The mouse sensitivity in Ubuntu is a little too high, and no matter how I set the mouse settings its either too sensitive or too slow...or too fast. I have tried many times to find the correct mouse settings adjusting both acceleration and sensitivity but nothing seems to be good. I've tried both my Microsoft mouse and Logitech MX Performance mouse and the same problem is apparent on both. Is there a bug with Ubuntu's mouse settings or something (I'm sure I heard about it some time ago - that the sensitivity settings aren't working exactly as they should be?), and is there any way around it? (or at least, be able to set good settings some how).
Using a new Ubuntu 9.10 install with Wubi. I go into System > Preferences > Mouse and adjust the sensitivity bars and acceleration with no effect. Anyone got an idea for how to adjust this? It's too slow.
Having the hardest time turning the mouse sensitivity down in xfce. Various xset settings make no real difference. I move the mouse under an inch and it covers the entire screen easily. razertool-gtk won't recognize my mouse (also, I couldn't find any documentation at all for it, but maybe I'm just dumb), the xfce settings don't lower it enough, and the last thing I was going to try was to edit my xorg.conf. I though there was supposed to be a mouse section there, and this is all I have in my xorg.conf file:
I'm using ubuntu. Is it possible to set the mouse acceleration/sensitivity to a value beyond the maximum that is available through System->preferences->mouse ?
Running Lucid, has been a bit glitch here and there, but generally ok. I use Audacity a lot, so need "drag" with the mouse. Also "drag" on the desktop has gone totally now it just opens the file or folder. Any mouse control app that works? Using a ps2 led mouse, it works fine under wine/crossover apps.
i have a minor problem with the wacom tablet CTH-461. the gestures and mouse sensitivity with the finger touch is too sensitive... i mean that the mouse is moving really fast and you have to be very careful when you are pinching / zooming with your fingers... and second question. where i have to submit this "bug" bcs the 11.04 is still alpha and i want the tablet to be in final release as much as possible supported.
Problem: When I change the resolution higher (e.g. 1920x1080), mouse cursor disappear, until I open the terminal / Ctrl+Alt+F1 (~F6), or run other applications. But the main problem is, every time after login, the cursor will disappear (as I know that, before the login, the resolution is 800x600 60Hz, after login, the resolution will be adjusted according to the setting) So, anyone know how to fix this problem?
I have searched many related posts before, some of them told me to upgrade the driver, but it didn't help and become worse (cannot boot up, need to re-install ubuntu) and some of them told me to modify the xorg file, it didn't help, too. (as xorg.conf doesn't exist and I have tried to create one to do the modification, but didn't help) Any other solution?
I'm having trouble with my mouse wheel. On one click, it pulls down to the halfway point. This leaves me with either dragging the bar around on the right hand side, or using the touch pad. this is a new (to me) notebook, which I haven't had for long. I just can't find where to adjust the sensitivity.
The track pad on a Macbook Pro 8.3 is hypersensitive and interprets the lightest touch as a click. Even brushing the track pad with the sleeve of my shirt counts as a click. How do I decrease the sensitivity of the track pad?
I have a Wacom Bamboo Fun tablet, which as far as I know, is supported. The pressure sensitivity works well on GIMP, then I noticed that it doesn't seem to work in any of the other graphics programs I tried using. Like Pencil animation. (which I know supports pressure sensitivity)
I'm using Ubuntu 10.10 When my cursor hovers over an icon for not more than a second, if that, the folder opens; it's the same with links. I barely have to touch Firefox, and it comes up. I'd like to be able to click on a folder rather than just pass over it. Surely there must be a setting that can be change
using gsynaptics to increase the touchpad sensitivity on my macbook 4,1. However,installing gsynaptics makes my fans increase to 6000rpm every 10 minutes. I uninstalled gsynaptics, and it no longer does that.But, I want greater sensitivity! =( its a catch 22.Is there a manual way to increase sensitivity without installing gsynaptics? or another alternative tool?
It seems pam_ldap in 11.2 is not case insensitive anymore when it comes to checking usernames with uid from ldap.It is working fine on 11.1 though (both systems with latest updates up to now)(I didn't try 11.3 yet)On our ldap server (which is out of my control), the usernames are not unified, some are all in lowercase and some are capitalized, but on our Linux servers we have all usernames in lowercase.
Since our upgrade to 11.2, the users that their uid on ldap server does not match exactly to the username on Linux servers can not login anymore. Is there any option to change this behavior and force pam_ldap to be case-insensitive or convert uid/usernames to lowercase? or all of a sudden pam_ldap decided to become case sensitive!?
I have a Broadcom based PCMCIA wifi card that works great on an older kernel in Debian after a friend of mine did the fwcutter business.
I just installed Backtrack 4 release version on another laptop. While this card works right out of the box the sensitivity is greatly reduced. The built in wifi card (Intel chipset) can see twice as many APs at any given time.
Now, I know that Broadcom chipsets are not the best but this card normally has fantastic sensitivity and Tx power plus an external antenna connector so I really need to get it working properly. When it's working properly under Linux or Windows it blows the competition away.
I am experimenting with attaching a second monitor to my Ubuntu Natty laptop, and I have noticed an annoying "feature" that makes any multi-monitor setup so unusable that I actually prefer my single-monitor laptop setup. It appears that the system automatically "scales" the X- and Y-axis sensitivity of the touchpad to match the dimensions of the "virtual" screen that spans across multiple monitors. This is best illustrated with an example. If I set up two monitors side-by-side, the touchpad's X-axis speed is doubled, so that moving my finger the same distance on the touchpad causes the mouse on the screen to move twice as far in the X direction as it did when I had only a single monitor. Yet the Y-axis sensitivity remains unchanged, so all diagonal mouse movements end up at the wrong angle. This makes the touchpad almost completely useless, since the mouse on the screen does not move in the same direction as my hand on the pad.
Is there anything I can do about this? I just want the X- and Y-axis speeds to be identical, and I definitely don't want my mouse sensitivity changing because I added a screen. The touchpad is a Synaptics touchpad, by the way. The laptop is a Dell M1330 with an nVidia graphics card.
In testing that all my bits of hardware work I have come to my 3Dconnexion SpaceNavigator. The hardware is virtually new and works absolutely fine in XP (that is what I am trying to escape from).
When the spacenavigator is plugged in it works absolutely fine so long as I move the thing with a soft feather. It is so sensitive that it is un-useable.My problem is that although the system has recognised it and has it in the hardware scan in YaST but nowhere can I find any way to change the sensitivity settings and button functions.
I just installed Ubuntu 10.10 on my HP Pavilion a320n computer with a ps2 mouse and the mouse pointer points with the bottom of the mouse and not the upper tip of the point. It does the same thing with Ubuntu 10.04.1. In Windows 7 and XP the mouse is normal. I don't know how I could adjust it or is this just a bug in the OS?
I have custom built Linux kernel (2.6.31) and also xorg. xorg is using xserver 1.7.3 . I have an application which simulates the mouse and sends mouse move events. When I switch the device on, the system boots and Xorg comes up, I can see X cursor on the system. When I start sending mouse move events from the application, the cursor do not move. If I attach mouse to the device and then move the mouse, from this point onwards the mouse events get detected from the simulation application. I have checked the dmesg log as follows
BEFORE MOUSE CONNECTED. ..... kjournald starting. Commit interval 5 seconds EXT3 FS on hdb4, internal journal EXT3-fs: mounted filesystem with writeback data mode.
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
I just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
Biggest one that make game unplayable is mouse. Mouse isn't moving smooth it jumps around. I cannot shoot anything. So i asked for help, and everybody just say install windows. And where is fun in that. If people when ever run into problem with some software on linux just install windows. Linux would never go forward. I m not some great gamer, but i would like to be able to play this game. Probably somebody run into same problem. I sow that people talk about something like dis on WOW and wine but simptoms doesn't seem same to me.
CNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20. The only avalible resolution is 1600x900. /etc/debian_version 8.1 GNOME Terminal 3.14.1 xnee 3.19
