Ubuntu :: Nvidia Screen Flicker Only When SLI Is Enabled?
Jun 12, 2010
I've tried both the x86 and x64 versions of Ubuntu 10.04 and installed the current Nvidia hardware drivers on both. Everything works fine until I enable SLI with the --sli=AFR or --sli=OnOnce SLI is enabled there is extreme flickering relating to anything graphical.Including Compiz effects and any opengl software.Disabling SLI returns the compy back to it's good self.I would love to utilize SLI, however can't seem to find a solution for this bug.
View 2 Replies
ADVERTISEMENT
Dec 11, 2008
Linux newbie here, although I am quickly falling in love.
When playing videos (in Totem 2.24), they constantly flicker. I find that I can fix the problem by disabling Ubuntu's visual effects, after which videos play fine. However I'd rather not have to do that. Does anyone know of a fix for this?
View 14 Replies
View Related
May 13, 2010
I have downloaded the ver10.04. I am running it on my laptop with a NVIDIA GeForce GO 7600 128MB graphics card. I am using the NVIDIA driver on the system. The screen flickers randomly after say every 1 min. By flickering I mean it just refreshes and goes blank for say 1ms during the refresh. It happens even more if I turn on CompViz option.
View 2 Replies
View Related
Oct 4, 2010
All is in the thread title. When I log back in after suspend or hibernate I get a lot of flickering on the screen. I noticed (I think) that it calms down a bit when streaming video from the net, if that gives any clue...
I'm using a dual boot with Vista basic/lucid lynx on an Acer Aspire 5100 laptop.
View 1 Replies
View Related
Mar 10, 2011
I am having a funky issue at login. When I enter my username/password at login with the GUI (I disabled the list of users some time ago) the screen will flicker then return me to the login screen. There is no notification of an error. It doesn't matter if I try the recovery console or safe mode there is the same issue when I try and login with this user. However, I can login with a different user open a console and su to that user that wouldn't login at the GUI.
View 3 Replies
View Related
Jun 16, 2011
I'm getting the occasional full-screen black flicker on my laptop, it's an Asus G73JW with an nVidia 460M card, running the restricted drivers. I've installed Gnome3, and so far like it more than Unity, but the flickering needs to stop
I've also noticed that some animations aren't as smooth as they should be, like when I hit the top-left corner to bring up the dock it studders just a wee bit.
View 9 Replies
View Related
Oct 7, 2010
openSUSE 11.3 KDE There is a frequent flicker on my screen. Some application OR notification just pops and disappears( giving an impression of a flicker ). How do i find out which application OR notification is it.
View 9 Replies
View Related
May 25, 2010
I have LucidLynx installed on my eeepc 1005PE. I am currently using it under the gnome interface but i also have the notebook version of it installed (probably because i got a notebook remix of it, not quite sure). All is well except for the following: after i power up my notebook, login and i can see the panel i plug the power cord in. And the my screen starts flickering in orangeblack colors. Nothing i do seems to take it out of this state but a good old hard-reboot.
View 5 Replies
View Related
Sep 11, 2010
I was on earlier 9.x version of ubuntu with following configuration working perfectly: IBM ThinkPad T60 with ATI Technologies Inc Radeon Mobility X1400 VGA graphics card (found it from lspci) With an external Dell 19" monitor attached to it. I upgraded yesterday to Ubuntu 10.4 LTS and now the Dell monitor screen keeps flickering all the time! I always work with an external bigger monitor attached to my laptop as working for long hours on the smaller screen of the laptop gives me headache. The frustrating point is, this setting was working perfectly until I was on Ubuntu 9.x, I upgraded to 10.04 LTS and this has stopped working.
View 4 Replies
View Related
Oct 13, 2010
Screen flicker Ubuntu 10.10
After installing Ubuntu (Version 10.10 DVD �amd 64Ubuntu 10.10 live DVD).
On the following hardware
Gigabyte GA-K8VT800-RH motherboard
3GB ram
AMD Sempron 3400 cpu.
ATI Radeon X1600 Pro Video card. 256M ddr2 AGP VGA/TV0/DV1-1
p/no 882c85-03
The screen resolution looked very good with all screen resolutions working well The colours and fonts very clear. All other device drivers worked 100%. But unfortunately the display flashes about every 10 seconds and the partial beak up of the display only lasts a fraction of a second and very distracting and is unusable. Testing with Ubuntu 10.10 live DVD. With this months Linux Format Magazine also exhibits this problem. However deleting the partition and installing Ubuntu 10.04 Beta1 DVD -386. And all updates downloaded. Works 100% with no screen flicker.
View 9 Replies
View Related
Dec 6, 2010
My G73JW works really great except for 1 thing. A change in the performance level causes short black flickering on the display, which is absolutely inacceptable (e.g. with compiz). Setting the preferred mode to "performance" locks the performance level and helps but seems like a bad solution (batter life and heat).
View 4 Replies
View Related
Jan 3, 2011
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
View 9 Replies
View Related
Dec 8, 2010
I installed Nvidia drivers n my Fedora 14 and was working just fine!I also have disabled Nouveau to make it work.But after i changed the selinux to permissive my X no longer loads!
View 1 Replies
View Related
Jun 24, 2011
I have triplebuffer set up in the xorg.conf, i am using the squeeze Nvidia drivers (the ancient one), installed debian way.
In nvidia-settings, i have enabled all the entries of sync to vblank, but after i log in, if i go a glxgears, i get 1000+fps, then i start nvidia-settings, the screen flickers when it starts for some reason, resolution is still at native (1366x768), after starting and quitting nvidia-settings, starting glxgears made it 60fps.
How to i make sure sync to vblank is forced? i prefer it this way.
View 1 Replies
View Related
Oct 3, 2010
This morning I ran sectool (in terminal for the first time. Before that I used sectool-gui) and I got this (written to file)...
See attachment please..
I think... the user "Jetty" may be a part of (or has something to do with SQL?).. This machine I have is not a server (in fact I know pretty much nothing about web servers).. this machine is used purely for local app development (python PyQt4/ and C++/wx - making games, general utilities, specialized calculators...etc)
So... Can anyone please tell me who the user "Jetty" is ? (The others are safe, I compiled python/SIP/PyQt4/wx/aliens from source... so that;s probably why it doesn't belong to packages.
Plus, My screen started to flicker some time (could it be possible someone is messing w/ my xorg configs?)
View 1 Replies
View Related
Jun 15, 2010
I've just installed Ubuntu 10.4 alongside Windows. During the installation process, everything was black, then it flickered for a couple of seconds, then went black again. This happened many times. After the installation, I was hoping it would stop, but the same thing happens at the login screen. It flickers for a couple of seconds, then goes black. I figure it has something to do with my display drivers, but I don't know how to install them without using Ubuntu. If it makes any difference, I have an ATI Radeon 4890 video card.
View 5 Replies
View Related
Oct 14, 2010
Whenever I try to change desktop effects to anything other than none, a window appears saying 'Searching for driver' then the screen flashes and it says effects could not be enabled. Here's the output from System Testing Compiz test: Gathering information about your system. Distribution: Ubuntu 10.10 Desktop environment: GNOME Graphics chip: ATI Technologies Inc M96 [Mobility Radeon HD 4650] Driver in use: fglrx Rendering method: None Checking if it's possible to run Compiz on your system. [SKIP] Checking for hardware/setup problems [SKIP] At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia).
View 2 Replies
View Related
Jun 26, 2011
I have new hardware and I'm doing a dual boot, hoping that Ubuntu will be my primary OS, but I'm having trouble ringing it out. I installed Ultimate Edition 2.6.1 and in the past with an old machine I could turn on visual effects. With this machine, when I try to, it says it's looking for a driver, blinks a bit and then comes back with a message saying "Desktop visual effects cannot be enabled."
I assume that I don't have the nVidia driver loaded. When I go to Hardware Drivers, it says "No proprietary drivers are in use on this system." In synaptic, the latest driver does not show up. I followed the instructions on this site that someone put up which required adding some lines to the "Blacklist" then purging old drivers. It said to expect an error and what to do then, but I never got the error. When I tried to do the rest of the commands anyway, nothing seemed to happen. One of the steps was to download the latest driver, which I did. It was a .run file...........
View 9 Replies
View Related
Nov 15, 2010
Hello guys, I've just ran 'apt-get dselect-upgrade' to upgrade some packages, there're few packages I want to keep.
However it changed a lot my customized environment like the login screen and the wallpapers.
I really like the previous login screen but how can I change it back?
The option 'Application > Administration > Login screen' is not enabled.
View 1 Replies
View Related
Feb 26, 2009
I have an ati 2600 mobile. I am running fedora 10 64 bit. If I have compiz enabled when I resume from suspend I just get a black screen with some garbed colors and I have to hold the power button to shut it off. I have tried turing sync to vblank off. It works fine with no compiz. Is there anyway I can get resume working with compiz enabled?
View 11 Replies
View Related
May 30, 2010
I attempted to install the mesa-dri-drivers-experimental package and my screen became unusable when I enabled desktop effects. I then uninstalled mesa-dri-drivers-experimental and tried to install the akmod before realizing that my card isn't supported yet. Now I can't seem to do anyting to get my screen back. I removed the blacklist on nouveau, but my screen still goes black after fedora boots. Is there any way I can just get things back to default without reinstalling the whole system?
View 1 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
Oct 2, 2010
I have an Emachine that my uncle gave me and I thought that Ubuntu would find a nice home in the cozy case and well.....
I have a Emachine el1200-05w AMD Athlon 64 2650e / 1.6 GHz NVIDIA GeForce 6150 SE 2.0 GB mem. and 160GB HDD
I had to fight to get it to install kept freezing and stopping. I finally got it installed. It runs fine and is fast. I like it alot and then after about 5 to 10 min. The screen locks up or will distort in multicolor stripes across the screen. I cant figure out whats going on!
I did just notice that the specs say it's a 64bit possessor and I'm running the 32bit ubuntu will that make a difference?
View 6 Replies
View Related
Dec 28, 2009
I just installed firefox's flash plugin successfully and I can see it in the About:Plugins and it is enabled. But if I go to ..... to stream a video, I just get a black screen instead of the chosen video.
View 4 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Oct 23, 2010
Does any one else have this issue with Ubuntu's Remote Desktop. I am running 10.10 on all my computers and if I try to connect to another PC while it has "visual effects" enabled the screen will not refresh. If I disable effects on the host PC then remote desktop works fine. All PC's running ATI cards with the restricted driver "fglrx". It works but I would like to enable effects on the host.
View 3 Replies
View Related
Nov 11, 2010
I;ve just bought a new machine, and installed Ubuntu 10.10.I've installed the latest nvidia drivers [URL] & vdpau, but can't seem to get rid of the flicker in video playback. There's a horizontal band across the screen thet jumps and flickers when the camera pans. I've tried using vlc, smplayer/gmplayer and xbmc, with various video outputs selected, but I'm getting similar results in all of them.
Machine spec:
Asus M4A87TD/USB3 870 Socket AM3 8 Channel Audio ATX Motherboard
Corsair 4GB (2x2GB) DDR3 1333MHz Memory Kit Unbuffered CL9
AMD Athlon II X2 250 3.00GHz Socket AM3 2MB L2 Cache Retail Boxed Processor
Asus GeForce G210 512MB DVI VGA HDMI Out PCI-E Low Profile Graphics Card
View 3 Replies
View Related
Apr 27, 2010
Anyone using flash with blogtv? I've got a Ubuntu 9.10 box with a nvidia 9400gt card running flash and have run into some weirdness. I get alot of flicker when viewing flash content on sites like blogTV. Also, cannot get my webcam going in blogtv. Webcam is a webcam pro 9000 and works flawless. The problem is adobe flash. I have researched and know that there are problems with flash and linux but whats interesting is that I also run a fedora 11 box and blogtv works fine. The video card in the fedora box is a nvidia 8400 and running flash.
On the Ubuntu box when you go to broadcast you get the flash permissions (allow blogtv permissions on camera) but the buttons do not work. It pretty much locks up in the flash widow only. Also, Viewing content on the site has a lot of flicker. Other sites do not have this flicker. Seems strange that my fedora box works with no problems but the Ubuntu box doesnt. Today Im going to try the beta flash (libflashplayer.so) from adobe version 10.1.51.66 and see what that produces.
View 2 Replies
View Related
Nov 7, 2010
I'm running two conkys through a .sh and they work great, but they flicker. the only way to stop the flickering is to put them in their own window. any ideas on how to stop the flickering code...
View 1 Replies
View Related
Apr 3, 2010
I've installed Ubuntu 9.10 and the prime reason for giving it a go is due to the media center capability with apps such as Moovida and LinuxMce.
Unfortunately during video playback [either divx or flash] there appears to be a random line or lines which flickers on the screen when the video is in fullscreen mode.
I'm using an ATI x1900 video card and have tried using both Tote and VLC, and I have also tried installing the fglrx.
But, both with and without flgrx installed, under the section 'Device' in xorg.conf it says that the driver is 'vesa'.
I don't know how to disable the default ATI driver to enable fglrx, or whether I am going off on completely the wrong tanget and should be looking at something else.
Or is there better support for my type of card in Ubuntu 10 as I don't want to go back to Ubuntu 8 which is the last supported version of the os that ATI developed a driver for my card.
View 1 Replies
View Related
