Ubuntu :: Nvidia In Use With KVM Switch
May 3, 2011
10.10 fresh install updated on a dell dimension with an nvidia card installed. So I use to pcs routed through a kvm switch that allows me to switch between them. Whenever I restart this machine the nvidia card thinks I am using a crt monitor and my screen ends up looking like this. If I hook the pc directly the the monitor and save settings it detects the proper monitor and readjusts setting accordingly. This is only good until I restart and then I am back in the same mix. Anyone have a solution?
View 1 Replies
ADVERTISEMENT
Jul 4, 2010
Currently Monitor 0 is the TV (S-video). I want it to be my Monitor. My attempts to change this are failing Seams I'm just tripping over some little thing:
Unbuntu 10.04
Graphics - NVidia 7600
Displays - 2
- Samsung LCD (DVI)
- TV (S-Video)
I do not see how to switch the primary within NVidia's xserver app. Background Info: In order to get the TV out working, I disconnected the Monitor and booted the system - The TV-out then worked for the first time. Reconnected the monitor and rebooted again - both worked..but TV is Monitor0. All other options failed me when I set this up the first time
Current xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
Section "ServerLayout"
[Code]...
View 2 Replies
View Related
Mar 19, 2011
Using Debian Squeeze
I installed the Nvidia installer: NVIDIA-Linux-x8~.86.14-pkg1.run I configured the xorg.conf file and changed the driver from nv to nvidia. I also removed "load dri"
When I use startx I get this error and it won't give me a desktop:
(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available
This is all I remember doing with Lenny. Apparently there is something else I need to do with Squeeze?
View 4 Replies
View Related
Mar 6, 2010
Anyone knows the easiest way to switch from the nvidia drivers to teh nouveau drivers in the latest kernel?
View 2 Replies
View Related
Oct 3, 2009
How do I use the proprietary graphics for my nvidia card?
I use KDE, and I've installed both kmod-nvidia and akmod-nvidia, and when I went to activate the special affects I ran into problems. I had to use Xrender for it to work at all (and that just went really slow) whereas OpenGL just made my screen go black, with a mouse and window borders if I alt+tabbed.
I reinstalled and only have the default video driver installed (nouveau or something like that) and I'm a bit scared to try prorprietary graphics without a step-by-step guide that works, which I haven't been able to find.
View 3 Replies
View Related
Aug 4, 2010
After installing 11.3, I realised that my graphic driver is not working as desired. I have a Compaq CQ60-430SA laptop with an NVIDIA 8200M graphics card. Earlier with 11.2, I had some proprietary NVidia drivers and my graphics were smooth. However, I am not getting the same performance with Nouveau...
As can be seen from the screen clipping below, the images especially in the preview mode and the icons look jarred (highlighted in red). I have no complains with the video but the images and icons do look shabby at times and therefore I want to switch over to the proprietary NVidia drivers.
[URL]
View 4 Replies
View Related
Jun 20, 2010
needed to reinstall 32bit but cannot switch to init 3 for nvidia driver.
View 1 Replies
View Related
Mar 17, 2010
Fairly recent enough system. nvidia 6200.
Full install of slackware. then i use these instructions to install drivers:
Quote:
Install nvidia driver in Slackware Linux
Before begin the nvidia driver installation, you must make a copy of the original /etc/X11/xorg.conf as a backup. Use the copy command example below:
If you choose to install the nvidia driver that you download from nvidia website, you must close kde or x-window and install the driver from Linux command line terminal.
Copy the driver to the directory that you placed all third party software such as /usr/local/src. This is not necessary, just a good habit. To install the driver, run the nvidia driver with the sh command like in the example below.
Now, you just need to answer all the questions to configure nvidia driver and the nvidia installation program will do the driver and kernel installation for you.
When i startx the computer freezes with an underscore in the top left hand of screen and i can't switch between tty's.
I know the pc and card work fine with other linux and win os's.
View 5 Replies
View Related
Jul 28, 2009
Can the fibre channel switch in the centOS5.3 cluster edition be switched for a regular router or hub?
If so how would one do this? If not why does the switch have to be fibre channel?
View 1 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Mar 14, 2011
I am using a Fling KVM switch (by Belkin), to connect 2 computers to my monitor One computer is running XP and the other is running Linux. My wireless switching mechanism has just gone the way of the saints but Belkin has supplied a software solution for this occurrence. There is a small app called Fling (surprising) that allows me to switch from the XP machine to the Linux machine but nothing to switch back to the XP. What I need to know is there a similar app for the Linux computer. (NB I have tried Synergy but have no idea how to set it up - I've been told that synergy might work).
View 1 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Sep 15, 2010
I don't know if you have heard of Nvidia FREE Rendering program, called Nvidia Gelato.
I've logged on thw web, and tried to look it up on the web. I found the webpage, but all the download link's seem to be broken.
[url]
Does anyone know if this is happening for any reason? Am I missing something? If it is broken and there is no other solutionn, Can someone send me the Gelato 2.1 Rendering source for Ubuntu 9.10?
View 4 Replies
View Related
Jan 24, 2011
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies
View Related
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Jan 2, 2010
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
View 4 Replies
View Related
Aug 31, 2010
I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".
After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):
- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html
- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)
- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf
and add the following lines to the end of the file:
#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb
[Code].....
View 2 Replies
View Related
Dec 12, 2010
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Jan 7, 2010
I can't find kmod so I'll go for the Nvidia installer from [URL]. I tried to run it Quote: su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run' but it wants me to kill xserver. How can I do that? " gdm stop" will kill Xserver too? How will I start it again?
View 3 Replies
View Related
Aug 8, 2010
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
View 6 Replies
View Related
Jan 22, 2010
I installed Fedora 12 nowdays and tried to install the driver as Leigh posted in here: [URL]...Well i had some depadency trouble by installing kmod-nvidia and xorg-x11-drv-nvidia-libs.i686. I enabled rpmfusion repo of course. I don't have anything isntalled just the base programs what fedora installs. I updated the kernel and installed kernel-devel aswell.
This is what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
warning: /var/tmp/rpm-tmp.fNroQP: Header V3 DSA signature: NOKEY, key ID 49c8885a
warning: /var/tmp/rpm-tmp.zdIa6C: Header V3 DSA signature: NOKEY, key ID b1981b68
[Code]...
View 1 Replies
View Related
Jun 9, 2010
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies
View Related
Jul 29, 2010
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies
View Related
Apr 3, 2011
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
View 1 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
Nov 28, 2010
I Have just formatted to Fedora 14 64bit and installed kmod-nvidia akmod-nvidia and am experiencing visual lag. The lag did not occur before I installed the drivers, neither did it occur on Fedora 13 with drivers installed.
I have a priitty high spec pc with the nvidia 260 gtx.
just remove xorg-x11-drv-nvidia-libs-260.19.12-3.fc14.i686
so now:
View 1 Replies
View Related
Jul 30, 2010
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
View 2 Replies
View Related
Feb 15, 2011
Whenever I try to "Switch from [username]..." I get locked screen with the options to "Leave Message", "Switch User" or "Unlock".If I click to "Switch User" the password box just disappears (as if one tried to unlock with an incorrect password). The only thing I can do is unlock the screensaver and resume my login session.I can not seem to switch users.Does anyone know why "Switch User" is not working?
View 9 Replies
View Related
