control.The problem is that thr indicator doesn't show up.I installed is from ppa:
Code:
sudo add-apt-repository ppa:anton-sudak/indicators
sudo apt-get update && sudo apt-get install indicator-cpufreq
and tried to run it by simply executing indicator-cpufreq.If i try to run it from terminal it gives me the following errors:
Code:
nigggo@nigggo-desktop:/$ sudo indicator-cpufreq
Traceback (most recent call last):
File "/usr/bin/indicator-cpufreq", line 81, in <module>
ind = MyIndicator()
[code]....
What am i doing wrong? I am running natty x64 with latest kernel and stuff...
View 3 Replies
View Related
Aug 11, 2011
when ever i type int his command i do it twice because i have two cores to it looks like this: cpufreq-selector -c 0 -g powersave cpufreq-selector -c 1 -g powersave
when ever i type this it says that "you must be root" what does thsi mean
View 3 Replies
View Related
Apr 26, 2010
I did open a bug for this as well:After upgrade to to Ubuntu 8.04.2, kernel 2.6.24-27-lpia all proprietary drivers are gone.Therefore, I cannot use wireless, webcam, sound, usb, etc... making work next to impossible. Does anyone know how to correct this easily and quickly so I am effective at work?
View 1 Replies
View Related
Sep 7, 2010
My AMD processor is a 5200 + and has its minimum frequency at 1GHz.
The ferquencias are used by cpufreq: 2700 Mhz, 2600 Mhz, 2400 Mhz, 2200 Mhz, 2000 Mhz, 1800 Mhz and 1000 Mhz .
My question is:
How could I tell for cpufreq use 1800Mhz as my minimum frequency?
Below, piece of my / etc / rc.d / rc.modules on the "CPU scaling governor"
[Code].....
View 14 Replies
View Related
Feb 27, 2010
In reply to my last question about Wireless incompatibility in Debian 5.0.3 'Lenny', I found out it was because of missing drivers that I chose to ignore, despite the notifications.Now I've got this problem again, this time with different hardware and a different distribution of Debian (Debian Testing 'Squeeze' i386). As well as asking me to load up ipw2100-1.3.fw (of which I already have), it asks me to load tigon/tg3_tso5.bin. Loading the firmware is no problem. Finding and downloading nthe firmware is the problem here.I've searched through packacges and bug reports for a dowload link, but I've only come across a bundle with the driver I need, as well as a few unneeded extras. IT doesn't work at all.
View 1 Replies
View Related
Jul 30, 2011
I have a Xserve server with Debian 2.6.26-2-amd64, the cpu is 2 X Intel Xeon 5150 @ 2.66GHz.I want to scaling down the cpu frequency and I only found three modules in my system and all of them are not working:
lake:/# ls /lib/modules/2.6.26-2-amd64/kernel/arch/x86/kernel/cpu/cpufreq
acpi-cpufreq.ko powernow-k8.ko speedstep-centrino.ko
lake:/# modprobe acpi-cpufreq
[code]....
View 3 Replies
View Related
Jul 30, 2011
I have a Xserve server with Debian 2.6.26-2-amd64, the cpu is 2 X Intel Xeon 5150 @ 2.66GHz.I want to scaling down the cpu frequency and I only found three modules in my system and all of them are not working.I found only module P4-clockmod can work with Xeon processors, but I don't know how to install it into the system.
View 2 Replies
View Related
Aug 5, 2014
So, I am having certain issues regarding Debian installation. Since my Wi-Fi card, Intel PRO/Wireless 3945ABG, requires non-free drivers not provided within Debian install image, I am bound to use USB stick during installation process to get those drivers, iwlwifi-3965-1.ucode and iwlwifi-3965-2.ucode, to enable Wi-FI on my system. However, no matter what I do, I cannot get debian-installer to detect drivers present on the machine. I have tried virtually everything - downloading drivers from multiple sources, renaming drivers properly, using ext4 instal of fat32, using gpt instead of msdos, placing files in /firmware instead of root directory - but no matter what I do, the outcome is the same. USB stick seems to be working properly. Am I bound to downloading non-free image now, or is there a solution?
View 9 Replies
View Related
Nov 29, 2010
I installed openSuSE 11.2 sometime ago in a COMPAQ Presario CQ60-419WM laptop (the ones that Wal-mart sold for $300 about a year-and-a-half ago. I installed the 64-bit version because I saw that the processor could support that (perhaps that was not a good idea). I have some problems that seem related to not having the necessary drivers. My wireless has never worked and my display is far from what I would like it to be (the response is slow, if a drag a window, its motion is jerky, if I scroll down in a browser window, the motion is wavy). The look and feel is very different from what I get at work and I do not know how to fix it.
[code]...
View 3 Replies
View Related
Apr 10, 2011
I am not sure where to post that so I'll just try here.My main question is: How can I prevent the system from changing my cpufreq settings? I'd like to keep the CPU load as low as possible so these settings are probably the best.However when I run some applications that require a higher CPU load the system changes the governor to performance and the rang to 0.8 - 2.4 GHz.And that's my problem. I neither know what application exactly is responsible for changing my cpufreq settings nor do I know how to turn that off.Or is it supposed to be that way?
View 11 Replies
View Related
Dec 25, 2010
Sometime back I installed cpufreq. Now while I know quite little about cpufreq, what little I understand tells me it can do two things :-
a. Give the user the capability to change frequencies - there is something called max frequencies and minimum frequencies and the user can play between them.
b. Show the cpufrequencies via the GNOME cpufreq plugin/applet.
Now while its able to show me the frequencies, I'm not able to find a GNOME or GTK front-end which I can use to set the frequencies. I did read a little bit about something called 'governers' which from what I learnt are something similar to profiles - as in you want to be conservative, powersave, ondemand and performance.
1. I'm looking for a Gnome-GTK CPU setting frequency GUI.
2. If somebody wants to share more info. about the whole cpu frequency thing that is also very welcome as I'm not really aware as to how can I do things a bit more intelligently so I'm able to get a bit more performance while not using much energy (can be done or cannot be done ?) but that discussion hopefully comes later after I've a tool through which I can do the same in GUI.
[code].....
View 5 Replies
View Related
Apr 17, 2011
(Opensuse 11.4, nvidia, core2) PROBLEM: cpu goes into C3 powersaving state even on full load (even when disabled from bios) (acpi=off prevents this). opensuse 11.4 kernel ignores boot option processor.max_cstate=2 (option has no effect). cpufreq util should be able to change governor policy to performance, however acpi-cpufreq driver doesn't load: modprobe acpi-cpufreq -> FATAL: error inserting acpi_cpufreq (/lib.../acpi-cpufreq.ko): No such device
View 7 Replies
View Related
May 19, 2010
I have upgraded a previous partial installation of karmic up to lucid. When I go to System->Administration there is no "Hardware Drivers" link. What should I apt-get install to get the Hardware Drivers link.
View 6 Replies
View Related
Mar 9, 2010
I'm configuring an Ubuntu server that's running x64 9.1. I installed the LAMP stack during the os installation and now I need to build an apache2 module. It appears as though apxs is missing. I've installed apache2-threaded-dev but am still missing apxs2.
View 4 Replies
View Related
Jul 24, 2010
My computer crashes occasionally and all of the files that have been written in the last few hours seem to disappear. On XFS sometimes they turn up in lost+found after xfs_repair. The files in ext4 seem to be gone for good.Is there any way to force linux to flush the meta-data more often or something so my files stop disappearing?
View 2 Replies
View Related
Sep 17, 2010
When 1 of the terminals logs in most of the time they do not get the top or bottom "panels". I have had to add 2 side panels to get the buttons and menus.This only happens to 1 user when she logs in. IS there any settings that i could change ? When the user is logged in she can do what ever she likes when she gets the panels back. and the speed is lovely.
View 3 Replies
View Related
