Ubuntu :: New Build - Hard Drive Set Up - RAID & SSD ?
Nov 3, 2010
After keeping my old (laptop) computer going for 8 years, I've finally taken the splash and ordered myself a new PC, well the compoents any way to build myself a desktop this time.
I've just got a couple of questions.
I've got a 60GB SDD and a 1TB HDD. On the SDD I was planning on partitions for Ubuntu Swap Window partition, to run a Virtulisation, not dual boot.
Performance wise, is it best to install / on the SDD and /home on the HDD or /home on the SDD as well and just move music and videos ect to the HDD.
Just to complicate things, when ordering the HDD there was an offer to get a second 1TB HDD for an extra 11, so now I have 2. I was planning to set these up as RAID 1, which I believe I can do via the alternative install.
What would be the best way to then backup / . I guess it must be possible to schedule an image of/ to be copied across to HDD is it?
I did hear that RAID was a bit iffy in ubuntu, but looking about on the net things seem to be better 9.10 → Also the boot disk isn't RAID.
Are there any RAID or SSD issues I should be aware of?
View 1 Replies
ADVERTISEMENT
Jul 21, 2010
In my system i have 3 250 GB Hard drives in a RAID 5 configuration. unfortunately, i cannot see this volume in "Computer", so i am unable to access any of the files on the volume. wierd thing is that when i enter disk utility, it finds the drives, and recognises them as a RAID volume. any ideas on how i can access the files on this drive
View 3 Replies
View Related
Sep 8, 2010
Installed 2nd hard drive, both drives non raid. Computer recognizes it but unable to boot. Is this a grub problem?
View 9 Replies
View Related
Mar 16, 2011
I am on Ubuntu 10.10.I installed it on a 500 gig hard drive.In the future i want to software RAID(I did it in the past using the alternate version of ubuntu from the installation process), is it possible to add the new hard drive later and RAID later or i need to reformat?I am talking about software RAID.
View 2 Replies
View Related
May 30, 2011
Every time I reboot my server, one of my hard drives drops out of the RAID5 array. I'm pretty sure that there's nothing wrong with the drive itself. I bought all three drives at the same time, and they are identical in make/model/capacity. While the server is running, it's smooth sailing. However, whenever I shut down or reboot, I get an email message that the array is degraded. It's always /dev/sda1 that drops out of the array. I can always rebuild the array by adding the partition back in, but it's a bit of a pain. Any suggestions on how to troubleshoot this?
View 13 Replies
View Related
Mar 12, 2010
I would like to setup a CentOS file server with LVM and Raid1. Having 6 x 500GB drives, 4 x 1GB Ram and a Quad Core Cpu, I am considering to configure 3 hdd as LVM then raid 1 to the remaining 3 hdd's.
View 7 Replies
View Related
Jul 28, 2010
I have installed RAID 1 with mdadm and it seems to work looking att /proc/mdstat..I wanted to test the system, so I removed the power cable for one of the disks. When I startup I get this message:
Primary hard drive 0 not found...And cannot start. I'm not sure if there is something in BIOS or in the RAID config? Any ideas?
View 2 Replies
View Related
Apr 13, 2009
how to set up a boot partition on the first hard drive separate from two RAID 5 configurations on a Supermicro server with 1-750GB hard drive for the boot partition, and 15-1TB hard drives for data. The 15 hard drives are split into two RAID 5 configurations (7 -TB drives and 8 1-TB drives). I will be installing CentOS 5.2, and the 15 Terabytes of data will store data, and the 750GB hard drive(on port 0) will only have the 100MB boot file. I am using 3ware BIOS Manager to configure the first array of 7 hard drives, and the second array of 8 hard drives (1 drive with boot information will not be included in the array).
to recap, picture this: I want to load CentOS on this server. /dev/sda1 (on the bottom left drive) needs to house the boot partition set for 100MB. The remaining 7 drives (the left half, not counting the boot drive) need to be set up as a RAID 5 array. The eight drives on the right (right half) also need to be setup as a RAID 5 array. After I configure this in BIOS, I run the CentOS setup disk in graphical mode. I get to the portion after the Language and keyboard setup where it says "Installation requires partitioning of your hard drive. By default, a partitoning layout is chosen which is reasonable for most users. You can either choose to use this or create your own. Select the drive(s) to use for this installation". The drives listed are:
"sda 5721980 MB AMCC 9650-SE-8LP DISK"
"sdb 1020 MB AMCC 9650-SE-8LP DISK"
"sdc 714218 MB AMCC 9650-SE-8LP DISK"
"sdd" 6675643 MB AMCC 9650-SE-8LP DISK"
When I choose "Remove Linux partitions on the selected drives and create default layout." or any other option, I get different errors. I notice when configuring via text mode I get better options to install. I can't install the boot drive separate from the two RAID configurations?
View 3 Replies
View Related
Dec 22, 2010
i have harddrive on which raid 5 is configure and no file system is configured.so i want to access the data on auto raid component harddisk.could any one telme how to access auto raid component hard drive.when im connectingto my laptop its not opening.when i check in disk analyzer its showing auto raid component harddrive.please helpme to access data inside the raid drive.
View 2 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Mar 23, 2011
Ubuntu does not see any hardware RAIDs on this server - Intel confirms that they do not support Debian distros with this onboard SATA controller.
Tried going with CentOS and OpenSUSE ... CentOS would install, but wouldn't boot. OpenSUSE would work but after multiple installs, Samba wouldn't start.
That left us with Ubuntu Server.
While Ubuntu Server can't see a hardware raid, it can see each of the hard drives individually. From there, I created a software RAID during Ubuntu setup and was able to install.
Initially had some issues with mdadm "losing" the hot-spare ... was able to fix that by adding sd[abc][12] to /etc/mdadm/mdadm.conf ...
It worked fine until I plugged a WD MyBook usb hard drive into the machine.
I lose the hot spare (configured on /dev/sdc) because it mounts the USB hard drive there.
I need to be able to make it mount the USB hard drive AFTER mdadm configures /dev/sdc as the 3rd Hitachi hard drive
What needs to be done to make this work?
View 1 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Mar 22, 2011
How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Dec 30, 2010
I'm trying to install a box with Ubuntu 10.04 LTS server with a typical LAMP system in order to replace my old Ubuntu 8.04 server I have at my school to have a "backup" system and also trying to replace NIS authentication with LDAP. Well I'm getting stuck on the first step: installation of base system.
I want to build a RAID-1 system with the two 320GB SATA HD's the machine has, I have a little experience in installing RAID because I installed my old 8.04 server with RAID-1 aswell.
I boot my box from an USB stick with Ubuntu 10.04 Server 64bit, the systems boots well, asks me about language, keyboard and so, finds the two NIC cards and the DHCP configuration of one of the card is done. Then it starts the partitioner.
One of the HD's already contains three partitions with an installation of a regional flavour of Ubuntu, the other HD only contains a partition for backups, I don't want to preserve all this stuff, so the first thing I do is to replace the partiton tables of both HD's with a new one. This is done without problems.
Then I go to the first disk, by example, and create a new partition, the partitioner ask me for the size, I write 0.5 GB (or 500 MB), then I select that it has to be a Primary partition at the beginning of the disk, all goes OK. Once created I go to the "Use as: " line, type Enter and select the option "Partition for RAID volume", when I hit Enter the error appears: the screen flickers in black for a second or two, then it shows a progress bar "Starting the partitioner..." THAT ALWAYS GET STUCK AT 47%!!!
Sometimes the partitioner allows me progress a little further (for ex. lets me activate the boot bit of the partition, or it allows me to make another partiton, even once the error didn't appeared until the first partiton of the second HD!!) but it always get stuck with the same progress bar at the 47%.
I've tried a lot of things: I downloaded again the ISO and rebuilt the USB, same result. Downloaded the ISO and rebuilt the USB from another computer, same result. Unplugged all the SATA and IDE drives except the two HD's, same result. Built a CD-ROM instead of an USB, same result. Downloaded the 10.10 server ISO (not an LTS), and the USB stick can't boot, is another error, but only to try.
[Code]...
View 1 Replies
View Related
Mar 25, 2010
I have a 10x2tb disk array that i'm trying to build into a single software raid 5 i have tried this 2 times now the first it made it to 58.7% and the machine locked up and the array would not restart after a reboot. On my 2nd try all was looking good until about 50% i noticed that the speed dropped in 1/2 and that ksoftirqd/2 is taking up a lot of cpu (about 90%) the md0_resync and md0_raid5 are also taking 60-90% when the build started they took 7%. when i do a dmesg i see a lot of the message compute_blocknr: map not correct.
For a little info on the physical setup this is running on an Atom 510 with 2GB of mem the drives are connected to an addonics 4-Port RAID 5 / JBOD SATA II PCI Controller using the sil3124 chipset. I'm using 2 addonics 5X1 SATA Port Multiplier connected to the controller to get the 10 drives attached. All drive show up and don't seem to have any issues. I'm running a fully updated as of 3/20/10 version of centos 5.4
I will let this continue to run over night but i expect it to be locked up by morning if it follows what the last attempt did.
View 9 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Jan 3, 2011
my linux server is running with an old IDE hard drive getting these hdparm results:
[code]...
i have a WD Raptor drive i'm going to install and put a fresh install of linux on it. i'm just curious, will using a much faster HD as my main drive increase the speeds of my network transfers from the raid drive? do transfers only go as fast as the system drive?
View 3 Replies
View Related
Jan 17, 2011
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
View 7 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
May 22, 2011
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Mar 17, 2010
I want to make a RAID5 array with 4 2TB hard drives. One of the drives is full of data so I will need to start with a 3 disks and then once I copy the data from the 4th onto the array, I will then add the 4th drive. This will be my first experience with RAID. I've spent a few hours searching for info but most of what I have found is a bit over my head.
View 9 Replies
View Related
Oct 30, 2010
I'm using 4 hard drives (1 of which is a sata drive) and i need help installing raid drivers i cant get these hard drives to mount at all
View 3 Replies
View Related
Jun 28, 2011
I would like to setup GRUB on a USB where it automatically detects the available OS installations on the machine that it is plugged into.This could be useful if you messed up your default GRUB menu on a computer and would like to boot into the machine w/out booting Live-OS. Or if you have multiple Live-OS installations on a USB-Drive and would like to add/remove different installations w/out needing to update grub manually.
I know that Grub2 has a OS-prober feature that looks for other installations on the hard-drive, but will that work in either of the scenarios listed above?
View 3 Replies
View Related
Feb 12, 2011
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies
View Related
Feb 25, 2010
i am currently trying to do software raid 1 on a running ubuntu 9.10 system with mdadm. I might have done something wrong and im trying to go back from the beginning. Does anyone know how to remove all the raid info from a harddisk and get it back to its original state.
View 2 Replies
View Related
