Ubuntu :: No 3D Graphics In Natty Beta 1?
Apr 5, 2011
I wanted to try out the Natty beta 1, but apparently it fails to load the graphics drivers. When I run the "Additional drivers" app, no drivers are listed. I installed the nvidia-current package and rebooted, but nothing happened. This problem occurs with an install in a VirtualBox machine, as well as with the live CD. Running Maverick with Compiz and the proprierary Nvidia drivers on a Lenovo T61 with Nvidia Quadro NVS 140, built in 2008. I hope this machine is not too old already to upgrade to Natty?! What can I do to see the fully graphics-enabled Natty/Unity desktop on my laptop?
View 6 Replies
ADVERTISEMENT
Apr 1, 2011
I just tried upgrading to the Natty beta. I am having a problem logging in now. When I boot up I get to the GDM login window and try to log in. Then I get an error message that says: Failed to load session "ubuntu" And then I click log out and it just states me back to the login screen. There is no menu to select sessions or anything on the login screen, just the shutdown menu and the clock.
--Edit-- I fixed part of the problem and I can access my sessions now. I can log in using GnomeShell, but any of the other options result in "failed to load session 'ubuntu'" or "failed to load session 'gnome-classic'". I'm getting the feeling something is broken with Gnome, but I don't know what.
View 3 Replies
View Related
Apr 25, 2011
i have installed Ubuntu 11.04 beta release 64 bit and frequently updating with latest updates(allmost all). now i'm having some problem, while i'm login to GUI interface it shows a blank screen(seems logging) and in the next screen it shows login screen again.(Immediate logout). i found some messages from syslog like below:
acpid: client 2889[0:0] has disconnected
acpid: client 2889[0:0] has disconnected
acpid: client connected from 3034[0:0]
[code].....
View 2 Replies
View Related
Apr 8, 2011
I upgraded from Maverick to the Natty beta a little while ago. It all worked fine for a couple of weeks. Then, this morning, I was unable to boot. I got to GRUB, picked the first option and it went to the Ubuntu 11.04 with the dots, then returned this:
Code:
fsck from util-linux-ng 2.17.2
/dev/sdb2: clean, 330122/2170880 files, 7302496/8683520 blocks
init: udevtrigger main process (367) terminated with status 1
init: udevtrigger post-stop process (372) terminated with status 1
init: udevmonitor main process (366) killed by TERM signal
[Code].....
View 9 Replies
View Related
Apr 11, 2011
My current setup was:
4 x 500 gb hard drives in (software / onboard controller) Raid 10 (1 +0) with Windows 7 x64 as the primary OS
1 500 gb hard drive with Ubuntu 10.10 installed
After upgrading to Ubuntu 11.04 Beta, I hit the Grub Error. I have removed the 5th HDD but still getting it on boot into Windows 7. I am currently in the process of copying all files from my raid via a 10.10 flash drive boot (fortunately was able to mount my raid's partitions).
View 3 Replies
View Related
Apr 25, 2011
I was going to install the Beta for Ubuntu 11.04 using the command update-manager -d. Everything went fine accept the fact that I had maybe two other programs running the same time as the update wich made my computer performance get really high wich ended in overheating and that my computer (using a laptop, of course) shut off. When I started my laptop again it will not go any further than the Ubuntu start screen saying something like "The device / cannot be found or is not ready yet". Can I all my files although I haven't done any backup?
View 6 Replies
View Related
Mar 30, 2010
I am trying to install a PNY GeForce 8500GT HDMI graphics card on an ACER desktop running Ubuntu 10.04. Acer support is nothing.Install card and neither the HDMI or standard monitor work.The fan on the card has power.Remove the card,plug old monitor back in,works fine. Is there a jumper on the motherboard to disable the onboard or something (Command)in terminal? First log is- dmesg, second log is- lspci .
[ 0.008345] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008348] CPU: L2 cache: 1024K
[ 0.008353] CPU: Physical Processor ID: 0
[code]....
View 11 Replies
View Related
May 4, 2011
I just did an install of Natty into a separate partition and incurred several problems. I have a Dell-DXP061 with 4 GB of memory and an Nvidia GForce 7300LE and a Dell 27in. monitor at a resolution of 1920x1200.
Initially it booted in to Ubuntu Classic as expected due to needing a proprietary video driver. So the first thing I did was to install the recommended Nvidia driver and attempted to reboot. It would not start either Unity or Classic. So I did a re-installation and then selected the experimental open 3D driver and was then able to bring up the system in both Unity and Ubuntu Classic. I installed a number of programs including cairo-dock, which I really like, emacs23, and gnucash. I have used gnucash for years and consider it a necessity. However, the Natty version will not display correctly the "gnucash-data" file I created with version 2.2.9 that I have been running on 10.10. This is almost a show stopper for me.
When I try to do a restart, the screen goes black, "Ubuntu" appears with the little dots, three of the dots change color and the system hangs. The system only stops when I hold the power button to effect a complete power outage. Interestingly the LiveCD did not seem to have a problem with restart.
I can see how a causal user might like the Unity interface, but I don't think that I am interested. I guess I will stick to gnome for a while, at least until Gnome3 and then I am not sure where I will go.
View 2 Replies
View Related
Nov 27, 2010
I am trying to use Skype beta on my acer aspire one with ubuntu 10.10. The video runs brilliantly and i can also here my wife from the other end but she cannot hear me. Apparently something is fishy with my mic input. I tried alsamixer and everything is in unmute. My alsa version is 1.0.23. The only think she hears is a loud hissing noise which is normally my bat voice but she doesnt need to know that. I can record my voice in the sound recorder but nothing comes out in Skype!
View 6 Replies
View Related
Apr 4, 2010
So here's the schedule for 10.04:
April 8th, 2010 - Beta 2 release;
April 22nd, 2010 - Release Candidate;
April 29th, 2010 - Final release of Ubuntu 10.04 LTS.
If I have 10.04 beta 1, could I just continue to update and not have to burn another disk to install? Or do I have to burn the beta 2 and reinstall if I want it?
View 9 Replies
View Related
Apr 8, 2010
My update manager still says "updated 3 days ago" and no updates have come through today. Does anyone know if NBR has been automatically updated TODAY from Beta 1?
View 1 Replies
View Related
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Apr 26, 2009
I have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies
View Related
Mar 31, 2010
If I install Lucid Lynx Beta 1, can I go onto Beta 2 and then the stable version just by installing regular updates the whole time
View 1 Replies
View Related
Apr 18, 2010
I was just wondering once the 10.04 LTS is officially released will it be possible to just update the packages of 10.04 beta 2 to make it the official release or will you have to update, or will you have to actually do a reinstall?
View 1 Replies
View Related
Sep 4, 2010
I was running Ubuntu 10.04 and yesterday I decided to test drive the 10.10 beta. After updating to 10.10 and rebooting, all I now get is the login screen with all the icons displaying as an 'X' and more importantly, no actual login prompt. I know just enough about Ubuntu to properly break it, but I am at a loss as to how to fix this, since it doesn't give me the option of opening a terminal.
View 3 Replies
View Related
Apr 28, 2011
when ever i hit check in updates it tells me to check my connection, i have changed sources several times
View 5 Replies
View Related
Jul 15, 2011
I'm about to install Ubuntu 11.04 64-bit, and I'm wondering if I should install that Flash 11 64 bit beta? If so, a couple of questions: Should it perform better than the 32-bit version?
- If I install the 32-bit or an older version before, can I overwrite with the new one or is a full clean install preferred? How do I install it once I download it from here? [URL].. Is it really as simple as replacing the *.so file? Does Chromium/Chrome need this too or just Firefox?
View 4 Replies
View Related
Jan 7, 2010
ok to upgrade to qt 4.6 without getting KDE 4.4 beta. QT has had some huge improvements i hear, and i want them without the betaness of KDE 4.4. I was going to enable the KDE's beta ppa after locking the versions of my KDE, then upgrade just the QT stuff.
View 1 Replies
View Related
Jan 30, 2010
I installed the new flashplayer beta 10.1 and the video is good except it is all a pink haze. It seems to have problems with colors. Im presuming it is to do with a flashplayer installation problem, or could it be my video settings etc ? (eg perhaps my integrated video card can't take the strain ?)
View 9 Replies
View Related
Mar 26, 2010
Very new to Ubuntu, but I was able to upgrade from 9.04 to 9.10 with no problems. New to forum and couldnt find any help in other posts. Like everyone, I was itching to try the newest and greatest. Tried updating last week but had the "openoffice..." bug and wouldn't install. Tried last night and everything went fine, until I restarted the system. Now it won't complete the boot. It show the GRUB, and some other startups, but them blank screen. 10 min later nothing. Tried it 3 more times. I think I am stuck, right? New install?This is what I am thinking of doing- 1. boot from old cd to get my files out. 2. fresh install of 9.10 and be patient for the offical release. Is there anything else I could do?
View 8 Replies
View Related
Apr 17, 2010
i recently upgraded from 9.10 to 10.04 Beta. i am using 64 bit OS. in my computer USB to HDD copy is very much slow. generally i get 20-25MBps copy speed. but from USB the speed gradually goes below 2MBps.
View 2 Replies
View Related
Apr 17, 2010
i recently upgraded from 9.10 to 10.04 Beta. i am using 64 bit OS. in my computer USB to HDD copy is very much slow. generally i get 20-25MBps copy speed. but from USB the speed gradually goes below 2MBps.
View 2 Replies
View Related
Apr 22, 2010
When I tried to update my ubuntu, I received an error regarding the UUID not existing. When I updated, everything on the system was swell, but now I get the UUID does not exist. I reckon that ubuntu 10.04 does not need UUID. I can only run from the ubuntu shell with limited commands. I tried to edit the file /etc/default/Grub and it claimed to not exist. I have 2 separate versions of ubuntu on there, but it's using the grub installed from ubuntu 8.04. It says I'm using grub .97 beta. I am sure I have a brief idea of what to do. The problem is accessing the file necessary to do that. I will have to remove a line that says "LINUX_USE_UUID=true" or something like that. I don't know where that folder is. Apparently people say that its in /etc/default/grub. That doesn't exist for me.
View 1 Replies
View Related
Apr 29, 2010
During the upgrade proses I had lots of errors !anyway my problem happened when I chose keep my modified boot loader and I didn't install the new grub boot loader now .. when I start my laptop I get into the command line $ I have tow HDD (ubuntu/ win7)
View 9 Replies
View Related
Jul 8, 2010
How do you install the Firefox 4 beta in Ubuntu? I'm still trying to understand how to install files that come downloaded in a .tar.bz2 type file. I unpacked this package, but don't understand what to do with it.
View 9 Replies
View Related
Sep 4, 2010
After doing the upgrade from 10.04 64 to 10.10 Beta 64, I have one issue so far: see attachment, not quite sure how to put the problem into words...
View 1 Replies
View Related
Sep 12, 2010
Ok so i have 2 pcs one is running lucid lynx and when I use the command update-manager -d I get the option to upgrade to 10.10 but on my second pc I'm running 9.04 (jaunty jacklope) and when i run the command update-manager -d I only get the option to upgrade to 9.10. so how can I upgrade from 9.04 to 10.10 without having to install the following versions.
View 2 Replies
View Related
