I have experienced this problem a couple of days now.The ubuntu-syncd process seems to create a ubuntuone-sync-<user> process. This restarts in an infinite loop and creates overload and the cpu to overheat.I have stopped the ubuntuone-launch process in the Startup Applications, but this is not really what I want.
View 1 RepliesI have done a clean install of Ubuntu 9.10 (from the CD), single OS on the machine, it seems to be working perfectly alright (better than windows 7 which was previously installed).Only one problem I am facing right now is when I open lot of firefox tabs, I can hear that the processor or fan starts making a lot of noise and eventually system shuts down abruptly, i can feel that the machine heats up. Than I have to wait for few minutes to let it cool and than start again. If i use firefox with (lets say) 2-3 tabs open, it works ok. but when i open over 4-5 tabs, it goes mad.
View 9 Replies View RelatedDell Inspiron Netbook extremely overheats. How can I set it to powerdown, hibernate when not in use without shutting down?
View 1 Replies View RelatedI am considering trying out gentoo linux on my machine and wanted it to compile while I was gone (going to be gone for a week). I just want to make sure that my system will not MELT while I am not there to make sure everything is okay. I have a pentium 4 prescott. Will my computer automatically shut itself down if it overheats? I've heard its supposed to but sometimes is too late. Can I trust it?
View 5 Replies View RelatedI purchased a macbook (for cheap) without a hard drive and decided to go with Ubuntu 10.10 on my new drive.
This laptop has serious overheating issues. I installed the sensor applet and the fans are not coming on, even when the core temp exceeds 167(f). The base of the laptop becomes hot enough to fry an egg on.
I'd like to find a way to make the fans come on in an automated fashion (without having to do it at the command line each time I want them to come on). I'd even be happy with them on all the time if that will resolve the issue, as the laptop overheats until shut down / freeze every time I use it.
I've got Ubuntu One syncing a single 25MB folder on 4 computers. On one of these computers, the ubuntuone-syncdaemon process constantly pegs the CPU, using from 50-80% long after any sync-able files have been modified and successfully synced. The process is only using 8.9MB of RAM.
Specs:
Ubuntu 10.04 (lucid)
Kernel 2.6.32-24-generic
1000.8 MB RAM
Pentium 4 2.53GHz
Free disk space: 280.9 GB
System monitor shows 56.8% total RAM usage, 15.4% swap file usage.
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps, the parameter is the maximum samples per second by which the audio is changed. -async 1 is a special case where only the start of the audio stream is corrected without any later correction.Searching the net makes one believe that this command is just some sort of magic.People just put it in the line and it just works. Isn't that nice?
It says nothing about how to change the TIME the audio starts syncing. Like do I want it to start 5 seconds delayed? Or what about 5 seconds sooner?What if the audio gets more out of sync as the video goes on? Can I slip it a little at a time? What? No magic?No one mentions a file that already has badly synced audio.So what -async 1 really does is simply start the audio at the beginning of the file. LIKE AS IF THAT ISN'T STANDARD PROCEDURE?So what is the exact solution to syncing a messed up video? And why can't it just do the proper "timestamp" sync in the first place?No docs, no info and you are left out in the cold.
I use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.
The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?
I've discovered Firefox Sync a while ago, and it's absolutely awesome. Now of course I'd like most of my software to work this way! So is there a way to get the same behavior with Thunderbird?
View 1 Replies View RelatedIt seems that selinux has stop weav to sync the bookmarks.I followed the fix code as SELinux suggested,but it can't work.Does anyone know how to solve it?
View 3 Replies View Relatedable to get an I pod nano 3rd gen 4gig to sync with Rhythm box or sync rhythm box back to the Ipod?
View 2 Replies View RelatedI've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies View Relatedone tell me the internal working of kill command. that is how it kills a process internally or from where it picks file to continue its process.
View 3 Replies View RelatedI have a high priority service that I start with sudo nice -n -10 process. This process does not need superuser rights though, except for the priority elevation. But nice requires superuser privileges to elevate priority.
View 3 Replies View Relatedsend the details raid configuration how to use in linux el5 and how to indentify the raid degrade process and how to rebuilt the process.
View 4 Replies View RelatedCode:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
[code]....
Description of what the code does or what i intended to do:
1. Created a child process from parent process using 'fork()'
2. Sent a signal 'SIGALRM' from child process to parent process using 'sigqueue' function.
(The Third parameter of 'siqueue' function contains the message (message msg) which the child process wants to send to the parent process.'msg' is a stucture instance containing a) pid of child and b) string) 5. Print the 'msg' sent by child process inside the signal handler function 'sig_action_function' of the parent process I am getting some junk value when this line is executed
Code:
printf("%d
",msg->cpid);
I expected to get the pid of child process, which the child process sent to parent process through the signal.
as we all know Process Scheduler does Process scheduling and its a process as well. I was just wondering that if this happens then the Process "Process Scheduler" should be a part of Process queue as well.
So if there are 5 process are there in Process queue & process scheduler is administrating them then since its also a process, once it puts a process under RUN state it should itself go inside queue because at one instant only one process can get executed on a processor. This is quite confusing for me. Please help me out. I tried to search on this but could not find any relevant topics.
How do you find the parent process of zombie processes?
When the child process is something where the parent is not entirely obvious...
Is there some way to list processes in tree format or something?
I have a shell script to identify whether the process is running or not. If the process is not running, then I execute another script file to run my application. Below is my script and saved this script as monitorprocess.sh Code: #!/bin/bash
result=$(ps -ef | grep -v grep | grep "applicationname.sh" | awk '{print $2}')
echo $result
if [ "$result" == "" ];
[code]...
I have a process running on Linux.When i do ps -eaf | grep <myProcess>, it show muliple entries for <myProcess> with different pids for each entry.Kindly tell me what could be the reason for a process having multiple pids?
View 1 Replies View RelatedIs there any difference in cpu usage for process in init.rc(runs automatic when boot is happened) and manually running process. Will these both have same priority by default...?
View 1 Replies View RelatedI tried googling but didn't get any answer for this.I have a process called "abc" and it is running with PID "123".I have a putty session opened with PID "999".I am giving kill -TERM 123 from putty session.My process "abc" before dying it should catch the PID of the terminal which provided TERM signal to it.Is there any way to find this out
View 2 Replies View RelatedI want ro ran new commandy after sungrid finish his task.Exp:qsub -q bla command1; command2 command2 start only when job of command1 finished.
View 9 Replies View RelatedI've been running my shellscript for about half an hour now. It's taking longer than I thought to process all the data. I have the process ID of it. Is it possible to save the process and log out then log in and continue the process? I know how to pause a process using kill -pause pID and continue it using kill -cont pID. But that only work if you don't log out after pausing it.
View 5 Replies View RelatedI have a shell script to identify whether the process is running or not. If the process is not running, then I execute another script file to run my application. Below is my script and saved this script as monitorprocess.sh
Code:
#!/bin/bash
result=$(ps -ef | grep -v grep | grep "applicationname.sh" | awk '{print $2}')
[code]...
I want to kill parent process after "fork()" method. but if I kill parent process with "exit(0)" method, main() thread is terminated as well so child prosess doesn't work anymore. Is there any way to kill only parent process without affecting to child process?
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]....
Consider the following code:
Code:
int main()
{
int i=0;
pid_t pid;
for(i=0;i<2;i++)
[code]....
I get the following output:
Parent: chid_pid=4356 i=0 parent's pid=4355
This is child 4356 i=0
This is child 4357 i=1
[code]....
I can observe instead of two children(as I expect) processes there are three. This is because child process 4356 creates its own child. Why all the messages of the type "This is child X i=Y" are concentrated one under another? How exactly fork works? Is affected by the fact that I have a dual-core processor?
I need a command to get the process name by process id.
View 2 Replies View RelatedI want to use rsync to synchronize some folders on my LAN. I have this working with two scripts; one runs at the beginning of my work session and gets the latest directory tree from the server, and the other runs at the end of the session to put any local changes back on the server. My "get" script looks something like this:
Code:
rsync -avuzb --backup-dir=/home/user/rsync_backup_dir --delete my_server:/home/bak/common_data/ /home/user/data
This works well, and with the "b" option any file that has been deleted from the master directory tree on the server will be deleted from the local machine and moved to the local backup directory. This is a safety measure to prevent the loss of files through a mistake (on my part).
The problem is the "put" script:
Code:
rsync -avuzb --backup-dir=/home/user/rsync_backup_dir --delete /home/user/data/ my_server:/home/bak/common_data
I want to run both scripts from the local machine, but the "put" script will not save deleted files to a backup directory. I tried using a remote backup directory like "my_server:/home/user/rsync_backup_dir" but this did not work. Is there a way to backup files deleted from a remote server from an rsync script run locally?
Well I've read that 10.04 was supposed to be able to detect and sync to iPhones. It doesn't.
9.10 would sync photos but 10.04 won't even detect it.