Ubuntu Networking :: Solve DM9601 USB NIC Adapter On Mac OS X 10.4, OS X 10.5?
Aug 5, 2011
I'm the System Administrator in a Government printing press and we are using eMacs and MacPro, there was this thunder storm and blown all the network ports and the management bought DM9601 USB NIc network adapters to be used before finding other altenatives but they are not working on the OS X. What should i do? Is there any driver for it or any special configuration on the Mac Os X 10.4 and 10.5?
View 1 Replies
ADVERTISEMENT
Aug 17, 2011
No wireless after upgrading to linux kernel 3.0 in opensuse 11.4. I'm using Kde and gnome 3, everything was working fine under the 2.6.39 kernel, but now both only detects my wired connection. Any help resolving this would be greatly appreciated. I have a Netgear WNDA3100 adapter that uses the Atheros drivers. It also is no longer detected in my Fedora 15 after upgrading the kernel, but it still works in Mint 11 with the 2.6.38.8 kernel.
View 9 Replies
View Related
May 14, 2010
I installed Ubuntu on one of my machines a few days ago. It was an oldish CD containing 9.10. Eveything was puppies and rainbows. However, today I updated that machine to 10.04, and it no longer sees my network. Specifically, Windows doesn't see shares on it, and it doesn't see shares on Windows. Further, when trying to make a share (or rather update the one I had previously) I get the following:
Quote...
Again, this is already the newest version.
And, being that I have no real idea what I'm doing, this is where my Googeling skills fail me. I want to reiterate, though, that before I updated today, networking was fine in both directions, i.e. from windows to ubuntu and from ubuntu to windows. How can I get networking to work again?
View 2 Replies
View Related
Jul 21, 2010
I can't connect to apache from outside the LAN. I can connect to everything else (ssh ftp) from outside.
I'm getting Error 101 (net::ERR_CONNECTION_RESET): Unknown error
My router is configured to redirect port 80 to my webserver. I am getting access logs etc and error logs for missing files (favicon)
View 1 Replies
View Related
Aug 2, 2010
I am trying to find someone that can perhaps assist me with the following.
I have installed my notebook with Ubuntu 10.0.4 and need to setup various VPN connections to clients.
After setting up the microsoft VPN connections according to the normal procedures, I try to connect to one of the clients to test connectivity, but the connection fails.
This happens for all the MS vpn's so far.
I had a look at the daemon.log file and found the following message which I can't seem to find a solution to:
<WARN> connection_state_changed(): Could not process the request because no VPN connection was active.
Is there anyone that could perhpas assist me with this as I am not able to work without VPN.
View 3 Replies
View Related
Mar 25, 2010
I'm a total NOOB and I just finished a dual boot Ubunutu Studio 9.10 64bit/Windows 7 x64 install on a brand new i7 PC using a WD10EARS hard drive (with the new Advanced Format) and I gave myself top marks for getting by the mammoth amount of obstacles to accomplish what I have so far.
Item of note: you can NOT do a complete install with Ubuntu Studio 9.10 using a wireless device. The installer ONLY recognizes motherboard ethernet ports. No worries, I moved it to the office and the LAN line and got a complete install. I am using this in my living room though as a Media PC with MythTV and the distance requires me to use WIRELESS.
After a successful install, I was unable to get my brand new, out of box Netgear WG111v3 to establish a successful connection and I need your help. Pardon the length of this post, I will try to organize it as best as I can but I have done a LOT of troubleshooting before posting here. Here's what I did so far:
1. Tested Wireless in Win7 on same PC. Works GREAT! Rebooted, went into Ubuntu Studio 9.10 and got no joy.
2. This page says the WG111v3 works out of box with Karmic and I can state with 100% certainty it does NOT.
3. Went to this page (which is THE best how to out there) and followed instructions. I discovered a bug in wpa_passphrase immediately. I use a very complex passphrase using !#$&@ characters in the mix. wpa_passphrase dies with various errors when it sees these characters because it thinks they're command items rather than part of the text in my key. Try it yourself. Create any long text string with those characters and input it to wpa_passphrase. It dies. Works fine with regular letters/numbers. I had to use this page to get the HEX value for my passphrase so I could complete my interfaces file. On a hunch, I changed my passphrase on the router to be a simple 10 letter word all in lower case. wpa_passphrase changed that to HEX fine, updated interfaces file, rebooted router and PC and got nothing. So it's NOT the passphrase.
4. Went to this page, which again states it works out of box but doesn't and tried all the help there. NO JOY.
5. Tried here too. The help there is good when combined with #2 above but still nothing.
6. Went to unsupported versions of Ubuntu to try some old school tricks. Got nothing.
7. Found this site and it has EXACTLY my problem! I always end up with "No working leases in persistent database - sleeping." when it tries to get an IP address from the router. As you can see, that user found no fix either.
8. I turned off ALL security on the router and left it wide open, updated my interfaces file appropriately, rebooted everything and it still couldn't connect?
View 9 Replies
View Related
Apr 23, 2010
No wireless upon re-installation of 9.10 Drivers seem installed. No wireless networks detected. code...
View 6 Replies
View Related
Feb 20, 2010
I'm new to ubuntu and using 9.10. I have installed a dlink wua 2340 wireless adaptor and it is working properly. But after waking up computer by standby mode, wireless connection breaks and the wireless device is not mounted. Therefore I always have to shut down the computer and restart again to establish wireless connection.
View 1 Replies
View Related
Apr 13, 2010
I have a Dell Inspiron 1525. I am unable to connect to wireless networks. I have a fresh installation of Ubuntu 8.04. I have installed Ndiswrapper (ndiswrapper-utils_1.8-0ubuntu2_i386.deb) and the GUI for ndiswrapper. The ndiwrapper GUI reports that the hardware was not found. Yet I am able to connect to the wlan using Windows.
View 3 Replies
View Related
May 30, 2010
I recently did a clean install of Ubuntu 10.04 and tried using a DLink DWL-G122 dongle for a wireless connection.
It seems to connect to the wireless router, but I cannot seem to access any websites using the wireless connection. Ethernet connections to the computer work perfectly, but ethernet isn't ideal.
The results of the lsusb command is code...
View 3 Replies
View Related
Oct 11, 2010
I'm unable to get my Ubuntu 10.04LTS to see my Mac 10.6.4 machine.
I've got Samba and AFP enabled under the Mac file sharing preferences.
Attempt1: From Ubuntu, I can see my Mac under Network>Places, but I'm unable to mount the location.
Attempt2: In Ubuntu, I went to Places>Connect to Server and entered the following:
Service: Windows Share
Server: [name of my mac]
Share: [name of my shared folder]
Folder:
User Name: [username]
Domain Name: WORKGROUP
With this entered, I was able to get as far as being prompted for my password, but was still unable to connect.
Attempt3: I followed the same steps above, but left Domain Name blank. Still nothing.
Are there any docs out there for the correct steps? I can only find posts on getting Mac to see Ubuntu, but not the other way around.
View 1 Replies
View Related
Jan 26, 2011
I tried installing the mac80211 framework on ubuntu 10.10 but after i install it and restart my system , none of my network connections work.
i found a solution to that problem which is a very weird solution. because none of the network connections are working . i try to activate the wireless driver from the System->Administration->Additional Drivers. But it fails , but after it fails my wired network connection comes back online. and then i have acccess to the internet . After that i activate the wireless driver again and it works.
This is obviously the worst possible solution ever. So what i don't understand is why the mac80211 framework is causing these problems. after applying my "solution" i thought of checking the modules installed on my system using lsmod and i see mac80211 there. i don't understand why it is still there after i executed the "sudo make uninstall" command . code...
View 4 Replies
View Related
Feb 21, 2011
I configured an internal fake ip 192.168.1.11 on a virtual interface of my server.
I'm running one of my postfix instances on this ip.
The problem is that postfix can't talk to external hosts on the internet when running from this internal ip 192.168.1.11
I get an error in the mail log
Feb 21 22:43:00 localhost postfix-R1/smtp[11372]: connect to 7zips.com[109.169.46.199]:25: Connection timed out
It works fine when I run postfix on real ips, but I need it to work from the internal.
I thought it should just work.
Am I missing anything?
View 13 Replies
View Related
Aug 29, 2010
I use Ubuntu 9.04 and try to get a Sweex LW053 USB wireless card (Ralink RT73/RT2500 chipset) to work. According to the Wiki list in the sticky thread, this one should work "out of the box" since 8.04.
lsusb delivers
Bus 002 Device 002: ID 148f:2573 Ralink Technology Corp. RT2501USB Wireless Adapter
and there is also some wlan0 entry that doesn't look too dodgy when typing ifconfig.
From this I get that my laptop recognizes the card.
I also typed in some numbers such as SSID and DNS server address in Preferences>Network Connections where asked (although the information that I had wasn't 100% what was asked for so I tried to guess what needs to be filled in which fields).
However, I don't get an internet connection (Firefox can't find server...)
What else do I have to (or can I) do?
View 1 Replies
View Related
Aug 11, 2011
I'm new to linux. I've just installed Ubuntu 11.04. It has all been going ok, but the wireless just stopped working all of a sudden. The indicator light turned off and when I tried to turn it back on (Fn+F2) nothing happens. Sometimes, when I restart the computer, the wireless might work; but if the signal is lost the LED on my laptop turns off and I cannot reconnect. Also, in these strange cases that the wireless works when I restart I can manually turn it off (Fn+F2), but nothing happens when I try to switch it back on.
In the menu on the upper right corner I see 'Enable Networking' is checked, but 'Enable Wireless' cannot be modified.
I have a Dell Inspiron 6400 and the wireless device is an Intel Pro/Wireless 3945ABG.
I have tried to follow some of the threads on this forum on similar cases, but the ones that were comprehensible to me did not work (or I actually might not have understood them either). code...
View 1 Replies
View Related
Aug 3, 2010
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
View 1 Replies
View Related
Jun 19, 2011
I installed the Kde desktop and i'm unable to setup a broadband dsl connection
i have done the settngs in network manager gave password username service name etc.
but the option for connection doesnt appear
the connection works properly in windows as well as gnome 3 desktop but not in kde
View 3 Replies
View Related
Sep 28, 2010
I can't port forward to ftp behind my firewall, I tried several attempts but none worked.
Can anyone help me solve this?
View 10 Replies
View Related
Feb 16, 2010
Just installed 9.10 netbook remix on my acer aspire one - No Wireless !
search showed all kinds of comments but few solutions most just claimed it worked or others tried madwifi without success.
View 2 Replies
View Related
Apr 24, 2010
I just purchased Buffalo Nfiniti Wireless USB Adapter (WLI-UC-GN) but have no idea how to get it to work in Ubuntu. My previous adapter (a D-Link) just had to be plugged in and it was ready to go. The WLI-UC-GN adapter lights up (stays solid though), but no wireless networks are found. I believe Ubuntu sees the adapter, it just isn't working with Ubuntu.
I have read a few other posts but them a little confusing. If any one could please help me and keep it simple (I'm fairly new to Ubuntu); I would be grateful. By the way, I just upgraded to Ubuntu 10.04 from 9.10 last night hoping I am also using WICD Network Manager because I heard it's better than the native manager.
View 9 Replies
View Related
Aug 26, 2010
I have installed ubuntu lucid 10.04 release, and i want to install a wireless adapter usb or pci in my desktop. Can somebody recommend me a model that works fine?
View 3 Replies
View Related
Aug 27, 2010
Is there anyway to get this adapter working with Ubuntu 10.04 at all?
View 1 Replies
View Related
Jan 12, 2011
I am running a dual boot PC, Ubuntu 10.10 & Win7. I do sticky static IPs on my local network, but it doesn't work cause the Ethernet adapter gets a different MAC address in Windows 7 (EF:9F:E9:F7:F7:F7) than it shows for Ubuntu 10.10 (00:13:74:00:5C:3. I am not sure if this is a Windows problem or something up with Ubuntu. The card is an on-board Atheros L2 fast Ethernet adapter. I have tried updating the drivers in Windows & nothing is working.
View 8 Replies
View Related
Jan 26, 2011
I have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).
View 9 Replies
View Related
Jun 17, 2011
I've got a couple of old PC's running Ubuntu but I want to give them wireless capability and move them to a different room. What is the easiest wireles adapter to use? I'm thinking USB would be easier than opening the boxes to install cards, plus I could buy one adapter and try it with both PC's to make sure it works, then buy a second one once I know it works.
View 1 Replies
View Related
Jan 13, 2009
As I am struggling to get my Netgear WNP111 to work with ubuntu 8.10 ,can someone recommend an adapter that will work out of the box with ubuntu 8.10 .
View 7 Replies
View Related
Jan 1, 2010
I am trying to get the above wireless adapter o work with Ubuntu. I have installed ndiswrapper but I am unsure what windows driver I need that will work with it.
When I type lsusb I get the following: Bus 001 Device 002: ID 0df6:0042 Sitecom Europe B.V.
I tried searching the ndiswraper site but all I could find was Sitecom WL-344 300N X2 Wireless USB Adapter that pointed me to Driver: rt2870.inf and rt2870.sys (on Windows XP).
I am not sure if this will work or where to download these files, so I was wondering if anyone else has this adapter that could shed some light onto how to get it working.
Edit: I just tried the rt2870 driver and it didnt work
View 1 Replies
View Related
Jan 3, 2010
Basically a few weeks ago I decided to try Linux, in particular Ubuntu. I have it installed in my Windows 7 partition but now I am willing to take the full plunge and switch to it all the way. The only issue is I cannot connect to wireless internet. It states "device not ready". Wireless is turned on on my laptop, I am very near the source, have tried making a manual connection with the network setup. I tried the hardware tester and it found my ethernet and wireless hardware (Broadcom 802.11g Network Adapter).
I went to the package thing and looked for Broadcam. I found a package but it was already installed. I tried it manually with:
sudo apt-get install bcmwl-modaliases
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
I then heard to try "sudo apt-get install bcm43xx-fwcutter" and did but it couldnt find it.As stated before I am new to linux so I'm probably missing something easy I just beg your patiance as I learn this new operating system.
View 4 Replies
View Related
Jan 5, 2010
I managed to get the older, weaker box on the net and running simply by plugging in the Belkin N-wireless adapter, discovering the Network Manager icon (this really should also be accessible from the system pull-down menu), left clicking to see all the local networks, selecting mine, and inputting the security key, and rebooting. Voila!)However, on the newer, more powerful box, the network Manager gives me nothing but "Wired connection" at every boot (there is no such connection), I created a wireless connection under the settings (accessed through create VPN settings), but the Manager sees no wireless networks. Reboot solves nothing Network Manager is not seeing anything, I suspect that the card although powered by the USB, is not being seen by the system.
View 8 Replies
View Related
Jan 7, 2010
I have a Belkin N150 USB Wireless Network Adapter and a Belkin N150 Wireless Router. I cannot seem to get NetworkManager to connect to the internet. I have blacklisted the 9.10 staging driver and associated rt files. I have downloaded and built the ralink 2.3.0.0 driver. The light flashes on the usb but I cannot connect to internet.
lsusb output:
jerry@jerry-desktop:~$ lsusb
Bus 002 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:09c2 Logitech, Inc.
Bus 001 Device 005: ID 050d:935b Belkin Components
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod output:
jerry@jerry-desktop:~$ sudo lsmod
Module Size Used by
rt2870sta 554908 1
iwconfig output:
jerry@jerry-desktop:~$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ra0 Ralink STA ESSID:"11n-AP" Nickname:"RT2870STA"
Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thrff Fragment thrff
Encryption keyff
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not sure what the ra0 is telling me but what about the Access Point: Not-Associated statement? Does that mean that the network adapter is not connecting to the router?
View 1 Replies
View Related
