Programming :: Send A Packet Through Sockets C++

Feb 1, 2011

Can someone help me with this problem,trying to send a packet,using tcp/ip,the packet should look like this:

Code:
field 1: SOCKS protocol version, 1 byte (0x05 for this version)
field 2: status, 1 byte:
0x00 = request granted
0x01 = general failure
0x02 = connection not allowed by ruleset
0x03 = network unreachable
0x04 = host unreachable
0x05 = connection refused by destination host
0x06 = TTL expired
0x07 = command not supported / protocol error
0x08 = address type not supported
field 3: reserved, must be 0x00
field 4: address type, 1 byte:
0x01 = IPv4 address
0x03 = Domain name
0x04 = IPv6 address
field 5: destination address of
4 bytes for IPv4 address
1 byte of name length followed by the name for Domain name
16 bytes for IPv6 address
field 6: network byte order port number, 2 bytes
and this is my code:

Code:
int domainLen = strlen(domain);
char reply[domainLen + 7];
reply[0] = 5; // version
reply[1] = 0; // succed
reply[2] = 0; // reserved
reply[3] = 3; // its a domain
reply[4] = domainLen;; // lenght of domain
for(int j = 0; j < domainLen; ++j)
{
reply[j + 5] = domain[j];
}
reply[5 + domainLen] = 80; // port
reply[20] = '�';
Send(reply, sizeof(reply));
domain is "www.google.com". Am I doing it right ? I dont know much about bits.

View 6 Replies


ADVERTISEMENT

Programming :: Send A Request To A Http Server Without Using Sockets.

Jul 8, 2011

Hi, is it possible to send a request to a http server without using sockets?

View 7 Replies View Related

Programming :: Send A UDP Syslog Packet With Source Port Set To 514

Jan 25, 2010

I am trying to generate a UDP syslog packet from my C application. But I am facing a problem with a Cisco Router ACE that does not like the Source Port being '0' and thus drops the packet.How can I specify the Source Port in the UDP header to '514' as stated in RFC3164 (Section 2: Transport Layer Protocol)? "It is RECOMMENDED that the source port also be 514 to indicate that the message is from the syslog process of the sender"

View 1 Replies View Related

Programming :: Perl - UDP Server Receive / Send Packet To Host

Apr 1, 2010

I have found many examples out on the www for creating udp servers with sockets. The problem I am running into is after I receive the packet from a host I need to be able to send a custom made packet(I'm using RawIP / NetPacket to make my packet) back to this host. The only way to do this is seemingly through the send() function. This function however doesn't appear to allow me to specify which host to send my packet to.

View 2 Replies View Related

Ubuntu Networking :: Send The Keys Or Value As The Packet Data (content Of The Packet) In Ns-2 (for Wireless Environment)

Jul 12, 2010

I am the new user to ns-2. I would like to know is it possible to send the keys or some value as the packet data (content of the packet) in ns-2 (for wireless environment).

View 1 Replies View Related

Networking :: Packet Generation - Info On Sockets In Kernel Level?

Jul 14, 2011

I am learning about net filters and I am practicing some sample programs on it. I am very new to this and I have a general query. I got the packet to a desired function using PRE_ROUTING hook. Now how do I frame a packet from this point? I am just trying to simulate a echo client server program in the kernel level using these hooks. Any useful info on sockets in the kernel level?

View 1 Replies View Related

Networking :: How To Send A File Using Sockets ?

Jun 25, 2010

Hi ,

I created a socket.port no 21 meaning ftp client.
I am sending some stings and receviing some data from server.Fine.

But I want to send a file some x.c to host using socket.
Please can someone help me whether we can do it or not.
If we can how can we send a file.I was only able to send buffer and data but not a file.Please if possible can you help me with example.

Regards,
shaiva

View 2 Replies View Related

Networking :: How To Send Udp Packet To The DNS Using Netcat

Jun 16, 2010

How can i send udp packet to the DNS using netcat in opensuse.

View 7 Replies View Related

General :: WOL - Send Magic Packet?

Apr 1, 2011

As i am posting in this forum you might already have guessed that I am a total linux noob, but I am a pretty faster learner. I know a few basic things but I feel like I am stuck with my problem.I want to send the Magic packet (wake on LAN) from my linux machine to another, but I am unsure how to approach this. I have google�ed my ass off but I am none the wiser. I found a few forums posts and programs that can do the trick and guides in how to use the programs but I have no idea how to install them.You have to know that my linux machine is a NAS server and has therefore only Konsole access (no GUI). As I said before I am pretty much a noob

View 16 Replies View Related

Red Hat / Fedora :: Determine Network Interface That Will Be Used To Send Packet For An IP?

Apr 9, 2010

I'm writing to you because I encountered the following problem. My program displayes all network interfaces that are available in the system, but I would like to adda functionality in which a user can enter a destination address IP (ex. the IP address of the Google search engine) and will get information which network interface will be used to send it. As I know it is associated with reading information from routing table in the system. Maybe you know the API (functions/methods) which I could use to do it in RedHat ? I program in C/C++, but if you know how to do it in other programming languages (Java, Perl, Python) I will be grateful for any information.

View 4 Replies View Related

General :: Kernel Crashed When The Module Tries To Send IPv6 Packet?

Oct 10, 2010

I am facing problem(system gets crash) while I try to send IPv6 packet by using my kernel module. I have given the code and makefile for my module. I will appreciate if any one shares any tester module for sending IPv6 packets.The kernel version that I am using is 2.6.9 and it supports for IPv6.

file name: rtp_pkt_tx.c
#include "linux/kernel.h"
#include "linux/module.h"
#include "linux/skbuff.h"
#include "linux/init.h"

[Code]...

View 1 Replies View Related

General :: Root Privilege Required To Send A Wake-on-lan Magic Packet?

Sep 28, 2010

On Linux, is root privilege required to send a wake-on-lan magic packet? If it depends on how you send the magic packet, please let me know under what situation root is required.

View 1 Replies View Related

Programming :: PING Using Raw Sockets In C?

Nov 18, 2010

Is there any way to implement a simple ping script in C (unix)? I'm programming simple OpenWRT scripts.

I have found some examples of ping in C:

[URL]

However, nothing happens, nothing is sent.

When I look at the code, in the portion where the socket is created, I can see that the socket is not binding to any interface:

Code:
if ((sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)) == -1)
{
perror("socket");
exit(EXIT_FAILURE);
}
setsockopt(sockfd, IPPROTO_IP, IP_HDRINCL, &optval, sizeof(int));

Instead, it uses "setsockopt" to set some options.

My guess is that it is trying to send packets over the eth0 interface instead over the wl0 (wireless) interface (which is the one I want to use to send pings).

Now, my question is: Is there any other way to send pings in C by binding to an interface?

View 1 Replies View Related

Programming :: C/C++ - Program Detecting New Sockets

Jul 25, 2010

I need to create a C/C++ program in Linux that succeeds in detecting how many tcp-sockets and what tcp-sockets are created by the other processes in the system in a particular time interval (e.g., the interval time this application is running in). Then, I'd need to get some information like local/remote port number and local/remote ip address of each of these sockets.

View 8 Replies View Related

Programming :: How To Use Sockets To Display GUI At Server End

Aug 27, 2010

I am struggling a little on how to best approach this problem. I have wrote a server program that runs via xinetd, that obviously spits out data at the client end. Fairly straightforward stuff?There is a point in my server code where I need to display an image/gui i.e something that runs on X11 that prompts a user to perform a task on the display connected at the the server side.So far I have written a test program that displays some text at the client end and then launches the browser at the server end. I have also set the following export. Code: export DISPLAY=:0 and then goes on to launch my web browser. Works great when ran locally on the server and when I remotely telnet in to the server and run the code.

However when I try to run the same piece of code as a xinetd service the export seems to have zero affect and the client terminal window displays errors associated with there not being a X11 server running.The code launches fine when I create a socket to serverip:6556 it just the ability to display gui programs to another display that does not seem to be working.

View 5 Replies View Related

Programming :: Parallel Data Transfer Using Sockets

Feb 25, 2011

I am doing a project where 2 clients connect to server and communicate (chat) and transfer data one after other using sockets. I have working code for this in C language. Now our main aim is to create a communication link where two clients transfer multiple streams data parallely. To be more precise i want to transfer images files and audio files parallel at same time, so is it possible to send data parallel using one socket connection?

View 3 Replies View Related

Programming :: Creating 2 Sockets In Client / Server?

Jun 9, 2010

I have a problem creating my second socket in client file. the program was running well but when I try to add another socket to connect to the same server, I got a problem connecting to the first socket! it doesn't make sense. the original code was:

sockfd[i] = socket(AF_INET, SOCK_STREAM, 0);
if(sockfd[i] < 0) error("(MAIN) - Error openning socket 1");
port_num[i] = portno;
bzero((char*) &serv_addr[i], sizeof(serv_addr[i]));

[Code].....

View 1 Replies View Related

Programming :: Read DNS Informaton Using Sockets And C Libraries

Jun 9, 2010

I am using the API libpcap in order to filter the traffic of the port 53 from my PC ro other PCs, in other words the DNS traffic.I want to get more information about the DNS traffic that is being sent to the DNS server, in other words the queries. So far I have no idea how to read the information data or payload of the UDP package in order to read the content of the traffic for example if there is any PTR, A, MX, etc Resource Record.According to the RFC 1053 there is a header that is possible to use in order to easily get this info.

View 5 Replies View Related

Programming :: Automated Monitoring Of Different Sockets For Available Data

Feb 4, 2011

NextPendingConnection () returns a new socket with respect to a new client. This new QSocket is passed to the connect () function which connects it to a SLOT 'xyz' with SIGNAL 'readyRead()'. Now in the SLOT 'xyz' how I am supposed to automate the monitoring of ALL connected sockets to see whether some data is available on them? One pathetic way would be to run all the sockets through a for loop and check each one of them for the data. Secondly, I read up on QSocketNotifier() here: [URL]. But I am not sure if that is the correct thing.

View 3 Replies View Related

Programming :: Sending Binary Data Through Sockets In C

Nov 29, 2010

I am coding a http server which has to send the file(s) such as images, .avi files, .mpeg, that the client is going to request. I have been trying of sending files through sockets.

char info [256];
bzero(info, 256);
//memset(&info,0,sizeof(info));
read(socket, info, 255);
write(socket, HTTP, 255);
FILE *fl= fopen(info,"rb");
fseek(fl, 0, SEEK_END);
long len = ftell(fl);
printf("largo: %ld", len);
unsigned char *ret = (char*) malloc(len);
fseek(fl, 0, SEEK_SET);
fread(ret, 1, len, fl);

However, it's supposed to be shown in Mozilla Firefox (as the client). But it is not doing it, so.. It's just not getting the complete file.

View 1 Replies View Related

Programming :: Possible To Pass File D Escriptor Without Sockets / Streams?

Apr 20, 2010

I have a problem passing a file descriptor from one process to another.

I have two processes A and B. Both are running in different network and
filesystem namespaces, so it is impossible to use unix domain sockets or
net sockets to pass a file descriptor from process A to process B.

The usage of STREAMS is also impossible, as you can see in
fixunix.com/unix/84093-streams-pipes-ioctl-i_sendfd.html

[quotation begin]
Linux doesn't have STREAMS, which are the System V way
of doing this task. ...
[quotation end]

Are there additional possibilities for file descriptor passing like
using named pipes or something like that or does anybody know
a good workaround for this problem ?

View 9 Replies View Related

Programming :: Closing Multiple Client Sockets In Server ?

Nov 30, 2010

I have written a server application which has select for both incoming new client connection requests and incoming data from client. I am able to process incoming connection requests and client data.

For example, server has 8 clients connected to it. If client 3 disconnects from server, how will server come to know this client has disconnected and to close its client socket fd gracefully? Does server's select get data on that client socket fd as 'close' data or any error code in recv() function that notifies server to close this client socket fd? Also if client disconnects abruptly without sending close request to server, how should server handle this? Does server get "EPIPE" error?

View 1 Replies View Related

Programming :: Sockets - P2 - P3 Http Connection Taking More Time Than The Expected?

Mar 31, 2011

Iam using socket programming in one of my problem. The scenario is like this.

=>one module is working as a socket server(process p1) is able to handle client sockets on that port.
=>one module is working as socket client (process p2) is connected to server socket and Tx/Rx data on this socket. This module has some more threads, based on received data from server socket it will connect to http on other thread and get information...
=>one more module is working as socket client (process p3) is also connected to server socket and doing some other transactions.

Here my problem is when in presence of p2, p3 http connection taking more time than the expected. If we wont start p3(means only one server-client socket) then http connection is fast enough.

View 1 Replies View Related

Programming :: While Receiving Can Use Functions Like Strchr() To Differentiate These Fields For Sockets?

Apr 15, 2009

constructing a protocol where in it involves sending and receiving different files, so sending data over consists of file name, size of the file and content of the file, so while receiving can i use functions like strchr() to differentiate these fields for sockets? so to allocate memory for file to save i need to have its size.

View 3 Replies View Related

Programming :: Build Ip Packet With C,socket Programming?

Jan 30, 2011

How can we build a packet using C?we have a structure called sockaddr_in which is use to for IPv4,so that we can define address,port and etc in this way:

Code:
struct sockaddr_in sock;
sock.sin_family=AF_INET;

[code]...

View 5 Replies View Related

Programming :: Add Local Sockets In Multi-threaded Application In Order To Exchange Data Between Threads?

Jul 24, 2010

I'm trying to add local sockets in my multi-threaded application in order to exchange data between threads. The only problem I got is that most of the information available on the net is related to internet oriented socket programming whileI want to perform local connections. got a thread that does the sniffing via libpcap. And I would like that thread to send each captured packet to a second thread that will analyse the packetof the thread implementations is written in separate .h file.Or maybe there is a more effective method of exchanging data between threads

View 14 Replies View Related

Programming :: Create Own Packet In NS2?

Apr 14, 2011

I want to create my own packet for aodv so how can i do? from where i should start?

View 2 Replies View Related

Programming :: How To Tunnel Packet

Apr 19, 2011

I want to develop program to put (tunnel) sniffed packets into another packet, i already have sniffer code to capture packet, can some one give me use full site or simple code to do that.

View 3 Replies View Related

CentOS 5 Server :: Authenticate/Decrypt Packet Error: Packet HMAC Authentication Failed

Sep 17, 2009

I got a problem with my CentOS server. Somebody told me OpenVPN Requires different changes inside my firewall settings. That could be the problem why openvpn wont load..I receive this error on my CentOS panel when im trying to connect into the centos openvpn (with my winxp pc):

Thu Sep 17 20:31:36 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
Thu Sep 17 20:31:38 2009 Authenticate/Decrypt packet error: packet HMAC authentication failed
Thu Sep 17 20:31:38 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622

[code]....

View 5 Replies View Related

Programming :: How To Access Packet Timestamp

Jan 8, 2011

I want to access the timestamp field of the packet being sent or received. I am not getting clear idea as to which ioctl I should use, and how it should be used in the program. Anyone explain rough flow of the program for accessing the timestamp.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved