I installed Ubuntu and I cant get my wireless connection to work. I found that I need ndiswrapper to update my drivers following the sticky post in here. However there is a problem, because I cant successfully run ndiswrapper on my system.
View 9 RepliesI am on a Dell Vostro 1520, running Ubuntu 10.04 and I am having problems connecting to the internet via wireless. Wired connection works but wireless doesn't. My laptop is running a Broadcom BCM4312 wireless card. And it says "wireless is disabled", how do I enable it? What do I have to do to get this working?
View 9 Replies View RelatedI recently purchased an Acer Aspire 1410 notebook running Windows 7 home edition. I installed Ubuntu 2.3 and my wireless and network LAN connection is not working. I saw on a link in this forum, someone was having similar problem. However, when i tried the solution that was recommended/suggested to the person, it did not work for me.
what I can do to get my wireless and wired connection to work?
I just installed Ubuntu on my windows pc with no problems....except for wireless that is. I have a USB Linksys WUSB54G adapter to access my 2WIRE, WEP network. The thing is, it shows up in the top right hand corner. It even gives me the signal strength. But when it comes to using Mozilla, it is never able to access a page. If I try to Ping something, it's unable to. So I thought maybe I need to use ndiswrapper with my .inf and .sys files from the driver for my windows. I installed it, and added the driver to it...everything went O.K. I check it and it says it's installed and working. Again, I can see the wireless networks, and "connect" but when I try to use the connection there is nothing. I have also tried my neighbours non-WEP connection, but it still doesn't work. So I'm sort of at a loss with what I should do now. I see the networks, can "connect" but can't browse. I installed the drivers from my windows, and it still doesn't work. I used a LIVE CD of Knoppix and I can connect to the Network within 30 seconds and start browsing the net.
View 2 Replies View RelatedI am not able to connect to a wireless network with the HP mini 110 series. When going to the wireless network menu, no networks shows up. if the solution could be described in a very easy "how-to" or just be made into a patch (if there is pathes on ubuntu) it would be nice.
System specifications from HP:
<li style="font-weight: normal; margin-top: 10px;"> Intel(R) Atom(TM) N455 (1.66GHz) + Intel(R) Graphics Media Accelerator 3150 [For Mobile Broadband] <li style="font-weight: normal; margin-top:
[Code]....
I recently installed a HP photosmart everything works fine but I can't get the wireless connection to work.
View 1 Replies View RelatedAs of now, my internet works fine when connected with an ethernet cable.The problem is it doesnt seem like my wireless is working at all.The led light is orange, (its usually blue when it connects) and I cannot see my home dsl network.Is thereany specific troubleshooting steps I should take?HP dv6000 laptopwireless card: Broadcom Corporation BCM4311 802.11b/g WLAN
View 6 Replies View RelatedI have ubuntu 9.10 and my wireless connection has been working perfectly until a few weeks ago when I updated my laptop. I can connect to the internet using my wired cable but not by wireless. There is nothing listed under my wireless list. I am new to this and have been unsuccessful in getting my wireless connection going again. I don't even know were to begin. I have a 2wire modem also.
View 2 Replies View RelatedI am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
Some info below:
- notebook Fuijtsu Siemens AMILO Pro2065 - 4 gb ram - 80 gb hd - wireless on board Intel PRO/Wireless 2200BG
- wireless works properly with Ubuntu (with WEP key)
I'm just installed OpenSuse 11.2 and:
- wireless found my AP
- i've just inserted WEP key / 64 bit Hex-Ascii and..not working!
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
I have just installed Ubuntu 10.04 on an Acer Extensia lap top. Thinking about re-installing for two reasons:
1. I can't get the wireless connection to work. It did on the earlier version -- 9.
2. it kept all my previous installs even though I only asked them to save one other OS that I need. The second problem I could live with, though I wouldn't mind having the space that is used on these systems I don't want.
So, should I go back to an earlier version of Ubuntu? If I do re-install can I use the "specify partitions manually" option and get rid of the extra OSs? I'm not exactly a beginner, but neither am I an "expert." Don't want to get into highly technical fixes.
PS I think it may be a compatibility issue with Acer, as I use 10.04 on a dell and don't have the wireless problem. Do I need a driver?
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedIt's my very first time to use Ubuntu. I have just installed it but I can't figure out how to make my wireless internet connection work..
View 2 Replies View RelatedI've just upgraded to Ubuntu 11.04. Everything worked fine, until I rebooted. Now I can not connect to my home wireless internet, so I can't re-enable third party software sources. I am currently using a different computer, so I know that our internet works. I checked the wireless switch on my laptop, and it says that wireless is enabled. I've rebooted, and it still doesn't work. I tried our wired internet, and that didn't work either (although I'm not sure if our wired internet works; we haven't used it in a few years)
View 3 Replies View RelatedI have just setup Ubuntu on my Dell Laptop a Lattitude C640 with a 3Com 3c905C Tornado Wifi Card. Well the wired and wireless do not work. They try to connect then bang no connection. I would be able to make some headway I think but I have no basic skills with Ubuntu. I have mastered how to get info from the terminal but how the heck to you edit a file? How do you get to that stage?
View 4 Replies View RelatedI am fairly new to linux and I just bought a new computer. I have a dell inspiron N4010 and I installed Ubuntu 10.04 on it. I then was unable to connect with a wired connection or wireless. I am sure this is a driver issue I just don't know how to get the proper drivers. If I put my mouse over the wireless icon it says networking disabled. But the switch to enable networking is on the keyboard
View 5 Replies View RelatedAfter deciding to get into Linux and start learning the secrets of it, I decided to install it on my laptop. Now I have a small problem. How can I get my wireless connection to work on it? I have read few guides and tips on the internet regarding the iwconfig and the rc.wireless_conf files, but it didn't get me anywhere. I have Slackware 13.37
View 6 Replies View RelatedI'm considering installing Debian on my Toshiba A660 laptop but I want to be sure the wireless connection will work. I have Windows 7 on it already on it and it has a Broadcom 802.11n Network Adapter. Is there an easy way to set up a wireless connection and will it work on a live CD to test it?
View 3 Replies View Relatedhow to get my wireless connection to work on the network. I don't see anywhere to go to see if the wireless adapter is even setup in Fedora. My other question is when I boot up and get the options to select the OS the first one is Fedora but the other one says it is other.
I think that is is booting up the recovery partion of Windows. I don't know how to change it so that it is looking at the correct portition. I know it has something to do with the menu.lst file but when I try to open it says that I do not have premission. I am not sure where to go to edit it.
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
Will the Netgear WPN111 wireless adapter work with Ubuntu 10.10? If so what action is required to get connected with it running Ubuntu 10.10. The adapter works with Windows XP.
View 2 Replies View RelatedI have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedI want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies View Relatedi installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
View 3 Replies View RelatedI have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...