Ubuntu :: External Hard Drive "breaking" Software Raid 10.10 Server
Mar 23, 2011
Ubuntu does not see any hardware RAIDs on this server - Intel confirms that they do not support Debian distros with this onboard SATA controller.
Tried going with CentOS and OpenSUSE ... CentOS would install, but wouldn't boot. OpenSUSE would work but after multiple installs, Samba wouldn't start.
That left us with Ubuntu Server.
While Ubuntu Server can't see a hardware raid, it can see each of the hard drives individually. From there, I created a software RAID during Ubuntu setup and was able to install.
Initially had some issues with mdadm "losing" the hot-spare ... was able to fix that by adding sd[abc][12] to /etc/mdadm/mdadm.conf ...
It worked fine until I plugged a WD MyBook usb hard drive into the machine.
I lose the hot spare (configured on /dev/sdc) because it mounts the USB hard drive there.
I need to be able to make it mount the USB hard drive AFTER mdadm configures /dev/sdc as the 3rd Hitachi hard drive
What needs to be done to make this work?
View 1 Replies
ADVERTISEMENT
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Dec 22, 2010
i have harddrive on which raid 5 is configure and no file system is configured.so i want to access the data on auto raid component harddisk.could any one telme how to access auto raid component hard drive.when im connectingto my laptop its not opening.when i check in disk analyzer its showing auto raid component harddrive.please helpme to access data inside the raid drive.
View 2 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Jan 17, 2011
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
View 7 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Mar 22, 2011
How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies
View Related
Nov 3, 2010
After keeping my old (laptop) computer going for 8 years, I've finally taken the splash and ordered myself a new PC, well the compoents any way to build myself a desktop this time.
I've just got a couple of questions.
I've got a 60GB SDD and a 1TB HDD. On the SDD I was planning on partitions for Ubuntu Swap Window partition, to run a Virtulisation, not dual boot.
Performance wise, is it best to install / on the SDD and /home on the HDD or /home on the SDD as well and just move music and videos ect to the HDD.
Just to complicate things, when ordering the HDD there was an offer to get a second 1TB HDD for an extra 11, so now I have 2. I was planning to set these up as RAID 1, which I believe I can do via the alternative install.
What would be the best way to then backup / . I guess it must be possible to schedule an image of/ to be copied across to HDD is it?
I did hear that RAID was a bit iffy in ubuntu, but looking about on the net things seem to be better 9.10 → Also the boot disk isn't RAID.
Are there any RAID or SSD issues I should be aware of?
View 1 Replies
View Related
Jul 21, 2010
In my system i have 3 250 GB Hard drives in a RAID 5 configuration. unfortunately, i cannot see this volume in "Computer", so i am unable to access any of the files on the volume. wierd thing is that when i enter disk utility, it finds the drives, and recognises them as a RAID volume. any ideas on how i can access the files on this drive
View 3 Replies
View Related
Sep 8, 2010
Installed 2nd hard drive, both drives non raid. Computer recognizes it but unable to boot. Is this a grub problem?
View 9 Replies
View Related
Mar 16, 2011
I am on Ubuntu 10.10.I installed it on a 500 gig hard drive.In the future i want to software RAID(I did it in the past using the alternate version of ubuntu from the installation process), is it possible to add the new hard drive later and RAID later or i need to reformat?I am talking about software RAID.
View 2 Replies
View Related
May 30, 2011
Every time I reboot my server, one of my hard drives drops out of the RAID5 array. I'm pretty sure that there's nothing wrong with the drive itself. I bought all three drives at the same time, and they are identical in make/model/capacity. While the server is running, it's smooth sailing. However, whenever I shut down or reboot, I get an email message that the array is degraded. It's always /dev/sda1 that drops out of the array. I can always rebuild the array by adding the partition back in, but it's a bit of a pain. Any suggestions on how to troubleshoot this?
View 13 Replies
View Related
Mar 12, 2010
I would like to setup a CentOS file server with LVM and Raid1. Having 6 x 500GB drives, 4 x 1GB Ram and a Quad Core Cpu, I am considering to configure 3 hdd as LVM then raid 1 to the remaining 3 hdd's.
View 7 Replies
View Related
Jul 28, 2010
I have installed RAID 1 with mdadm and it seems to work looking att /proc/mdstat..I wanted to test the system, so I removed the power cable for one of the disks. When I startup I get this message:
Primary hard drive 0 not found...And cannot start. I'm not sure if there is something in BIOS or in the RAID config? Any ideas?
View 2 Replies
View Related
Jan 3, 2010
So I recently got a WD MyPassport external hdd with 500gb capacity. I formatted it to NTFS so that it would be more efficient transferring data between my Ubuntu and Win7 dual boot. But now I want know if it is possible for me to create a 100gb FAT32 partition on the external without destroying the data on it.
View 7 Replies
View Related
Jan 4, 2010
My Toshiba 500Gb USB hard drive is not being detected anymore when i insert it in 9.10. It only started doing this from last week, it was fine before (and it works fine in Windows XP). The connections are fine and all, because when i type "lsusb", i see it as follows:
Bus 001 Device 003: ID 19d2:0063 ONDA Communication S.p.A.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0930:0b09 Toshiba Corp.
[code]...
View 9 Replies
View Related
Jan 5, 2010
Is it possible to use Ubuntu for a malfunctioned external hard drive?A year ago my external hard drive malfunctioned and I cant get into it, though it plugs in alright and the computer recognizes it, I'm hoping that maybe precious files havent been wiped and are just stuck in there.Is there anyway that Ubuntu can help?Also, if there is, what exactly is the first thing I do or type into the terminal?
View 1 Replies
View Related
Jan 16, 2010
I'm trying to get ubuntu 9.04 to recognize a Maxtor One Touch III USB external hard drive. This drive has been formatted and used on a Windows XP. I cleared everything off but am trying to see if I can arrange it so that I can back up from linux and access (if need be) from a Windows machine.
Here is what I get with fdisk -l:
/dev/sda1 * 1 14219 114214086 83 Linux
/dev/sda2 14220 14593 3004155 5 Extended
/dev/sda5 14220 14593 3004123+ 82 Linux swap / Solaris
View 6 Replies
View Related
Jan 18, 2010
I am having problems mounting an iso on my external hard drive. I do not want to move it onto my linux partition because it is 3.6 GB. I have a directory made (/media/iso) that I would like to mount it in, but if that doesn't work then I don't care where it goes. After I mount it I want to be able to run it using Wine, but that will come later. For now I just need to get it mounted. And, of course, I am fairly new to linux/ubuntu.
View 2 Replies
View Related
Feb 1, 2010
I have a 250GB external hard drive that I want to format to ext4. It will be used to store back ups of my documents, music and pictures. I tried booting the Ubuntu 9.10 Live CD (amd64) and using gparted to delete the partitions that where on the hard drive leaving only unallocated space, then creating one new partition that was ext4. I clicked apply and after a short time it said all operations completed successfully.
Now the problem is it won't let me transfer any documents onto the hard drive, or even create a folder or file. If I go into the properties of the hard drive, under the permissions tab it says I am not the owner...?
View 7 Replies
View Related
Feb 2, 2010
I just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
View 9 Replies
View Related
Feb 23, 2010
I've been checking the Forums and I can't find anything similar to my problem yet. I have 2 external drives that my UBUNTU 9.10 doesn't recognize, although I can see them perfectly in Win XP.I was using them in Ubuntu until 2 weeks ago, when this problem started and I can't find a way to see/mount them again. GPARTED doesn't find any of them; and when aply fdisk -l, can't see them either (only my internal HD).
View 2 Replies
View Related
Mar 29, 2010
I have another question. When again restart the computer, I lost everything I had installed before. I am sure there is option somewhere to be turned on. I do not know where it is? Is there anybody can tell me where it is? I have installed UBUNTU on the external hard drive.
View 9 Replies
View Related
May 5, 2010
I have an external hard drive on which many of the folders are showing up as plain text files.
View 2 Replies
View Related
May 7, 2010
can just buy any External Hard Drive and it will work on ubuntu 10.04? If not could you tell me the brands that do Work.
View 2 Replies
View Related
May 10, 2010
I run 10.04 lucid in a laptop with EXT4 as filesystem, and I tried to mount an external hard drive from a Windows that, obviously, uses FAT32. Its the first time I try to mount a hard drive (external) since the upgrade to 10.04. Do I have to download some packages via synaptic? If not, what do I have to do?
Plus, I have run
Code:
sudo fdisk -l
and this is what I get
[Code]...
View 2 Replies
View Related
Jun 17, 2010
I have an external hard drive which connects to a usb port. until recently i could unmount it by right clicking on the desktop icon and selecting unmount. now when i try that it tells me that i can't because the device is not in fstab and i am not the root. i checked mtab and it had this line '/dev/sdb1 /media/usb0 msdos rw,noexec,nodev,nosuid 0 0' i changed that to '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' thinking that would fix it, but it didn't. i unmounted using 'sudo umount /media/usb0' and restarted my computer and now the line in mtab reads '/dev/sdb1 /media/usb0 vfat rw,noexec,nodev,sync,noatime,nodiratime 0 0' and i still can't unmount without using the sudo umount command. i also tried adding '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' to fstab and that didn't help
View 2 Replies
View Related
