Ubuntu Networking :: Cannot Connect To Unencrypted Wireless Networks

Mar 23, 2010

I have a machine running Xubuntu [2.6.22-14-generic]. I have been trying to get this machine connected to wireless for ages, and I'm having another stab at it. So far I have install ndiswrapper and loaded the driver for a Linksys wireless adapter. The output of 'ndiswrapper -l' reports:

Code:

wusb11v4 : driver installed
devoce (13B1: 000B) present

So as far as my newbie knowledge goes, I believe that step to be completed, correct?When I turn on the machine is type in

Code:

sudo sh
modprobe ndiswrapper

to get the card running to where it will appear in the iwconfig dialog.The commands 'iwlist wlan0 scan' will list all the wireless networks around me, but I have been un-able to connect to any network, even unencrypted ones. I have tried to connect both through Wicd and command-line to no avail. For command-line I have used:

Code:

sudo ifconfig wlan0 down
sudo dhclient -r wlan0
sudo ifconfig wlan0 up

[code]....

With the final 'dhclient wlan0' commands, the following is returned:

Code:

There is already a pid file /var/run/dhclient.pid with pid 134519120
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium

[code].....

I have attempted to go ahead a step further and connect to an encrypted wireless network, however, I receive the same message, as well as another error message upon trying to enter the key, with the following code:

Code:

iwconfig wlan0 key s:"thekey"

Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument.

View 3 Replies


ADVERTISEMENT

Ubuntu Networking :: Cannot Connect To UNencrypted Wireless Networks?

Sep 27, 2010

Here is a situation I have never come across (though I have only been using linux since 2004).I am running ubuntu 10.04 and using Wicd Network Manager.I can connect to my WPA encrypted home network, but if I go to my coffee shop to use their unencrypted wifi - I cannot.Even using the terminal. I think it is the way the device sees the network - but I don't know how to fix it.I have a screenshot with wicd here:And one with connecting to the essid here:Afterwhich, dhclient was unable to obtain an ipaddress - just like wicd above.

My iphone connected to this network easily without encryption or needing to use the browser to authenticate, etc.Any ideas on how to fix this?Specs:Samsung NC10lspci:

Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)

[code]....

View 3 Replies View Related

Ubuntu Networking :: Wireless Can See Networks But Fails To Connect

Jun 30, 2010

I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.

View 2 Replies View Related

Ubuntu Networking :: Detect Wireless Networks But Cannot Connect

Aug 1, 2010

I have a WLAN Driver Azure Wave AW-NU222 Wireless LAN Card in my Medion computer.

After installing Ubuntu it seems to detect the wireless networks in my area. However, when I try to connect to my network, it tries for several minutes and then times out with no error message. I have set up the credentials and also tried removing the encryption (WPA-PSK) from the network itself, but it still doesn't connect.

Connect via an Ethernet cable is fine, and I know that the network is good because I can connect via my Windows Laptop and various other wireless devices.

I suspect it's due to drivers, but I'm having trouble downloading a driver which I can try and install using Ndiswrapper. The Medion website just a windows executable when I try and download the driver specific to my machine when I really need the .inf file.

View 6 Replies View Related

Ubuntu Networking :: Netbook Won't Connect To Wireless Networks

Oct 6, 2010

I have a HP Mini1000 and recently switched over to Ubuntu. I followed the directions found here:[URL] However, I still cannot connect to wireless networks though my card seems to be scanning for them and finding them. I have tried connecting to open networks and ones that require authentication.

View 1 Replies View Related

Ubuntu Networking :: Natty Can't Connect To Wireless Networks?

May 8, 2011

Got Ubuntu 11.4 installed on my Lenovo Thinkpad X220.Except very very rare cases i'm not able to establish awlan connection.Scanning is possible at all times, monitor mode works as well.Network Controler (lspci)

Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)

[code]....

View 4 Replies View Related

Ubuntu Networking :: 11.04 - New Wireless USB - Finds Networks, Can't Connect?

May 20, 2011

So I was the one who couldn't get their ethernet port to function properly. Most likely, this was the result of bad hardware since none of the community's suggestions for software fixes did anything. I believe this is probably true.Indeed, when I bought a cheap $10 wireless USB dongle, it immediately worked better than all the previous things. It detected networks, displayed network strength and even allowed me to attempt login.

The only problem now seems to be that it cannot login. I've rechecked the password countless times, but it just shows the 'connecting to wireless' animation for a minute or two and then poops out and says, 'disconnected'.I assume if everything is getting me this far, the driver is not the problem with the device. Is this a safe assumption?

View 2 Replies View Related

Ubuntu Networking :: Atheros Wireless Card Can See Networks But Can't Connect

May 30, 2010

I've installed it no problems on my desktop and I really love it. Now I'm trying to install it on my Satellite and I'm having a couple of problems. When trying to connect to my wireless network, I can see my network, but it will just keep asking me for my WEP. I've confirmed that there is nothing wrong with the network or the password I've provided. Sometimes when I boot up, the network manager just says that the wireless networks are disconnected and can't find any. The wired connection always works just fine.

Here are the system specs:

Toshiba Satellite M45 S169
Ubuntu 10.04 Lucid Lynx LTS Fresh Install

Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
Kernel driver in use: ath5k
Kernel Modules: ath5k

View 3 Replies View Related

Ubuntu Networking :: Wouldn't Search For Or Connect To Wireless Networks

Nov 27, 2010

I have been trying to connect to a wireless network and cant get farther than the network settings window. I can do just about anything with WIN XP but decided Ubuntu was 100x better and more stable. I can't get Ubuntu to search for Wireless networks or connect to one i typed in manually.

For any one who wants to know: I am using a...

HP Probook 6555b (laptop)
2Gb RAM
160Gb HDD
a/g/n wireless + BT
XP PRO running side by side with UBUNTU desktop 10.04 LTS
2.09Gh AMD II P320
32-Bit system
and FYI: I know "geek-speak" so no need to dumb-down or explain basic stuff.

View 7 Replies View Related

Ubuntu Networking ::wireless Detects The Available Networks But When Try To Connect It Doesn't?

Jan 2, 2011

so my wireless isn't working. My netbook wireless detects the available networks but when I try to connect it doesn't. The box that asks me to put in the password occasionally shows up but it still doesn't load. I even tried re-installing Ubuntu and didn't fix anything.I'm using kernel version 2.6.35-22-generic and

Code:
*-network
description: Ethernet interface

[code]...

View 7 Replies View Related

Ubuntu Networking :: Wireless Networks Detected But Unable To Connect / Fix It?

Jul 27, 2011

New Ubuntu user here, and I'm having difficulties connecting to my router at home. I've searched around the forum for a couple of hours now, to no avail. My router was originally not broadcasting ssid, so I turned broadcasting on. Now I can see the router, but when I enter a password (which I know is correct) nothing gets connected.

View 9 Replies View Related

Fedora Networking :: Detects Wireless Networks But Cannot Connect?

Nov 29, 2010

Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.

View 4 Replies View Related

Ubuntu Networking :: Laptop Unable To Connect To Wireless, Wired Networks?

May 28, 2010

I'm trying to install Ubuntu 10.04 on my Toshiba A200-12U laptop (with an Atheros AR5007EG wireless card), but networking is being problematic.I entered Network Configurations and tried to get 'Auto eth0' working -- I went to Edit > IPv4 settings and filled in 'Addresses' with the details of my connection:

Address: 192.168.1.254 (the local IP of my router)
Netmask: 255.255.252.0
Gateway: 94.195.208.1

[code]....

View 4 Replies View Related

Ubuntu Networking :: Broadcom Bcm4306 Won't Find/connect To Wireless Networks?

Oct 16, 2010

i'm running ubuntu 10.04. i've followed these instructions:[URL]that got the light for the wireless on my laptop to light up but it doesn't seem to be able to find any networks.when i click on "connect to hidden wireless network" and enter the details + encryption code. it spends a few minutes trying to connect before asking for my encryption code again but i know that the code i entered is right.i'm using a belkin router with wpa/wpa2 encryption. but i think it's a problem with the wireless on my laptop rather than a problem with my specific network because under windows on other machines in my house i can see some of my Neighbours networks

View 2 Replies View Related

Ubuntu Networking :: Wireless Networks Detected But Unable To Connect / Enable It?

Mar 5, 2011

I'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.

View 7 Replies View Related

Ubuntu Networking :: Unable To Find Wireless Icon - Connect To Other Networks?

Apr 8, 2011

I am not able to find the most Wireles icon, I want to connect to other networks, so there will not I print a summarizing what is happening.

View 3 Replies View Related

Ubuntu Networking :: Connecting To Unencrypted Wireless Network From Command Line Installation

Jan 8, 2010

I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.

View 1 Replies View Related

Fedora Networking :: Unable To Connect To Wireless Networks And Unable To Configure Network

Jul 27, 2010

I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.

Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network

However, there is no Network option under System>Administration.

Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."

View 12 Replies View Related

Fedora Networking :: Wireless Issue, Detecting Networks But Wont Connect "WEP"?

Oct 31, 2010

I'm running fedora 13 but I'm having issues with the wireless connection, I can see all the networks in the area but when I try to connect it does not seem to accept the wep key.Its a Belkin receiver, could do with a little help as this is such a pain. I'm using a pc.---------- Post added at 05:24 AM GMT ---------- Previous post was at 04:59 AM GMT ----------This maybe some use but I don't know much about it.

[Barry@localhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:18:8B:90:19:01
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[code]...

View 7 Replies View Related

Ubuntu :: Can't Connect To Wireless Networks?

Nov 12, 2010

just downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?

View 4 Replies View Related

Ubuntu :: Cannot Connect To Wireless Networks Through User

Jul 5, 2010

Well the thing is i cannot connect to a wireless network, when i log in the nm-applet won't show, if i wait about 20 minutes it will show .. and if i clicked on it requires a password, when i enter the password it freezes!! i tried uninstalling the nm-applet and reinstalling it, didnt work

View 5 Replies View Related

Ubuntu :: Unable To Connect To Wireless Networks

May 22, 2011

While staying at a hotel that offered wireless Internet connection connection I was not able to access their network. I contacted their technical support 800 number and was told that the north building server had been down for 26 hours. I moved to a south builing room. Same problem. I went to McDonald's, which had wi-fi connection. Same thing. My laptop was not able to make a connection.

My question is as follow:

How do I find out:

1) whether it is a problem with my new Ubuntu version (10.04)?

2) my wireless card in my laptop is no longer working? Are there any tests that I can run?

View 2 Replies View Related

General :: Wireless Networks Seen But Never Connect To WPA / WEP?

Sep 2, 2009

I am fairly new to linux, I getting to grips with the offline and I am starting to be converted. The major problem I have is that I cannot get it to connect to my wireless network. I am using Fedora and my wireless card is the Belkin Wireless G Desktop Network Card - F5D7000uk (version 3000uk).

I am able to see the network and pick up the essid automatically through networkmanager or iwlist scan. I have tried to connect using Network manager:
- it picks up the information and I submit my WEP key and the icon top right shows two green dots with a blue flame(?) rotating between them for a few minutes before asking for my key again.

And using the terminal commands.

Code:
$ sudo iwconfig wlan0 mode managed
$ sudo iwconfig wlan0 essid "BTHomeHub3-12GT"
$ sudo iwconfig wlan0 key 563865428
then tried to test the connection using

Code:
$ sudo ping www.bbc.co.uk
ping: unknown host www.bbc.co.uk

Code:
sudo iwconfig wlan0
wlan0
IEEE 802.11bg ESSID:"BTHomeHub3-12GT"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management: off
Link Quality: 0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

View 3 Replies View Related

Debian Hardware :: Can't Connect To Wireless Networks?

May 11, 2011

I've got Debian wheezy running on my Lenovo Thinkpad X220.Kernel is 2.6.38 with compat-wireless modules.Trying to connect with an wireless network fails every time -even on unsecured networks.

dmesg output:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to xx:xx:xx:xx:xx:xx (try 1/3)

[code]...

View 9 Replies View Related

Fedora :: Want To Add A User That Can Connect To Wireless Networks

Dec 31, 2010

I want to add a user that can connect to wireless networks, use all the video and audio stuff etcetera.

i know to use the User and Group management application for that. but how do i enable their use of the wifi, video and audio stuff please?

View 2 Replies View Related

Ubuntu Networking :: Can Not Connect To Wifi Networks - Can See Them But Not Connect - 11.04

May 3, 2011

I can not connect to wifi networks, i can see them but not connect.

My wifi device is:

View 9 Replies View Related

Debian :: Bridge Setup - Cannot Connect To Any Wireless Networks

Apr 12, 2011

I am a (somewhat) newbie to Linux (but have an extensive Windows background), and I have just installed Debian Squeeze in an old EeePc 701 4G using the netinst version only with the following packages:

eeepc-acpi-scripts
x-window-manager
gnome-session
gdm
gnome-themes
gnome-themes-extra
plymouth
bridge-utils

Now I would like to install Debian in my main laptop, but I think it won't be able to connect to any wireless networks during setup and before installing firmware-brcm80211 and wireless-tools (its wireless card is a Broadcom 43224AG). That being, and to avoid connecting the computer directly to the router (it is not easy), I would like to bridge the EeePc's wireless connection to my laptop using a cable. I tried using the instructions found at the Debian Wiki, but I couldn't set it up properly.

View 1 Replies View Related

Debian Configuration :: Can't Connect To Wireless Networks At School

Mar 10, 2011

I installed Debian sid recently. I installed the B43 driver and wireless is working just fine at home and elsewhere. I can't connect to the wireless networks at school though. There are two networks, one is unsecured (and you have to enter your login details after connecting - I can't connect at all though), the other is secured. I was previously using Ubuntu, with network manager, and I have all my settings the same for the secured network as I did in Ubuntu. In Ubuntu I can connect to both networks just fine. In Debian I can't.

View 7 Replies View Related

OpenSUSE Wireless :: Knetworkmanager Fails To Connect To WEP Networks

Dec 24, 2009

Since my update to OpenSuse 11.2 knetworkmanager refuses to connect to WEP enabled networks (worked fine with knetworkmanager 11.1). I am sure that I use the correct password and I tried on 3 different networks. The manager is connecting to open networks and WAP protected networks without problems. I saw on other forums that there were similar problems with previous versions of networkmanager. But I could not find a solution for my problem.

View 9 Replies View Related

OpenSUSE Wireless :: Atheros AR928X Can See Networks But Can't Connect

Sep 9, 2010

I just installed OpenSuSE 11.3 x86_64, and as I'm new to OpenSuSE I can't get my wireless to work. I believe it should work because it worked out of the box in Ubuntu (9.10 and 10.04)

At first I didn't see any network icon in the notification area, but after some googling figured out to enable NetworkManager instead of ifup. Now there is an icon, and clicking it I can see wireless networks, but when I try to connect it tries for a while, then seems to give up.

/sbin/lspci gives

Code:
Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter PCI-Express) (rev 01)
/sbin/lspci -n gives
Code:
168c:002a (rev 01)

[Code].....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved