Anyway, as I was installing Java, my computer got shut off and now I have the following problem as I try to install anything from the software center:
Package dependencies cannot be resolved.
I cannot download any of the software required and re-installing is a last resort.
cant update give me this error Package dependencies cannot be resolved
This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time.
and when i press in details i have this libgirepository1.0-1
I'm trying to install Open Rocket : [URL]. I don't think I have java installed. I went to software center and tried to install "OpenJDK Java 6 runtime" and it says package dependencies cannot be resolved. I tried doing sudo apt-get install through terminal and it was dependent on a long list of things:
openjdk-6-jre
openjdk-6-jre-headless
tzdata-java
tzdata
I tried to sudo apt-get each one and it led me down the list like that to a dead end.
When I try to install Acidrip I get this message: Package Dependencies Cannot Be Resolved.
Trying to install Acidrip from Synaptic I'm told: Could not intsall or upgrade package. With this additional information:
Depends: mplayer but it is not going to be installed
Depends: mencoder but it is not going to be installed
So, I try to install mplayer and get this message:
Depends: mplayer-nogui but it is not going to be installed
Depends: libx264-67 (>=1:0.svn20090502) but it is not installable
I try to install mplayer-nogui and get:
Depends: libx264-67 (>=1:0.svn20090502) but it is not installable
Now I'm stuck in a point where I can go no further. I really like AcidRip and have been using it for more than two years through all of the upgrades until Lucid.
I've tried installing all of the non-free codecs, both audio and video with no result.
So I tried out Libreoffice and want to revert back to Openoffice for the time being. I uninstalled Libreoffice from ubuntu software center and now I can't reinstall openoffice from USC. i get this error:
" Package dependencies cannot be resolved: This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. " does anyone have a way of fixing this? edit: i've tried sudo apt-get install openoffice.org in terminal but it didn't work as well (i'm total noob)
I've been downloading some new games from the Ubuntu Software Center today.
I tried to install OpenBVE (a railroad simulator) and got the error: "Package dependencies cannot be resolved".
The OpenBVE site mentions dependencies, but is a little unclear on exactly what I need and exactly where to download them.
I try to install Adobe Flash player plugin 10 in ubuntu software center it shows error like this " Package dependicies cannot be resolved. and also i try install iptux that also not showing the installation option.
View 1 Replies View RelatedI need to download lame package to my offline ubuntu [URL] but its involved so many dependencies to download. Is there anyway to ease the pain of downloading each dependencies separately?
View 1 Replies View RelatedSo to give a little background, I'm trying to pass wireshark(with a custom plugin) through my company's build system.The build system functions inside a change root thus all the dependencies need to located somewhere inside the chroot. Wireshark has a massive dependency tree that I couldn't possibly import manually one by one.So my question is, is there a way to conveniently import all the dependency packages somewhere on your local machine. This would mean I would just import the one folder into my change root.PS: the build-system's change-root has SMART package manager installed. But the channels it comes with are local ones(very little to choose from). So an alternative solution would be import therepositories that apt-get uses into smart and then use smarto install the packages which is monumentally easier.
View 9 Replies View RelatedI need to remove libgl1-mesa-swx11, as after I installed it, it has slowed down all my graphics. However, in SPM, it says in order to remove it, I have to remove most of my system, it seems as though it's "dependencies" involve everything to do with graphics, which I was running fine and much better before. So, how do I remove this package without removing dependencies?
View 3 Replies View RelatedI thought KDE is better than Gnome, and installed kubuntu-desktop on my Ubuntu 8.10 to get KDE. But then I found out my computer can't run KDE without serious laag, and now I want Gnome back. I tried switching back to Gnome, but now this is totally messed up. It's half Gnome and half KDE, plenty of bugs, and I got tons of KDE apps that I don't need. So I just want to remove package "kubuntu-desktop" and all it's dependencies. Maybe there's a fast and easy way to do it? I may/will want to do this for some other packages too.
View 3 Replies View RelatedTheres a package I'm going to install that is available only in 32-bit, but I have its dependencies installed as regular 64-bit. Since I'm multilib, will the 32-bit package be able to work with the 64-bit deps?
If not, can 32-bit versions of the deps be installed side by side with the 64 bit?
I have compiled FFMPEG (and also mplayer and x264) from scratch to always run the latest version. I install ffmpeg using "checkinstall". When compiling FFMPEG manual and installing with checkinstall ffmpeg provides the following libraries: libavutil49, libavcodec52, libavdevice52, libavformat52, libavfilter0, libpostproc51, libswscale0
These can NOT be installed via apt-get (or similar) or the checkinstall will fail. So I have not installed them. The problem now is when I need to install a package (.dep or from Synaptic) that requires one of these a prerequisite. Then it is not "registered" by Synaptic that these are already provided through the FFMPEG build. I have tried to use the --provides flag on checkinstall and I can also see in Synaptic that on the ffmpeg package I installed with checkinstall that it says it provides said packages. I even have tried to modify the checkinstall script and add:
Replaces: libavutil49, libavcodec52, libavdevice52, libavformat52, libavfilter0, libpostproc51, libswscale0
This also triggers Synaptic to list that ffmpeg replaces the packages. But still when I try to install anything that needs these packages it is not recongnized that they are provided by FFMPEG and when I install one of them (e.g. apt-get install libavformat52) then it replaces the FFMPEG library and FFMPEG stops working. So what is going wrong? Is this a bug in Synaptic? How is it possible under ubuntu to install manual compiled packages and have them "act" as correct dependencies for others?
I am in fc13, have installed a package, realise lately that its not really useful. that package install a lot of package for dependency.How can i erase all the package together that was downloaded and installed together with the target package as dependency via yum? actually i have done it using #yum erase `cat /var/log/yum.log |grep "Aug 31 22" |awk '{print $5}'|`as I know when I have installed them.....but is there ant safer and better way?
View 1 Replies View RelatedI have installed a package having almost 145 dependencies. Now when I want to remove the package (yum remove packagename) only the single package is removed.. Is there a way to remove the package including all its dependencies?
View 4 Replies View RelatedI am a long-time Debian user (I use it since Woody) and yesterday, due to an unexpected problem on my hard drive and an inexplicable lack of a current Debian cd or a possibility to perform a net install, I had to choose between either stay without computer at home or install one of the two other operating systems I happened to have on cds: Free-BDS or Slackware 13.0. Since I do not have time to learn something that I consider to be more radically different from Debian, I went for Slack.
So, first impressions:
1. Quick and smooth installation, though I got a bit over-enthusiastic when it came to select packages to install and unselected many libraries that I later realised that were necessary for various packages and I had to install them anyway.
2. Configure my wifi was surprisingly easy. I had braced myself for overly-complicated configurations to be done while I'd not have access to google, however rc.inet1.conf was very straight-forward and it provided plenty of examples to illustrate basically every possible configuration. All I had to do was to copy my wpa_supplicant.conf from my Debian backup and it worked.
3.X: For some reason I expected I'd have trouble to properly install and configure X, however my window manager was up and running in a few minutes. I copied my ~/GNUstep folder from my backup gave me the exact same X environment I had in Debian.
4. Package managing and dependencies: (I think I am correct to presume that that has to be the main complaint of most Debian users). pkgtool is very easy to use but, yeah, it does not resolve dependencies.
However, and while I installed a system way more minimalistic than any Debian system I had, I was surprised to find out that:
-Firefox had only ONE dependency
-vlc had none
-xfe, on the other hand, has some obscure dependency that I cannot figure out where to get it (libGLU).
So, a question for more experienced Slackware users: How do you get around the dependencies? Is there a quick way to find out what additional packages you will need on beforehand, or you install the package and try to run it, so to see what libs you need when it fails to start?
So i upgraded from 9.10 to 10.04. when i ran update manager after the install, it had some stuff for OpenOffice and during the update it hung. I powered off the laptop and turned it back on, booted into ubuntu and tried over but it didn't list the updates again.
View 8 Replies View RelatedI am needing to install the geda pcb layout package on my system. The one that is in the repository is a much older version, 20091103, and some projects I need to modify were developed using a newer version, 20100929, and the older one on Ubuntu will not open them. I downloaded the pcb source and ran configure and a couple of dependencies failed that I was able to correct with synaptic. But, then it complained about not having gdlib-config. Which I cannot find that in the repositories. What do I need to get?
View 1 Replies View RelatedI'm trying to install debian in my surface pro but I can't get the network card configured. I installed Arch before and it's wpa_supplicant package was working just fine until the last update. I was wondering if I could download the wpa_supplicant for debian and all it's dependencies from my windows OS to be able to configure my wireless card properly in Debian.
View 4 Replies View RelatedHow do most experienced Fedora users remove packages with large number of dependencies?
I know that the question is as old as yum, but still I can't find solution. There is package-cleanup tool, which supposed to do the job with "--leaves" key, but it doesn't seem to work. Right now I have F12 installed. I installed rosegarden with `yum install rosegarden`. Then I removed it with `yum remove rosegarden`. If I understand right, `package-cleanup --leaves` must show all of 12 dependencies that was installed with rosegarden, but it shows none of them (although it shows few packages). Is this a bug? For years I used Ubuntu and Debian and I was completely satisfied with apt.
While trying to install a package using gpk-application ("Add/Remove Software" under System Tools), I accidentally checked the "Do not show this message again" checkbox, and now gpk-application does not list the package dependencies anymore.
I tried to go back to listing the dependencies, however, I could not find a way to do it. How do I revert to the default behavior, i.e., having gpk-application listing the dependencies again?
So short-term needing a replacement for the various tools MS traps you into to make it easy to work with SQL Server.
I'm going to be using postgreSQL, and I'm wondering what's a good strategy as far as a GUI front-end.
1. No building from source. Don't have the time.
2. Keeps package dependencies to a minimum.
3. Won't require me to use KDE. My dev machine is too old to use KDE productively.
Is there a command that I can use to find out what are the dependencies of a given package.
View 4 Replies View Relatedapt-cache show <package> shows also it's dependencies.yum info <package> does not show dependencies, but it obviously know them.How to ask yum for dependencies of specified package?
View 1 Replies View Relateddpkg -i package.deb
Doesn't install package if it has not-installed dependencies.
What parameters do I miss to install that package with its dependencies from repository?
I'm trying to install a package which is failing these dependencies:
[code]...
I downloaded Gnome2-GConf-1.044.tar.gz and I installed it, but I still the package fails the dependencies, even Gnome2::Gconf. What I can do?
I did a compile and checkinstall of a Debian package (and then deleted the temporary directory tree I compiled in), and had to redo the compile and checkinstall since I screwed up on the dependencies (I think it's item #10) on the checkinstall "menu".
Looking for a quick and dirty shortcut, I was wondering where the post-install dependencies for the packages are stored. Is it in /var/lib/dpkg/status ?
If not, where is the dependency information for installed packages stored?
I want to find out what is the size of a package including its' dependencies.
PACKAGE_SIZE + ALL_DEPENDENCIES_SIZE = WHAT_I_WANT
how do i know the dependencies of the program upon downloading the source code of this application?
View 3 Replies View RelatedI am currently using SUSE ENT x64 v11 SP1. While trying to install various packages I keep getting dependencies error. I tried reinstalling the rpm packages(listed below) and use various versions but seems like no matter what I try it doesn't go away.
Code:
--> Missing Dependency: liby2storage.so.2()(64bit) is needed by package smis-providers-1.0.0-10.29.x86_64 (installed)
Error: Missing Dependency: librpmio-4.4.so()(64bit) is needed by package libsnmp15-5.4.2.1-8.1.x86_64 (installed)
Error: Missing Dependency: librpmio-4.4.so()(64bit) is needed by package kdebase4-SLED-11-25.1.x86_64 (installed) .....
Code:
rpm-python-4.4.2.3-37.2
rpm-4.4.2.3-60.2
rpm-32bit-4.4.2.3-37.8
deltarpm-3.4-103.22
rpm-devel-4.4.2.3-27.1
no broken libs or whatsoever. What am i missing here?