I have a Wacom Bamboo Fun tablet, which as far as I know, is supported. The pressure sensitivity works well on GIMP, then I noticed that it doesn't seem to work in any of the other graphics programs I tried using. Like Pencil animation. (which I know supports pressure sensitivity)
View 1 Replies
I have a Broadcom based PCMCIA wifi card that works great on an older kernel in Debian after a friend of mine did the fwcutter business.
I just installed Backtrack 4 release version on another laptop. While this card works right out of the box the sensitivity is greatly reduced. The built in wifi card (Intel chipset) can see twice as many APs at any given time.
Now, I know that Broadcom chipsets are not the best but this card normally has fantastic sensitivity and Tx power plus an external antenna connector so I really need to get it working properly. When it's working properly under Linux or Windows it blows the competition away.
I've installed Krita in Kubuntu 11.04 and while GIMP works fine with the Wacom tablet (so Xorg is configured properly), Krita responds to the tablet pen as if it was a mouse (so on/off, no pressure sensitivity at all).
I've found old topics about bugs in Qt 4.6 but since we are now using 4.7, I assume those have been fixed?
i managed to install Photoshop over Wine nd it s working like a charm. Installing the Tablet was even more easy, just used Wizardpen (reconized) nd WORKS! But the Pen Pressure aint working, can someone tell me what can i do, because this is the last thing i need for a new life as an Ubuntu user. My tablet is Genius G-Pen M712X nd Ubuntu 11.04.
View 9 Replies View RelatedI use auto-text completion a lot on windows and it works very well.Is there a similar program in ubuntu? I tried one ages ago, cant remember its name, but it really wasnt that great..
View 4 Replies View RelatedDoes anyone know of any Linux program that works like Naturally Speaking?
View 3 Replies View RelatedI am a new ubuntu user but I used linux mint before ubuntu and I had the same problem there. My microphone only works when 1 program is running, but if I load a game or something my microphone stops working.
View 5 Replies View RelatedI've been looking and trying various programs to replace my beloved Wallpaper-Tray on my new Ubuntu 10.04 setup. The problem is, nothing seems to be able to work with my dual monitors like wallpaper-tray did.
Drapes, Wally, Nitrogen, and Wallpapoz are all pretty worthless when it comes to dual monitors. I am looking for something that will stretch my dual-screen wallpaper across both screens like wallpaper-tray did. Drapes comes close by centering a wallpaper in the middle of both screens - but if it can't stretch it across both screens then that's a deal-breaker for me. Not all my dual screen wallpapers are 3840x1200. Also, drapes was giving me errors every time at startup....very annoying.
Or am I just missing something with the programs I've been trying? It's surprising that those programs wouldn't have more options available for dual monitor setups.
What's a good cad program that works with Linux?
Is it possible to do any cad drawings on Linux?
I ve given up trying to run auto cad on Linux no matter how i try it just wont work properly and crashes and I lose what I have done.
Are there any other options apart from QCAD?
Fedora 9 used to support a timed login via the gdm program. This feature no longer works with the gdm that comes with Fedora 13 (gdm-2.30.2-1.fc13.i686 ). I made modifications to /etc/gdm/gdm.schema as follows:
[code]...
Is there something else I have to change now?
I'm using a crypt solution called DriveCrypt(for windows). But now I need a solution that does the same that DriveCrypt does but must to work in both Windows and Linux.Somebody know some software that works in Linux and Windows to encrypt folders?
View 2 Replies View RelatedI can't get a program (wbar) to run directly from my user account, it fails saying "Image not found -> maybe using a relative path?". But if I run su -c "wbar", it shows up and manages to load the image. I think it has something to do with ImLib2 or whatever loads the image. I checked permissions on libImlib2.so.1 and it's world-readable and executable. Can libImlib2.a be causing this problem, set to 644? What else should I be checking?
View 2 Replies View RelatedCurrently our cluster is based on AMD opteron processors. We are going to add more nodes however I want to know is it good to add Intel xeon processors. They both claim to be x86 compatible however I don't know if they are really math each other.Does a program compiled on Intel xeon really works on opteron (amd64)?
View 11 Replies View RelatedUsing a new Ubuntu 9.10 install with Wubi. I go into System > Preferences > Mouse and adjust the sensitivity bars and acceleration with no effect. Anyone got an idea for how to adjust this? It's too slow.
View 1 Replies View RelatedHaving the hardest time turning the mouse sensitivity down in xfce. Various xset settings make no real difference. I move the mouse under an inch and it covers the entire screen easily. razertool-gtk won't recognize my mouse (also, I couldn't find any documentation at all for it, but maybe I'm just dumb), the xfce settings don't lower it enough, and the last thing I was going to try was to edit my xorg.conf. I though there was supposed to be a mouse section there, and this is all I have in my xorg.conf file:
Code:
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
Disable "dri2"
EndSection
Section "Device"
Identifier "Default Device"
Option "NoLogo" "True"
Driver "nvidia"
EndSection
The mouse sensitivity in Ubuntu is a little too high, and no matter how I set the mouse settings its either too sensitive or too slow...or too fast. I have tried many times to find the correct mouse settings adjusting both acceleration and sensitivity but nothing seems to be good. I've tried both my Microsoft mouse and Logitech MX Performance mouse and the same problem is apparent on both. Is there a bug with Ubuntu's mouse settings or something (I'm sure I heard about it some time ago - that the sensitivity settings aren't working exactly as they should be?), and is there any way around it? (or at least, be able to set good settings some how).
View 1 Replies View RelatedI'm using ubuntu. Is it possible to set the mouse acceleration/sensitivity to a value beyond the maximum that is available through System->preferences->mouse ?
View 4 Replies View RelatedI'm having trouble with my mouse wheel. On one click, it pulls down to the halfway point. This leaves me with either dragging the bar around on the right hand side, or using the touch pad. this is a new (to me) notebook, which I haven't had for long. I just can't find where to adjust the sensitivity.
View 1 Replies View RelatedThe track pad on a Macbook Pro 8.3 is hypersensitive and interprets the lightest touch as a click. Even brushing the track pad with the sleeve of my shirt counts as a click. How do I decrease the sensitivity of the track pad?
View 3 Replies View RelatedI'm using Ubuntu 10.10 When my cursor hovers over an icon for not more than a second, if that, the folder opens; it's the same with links. I barely have to touch Firefox, and it comes up. I'd like to be able to click on a folder rather than just pass over it. Surely there must be a setting that can be change
View 5 Replies View Relatedusing gsynaptics to increase the touchpad sensitivity on my macbook 4,1. However,installing gsynaptics makes my fans increase to 6000rpm every 10 minutes. I uninstalled gsynaptics, and it no longer does that.But, I want greater sensitivity! =( its a catch 22.Is there a manual way to increase sensitivity without installing gsynaptics? or another alternative tool?
View 1 Replies View RelatedAfter these last bunch of updates, the mouse sensitivity setting is inversed...
View 2 Replies View RelatedGNU assembler 2.17 (invoked as 'as').
Is there a way of setting no case sensitivity in as?
As above can I turn Case Sensitivity off for terminal in linux?
View 3 Replies View RelatedHow you disable it? it makes no sense you have to type all those non capital and capital letters just to access a directory correctly.
in windows you just type the name and it detects whatever you type capital or not...
Running Lucid, has been a bit glitch here and there, but generally ok. I use Audacity a lot, so need "drag" with the mouse. Also "drag" on the desktop has gone totally now it just opens the file or folder. Any mouse control app that works? Using a ps2 led mouse, it works fine under wine/crossover apps.
View 9 Replies View RelatedIt seems pam_ldap in 11.2 is not case insensitive anymore when it comes to checking usernames with uid from ldap.It is working fine on 11.1 though (both systems with latest updates up to now)(I didn't try 11.3 yet)On our ldap server (which is out of my control), the usernames are not unified, some are all in lowercase and some are capitalized, but on our Linux servers we have all usernames in lowercase.
Since our upgrade to 11.2, the users that their uid on ldap server does not match exactly to the username on Linux servers can not login anymore. Is there any option to change this behavior and force pam_ldap to be case-insensitive or convert uid/usernames to lowercase?
or all of a sudden pam_ldap decided to become case sensitive!?
I just replaced my old Logitech mouse with a Microsoft Wireless Laser mouse, and the scrolling is too fast for my liking.
How can I adjust the scroll sensitivity?
I just updated to 10.04, but still don't see anything.
i have a minor problem with the wacom tablet CTH-461. the gestures and mouse sensitivity with the finger touch is too sensitive... i mean that the mouse is moving really fast and you have to be very careful when you are pinching / zooming with your fingers... and second question. where i have to submit this "bug" bcs the 11.04 is still alpha and i want the tablet to be in final release as much as possible supported.
View 3 Replies View RelatedI am experimenting with attaching a second monitor to my Ubuntu Natty laptop, and I have noticed an annoying "feature" that makes any multi-monitor setup so unusable that I actually prefer my single-monitor laptop setup. It appears that the system automatically "scales" the X- and Y-axis sensitivity of the touchpad to match the dimensions of the "virtual" screen that spans across multiple monitors. This is best illustrated with an example. If I set up two monitors side-by-side, the touchpad's X-axis speed is doubled, so that moving my finger the same distance on the touchpad causes the mouse on the screen to move twice as far in the X direction as it did when I had only a single monitor. Yet the Y-axis sensitivity remains unchanged, so all diagonal mouse movements end up at the wrong angle. This makes the touchpad almost completely useless, since the mouse on the screen does not move in the same direction as my hand on the pad.
Is there anything I can do about this? I just want the X- and Y-axis speeds to be identical, and I definitely don't want my mouse sensitivity changing because I added a screen. The touchpad is a Synaptics touchpad, by the way. The laptop is a Dell M1330 with an nVidia graphics card.
