I am just starting my adventure into Ubuntu. After installing and configuring Shrew Soft in Ubuntu 10.04 64Bit, I am having some serious packet loss issues. The LAN is wireless, however the only packet loss I experience is over the tunnels. I have tried different algorithms, and it seems as I fiddle with the MTU client side, it clears a bit, but the best I have managed is 23% loss average.
View 2 RepliesI am simulating a TCP/FTP to TCP/FTP network and trying to monitor the packet loss.
I am able to monitor and graph data regarding the TCPSinks' bytes received, but I can't monitor packet loss.
Why is it that the TCPSink Agent has a variable for bytes (bytes_) but not one for monitoring packet loss?
Do I have to monitor the packet loss from the queue? If so, how do I write code for this?
Below is part of the code for monitoring bytes received from sinks if anyone was interested.
I got a new X201 which is running Ubuntu 10.04. While at home, everything is fine, at work, I encounter some issues with wireless. the signal cuts in and out repeatedly.Here's the output of ping. I set it to ping a server every 90 seconds, 10 times. So this is a snapshot of 15 minutes of network activity...
Code:
PING (REDACTED) bytes of data.
64 bytes from (REDACTED): icmp_seq=1 ttl=252 time=1.50 ms
64 bytes from (REDACTED): icmp_seq=2 ttl=252 time=2.13 ms
64 bytes from (REDACTED): icmp_seq=3 ttl=252 time=1.38 ms
[code]....
Also I tried this (from a 2 year old thread which was most relevant solution I could find):
Code:
Changing AVAHI_DAEMON_DETECT_LOCAL=1 to AVAHI_DAEMON_DETECT_LOCAL=0 in /etc/default/avahi-daemon has got rid of the irritating pop-up. Basically, every 5 minutes or so, for a solid 60 seconds or so I get no signal. I've tried updating the kernel, and doing apt-get remove avant-daemon, but still have problems.
I try to setup a locale network between 10 (Web) Servers (openSuse 11.2), each Server is connected to the internet (eth0) which works fine on all servers.
A 2nd NIC eth1 (1GBit rtl-8169) on each Server is connect to a Switch and should function as a LAN. I installed/configured the 2nd NIC with yast, and than added a route for the local network (192.168.20.0) to use eth1. So far every thing works (ssh for example), but I have a packet loss of 10%-60% (ping) on the local network, and I cant find the reason for the packet loss. I already installed a Debian Lenny on 2 Servers (just to test) but I have the same problem on Debian.
No firewall or any other application is in the way. With tcpdump I could figure out that the packages are send but never show up on the destination server.
I put some more information about how I configured the LAN below. I have not done this my first time and from my experience if something is wrong with the network configuration (wrong routing, firewall in the way, etc.) this usually leads to a packet loss of 100% or the destination is simply not reachable.
The 2nd NIC is installed with either yast on suse , or by editing /etc/network/interfaces on debian. The Kernel module rtl8169 is loaded.
They are configured with the following values:
Route is added by:
Output example. of ifconfig :
Output of route (same on all servers):
Output of ping:
I'm using kubuntu 9.10 desktop edition as a server and I set the IP statically, what happens is that when I ping it from another machine on the same network, I get intermittent packet loss (up to 80% and sometimes even higher). When I ping any other machine on the local network everything's fine with 0% packet loss. Packets go directly through switch, no router or anything in between.
I suspected wiring issues, but that doesn't seem to be the problem after I changed the wiring. I was connected to wireless and suspected that but no go either. Same thing when I turn wired. I just changed the ethernet card suspecting drivers but that's no good either. Iptables is a cleanslate installation, it's totally empty.
Just want to know if my connection will be good for voip like skype...
View 1 Replies View RelatedI have ubuntu lucid running on Dell 230 PC, linksys WPN600 N wireless PCI network card connecting to a Cisco E3000 dual channel router.
Kernel: 2.6.32-33-generic
Installed Ralink driver v2.4.0.0
iwconfig shows that the bit rate is 130Mb/s and link quality is 98/100. I'm using the wcid network manager instead of defaul gnome one. I'm getting lots of packet loss and performance is very bad. The connection is practically unusable. I've tried installing the compat wireless backport package but that did not work at all.
I have 3 Dell Precision M4400 machines. After getting updates yesterday or today, I get random network dropouts like crazy, on wired or wireless. On one machine I was able to turn off ipv6 in grub and reboot, and it works now. However on the other 2 machines, still have the same problems. All 3 are running 9.10 64 bit. Is there a way I can back out the updates so the network works again? Anyone else see this behavior after updates today?
View 2 Replies View RelatedI have a following configuration: 4 PCs (say, A, B, C and D), running Ubuntu or Debian, interconnected using a gigabit switch, which is connected to the Internet. Two machines (say, A and B) also have a direct private connection between them (provided by another pair of NICs).
Now, when I test the connection performance with iperf, the results vary. The private connection between A and B performs well - about 930Mbps using iperf's UDP test. Between C and D it is about 800Mbps which I find tolerable. Packet loss when running these tests is negligible.
However, when I run iperf between any of {A,B} and {C,D}, the performance significantly drops as there is a huge number of lost packets.
For example, here is the result of testing between A and C:
Why is there such a large number of packets which are generated, but lost somewhere?
A<->B private link works fine, so system level parameters on both A and B are correct. Furthermore, C<->D works ok, so I guess I shouldn't blame the switch.
Is there a per-NIC configuration that I should check or it smells like a hw problem? Problematic NICs on both A and B are of the same type - Allied Telesyn AT2916T.
I am running Slackware 13.0 on a old dell dimension 4500. The install went fine. sound worked, graphics where good. Everything was going perfect. until i worked on wireless.i have a realtek rtl8185 wireless chipset card. I got the wireless. Linux wireless driver. It worked on both Mint 5.0 and backtrack 4.0.so I untar the file. cd to the dir and type make then make install and reboot. like I have always done.
I was having to fight with wpa_gui and finally got it working but then it would go in and out on the connect and disconnect feature. so I tried using iwconfig. did not get muc luck with that either so i installed wicd and finally got a ip address after fighting with it would give me in a ping like 75% packet loss. so I read a lot of post and try to find stuff before I post. and while reading I learned that you guys normally ask for info on the hardware and software so here you go. but I will say first that I read about adjusting the mtu to fix packet loss, I showed some of the changes I made in it around the pings I know it is a mess I am sorry I tried to make it readable. if you need more information let me know. I cant get online using a web browser or if I can only for one or two pages. any help would be great. thank you.
Code:
bash-3.1# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code]...
I have problems with my network speed when i ping my proxy server I end up getting a high packet loss generally more than 30%.I have tried to use various network monitoring softwares like etherape, wireshark, tcpdump but I am not able to get to the bottom of the problem.basically I am trying to find out where the lost packets are going.
View 7 Replies View RelatedI am running Linux Mint Isadora 9 and recently installed a wireless USB adapter. After installing RT3070 drivers for my RT2070 card I got everything working and life was good. Now, all of the sudden I am having a world of problems connecting to the internet. I can connect to my AP fine, but I cannot access the internet. If I attempt to ping my AP by IP address I get severe packet loss. I cannot ping my AP by url [URL] at all so Im guessing there are some DNS issues as well.
Code:
poe jk # lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c045 Logitech, Inc. Optical Mouse
Bus 003 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
[code].....
I have linux workstation. All users home directories are NFS mounts.
Since I am facing packet loss issue users are unable to login to the workstation.
I found the packet loss using mtr from workstation to filer.
Matt's traceroute [v0.54]
Hostname
What are the things I have to check to resolve this packet loss.
Following is the ethtool out put of the workstation
Settings for eth0:
I am recently trying to get a steady wireless connection running. I am currently using the default settings/driver Fedora 13 is stocked with. As my internet browsing is somewhat up and down in load times, I decided to check in a video game which is generally a good test for me. haha I am harshly spiking and cannot find the source of my problem so my guess is a driver issue.
lspci | grep Network:
Code:
Code:
It is is seemingly right, my Windows 7 harddrive works just fine, this is just one last of the few issues I'm having from fully formatting my winblows HD to use as Linux storage.
I cannot find any native AR5008 Linux Drivers for my card and it has been a frustrating day. I guess I'm not cut to be a network analyst just yet.
System specs:
ASUS P5Q SE/R
Intel Core 2 Quad Q9550
4GB DDR2 667
Gigabyte GTX465 1G
TP LINK TL-WN851N Wireless card
[Code]...
I adjusted my routes to use my ppp1 (VPN) connection for almost all browsing. Have I misconfigured something.? Some more background information: My VPN is about halfway around the world from where I am / my PPPoE connection. I've already changed my DNS servers in /etc/resolv.conf to Google's 8.8.8.8.I get around 2 kBps on Ubuntu and 50 kBps on Windows using the same VPN. =/
I'm beginning to write a custom RTP implementation and want to test its resilience to UDP traffic. I've searched on the web and all the links I can find are for analysing actual traffic, not generating it or messing it up.
Does anyone know of any software (preferably free software) that will, for example, take actual UDP traffic and drop packets, duplicate some and make some arrive late/out of sequence?
I am running Redhat linux 8.0 with 2.4.22 kernel. I am using this server for traffic shaping my static ip clients using tc. There are about 250 clients and I am running mrtg to monitor traffic via cronjobs each 5 minutes. When mrtg run I see too much packets loss in my network. What could be the problem in my server?
RAM is 1gb and processor is Intel Pentium D 2.66GHz.
i made a video and i wanted to put it on my myspace(video upload) and it justs fade to grey and becomes unresponive. that it goes back to normal but no progress. so then i tried going to image shack and uploading a picture. can't do that either. tried mediafire, videos, vimeo, nothing.
so i tried on my desktop(desktop running 9.10 32 bit. laptop(the first one i tried) running 9.10 64 bit. it didn't work on that either. i know it's not my isp because it works on my ps3(no ubuntu). not my firewall and tried without without my router. didn't work either. i tried upgrading flash on both of them and on my desktop i can upload some pictures to imageshack now. nothing else though. i have tried using both firefox and opera.
i pinged yahoo and this is what i got:
6 packets transmitted, 6 received, 0% packet loss, time 5007ms
rtt min/avg/max/mdev = 72.732/73.437/75.024/0.761 ms
I',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
I am the new user to ns-2. I would like to know is it possible to send the keys or some value as the packet data (content of the packet) in ns-2 (for wireless environment).
View 1 Replies View RelatedI got a problem with my CentOS server. Somebody told me OpenVPN Requires different changes inside my firewall settings. That could be the problem why openvpn wont load..I receive this error on my CentOS panel when im trying to connect into the centos openvpn (with my winxp pc):
Thu Sep 17 20:31:36 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
Thu Sep 17 20:31:38 2009 Authenticate/Decrypt packet error: packet HMAC authentication failed
Thu Sep 17 20:31:38 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
[code]....
I have a new Toshiba Satellite L450, and decided to run Ubuntu, which is new to me. I am running a 64 bit Karmic, and there is no driver that works. So, to make a long story short: a friend helped me get a driver on my Desktop, namely: rtl8192se_linux_2.6.0100.1012.2009_64bit.tar.gz We had it working, but when I let in the first large batch up updates, it kicked the driver out. I found instructions, installed it again. I let in the next updates, and it kicked out again, and this time the instructions don't work. So, I have two sets of questions:
1. Will updates always undo my wireless? Are there certain updates I should avoid if I want the wireless to stay up and running? (I just assumed the thing to do is just get the updates -- though I am guilty of having no idea what they were about.)
2. Did the updates cause one of my instrucitons to no longer work, or need to be modified?
They were as follows:
sudo apt-get install build-essential
cd ~/Desktop
sudo tar -xvzf rtl8192se_linux_2.6.0100.1012.2009_64bit.tar.gz
That 'sudo tar -xvzf...' operation is the one that stops me. Is there something to change in that line? It goes on:
cd rtl8192se_linux_2.6.0100.1012.2009_64bit
[Code]...
this worked the first time I tried it. I posted this earlier under 'hardware', and do not know how to get that post off, so I typed it here once I realized.
I have a Compaq Presario M2000 with a Broadcom BCM4306 wifi card with Ubuntu 11.04
I did the following commands and the wifi works perfect, but after reboot I have to run the commands again?
Code:
~$ sudo apt-get install b43-fwcutter
Code:
~$ sudo apt-get install b43-fwcutter firmware-b43-installer
[Code].....
I am trying to install shrew software in OpenSuse 11.3. So , i do cmake ... and finished correctly , but when i do make i got the following error: uic: File generated with too old version of Qt Designer (3.3) I checked the repositories and i got the lowest version of qt available : qt3
View 9 Replies View RelatedI have a hp dv3 laptop which dual boots Win7 and Ubuntu 9.1 64 bit. I have no issues with my wireless adapter in Win7, but I lose connection after a couple of hours in Ubuntu. When connection is lost it is not possible to view any wireless signals, the adapter is basically turned off. The only way to restore the connection is to reboot, then Ubuntu will again automatically connect to my WP2 encrypted router. My wireless adapter is a AR928X made by Atheros.
View 4 Replies View RelatedFor most of today I had my internet connection dropping out on me intermittently. I assumed it was a provider issue, as it has been unreliable in the past. After it dropped out for good, and I could not print through network, I realised it was not a provider issue. All the other computers in the house were connected, including another ubuntu box. Only the MacBook Pro 5,5 was not able to connect. The network manager indicated I was connected to the network, throughout the whole time.
A number of restarts with the kernel I normally use (2.6.31-19) including one in recovery mode, yielded no change, but a restart with the 2.6.31-20 kernel resulted in connectivity. Finally, perhaps by chance, wireless started to work again on the 2.6.31-19 kernel, after I once booted into the Mac OS, and then back into Karmic. How I might go about diagnosing, obviously in hindsight, what happened? I suppose I should look in the log files, but I have no idea where exactly, and what to look for.
PC running Ubuntu 10.04LTS, with a Virgin media modem NTL250 with a Buffalo Airstation Turbo G wireless router running Tomato Firmware v1.27.1798.The router is is used by a Internet radio, a wii (both full time) and a nokia N86 mobile and a PSP (used occasionally). The PC is connected by a network cable to the router.Now, when the modem is plugged directly into PC i get 6 to 8 Mbs download speed. When I go modem to router to pc the speed drops down to 512 to 824Kbps. Speeds were obtained off of broadband.co.uk speed tester.
View 1 Replies View RelatedWe (3) have download limit problems with a 50G/month limit (Inc uploads). The router I cannot change, and it offers no useful options. So I am considering using IP forwarding from my own box. I think I would need a second nic, & router. Eth0 would run a dchp server, eth1 would run a client. What do I run on the box to monitor downloads & uploads, and is there a way of adding pc & laptop downloads to limit luser downloads? Does this stuff strangle speed? I'm running slackware-13.1
View 3 Replies View RelatedThe problem is I have a wireless Belkin router which I can connect to, but after being connected for a few minutes the net disappears (cuts from the router) and my laptop will have to reconnect again to the router for internet to work again. After a few minutes (or seconds in some cases) the connectivity loss will happen again over an over.
How to fix this problem or some things I can try, I've tried updating to two different firmwares, two different channels and resetting the router. The biggest problem I find is that this happens on both my laptop, another laptop in the house and also my tablet PC but doesn't happen on two other laptops in the house, I've also tested with windows 7 and Ubuntu with my laptop.
My laptop wireless card is Atheros AR9285 802.11b/g/n WiFi Adapter
I am in a hub(with switches and rooters) and i want to spy what packets everyone receives! if can i do this and if i can which tools i can use?
View 6 Replies View Related