I'm having trouble getting back Desktop effects when I try to go to the radeon drivers from fglrx. It worked when I first installed and it works on a live cd. My main reason for going back is because A. Brightness settings don't work on my laptop with fglrx. and B. Gnome-shell isn't working with fglrx.
I have a radeon 3100 (I think).
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
I installed the fglrx drivers in Ubuntu Natty for a ATI Radeon HD 4350 graphics card. Although compiz seems to work better, everything seems to be a blurry as compared to the generic graphics or while under Windows 7.For example, every other line displayed here while I type is more blurry than the others.I have a dual screen setup.
View 2 Replies View RelatedI have a problem with the Radeon 5670 and the fglrx driver in opensuse11.2. I've created a rpm from the newest ati*x86_64.run (catalyst10.2, witch should support the radeon 5600 series) and installed it following the "ATI-the hard way" instructions. Here is the resulting Xorg.0.log:
Code:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux sissipc 2.6.31.12-0.1-desktop #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 x86_64
Build Date: 02 November 2009 12:04:43PM
[Code]...
"PCI bus 1 card 5 func 0" seems to be the Onboard-Graphics (Radeon 3200) and "PCI bus 2 card 0 func 0" i think is the Radeon5670 set as primary graphics adapter in the BIOS
I've been using fglrx since 11.3 came out, and I just upgraded to 11.4 today and noticed that my graphics card is now supported by the open-source radeon driver. I was trying to switch, but was never able to properly switch the driver and get radeon running. I've read many of the help pages, but still am unable to actually get radeon working.
Perhaps I'm missing something, such as not properly removing fglrx, but I'm not too sure.
coming back to linux after a few years away and I'm trying to get it set up on my Asus G73JH laptop. Problem is the closed-source drivers aren't playing nice. I can get it to start with the "radeon" driver but when I try to use fglrx, either through a manual xorg.conf change or aticonfig, I get a black screen (or a couple times a white blob moving across the screen) and then the system hangs. The biggest problem with this is I can't access the output from the X server and nothing is being written to the log files (probably because I have to hard-reboot). I've googled and read just about everything I can and I'm pretty much lost for ideas now. I'm not too good with troubleshooting Linux since it's been a while but there are a couple things that would be really helpful to me: a way to save whatever X puts out before the system hangs and a comparison from someone who plays decently graphics-intensive games between fglrx and the open source driver because I don't mind using the open source drivers as long as performance is comparable. Any extra information I can post I will as requested but I think being able to review the X output is a good place to start!
View 7 Replies View RelatedI'm owning an old single Core AMD (Opteron 148, like Athlon 64 3200+), it can't play h264 1080p-Videos without framedrops in active scenes. I'm also owning an not so old AMD/Ati Radeon HD 2400. It's not an UVD2 card, it's not even UVD+, its UVD i.e. UVD1. All articles regarding GPU h264 decoding I've found so far are saying "for vaapi gpu decoding on linux you need to have a UVD2 card". That's wrong! My UVD1-Card is playing fine some demo movies.
Setup:
Ubuntu "Lucid" 10.4
"deb http://ppa.launchpad.net/nvidia-vdpau/cutting-edge-multimedia/ubuntu lucid main" in /etc/apt/sources.list.d/cutting-edge-multimedia.list
[code]....
(With the original Ubuntu Lucid fglrx (8.723) there's some error, I don't remember the words. It doesn't work for me)It's working. I can play h.264 HD Videos with mplayer and decode it with a Radeon GPU. vlc 1.2 not working so far. It seems it's decoding fine, but screen remains green. Here's a screenshot, no fake! It's a two Monitor setup with fglrx' big Desktop. On the right there's running a movie Trailer (I Am Legend) and on the left there's some status info. Quality is not perfect (as you can see, horizontal displacement), but it's basically working.
I have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
View 2 Replies View Relatedi tried setting up fglrx driver for my card using the steps outlined here: wiki.debian.org/ATIProprietary
but when I get to the step where it tells me to use aticonfig i get this error: Code: aticonfig: No supported adapters detected I tried to make xorg.conf myself by doing what it says and making this the xorg.conf file:
[Code]...
but X won't start if I do that (delete xorg.conf and it goes back to it's fglrx-less state) However, I was successfully able to install the drivers on my Ubuntu install (different partition on the same machine) but not my Debian install.
Compiz is utterly unusable, ever since probably about 9.04 or 9.10, when Ubuntu took out the Catalyst drivers for my laptop w/ Mobility Radeon HD 2300 their less capable open-source variants, which crashes after about 15 minutes of use.
The screen gradually becomes less responsive for about 5 seconds, until it just completely freezes and becomes completely unresponsive to any keyboard or mouse commands. I tried using the RadeonHD drivers instead and the problem is still there. The 'Hardware Drivers' app in System > Administration doesn't seem to do detect any fglrx drivers for my system.
How would I get some working fglrx drivers back?
And I don't want to use Metacity anymore.
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
I was using the open source ATI drivers and KDE's compositing worked, so I hadn't installed compiz. I wanted to try fglrx because I thought a) I might be able to get temperature readings, and b) it might stop Kubuntu from making my computer incredibly hot (in Windows 7 it stays cool). So I installed fglrx by enabling it in the restricted hardware drivers thing, and things worked, but compositing was disabled and no matter what I did I couldn't enable it. So I installed compiz. When I run compiz, I get the following output:
Code:
toby@tensile:~$ compiz --replace
Starting kde4-window-decorator
[code]...
Installed Natty a few days ago and everything was working fine. I have a dual head setup with the left monitor rotated Clockwise 90 degrees (AKA rotate left). When I setup the the displays properly, instead of just cloning, I noticed a problem, making Unity unusable. When I apply the rotation either in the xorg.conf fle or using xrandr, the display shows a corrupt looking image. When I turn compiz off and use metacity instead it works perfectly fine.
Display Adapter:
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Cedar PRO [Radeon HD 5450]
xorg.conf:
Code:
Section "ServerLayout"
Identifier "Desktop"
Screen "RightScreen"
Screen "LeftScreen" LeftOf "RightScreen"
[code]....
I'm having problems with my graphics. I have ATI mobility radeon hd 3650 and I get an issue with desktop effects. They can't be enabled even though the card is supported. I had some trouble with installation and used this thread's instructions: http://ubuntuforums.org/showthread.php?p=9133906. I finally seem to have it installed and configured but I still can't use desktop effects. Also this whole process started because I couldn't get minecraft working getting the GLX13 error.
View 1 Replies View RelatedI had Ubuntu 10.04 installed with great compositing performance on my Radeon HD 3450 card, and I installed Ubuntu 11.04 last night. I can't get into anything but Ubuntu Classic (No Effects) to actually use the computer. Whenever I log into Ubuntu Classic (w/ Effects), I can hear the start sound, the panels and some shadows show up, but immediately after they first render, I can't touch anything, shadows disappear wherever I click, and it freezes, forcing me to drop to a tty and kill X.
Whenever I try to start Unity, I hear the start sound, but never see anything but the wallpaper. Also, the screen will sometimes go black for a second or so before returning to the same frozen graphics available previously, and sometimes I can't even drop to a tty after it does this. From glxinfo, everything seems to be in order. Here is the relevant data.
Quote:
direct rendering: Yes
OpenGL renderer string: Gallium 0.4 on AMD RV620
OpenGL version string: 2.1 Mesa 7.10.2
OpenGL shading language version string: 1.20
So far as I know, Unity should support OpenGL 1.5+ capable drivers/cards, and compiz should support even lower requirements. As I said, on the LTS release the drivers performed admirably well, far better than fglrx on the same card- much more fluid, no jerkiness. I can get Unity working with fglrx, but it's quite depressing to watch, and I don't plan on using it when I have an open card that should work well. I am aware that there were recent changes to the kernel to bring in the Gallium driver for R600 cards- I've read something about r600g and r600c and one of them being used in Ubuntu. I'm supposing the recent change is what's causing these issues, and I'm curious about how to change them back or correct whatever is causing these problems.
I'm running PC/OS 10.1, which is based on Xubuntu, I've got Compiz and everything installed on here. However, if I've got Compiz activated when I log out, I find myself with no titlebar or frames whenever I log back in. Thankfully, this is easily corrected by opening the Fusion Icon and going back to Xfwm and then going back to Compiz, where I have the titlebar and frames and eye-popping effects and the whole nine yards. But it'd be a lot nicer to not have to deal with having to correct that every time I log in in the first place.
View 1 Replies View RelatedI accidentally deleted my compiz fusion Icon from my top panel and now I can't seem to get it back. Before 10.04 I could just run Applications/System tools/ Compiz fusion icon and it would appear in my panel. This doesn't work any more! when I run "fusion-icon --no-start" in terminal I get
* Detected Session: unknown
* Searching for installed applications...
* NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING
* Using the GTK Interface
* Decorator "/usr/bin/compiz-decorator" is invalid.
* Setting decorator to Emerald ("emerald --replace")
to back-up and eventually restore compiz settings, is it enough to back-up and restore the .compiz directory in $HOME? Reason is that the setting in my classic gnome set-up are different and partially conflict with the unity settings. Since I want to be able to run both environment (to give Unity a chance) I'd like to be able to switch settings easily.
View 3 Replies View RelatedInstalled compiz to tweak settings and I guess I unchecked the box for unity how can I pull compiz back up with out unity enabled?
View 2 Replies View RelatedI updated system few days back. and Ka-boom! Suddenly my all desktop effects gone. My theme effects of Mac from the theme Macubuntu 10.10 were gone too. I removed Macubuntu and tried to go into visual effects tab in Appearance Preferences, but it says "Mutter is running, Can't switch to other effects." Now, may this mutter is coming in natty narwhal & new, but seriously it's 2D effects aren't smooth enough.. Also I just can't use Alt+Tab which I'm habitual of.
My question is: How to disable this mutter and re-enable my Compiz-Fusion? I tried to kill mutter process from the daemons and start a compiz.. It didn't work.. Instead, I had to reboot my machine everytime I did that. When I remove mutter from sudo apt-get remove mutter.My desktop stays blank after a reboot and I can't access anything.. Thanks to EasyStroke that I'd given stokes to open a new terminal.
I ran the compiz --replace command and I was playing about with Compiz. I wanted to active that rotating desktop cube. The screen froze when I activated it and I ended up doing a hard reboot by pressing and holding the power button.
Now, when I log in, the gnome bar at the top has gone, the window 'decorations' have gone (no minimize, etc) and the new gnome launcher on the left of the screen has gone
Any advice on how to get thing back to the way they were?
I accidentally clicked on Compiz menu and set it to completely transparent. Now when I open the application I cannot readjust it back.
View 5 Replies View RelatedI have updated to FC11 a few months back and after I got my desktop effects going I notice that every time I go to my kde application launcher it takes me back to space 1. I could be in space 6 but as soon as I go to the application launcher to open a new application it takes me back to space 1 and I have to manually move the application to desktop 6. This only happens when compiz fusion is enable...
View 4 Replies View Relatedwhen I boot my pc with fedora 10, it displays the white cube, although i can rotate it but it does not seem to work i cant see any desktops. How can I switch back to the normal desktop view or disable compiz fusion ?
View 3 Replies View RelatedI replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
When I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
As said here: [URl] I want the sphere deformation, but that needs the PPA apparently (I can't find it anywhere in the default compiz Ubuntu 10.10 ships with.) Compiz starts, but it says it can't load plugin 'decoration.'
Code:
Backend : ini
Integration : true
Profile : default
Adding plugins
Initializing core options...done
Initializing move options...done
Initializing resize options...done
Initializing place options...done
compiz (core) - Error: Couldn't load plugin 'decoration'
10.04
I managed to delete the Volume Applet that appears by default on the task bar. I'm sure it used to be listed in 'Add to Panel' in other version of Ubuntu however I can't see it there in 10.04.
Can someone explain to me how I get it back?
I'm trying to figure out a bug with fglrx. Whenever I go to log a machine out, sometimes the screen will go black and never come out of it. Upon reviewing the system logs for XServer, I find the following:
(II) Keyboard2: Close
(II) UnloadModule: "evdev"
(II) Mouse2: Close
(II) UnloadModule: "evdev"
[Code].....
For some reason, going back to the login screen will sometimes cause fglrx(0) to freak out and interrupt the logout process. how to force it to stop doing this or fix this issue? I'm using the ATI proprietary drivers with the latest version.
