Ubuntu :: OS Crash After Update / Sort It?
Dec 2, 2010
So this is what happen i was updating the system and electricity went out so i cancel the download and close the update manager..when electricity is back i re-select some of the packages for update everything went fine and when installing the updates one error message is generated saying somthing like it is being used my other something and i click cancel and it says restart the system now or later i restart the system and after some time it says--- ubuntu running in low graphics, nvidia kernel fail to load and there is this OK button but nothing work neither the touchpad nor the keyboard i cannot click ok and continue using ubuntu in low graphic mode also.
i tried recovery mode lots od thing happen but it also stuck after this
Begin: running /scripts/init-bottom
Done
and then it get stuck....
one more thing in the update package there are 2 x-server packages...
View 6 Replies
ADVERTISEMENT
Nov 25, 2009
I just installed it on my ancient IBM T-42 thinkpad, and am completely satisfied.
However, I want to help fedora get better.
I keep getting notices that there is some sort of kernel crash.
See cut and paste below.
When I try to use the automatic bug reporting, it fails to do it.
I have attached a screenshot of what happens when it doesn't report it.
View 1 Replies
View Related
May 21, 2011
I don't understand why, but my Slackware is totally crash after ~10min work. My guess is Nvidia is fault. Which logs I could see where the problem is? X (startx) work fine. My video card is: geforce 240. installed slackware 13.37 64 bit.
View 6 Replies
View Related
Feb 20, 2010
I recently installed openSuse 11.2 KDE in a Dell 1535 laptop.
I tried to enable the Cube desktop feature through desktop settings and when I pressed the apply button the system crashed. The screen freezed and the laptop wasn't responding to anything.
So I rebooted the laptop and now every time gets stack in the green screen and trying to load but it never does. I suspect that it has to do with my ATI card because a couple of 3d games would crash the system too. I tried some solutions that I found here like disabling the desktop effects by tweaking kwinrc file but it didn't worked.
Does anyone know how to disable that Cube feature from failsafe mode?
View 2 Replies
View Related
Apr 21, 2011
I'm running Slackware current. After the recent glibc change, ImageMagick display is exhibiting bad behaviour. I open an image with display, left-click on it to get the menus, move the mouse down so I can click on Transform, but before I get there, it crashes and displays this message code...
Has anyone else seen this? Is there a fix for it?
View 7 Replies
View Related
Apr 19, 2009
I've install F10 to use it as server and router and found a strange problem on my XP machine which is behind the F10. I've tried to update my Lineage2 client from official server but the update crash, tried to open the web page it didn't open. Also tried to open microsoft web it didn't open. When i try to open the same pages on PC with F10 they open with no problem.
[Code]...
View 6 Replies
View Related
Mar 8, 2010
Running Karmic on my laptop, I get very occasional kernel panics (suspect it has something to do with the Broadcom WiFi because it only seems to happen with heavy network traffic or HDD access), but just my lucky, this time it Panic'd on me during my recent update -> linux-kernel 2.6.31-20. My system still 'works', but I get the following when doing any other updates, now:
Code:
sudo dpkg --configure -a
[sudo] password for tango:
Setting up linux-image-2.6.31-20-generic (2.6.31-20.57) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing linux-image-2.6.31-20-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.31-20-generic; however:
Package linux-image-2.6.31-20-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (= 2.6.31.20.33); however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.31-20-generic
linux-image-generic
linux-generic
Now I cannot seem to get rid of that, and of course, I am stuck in the prior version. Granted everything 'works' - but it bothers me. What's the best way to go about tracking down and hashing out a problem like this?
View 4 Replies
View Related
Jul 28, 2011
Today I downloaded an update (can't remember which ones they were exactly) and afterwards I was told I needed to restart my computer. But once this happened I couldn't even get to the GRUB menu. before the grub menu was supposed to appear I got this error message
"error: no such device: /ubuntu/disks/root.disk" and
"error: no such device: /ubuntu/install/boot/grub/grub.cfg"
afterwards I get to some command line version of grub where I can type in commands like "reboot" but i don't have my old menu where I just selected the kernel I wanted. I have a dual boot with Wubi if that makes any difference. Does anybody have a way I can recover my copy of Ubuntu, or will I need to reinstall?
View 6 Replies
View Related
Jan 31, 2010
I am on dual boot alongside windows 7 (which works fine). However, when I try to boot into linux I get a few minutes of the ubuntu icon. (sorry for lack of technical terminology). After a few minutes i get terminal sort of screen saying:
fsck from util-linux-ng- 2.16
/dev/sda5: clean, 165561/625856 files, 984444/2502115 blocks
I have attempted to boot from the live cd I installed from and there is no system response from it. How to either uninstall linux from here or just to get it to boot.
View 4 Replies
View Related
May 19, 2010
Whenever i am trying to update my newly installed Fedora 12 it is giving the following problem
code..
What to do?
View 14 Replies
View Related
Nov 21, 2008
I have recently installed Fedora 9 about a dozen times and everytime I apply the recommended system updates, the system crashes upon reboot, leaving me at a dead "GRUB" message (not a prompt). I would love to be able to update my version; suggestions?
View 1 Replies
View Related
Feb 8, 2010
Update manager reported some updates including kernel update to version 2.6.31-19.
after update system won't boot. it crashes into bash shell. I've manually loaded kernel version 16 with following command code...
same thing happened when version 17 came up. I definitely NEVER again going to update kernel. What do I need to do now? should I uninstall latest kernel...if that is possible?
View 2 Replies
View Related
Nov 28, 2010
During update my pc locked up and i shut it down. power button now ubuntu wont start up, it runs straight to busybox, windows starts and runs normaly. i have tried to do some simple fix with a live cd (ubuntu 10.10, the instaled verison is 10.04) but everything stops after a while in the terminal. have tried to install grub + update and upgrad with terminal live cd. have also tried to run the [URL].. but stops when it comes to the partiotn thats ubuntu is on (sda5)disk
have also tried to install 10.10 from the cd, just starts to loading after chosen install.anything i can do in busybox ? must i format the whole disk, including windows ?
View 2 Replies
View Related
Feb 1, 2011
At some point in the last week, my webcam on 10.10 64bit mysteriously stopped working. The OS no longer recognises it as being there. It's an internal cam on a Clevo laptop and before this it's always worked perfectly.
Is there a way I can force the OS to recognise it? Or find out what broke it and fix it?
View 2 Replies
View Related
May 8, 2011
I was upgrading my laptop from 10.10 to 11.04. The laptop crashed part way through the upgrade (fairly far in, at least an hour after downloads completed, a few minutes after grub installer asked some questions). The crash was from another issue besides the update
Now when the computer boots it immediately goes into kernal panic (black screen, flashing caps lock light). when selecting recovery mode, it boots for about a 5 seconds then hangs.
I can however at grub select Previous versions of ubuntu > 2.6.35-28 and it will boot succesffully and run without error. Currently running like this to post this message. For the most part everything looks as if it has upgraded. To things worth mentioning.
Code:
$ sudo do-release-upgrade
Checking for a new ubuntu release
No new release found
[code]....
I backed up my home folder just in case but didn't do a system backup. Wasn't worried if I broke it and had to reinstall, but this doesn't look in my (possibly incorrect) to bad.
View 4 Replies
View Related
Feb 13, 2010
I tried KDE 4.4. I'm back to using KDE 4.3.5. Very bad experience for me, maybe it's just my system openSuSE 11.1 on AMD x86_64 with 4gb memory. Dolphin was unusable. Deleting a file cause it to crash, go in to a directory with a large number (20,000) of images and it would hang and eventually crash. PIM has removed some of the features I used, main one being ability to add Custom Fields to Contacts and assign categories.
In general, the whole thing was slower, not faster, probably because now it requires Neopmunk to be running and the Akondi server. I'll wait a while and try again and see if it gets stable in first update.
View 4 Replies
View Related
Jan 7, 2010
I was running the Update Manager when my system froze due to the failure of Karmic to support motherboards using the Intel 845 chipset.
Although the update did not complete when I rebooted and invoked Update Manager it reported that the system was up to date. How do I reset the system so that I can install the updates?
View 1 Replies
View Related
Aug 4, 2010
I am a newbie in Linux and have only been recently using it. I have faced a problem with my the firefox browser launch. Recently there was a update (to generic version 2.6.32.24) after which the browser fails to start. It gives the message starting Firefox web browser and then dies off. I tried searching for some already posted answers but couldn't find much.
View 4 Replies
View Related
Oct 24, 2010
When i try to install the updates using the update manager, i get the following output code...
View 1 Replies
View Related
Apr 27, 2011
I upgraded an older system from jaunty 9.04 to karmic 9.10/ Following the upgrade, and about six hours of stable use, I ran the synaptic package manager, to pull in fvwm-crystal and a couple of other nits. Synaptic went into its usual tiring Rebuild Index while the resource hog update-apt-xapian ran away gleefully with the cpu pegged. for longer than I've ever seen it... about 15 minutes, and then the system crashed. and, I mean it crashed hard. I have not seen linux do this in years. Not just a seg fault, the whole machine just crashed (cpu, display, keyboard, the works). Restart and no problem, until I ran Synaptic (Rebuild Index. several minutes, crash).I played this game for a while; thinking the system might just might be overheating... let it cool down, and retried.same result. I tried running one last time, and this time pressed the reload (on Synaptic main panel) prior to the crash.it pulled in the repository updates and completed the Rebuild Index. (no crash)
I have run Synaptic several times since that. downloaded some goodies, and have had no further crashes (although, it does run Rebuild Index every time I start it.and update-apt-xapian pegs the cpu while this is going on. The question(s) I have are:
1) I was not aware that an apt these days can bring down the kernel (no panic, no logging, just down....) How is update-apt-xapian tied into the kernel that permits this vulnerability?
2) There appears (from searches) to be a problem with Synaptic or at least with xapian...?? What is going on with this resource pig..?
3) If I disable xapian and use sudo apt-get instead, instead of Synaptic, does this solve this resource problem?
4) Is there another forum area where this might be addressed besides general?
View 4 Replies
View Related
Jun 29, 2011
The update manager gives me this error code...
has anyone experienced this before?
I can't update or download software.
View 5 Replies
View Related
Jul 1, 2011
I have just done a fresh install of 10.10 (full updates) with my new HD 4870, downloaded the last catalyst 11.6 from AMD, I have done the normal procedure of the driver installation, Ubuntu booted correctly, i changed some options in CCC, one of them the "video tearing option" after that X crashed, rebooted the machine, but it stays that way, before the login screen, the X crashes (corrupted image) only reset button restarts the machine.
I removed the installed driver, purged the configurations and started all over using the deb package creation procedure of the driver and also the manual script installation, but it stays the same way, removed again the driver, installed the OSS driver, it logins correctly, tested also with the restricted driver of the Ubuntu repository, it works, but no "video tearing option".
Done a new fresh install of 10.10 (no updates), installed the driver and enabled the "video tearing option", everything is ok, but if I upgrade the kernel the problem returns (if "video tearing option" is enable), i managed to overcome the video tearing option by always enabling VSYNC. After all this, my question is how can I reset CCC settings via command line, the aticonf --initial dont work in this case, CCC is keeping the settings in some config file (I think) that I dont know the location. I want to do some testing, and its annoying to remove, install , reinstall the driver when the X enters this crash loop.
View 4 Replies
View Related
Mar 9, 2010
I need help to resolve this problem, i can't update opensuse 11.2, becouse show me a download error...i tried do it manually but still give me that error.
i opened a terminal and they show me this code...
but if a lock in software repositories, the direction is only this:
Index of /debug/distribution/11.2/repo/oss,
and if i start the software manager, this continue give me that message.
soo please i need help, becouse this is my first time installing this, and i need to give a very quickly s solution.
View 5 Replies
View Related
Aug 15, 2010
I have installed fedora 13 on my laptop and when I try to update the system using update manager system gives me the following error. code...
View 7 Replies
View Related
Jan 14, 2011
Until the latest update to php, claws-mail was running fine. Since updating php through slackpkg, Claws will start but as soon as a message is selected it crashes with the following message (caught in terminal)
root[/]# claws-mail
Newmail plugin loaded
Message header summaries written to /home/pat/Mail/NewLog
Segmentation fault
root[/]#
As usual, I'm lost and wandering in the darkness.
View 2 Replies
View Related
Nov 6, 2009
I've had a working desktop even running compiz just before I updated today. Anyway, after the reboot which was required after my update, I got a notification in the boot message which says:
Code:
Checking for module nvidia.ko: [FAILED]
nvidia.ko for kernel 2.6.30-9-96.fc11.x86_64 was not found. [WARNING]
The nvidia driver will not be enabled until one is found. [WARNING]
I continued logging in and got a white screen (most likely brought by compiz without the nvidia drivers). I hit terminal and disabled compiz then tried to see how nvidia is doing. Here's what I got from nvidia-xconfig:
Code:
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
and finally here's what /etc/X11/xorg.conf contains: .....
View 7 Replies
View Related
Feb 9, 2010
After updating X-Windows (via yum auto-update) I'm having a serious X-Windows problems when using the nouveau video driver. I had to switch over to the vesa driver to be able to start X-Windows. Below you find the Xorg.log file:
Code:
X.Org X Server 1.7.4.902 (1.7.5 RC 2)
Release Date: 2010-02-05
X Protocol Version 11, Revision 0
Build Operating System: x86-06 2.6.18-164.6.1.el5
Current Operating System: Linux localhost.localdomain 2.6.32.7-37.fc12.i686.PAE #1 SMP Fri Jan 29 14:37:28 UTC 2010 i686
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=be-latin1 rhgb quiet rdblacklist=nouveau vmalloc=512MB .....
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the Fedora Project support at [URL] for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) NOUVEAU(0): NVLeaveVT is called.
View 3 Replies
View Related
Apr 12, 2011
Hello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies
View Related
Jan 1, 2011
So I installed this system with the net install disk. I really don't want to do that again. It said it needed one update shortly after install and I figured that a net install would pretty much be up to date and I would be fine to wait on that for a day or two. Wrong. I used bit torrent for about 20 hours and downloaded ~60 GB's to the external hard drive. After a while while clicked the little update button closed every thing else then hit apply.
Walk off, come back and the computer is completely non-responsive and the monitor is not getting a feed from the tower. Not even any num-lock blinky light action on the key board. I gave it a minute or two to show any kind of life then turned it off. It came back on well enough to get online and post this but, like the title indicates, that package manager appears to be broken in some way. In Debian based systems there is a command that clears this up. Is there an equivalent for this distro?
I attempted to finish the update but got this error:
Code:
installation of package failed.
Subprocess failed. Error: RPM failed: error: package NetworkManager-glib-0.8-7.4.i586 is not installed.
Why not just disable that update and see what happens? That's what I said; heres what happens:
Code:
Installation of package failed.
Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....
The above pertains to a fire fox update of some kind. I still have the install disk handy but would rather not wait the 3 hours it takes to download the packages. How I can fix this. I switched from Ubuntu to SUSE because it is supported by online learning soft ware I have access to.
View 9 Replies
View Related
Jul 3, 2011
I changed the user name using the User Properties window and rename the home directory with the new user name. Did not change the Group Name. The new name is ResearLab
When I restarted the system I received an error message:
Gnote Crash
gnote 0.7.3-4.fc14
Following are the messages:
(1) could not update ICE authority file/home/ResearLab/.ICE authority
There is a problem with the configuration server
(2) /usr/Libexec/gconf-Sanity-check-2 exited with status 256
(3) Nautilus could not create the following required folders: /home/ResearLab/Desktop, /home/ResearLab/.nautilus.
Before running nautilus, please create these folders or set permission such that natilus can create them.
A. What did I do wrong? Is it not possible to rename a user in Linux?
B. How can I correct this problem?
C. Should I have created a new user instead or renaming an existing one?
D. Can the primary group be renamed?
View 1 Replies
View Related
