Ubuntu Networking :: Wireless Lan Doesn't Resume?
Jan 19, 2010
I'm setting up an HTPC (Zotac IONITX-F in a Silverstone ML02-MXR case with remote) running XBMC on top of a minimal karmic install. So far I've managed to get everything running including the tricky stuff: wireless, lcdpro and lirc. I did have the same samba/dhcp conflict described in this thread, so I opted for a static IP solution instead of the usual dhcp connection with the router (D-link DIR-615) reserving an IP for the MAC-address. This is my /etc/network/interfaces file:
Code:
auto lo
iface lo inet loopback
# The primary network interface
#auto eth0
#iface eth0 inet dhcp
[Code]...
View 5 Replies
ADVERTISEMENT
May 7, 2010
I've read many threads here on wireless problems in 10.04. I've got it updated as of this morning.
Symptom: wireless works perfectly - doesn't drop out and starts right up at boot. But if computer (Dell Latitude D505) goes to sleep, wireless won't resume. Network Manager shows wireless networking greyed out after waking.
Here's output that should be helpful:
xxx@xxx-laptop:~$ sudo lshw -C network
[sudo] password for xxx:
*-network:0
description: Network controller
product: BCM4309 802.11a/b/g
[Code]....
I've read in several other threads here that blacklisting the wireless driver file(s) may resolve the problem.
- What driver file(s) on the computer do I blacklist?
View 9 Replies
View Related
Nov 2, 2010
I recently installed 10.10 Maverick on a lenovo S12, and I've been having problems with the wireless connection. First I installed the Broadcom B43 driver. This driver seems to work well except upon resume, I'm no longer connected, and wireless is disabled, and the 'enable wireless' is grayed out and I can't seem to find a way to enable it besides a restart.
I tried what is suggested in this post: [url]
Namely:
Code:
Put:
Code:
This doesn't seem to have any effect
I also tried the Broadcom STA driver. This was only better in that after resuming it tried to reconnect, but never managed to.
View 3 Replies
View Related
May 6, 2011
I've been happily using this lappie with LTS but wanted to try out 11.04. It looks great but wireless has been an issue:
1. No wireless during install
2. Had to manually blacklist the rt2860pci etc modules
3. Wireless still not resuming after suspend
05:00.0 Network controller: Ralink corp. RT2860
Subsystem: Ralink corp. Device 2790
Physical Slot: 0-2
Flags: bus master, fast devsel, latency 0, IRQ 18
[code]...
The latter manual mod improved things slightly but still no cigar
View 7 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
May 19, 2011
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
View 2 Replies
View Related
Apr 27, 2011
I use KnetworkManager for wireless. Works great except that if laptopgoes into suspend the wireless does not work after resume anymore.NetworkManager log
Apr 27 20:24:42 linux-nfii NetworkManager[1433]: <info> (wlan0): device state change: 7 -> 8 (reason 0)
Apr 27 20:24:42 linux-nfii NetworkManager[1433]: <info> Policy set 'Morran' (wlan0) as
[code]....
View 9 Replies
View Related
May 11, 2010
I've been using Tucan for Rapidshare downloads, but one thing that bothers me about it is that, as far as I can tell, Tucan doesn't have resume capability. I have a wireless connection which occasionally falters, and I have to restart all downloads from 0%. Is there a download manager for Ubuntu that will recognize my premium Rapidshare account and that also has resume capabilities?
View 2 Replies
View Related
Jun 19, 2015
I'm running Debian 8.1 KDE on a 2007 dv6 laptop. Model number is worn off. lol but the specs:
Intel i3 first gen m 330
4GB RAM
Intel (ironlake) graphics
First off, closing the lid to my laptop doesn't trigger suspend, or anything no matter what I set it to in power options.
I can suspend using "systemctl" or suspend from the "Leave" menu, but upon turning my computer back on, my touchpad and keyboard don't work.
Sometimes, my touchpad will start working after about 15 seconds, but the keyboard doesn't come back. I have to hard reset.
I have a feeling it's something to do with systemd, but I'm not super proficient in linux. Just an end user who is friendly with a terminal.
View 6 Replies
View Related
Jul 31, 2010
I've been using (solely) Linux for a few years on this laptop without problem night my internet disconnected on Sabayon and I assumed it was the router. -Then I noticed my MacBook and desktops were working fine. The wireless icon in the notification area said "Wireless is disabled".-Then I tried out a live Lucid CD I had around. Detected wireless instantly. I backed up everything and did a clean install of Lucid. A few days later, wireless would not come on.-Now I am on Mint 9. Wireless is always disabled by default, and in order to turn it on I have to move the slider to the Off position and then turn it back on. Lately, wireless isn't coming on sometimes and cannot be enabled. Same error; "wireless is disabled" in the GNOME panel. A reboot is the only way I co
View 3 Replies
View Related
Nov 15, 2010
I'm running Ubuntu 10.04 on my laptop. Up until about a week ago, my wireless worked fine, but now it rarely connects. Sometimes the connection indicator shows that I am connected, but when I click on it it doesn't show any active networks. Even when I use a wired connection it doesn't always work.
View 3 Replies
View Related
Aug 11, 2011
I've just a had laptop meltdown which resulted in the acquisition of a replacement (HP635) sporting a realtek wireless NIC. Found the drivers and installed them and all is well. HOWEVER, the card is not activated on wake from sleep mode. This is kind of astounding to me. Every crappy windows version that I've used can handle this situation. Many searches, however have failed to yield any help. After every resume from sleep mode I have to run ifup to start wlan0. Surely this is not the only way it can be? I have to assume that I'm not getting something simple, and someone here can point out my failing. or if you can just sympathize. running 11.4 here using the realtek 8192 driver set to start at boot time. Though none of the other settings have had any effect on this problem.
View 5 Replies
View Related
Jan 31, 2010
I recently got a cable modem from Comcast, and connected a Belkin F5D7230-4 wireless router to it, then connected my computer and an Xbox 360 to the router with ethernet cables.
My computer dual-boots Ubuntu 9.10 and Windows 7. In either operating system, the wireless connection is flawless. In Windows, so is the wired connection. But in Ubuntu, there's a lot of trouble with the wired connection -- specifically, while I can connect to the router and to the Internet, and while I can use ping, dig, traceroute, etc., to verify connections to remote hosts, Web browsing, or anything else that uses http, works only for a few Websites, and then only erratically.
I don't believe it is a DNS problem -- testing with ping, dig, etc., demonstrates that, and I have also tried using alternate nameservers. I also don't believe that it is an issue with IPv6, as I've tried the fixes usually suggested, including editing the grub configuration to disable IPv6 support in the kernel and verifying that IPv6 was inactive. I've also tried using local dns servers such as pdns-recursor. None of these things seemed to help.
Also, perhaps unrelated, but disturbing: my computer has locked up a few times while testing the wired connection, and I had to use a hard reset to restart the computer.
View 1 Replies
View Related
Feb 14, 2010
I am exploring Ubuntu 8.10 on my Asus netbook without yet installing it. While using Ubuntu I cannot get it to recognize any wireless networks.Is this because I am only exploring Ubuntu and it has not yet been installed? The networks are recognized when using the XP operating system.Will Ubuntu recognize the wireless networks once it is installed as the operating system?
View 9 Replies
View Related
May 8, 2010
I had the same problem with normal ubuntu, wubi or even after instaling it in a virtual pc
I've got a wireless router with a WEP security, when I choose my connection and put in the key it just tries for some time and then ask me again for the WEP key. And it goes like this on and on and on, I've tried to connect at some firends gome with the same kind of connection and it doesn't work either.
I think that in an older version I did connect to an unprotected connection but I cannot take out the protection because it is my roomsmate wifi.
View 2 Replies
View Related
May 20, 2010
I'm working on Lucid, in HP Pavilion 9730us laptop.
My wireless broadcom card was working just fine until now as i installed it with the Hardware Devices manager, Today i put a new ALFA AWUS036H usb card to work with aircrack. both cards were working together for a while, but as i started playing around with aircrack the broadcom card of the HP has stopped working.
I made a mistake and followed the aircrack tutorial for R8187 / ieee80211 stacks driver, while i'm using RTL 8187 / mac80211 stack drivers, and blacklisted the RTL8187 , rebooted and then both card didn't work. I un-blacklisted it, and the ALFA is working but the broadcom not!
iwconfig shows me only one wireless card on wlan0 the blue light showing activity in the HP card doesn't go on.
Tried to uninstall and reinstall broadcom drivers, still no change.
View 2 Replies
View Related
Aug 11, 2010
I use kmail in kubuntu 8.04. Whenever I have a wired connection, kmail checks email and sends messages just fine. However, any time I switch to wireless, kmail just says "No new messages," without even checking. I am also unable to send email over wireless.
View 5 Replies
View Related
Dec 12, 2010
I got Ubuntu 10.10 installed. Unfortunately, my wireless doesnt work. I'm connected to my router, but web pages wont load.
I thought to myself, maybe Ubuntu needs to update. So I lugged my computer out to the router itself and okugged my computer in. I went into update manager and let it do its thing. It was PAINFULLY slow. I had a less than 100 b/s. But I let it do its thing. After all 200 Mb's were done, which took a couple hours, I rebooted my system. Now, I cant even connect to my wireless and the internet symbol (the wireless bars thing in the top right) is gone.
1) How can I get my wireless to work?
2) How do I get the wireless button back?
View 1 Replies
View Related
Dec 14, 2010
My wireless works flawlessly (aside from my generally crappy signal ahaha), but when I decided to do a minimal Ubuntu live install on my netbook [Asus Eee 1005PE] (I tried both 10.04 and 10.10 with the same results), it wouldn't pick up my ethernet.
I decided just to load up my existing OS (Ubuntu 10.04 32-Bit) and got the same thing.
The wireless, as stated before, works without a problem, and it's weird, because the wireless manager says that knows the ethernet connection is there, but it won't connect to it...
[Edit: I did play around with different combinations in the BIOS (ie: lan enabled, wlan disabled, ect...)
View 3 Replies
View Related
Mar 9, 2011
I facing a really annoying problem. I download regularly during the night using Wifi. The problem is that because I'm away, the wireless just disconnects and the pop window shows up asking me to into the password. The password is already saved in the windows so I just have to click 'connect'ut I don't understand why does it disconnect and when it tries to connect it asks for password again!y doesn't it simply 'try' to connect without asking the password when it is already saved.
View 3 Replies
View Related
Apr 11, 2011
I just loaded 10.10 onto a stock hp pavalion zt3000 and everything is running fine except it won't detect my college's wifi network. It picks up everything else and runs without a hitch. (I'm actually on my work's wireless network atm) The network is not hidden and doesn't have any encryption. The wireless is on and has even detected other networks when it doesn't see the school's. I searched but couldn't find much on this specific problem but Im guessing/hoping its something simple here's the hardware: Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
here's ifconfig:
eth0 Link encap:Ethernet HWaddr 00:02:3f:67:05:ff
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]...
View 2 Replies
View Related
Apr 22, 2011
i'm using a dell n5010 recently i installed ubuntu9.10 in my laptop and it doesn't seem to detect wireless connections, so, i googled it and downloaded a driver from broadcom and tried to install it as per the authors instructions and nothing seems to work well, the broadcom drivers are not detected in the additional drivers and when i try to install linux-wlan-ng tarballs it doesn't seem to work even, though i have gcc(i think thats it), so, i installed my windows driver through nsdgtk but it says that it is "unable to see if hardware is present" but, when i click ok on the error the wireless network applet says the hardware is present and when i click the network configuration tool it gives the error message "could not find a network configuration tool" and after configuring my network with network tools in administration it says "no wireless extensions" when i type 'iwconfig' and there is no ip address when i type "ipconfig".
View 9 Replies
View Related
Mar 22, 2010
I've recently installed KDE 4.4.1 just to try on a Dell 1545 laptop with Ubuntu 9.10 previously installed.
My problem is that the wireless connection works just perfectly with nm-applet under Gnome, but when I login on KDE and ask KNetworkManager to connect to the same network as before, it can't finish the connection.
When I choose the connection the program asks for my passphrase, I type it and then it just sticks on "activating network" and nothing happens.
My experience with KDE is zero, so I don't even know where to start looking. I'd even tried to kill KNetworkManager and try to replace it with nm-applet, but I think there's a daemon that restarts it immediately.
View 1 Replies
View Related
Apr 12, 2010
I am having trouble with my laptop's wireless. It doesnt work after a normal shut down. The version is 9.10 and my computer is lenovo T400.
Below are some outputs of commonds.
Code:
op@power:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
[code]....
View 2 Replies
View Related
Jun 7, 2010
I just installed Ubuntu on my windows pc with no problems....except for wireless that is. I have a USB Linksys WUSB54G adapter to access my 2WIRE, WEP network. The thing is, it shows up in the top right hand corner. It even gives me the signal strength. But when it comes to using Mozilla, it is never able to access a page. If I try to Ping something, it's unable to. So I thought maybe I need to use ndiswrapper with my .inf and .sys files from the driver for my windows. I installed it, and added the driver to it...everything went O.K. I check it and it says it's installed and working. Again, I can see the wireless networks, and "connect" but when I try to use the connection there is nothing. I have also tried my neighbours non-WEP connection, but it still doesn't work. So I'm sort of at a loss with what I should do now. I see the networks, can "connect" but can't browse. I installed the drivers from my windows, and it still doesn't work. I used a LIVE CD of Knoppix and I can connect to the Network within 30 seconds and start browsing the net.
View 2 Replies
View Related
Sep 7, 2010
Have tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.
View 3 Replies
View Related
Sep 12, 2010
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
[Code]....
View 4 Replies
View Related
Sep 20, 2010
I installed Ubuntu on a machine after erasing everything else and the wireless has never worked. It says that the wireless has already shut down even though it recognizes the wireless network and my other non-linux machines see the network and work fine.
View 1 Replies
View Related
Oct 20, 2010
I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit
View 2 Replies
View Related
Oct 22, 2010
Yes, that's correct, it's a Celeron 400 running Xubuntu. And the card was working on 9.10, but not working anymore in 10.04 neither in 10.10.I've no other idea and I'm really considering moving back to 9.10Is there anything else I can check.
View 6 Replies
View Related
