Ubuntu :: OSX Sees But Won't Access Shared USB HDD?
Mar 16, 2011
I have three computers; Ubuntu desktop, Windows 7 laptop, and OSX laptop 10.5.8. I have a shared usb hard drive on my Ubuntu desktop. My Windows 7 machine sees and accesses it just fine. My OSX computer sees it in the finder window, but says it can't access it because it can't find the original file. I have tried to "repair the alias" but it doesn't work. I have shared another folder on the Ubuntu desktop, but the new share is on the desktop internal hard drive. OSX can access that share with no problems. What in the world is going on? If Windows 7 can see and access, is this an OSX problem or is there a terminal command that I am missing? I am networking using Samba on the Ubuntu computer and the explorer/finder windows on the Windows7/OSX computers.
View 1 Replies
ADVERTISEMENT
Jul 15, 2011
Trying to use Yast2, and it gives errors: " can't access installation media [url] " and this is with all the repositories that used to work fine. Not sure what it could be? I tried to use a mirror, and I got the same results.
Does Yast2 use a port other than port 80 to connect to the repositories? I have not updated the firewall since using Yast last. Have the repository servers been updated since the release of 11.3, to make some editing of the repositories in Yast necessary?
View 9 Replies
View Related
Jul 11, 2010
I bought a second hard drive, (seagate, 1TB) and followed some instructions about how should i format it. Unfortunately i don't remember where. I ended up with a fully functional disk and copied to it about 400 Gb of data. As far as i knew there was a single 935Gb partition. I needed to shrink the partition to create a smaller one i need in vfat, and every partition manager i tried (gparted, parted, Kde's partition manager, testdisk) sees the disk fine, as a 1TB unallocated space hard drive. I realize, the data was copied directly to /dev/sdb, not /dev/sdb1. I can access the data with no trouble, it gets mounted on boot and on use i have no issue. But i can't edit the partition table, because as far as parted is concerned, it's all unallocated space. I tried running testdisk (even deep) and parted rescue, but they don't see any partitions. Any thoughts? maybe some way of making a new partition table without erasing data=?
View 13 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Feb 27, 2010
I am using RHEL5 in that i have installed samba rpm as well as created samba users while access the shared folders in WINDOWS i got "access dined" error.
View 1 Replies
View Related
Jan 20, 2010
When i first installed ubuntu on my laptop i could access the shared folders i had put on the network with windows through ubuntu, read and write files, copy and paste them etc. I tried recently going to Places>Network and i get this error: failed to retrieve share list from server
It never used to do this, in fact when i went to places the network was not called "network", it was my own title. i can connect to the server with the ip address, but that only lets me take files from the windows network, and not the other way around. I really have two issues
1. cannot place files on the network from my ubuntu laptop
2. cannot connect to shared folder network from places like i could before
View 1 Replies
View Related
Feb 24, 2011
There is a shared drive (on a Samba server using Solaris, I guess) on a machine in our network. In windows, in order to access it I had to map the network drive by providing it's URI (http://blah.domain.com/dir1) and a username and password. How do I achieve the same thing in Ubuntu? While a terminal based solution is all I need.
View 1 Replies
View Related
Nov 1, 2010
I have two computers running for daily use. One is called 'server' and it is powered by Ubuntu 10.04. The other one is called 'workstation' and it runs on Windows 7 professional. On workstation I have created a folder 'Share', which I made shared for 'everybody'. Also I have installed smbclient and smbfs. With the Google I found this link: [URL] But there are errors on that page that have undermined my confidence. How do I access this shared folder?
View 3 Replies
View Related
Jan 2, 2010
spent so much time trying to get Samaba working, but with no luckHere is my smb.confQuote:
[global]
realm =
netbios name = rlx-laptop
[code]....
View 9 Replies
View Related
Jan 27, 2010
So, it took me a few years to come back to Linux. Had used it MANY years ago, and have been meaning to revisit it for some time now and finally have. Tried a couple other OSs that were just, frankly, garbage. But, not Ubuntu! So far, I haven't had any of the issues I've seen posted here. I decided to use my worst system as a test environment - an old Jetta Jetbook 9450. Loaded up with no problems, most noted none of the "searching for drivers" issue that I ran into with other OSs! All that being said, I do have one question - how do I get the laptop to join my network so that I can view my shared drives? In Windows, it's simply change WORKGROUP to my network name. Been flipping through the options, and I'm sure I may have overlooked it.
View 3 Replies
View Related
Feb 13, 2010
I'm looking to set up some kind of a server so my friends can access my music folder. I've managed to set it up so that users on my LAN can do this, but I can't figure out how to make this available on the internet. Is there an easy way to do this? how to set up an FTP server, but none of these tell me how to configure my router, or what IP address I will need to access the folder from the internet.
View 6 Replies
View Related
Apr 8, 2010
When I first start up my 2 computers once the network is established if I try to acces the Ubuntu shared folders from the Win XP machine I get this error:"\localhost not accessible. You might not have permission to usethis network resource.t the administrator of this server to findout if you have access permissions.You were not connected because aduplicate name exits on the network. Go to System in Control Panel tochange the computer name and try again."If I first access the Windows shared files and then go back to the Win machine I get the password prompt and all is well
View 9 Replies
View Related
May 9, 2010
Prior to upgrading from Karmic to Lucid I could access shared folders on my partners XP system. Now when I attempt to connect to the shared folder I am unable to see the folders.When I display the network I can see MSHOME but thereafter end up with the following :"Unable to mount locationFailed to retrieve share list from server"Strangely enough I am able to connect to another Lucid system easily enough from my laptop.In each instance both my Lucid systems and the XP one are connected via wireless and as far as I can see the setup on the XP system is networked OK.
View 6 Replies
View Related
Sep 26, 2010
how i am so new with xubuntu i want to know how to set it up. im so new in xubuntu.
View 4 Replies
View Related
Feb 24, 2011
I always find myself stuck when it comes to sharing folders across networks.
I just installed ubuntu on a pc, with 2 other pc's in my network - one runs Windows XP and the other Windows 7.
When I go to Network -> Windows Network -> WORKGROUP I can see both Windows computers. But when I try to open either one of them, it asks me for a username and password. Now, neither of the Windows machines have passwords (they just login automatically).
(I haven't used Ubuntu since the earlier versions and remember having to go through samba and set up config files, etc.).
View 3 Replies
View Related
Mar 10, 2011
Been using Ubuntu now almost 1 year and love it but I'm still mostly lost so I need someone to explain in great detail how to be able to access the My Documents folder on my LAN XP machine. I've been up and working fine for 6 or 8 months but all of the sudden (maybe it was an update package?) I get the following error message, after a long delay, when trying to access the shared folder:
Could not open location 'smb://office/my%20documents/'Failed to mount Windows share.I have set an icon on the top panel mapped to the XP machine and launched by launcher.
View 4 Replies
View Related
May 7, 2011
After upgrade to 11.04 I have no way to access SMB shared drives using Nautilus. When I click on "Network / Windows Network" I have the message: "unable to mount location failed to retrieve list from server". Couple of remarks: This is a regression It's not only a "Windows" network - this label has to be renamed. The message does not help the average user at all - this is a geeky way of communicating with the end-user.
View 9 Replies
View Related
Sep 1, 2011
I've set up a laptop with Ubuntu 10.04 32bit and shared specific folders on my Win7 PC. Everything should work okay as they both can see each other, but when I try on Ubuntu to access the Win7 shared folder it asks me for username and password. In Win7 I'm always logged in as Administrator with no password set and Ubuntu won't let me connect to it leaving the password blank. It just keeps asking for my username/password over and over again without any kind of error message. It doesn't come up with 'access denied' or anything, it just keeps refreshing the username/password login/connect gui so I can't say which side of the fence the problem is occurring on though I suspect it's on the Ubuntu side.
View 1 Replies
View Related
May 25, 2011
Heres what I have and what I am looking to do. I have a PC with a single core 2 Ghz Pentium processor and 1 gb of RAM. Its pretty limited in what it can do and run. It has two physical HDDs one a 250 GB SATA and the other a 160GB SATA. One the two hard drives I have the following partition structure:
160 GB HDD
28 GB Ubuntu OS Partition
2 GB Swap Partition
130 GB Free Partition (EXT4 but empty)
250 GB HDD
250 GB Free Partition (EXT4 but empty)
What I would like to do is the following:
1. Strip down Ubuntu 10.04 to where only the bare minimums run and system resources (Since they are so scarce on this system anyway) be readily available
2. Have the system run solely as a Samba File server for all other computers in the house to read and write to
3. Allow other "known" systems to access the shared folder without authentication, but any system with an unknown name, should have to authenticate first
4. Have the 130 GB from HDA and 250 GB from HDB, be presented as one network drive of 380 GB as opposed to two of 130 and 250 gb respectively
Are these things that are possible for a person of mid level understanding of Linux? How would one set about achieving all of the above goals?
View 3 Replies
View Related
May 24, 2010
I know how to set up sshd_config for shared key only access. Is it possible however, to set up shared key only access for specific users. Example Users ABCD I want them to only be able to login with shared keys Users EFGH I want them to be able to use a shared key, or if that key gets lost, corrupted or whatever, EFGH can still use a password, keyboard-interactive. How would I go about doing that?
View 3 Replies
View Related
Apr 24, 2010
I have a desktop pc running Windows 7 and a netbook running xubuntu 9.10. What I am trying to do is to access the shared folders on my windows 7 pc on my xubuntu netbook.
View 9 Replies
View Related
May 6, 2010
Computer: Dell Latitude D600
- Ram: 1 GB
- HD: Hitachi ATA HTS541680J9AT00
- OS: Win XP Pro & Ubuntu 10.04 (Kernel
[Code].....
Upgraded from 8.04 to 10.04 and ran Update Manager. After this, sda6, the shared volume where I keep my documents, is read/write accessible from Windows, but read-only accessible from Ubuntu.
I've tried chmod and chown, but in each case, changes to permissions or group are prohibited. So is copying of files to the shared volume, and modifying files (e.g., via OpenOffice).
Additional info: Ubuntu takes a long time to boot after GRUB and during the splash, with the disk drive activity light on continuously.
View 5 Replies
View Related
May 31, 2010
I have created a shared folder via nautilus. I can not access it, because it asks me for user name and password again and again. I'm sure both username and password are exactly right. But I can not access the folder. Only when I check "Allow guest user access" it will allow me to access my data, Which is not secure enough for me.
View 6 Replies
View Related
Dec 12, 2010
I've a question about a connection to a shared folder on a pc behind an ubuntu 10.04 server. The Ubuntu machine itself is behind a Cisco router. Cisco router has a nat 1-to-1 to Ubuntu machine with the static public ip x.y.x.z The Ubuntu machine has one only interfaces eth0 bridged with a virtual tap0 in the virtual br0 interface. This because on the Ubuntu machine is running OpenVPN in bridged mode. I want to reach a private share on the host 192.168.100.2 using the x.y.w.z static IP. Is that possibile? Ubuntu machine has no firewall running (I was not able to run shorewall firewall for now).
View 1 Replies
View Related
Jan 16, 2009
Installed Fedora 10 on my Downloader (just a name for the pc as its mainly used for torrent downloading) computer. But I cant access the fedora shared folder from my windows XP. Accessing XP shared folders from F10 is fine. I have another 2 computer where I have installed Ubuntu 8.10. I have no problem accessing either of the Ubuntu system from my XP computer. The F10 computer comes up fine on my Workgroup list of xp. I double click to go into the F10, a login window pops up and askes for username and password. I used the normal username and root / password to log in. But it keeps popping up for password again and again. BTW, Recently I Installed Win7 Beta on the Windows computer and Surprisingly I can access the Fedora 10 computer shared folder just fine from Win7. But I need to get it working under windows XP.
Here is my smb.conf file
Code:
# Global Settings
[global]
# Network Related Options
# workgroup = NT-Domain-Name or Workgroup-Name, e.g.: MIDEARTH
# server string is the equivalent of the NT Description field netbios name can be used to specify a server name not tied to the hostname. Interfaces lets you configure Samba to use multiple interfaces. If you have multiple network interfaces then you can list the ones. You want to listen on (never omit localhost). Hosts Allow/Hosts Deny lets you restrict who can connect, and you can specify it as a per share option as well
workgroup = THEMATRIX
server string = Samba Server Version %v
netbios name = MYSERVER
;interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
;hosts allow = 127. 192.168.12. 192.168.13 .....
View 5 Replies
View Related
Apr 23, 2010
I've installed Fedora 12 on my laptop and when I share any folder and try to access it over the network using smb://<ip-address/<folder> it says "file or folder smb://..... does not exist"
Now if I simply try to access - smb://<ip-address> on the file browser it shows me shared folders but when I double click I get the same error.
I've SELinux disable, Firewall disable but I'm still not able to access these folders.
I did the exactly same samba configuration on openSUSE and I'm able to access the folder but not with Fedora 12.
View 9 Replies
View Related
May 29, 2010
I have a Belkin router with an external HDD attached to it through the USB port on the router. Every time I try to access it, I get a popup asking for the username, domain name, and password. I have no idea how to gain access to it in Fedora. I can access it fine with windows XP and 7, but get the login screen when using Fedora. I can access my shared files on the xp machine just fine with fedora, but not the external on the router. Do I need to do some extra configuring with samba to get it to work? What is my domain password anyway, I don't ever remember setting one up? Is there a way to find out and just plug it in when the login screen pops up? I am clueless, I tried searching, but everything I come up with involves vpn, which I am not using. If it helps, I sometimes get a similar login screen in windows as well, usually when I first log into either my xp machine or my 7. Its not every time I log in, but it does occasionally happen, I have no idea why. Networking is just not my forte. What I do to get around it is go into a file browser and type in the network location (\192.168.1.1FreeAgent Drive). Once I have done this I can can access the drive by clicking on the map I created in 'My Computer'.
View 2 Replies
View Related
Jan 24, 2010
I'm Using CentOS5.4 and I don't know how to access a windows shared folder over the network
View 1 Replies
View Related
Aug 3, 2010
Currently I am using HP NAS box and we have installed HP Storage Works storage Mirroring on NAS for Replication. Windows 2008 is installed on this NAS box. I have shared a directory as NFS share on this NAS box and allow anonymous read and write access to all machines. I want to mount and access this NFS share directory on one LINUX machine and this Linux machine has Redhat 5.3 Enterprise edition.
1.The issue I am facing here is, I can mount the NFS share on my Linux machine successfully but I can not do read/write on this NFS share. Whenever I try to access this mounted NFS share, I always get error Permission denied. I can do any read/write operation on this mount point. Please provide the inputs to resolve this issue.
2.How do I mount NFS share with user credential and password? Can I share a directory as NFS share with user credential which I can use when I mount the share? 3.Is there any other way to access NFS share by using user authentication and password?
View 3 Replies
View Related
Feb 11, 2010
I have installed samba server one month ago and it was working fine till yesterday but today morning when any network client is trying to access samba shared files by giving smb://<serveripaddress> it is asking for password...that is ok but when he is giving the password it is again opening the same password window to enter password again.The clients are giving correct password that is confirm. At the server side i have run smbclient -L localhost -U% and that is giving proper response so that also means that samba server is working fine so i dont know what could be the problem and what its solution.
View 7 Replies
View Related
