Now and then I'll run a script or command on a remote system via SSH. Sometimes the script or command will run for quite some time, spewing output all the while. The command will continue to spit out lines and I'll walk away from the computer. When I come back, the SSH session will have timed out due to lack of user input, but if I log in again I can see in the process list that the script is still running.
Is there a way to hop back onto my old SSH session so I can continue to view the output of the script? Or do I actually have to type a random letter every N-minus-one minutes, N being the default SSH timeout value, in order to prevent the original SSH session from timeing out in the first place?
It takes me a while to log in the splash screen just sits there for ages before i get to the desktop. Never used to be this slow and I'm not sure why. Firstly, I'm running Ubuntu 11.04, standard DE. I do have conky starting up in a script but it has the & at the end of the line so I didn't think this would cause it (or is there some special case for log in time on how & is treated?). However as a test I will comment out the line in the script and see if it is the cause.
However just for general knowledge and in case that isn't the problem, how does one go seeing what is happening during the time from when one log's in and the desktop is displayed? Is there some kind of log that shows the date/time that can be enabled or is there a debug mode that can be enabled somehow via special keys or maybe from grub?
I have several file servers in our offices and I am relatively new to Ubuntu / Linux. I get notices that there are updates for the server software from time to time. Is it typical to update everything when available or should I follow "If it ain't broke, don't fix it..." mentality?I would hate for everything to be working fine and then have an update throw me a curve.
I am running my Ubuntu 32 bit server on top of Windows 7 64 bit with VirualBox. It's a 2 core Atom. It's been working good for about half a year. But the last about 6 weeks the system time only in Ubuntu is going slow. About -8 per 24 hours! I can only guess because I have more things running in my Windows 7 and Ubuntu.
I can set it right by coping the hareware time to system time with this command:
Code: hwclock --hctosys
I want to run a crontab to have that command run every minute. But it don't seem to run.
For like windows you can resore your os to a state of peace kind of. If you messed up your vital files you could go back in time and restore you computer to a selected time. I was wondering if you could do that for ubuntu
Ever since I installed Ubuntu Natty, from time to time, for no particular reason, the entire computer screen freezes, and I am forced to hold the power button on my laptop to restart things with a hard reset. I cannot explain why it happens.
Such an issue never occurred in any of the past installations and versions of Ubuntu. This is a fresh installation of Natty by the way.
Also, I can currently be running a lot or nothing and it does this. Thus, it does not matter what I am actually doing (ie, what programs I might be running).
It has occurred about 10 times since I freshly installed Natty 6 days ago.
I started out with Kubuntu RC, then installed ubuntu-desktop and updated all the way to the current state of packages.Anyway, from the moment I installed the RC, from time to time the boot splash appears, the dots light up/turn off and then the booting hags. No key seems to work.I the do a hard reset and everything works just fine.As not to open another thread:- how can I see the Ubuntu splash screen? (currently I can see the Kubuntu one)- how can I turn the splash off and have it boot in text mode?
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
I am using Debian linux. I have 100 timers running. If a timer expired which will generate a signal and it was mapped to a same function handler. All the timers are mapped to one function handler. The problem is if the timer expires one at a time, the function handler called at a time. But if the 2 timers expires at a time, the function handler is called one time only instead 2 times. Is it possible to invoke the function handler as many times based on timer expirary happens simultaneoulsy?
I've got fedora 11 set up to use network time protocol to sync my laptop's date & time when I'm on-line. The question is simple really, I've added a local universality's time server (what is public) and it's live. but it's added to the end of the default time servers what come with fedora. How do I get fedora to just use the local time server, is it a case of removing the default time servers for fedora, but there is a box what says advanced options which are. sync system clock before starting service ???? & use Local time source (( is that the same as the local ntp server that I've got set up ))Hope some body can help me with the network time protocol part of Date/Time settings.
Since the upgrade from Lenny to Squeeze on my Notebook Toshiba Satellite Pro U200 with Intel Pro/Wireless 3945 ABG I have wireless connection problems.The connection breaks time to time and sometimes cannot connect automaticaly after restart. BTW I didn't change anything on the wireless or network configurations on the notebook and on the wiereless router.
In the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
I boot Ubuntu off of an external hard drive just so I don't deal with partitions and crap on the same drive my Windows 7 Ultimate is on. This is a Gateway laptop, BTW. Anyway, after I boot Ubuntu, when I boot into Windows again my time is off by a few time zones.
I installed Ubuntu inside windows(Win 7).Both works good.I found that system time is wrong in both OS.Every time i Change it manually but it changes again on reboot!
I have a Insprion 14R (N4010) and when I hibernate it will usually restore without a problem, but maybe 15% of the time it will reboot while loading. I would like to figure why, since I'd rather not lose anything... My swap space is 5.9GB, I have 4GB RAM (video uses 1gb, so I have 3gb usable)
I'm looking for a program that will digitally display the time in three different cities - all showing at once. I don't care if it is a panel applet or stand-alone. I'm using Suse 11.3 and Gnome.
I have a linux (Slackware) machine and the time/date is like, June 23rd 2003, 10:00am (It's 11 here) and I am not able to set the time to have it correct. I change the timezome to Montreal but the time is still wrong.
Is there a way to force it to sync with my domain controler or even another online NTP server?
I'm just wondering what the limits for time are. I have a program that always takes exactly 20 ms, so I assume this is the lowest it can measure, but I want to see if there's some sort of documentation of this.
My computer has different time when booting to linux or Windows.How to make the time the same?My computer time is 10:57pm Apr 14 when booting to linux.My computer time is 2:57am Apr 14 when booting to Windows Vista Home Premimum SP2.Both OS are set to the same time zone (GMT-5. Eastern Time US & Canada).
get the values for the user time and system time for a process.i have tried getrusage to get values of ru_utime and ru_stimebut these don't seem to be correct
I am hosting two Virtual Servers both running Centos 5.3 on a host machine also running the same OS. The VM software in use is Xen, as supplied with the OS.The host machine's time and date is fine, however both Virtual Servers are running ahead of real time consitantly.Running /etc/init.d/ntpd restart will resolve the issue however one of these is running MailScanner and when the time suddenly goes backwards, sometimes by as much as an hour, it stops working properly.
I don't know why but since I upgraded the KDE 4.4 desktop from openSUSE 11.3 to 4.5, the desktop just freezes some times.
If i was listening music, or watching a video I can still hear everything and even move the mouse, but nothing works.
So I switch to TTy1, perform a init 3, then init 5 to restart all the graphic system, and start again. This happens without message, without log, and without clue...
Should I downgrade to 4.4 or this has a Workaround?
I admit this has been a particularly bad year for me, but it isn't THAT unusual by my standards. I typically spend I would reckon quite honestly about 70-80% of my time with computers just fixing stuff up that either I broke or was broke in the first place. Usually it's the latter by some considerable margin. That's really inefficient, isn't it? I just wondered what others' experiences are of this phenomenon. Obviously I don't do computers for a living or I would have starved years ago. So what is the Panel's consensus view on the percentage of wasted time we should expect to spend, on average, "running just to stand still" on maintenance tasks?
I used the following command to get the unix time of root user creation:
Code: awk -F":" '$1 == "root" {print $3}' /etc/shadow How can i convert this into the date/time of creation?
I am writing a shell script, which determines the OS installation date among other stuff, and i am assuming the root user's account creation date should be a pretty accurate pointer. Are there reasons why i should not be assuming so?I would be open to other suggestion for getting this date/time, but it would nevertheless be interesting to convert the unix time to "real" time without doing complex manual(or otherwise) computation..
