Ubuntu Networking :: Setting Iwconfig Speed Automatically
Feb 26, 2010
i've had problems with a laptops wireless card (using 8.04).i can connect to my network but only at 1mpbs. so, searching through the forums, i found a post that said to issue this command: Code: sudo iwconfig wlan1 rate 11M and that seemed to solve my problem, temporarily.now i'm growing tiresome of doing disabling wireless, issuing the command, and then bringing the wireless card back up. is there a way i can do this automatically upon boot? i checked out my interfaces file, but it only has the loopback setting in there.is there a config file somewhere that i can set the rate of the wireless card manually?
View 2 Replies
ADVERTISEMENT
Mar 22, 2010
Using ethtool I can set LAN speed and duplex setting.I have Windows PC1 configured at 100MBPS Full Duplex. I have a linux PC configured in auto-negotiation. Windows PC1 can ping linux PC2 using cross over ethernet cable but not using straight cable. Also if I set linux PC2 in 100MBPS Full Duplex mode and Windows PC1 in 100MBPS Full Duplex mode ping is not successful eiether using straight or cross over cable. Is the second PC need to be in auto negotiation mode?
View 3 Replies
View Related
Mar 31, 2010
is there a way to make the cpu fan turn faster at certain speed when the cpu temp. reaches lets say 65 or 70c automatically thru a script or config file ?
View 2 Replies
View Related
Mar 3, 2010
I use iwconfig to connect to my networks cuz i have fluxbox as my window manager. At home my network key is just a phone number and i can connect fine. at my college campus the key is "thinkofspring" and every time i do
Code:
sudo iwconfig wlan0 key thinkofspring
i get an error that the key is invalid or didn't work. Do i need to use a different command for full text keys? I'm running ubuntu 9.10
View 1 Replies
View Related
Jun 27, 2010
I recently got my Belkin USB wireless adapter working by following some other threads in these forums. Now I would like to connect to my access point. iwlist scan works great and I can see my AP along with others. However when I follow the step by step instructions here: [URL]... I fail during the DHCP request with no DHCPOFFERS. My AP is using WEP encryption for now (I've even tried it with open encryption). The thing that I'm seeing or not seeing is that when I set my essid using sudo iwconfig wlan0 essid "GimpsHouse" and then after that do an iwconfig it says off/any. Here is my iwconfig
[code]...
View 3 Replies
View Related
Feb 21, 2010
I have an Atheros AR928X Wireless Adapter (built in to laptop). I can connect to net works with nm-applet fine, but when I use iwconfig, There are no changes. Example:
Code:
$ iwconfig wlan0 essid Convery
$ iwconfig
shows no changes, not even when I set the access point to the right address.
View 3 Replies
View Related
Jul 3, 2011
I have an IBM T60 with Intel 3945ABG WNIC:
Module for this WNIC is loaded:
Code:
Code:
If I execute "iwlist wlan0 scanning", I see the cell I'm interested in:
Code:
I'm able to connect to this cell using Gnome "Wireless Networks" manager, but not with iwconfig. At first I tried to connect to this "bq" network while wlan0 was active("ifconfig wlan0 up") using the iwconfig but this didn't change any of the wlan0 parameters.
Then I tried to shutdown wlan0("ifconfig wlan0 down") and executed:
Code:
Now the changes applied and "iwconfig wlan0" gives following:
Code:
Everything seems to be correct, but I'm still "Not-Associated". I have tried with "iwconfig wlan0 essid bq", "iwconfig wlan0 ap 00:24:14:F9:0B:92", "iwconfig wlan0 essid "bq" mode Managed" etc, but whatever I try, it does not connect. I even did "/etc/init.d/gdm stop" in order to be sure, that Gnome "Wireless Networks" is not interfering with "iwconfig", but this gave no results as well. I can associate with this AP using the Gnome "Wireless Networks" just fine, but for some reason I can't connect using iwconfig.
View 4 Replies
View Related
Jun 2, 2010
I have a tenda W311u wireless with a ra3070sta chipset, i read a lot of tutorials to get it working. I recently had my wireless working but just in NetworkManager. I need to get working in console mode, for example when i make a:
Note: The Essid the same i added in the RT2870sta.dat file.
And therefore if i try a dhclient3 ra0 no dhcp offers received.
Rare, but if i start NetworkManager connected to azcor, and i make a dhclient3 ra0 i get an ip very fast.
I try with cnetworkmanager but is complicated and isnt working for me!
View 6 Replies
View Related
Jul 6, 2010
ubuntu is capping my wireless connection at 1Mbps, so everytime I boot up i have to type this:
"iwconfig wlan0 rts 2347 && sudo iwconfig wlan0 frag 2346 && sudo iwconfig wlan0 rate 9MB"
How can I make these settings persistent?
View 2 Replies
View Related
Dec 14, 2010
left to its own devices my wireless connects at too low a speed. I have a 20meg internet connection and my wireless is slowing it down to like 3meg. When I reboot into windows it's fine. When I run iwconfig eth1 rate 11M or even 24M the connection is much faster and runs fine, why won't it automatically go higher? Is this the fault of the driver? I am running Broadcom's driver compiled from source. Also, how can I set it to 24M at boot?
Edit: I guess I can put iwconfig eth1 rate 24M in rc.local, but I'd still like to get auto running higher, especially as my signal should be pretty good. Output from iwconfig white rate=auto:
eth1 IEEE 802.11 ESSID:"honeypot"
Mode:Managed Frequency:2.417 GHz Access Point: xxx
Bit Rate=1 Mb/s Tx-Power:24 dBm
Retry min limit:7 RTS thrff Fragment thrff
Encryption keyff
[Code]...
View 1 Replies
View Related
Apr 5, 2009
I'm running fedora 8 and i have a TEW-424ub. I recently ditched windows, and the only disk i could get was a Fedora 8 dvd. I used ndiswrapper to get my driver installed, then I used the iwconfig commands to hook myself up to my wireless. However, every time i do the command
Code:
My comp freezes up. I then decided to use the GUI to set it up, as it might be less aggravating. It found my network, i input the key, double-check, and it atttempts to connect, then asks me once again.'
Also, if I go to Network Configuration, and activate my ndiswrapper device, it gives me the error & my comp freezes up "Set Encode" (8B2A) SET failed on device wlan0:0 ; Invalid argument.
View 5 Replies
View Related
Feb 20, 2010
I am having some problems with my wireless card. If I ping my pc with no activity on it, it just won't respond to the pings. But if I start pinging from the PC and then from somewhere else, everything works perfect. I found out this problem since my ftp service was not responding sometimes. So looking for info and checking some parameters I found the "Power Management" option in the iwconfig command. It's value is "on" so I tried turning it off and It seemed to have solved the issue. The thing is that after a reboot, it returns to it's default value. Is there any way to make this parameter value permanent?
View 4 Replies
View Related
Apr 16, 2010
I have one laptop running under Windows and another under Linux. I can access and surf the internet on both computers. But the Linux laptop is painfully slow.
If I ping my gateway the Windows lappy does in in 1 ms but the Linux in 20ms. iwconfig reports errors under Rx invalid crypt, tx excessive retries and huge numbers under invalid misc, and nothing on the rest.
The router is encrypted with WEP and iwconfig reports the correct key.
View 8 Replies
View Related
Mar 19, 2010
I am currently in process of remodeling my home file server and would like some advice. The server has two internal hard drives that are rather small (10-15G) and I've now ordered a larger 2 TB drive which for the time being will have to run as an external drive through USB 1 (going to be rather slow).
I'm probably going to put the OS and swap on one of the internal drives but I was wondering if there was a good option for increasing the system's performance by making the second internal drive act as a kind of buffer for the 2TB usb drive. I'd like both the advantages of the large size of the USB drive and the fast read/write speed of the internal drive. Would it be possible to put it together so all reads and writes to the fileserver would first go to the fast internal drive (or even better, to internal drive and USB drive at once, although I suppose RAID is not an option with USB attached storage), and would then be put to the large drive. It would also be nice if the most used files from the large USB drive would be cached on the internal drive for fast read speed. I understood that ZFS would help me accomplish something the like but as I understand, it's not that easily available on Linux.
The current plan is to make the large drive a simple XFS drive and build a small daemon on the server that would simply move all new files from the internal drive to the USB one, once they are not used but it would be nice to have a more low level solution.
View 3 Replies
View Related
Mar 28, 2011
In our family we have an Eee PC / in Windows7 and openSUSE 11.4 everything is working. In Mint 10 Gnome 64 and 32 bit and Fedora 14 Gnome 32 bit we don t have wireless with persistent USB. iwconfig > no wireless and Networkmanager does not show wireless.
View 8 Replies
View Related
Feb 6, 2010
I still cannot access to internet. May I know why?
Is it due to the Error for wireless request "Set Encode" (8B2A)
The step i did:
1) iwlist eth1 scanning
2) sudo iwconfig eth1 essid shabana key s:xxxxxx
3) invoke firefox ... cannot surf
Do I need to set dhclient? how should I set? DO I need to enable wpa_supplicant?
iwlist eth1 scanning
sound like I was able to connect to ESSID:shabana. Is it true?
The linux is Centos 5.4
View 3 Replies
View Related
Jan 31, 2011
I am trying to connect to a wireless network. I got a problem with network manager. So I try to connect manually
I found wireless network around by using "iwlist scan" command.
I want to connect to a network with ESSID "MCC(Mandalay)" and Key "mdymcctraining"
Here is my problem The output of "iwconfig" command is
Code:
What does it mean "invalid argument"? It means that my wireless pre-sharedkey is not correct? I am sure the key is valid. It is used by any others with window 7.
View 1 Replies
View Related
May 28, 2011
My wireless usb will not attempt to connect to my AP even though it shows in ifconfig and iwconfig:further information which i believe may helplspci -v
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: VIA Technologies, Inc. Device aa08
Flags: bus master, 66MHz, medium devsel, latency 8
[code]....
View 1 Replies
View Related
Nov 8, 2010
I'm looking for a USB adapter with driver support for running the interface in master mode.
View 1 Replies
View Related
Feb 24, 2010
I'm having some difficulty setting my txpower setting on my atheros wifi card. I am using ath_pci driver on ubuntu 8.1 64 bit. I can set the txpower to whatever, 12dBm for example, it accepts the change but quickly reverts back to a default value of 8dBm. Power saving is off. How can I make these changes permanent, or adjust the default value?
View 2 Replies
View Related
Aug 22, 2010
I just installed Fedora 13 from the Live CD. FIrst off I read the guide and the first step doesn't even work for me. System>Administration>Network does not exist. If I go to System then Preferences I see a Network Manager but it looks nothing like what these screen shots look like. [url]
No wireless card show up in the wireless tab of Network Manager. How can I fix this since my card is listed in ifconfig and iwconfig. Wifi card is a Zonet zew2500p
View 2 Replies
View Related
Nov 10, 2010
I have just upgraded my system to Fedora 14. One thing I noticed after running some applications on it is that it is not possible anymore to figure out on what frequency a wireless interface is using. If I set a wireless interface to monitor mode and perform the iwconfig or iwlist command, in the past, I could see the frequency used on the interface, but now, this information is not present anymore. My wireless interfaces are in monitor mode.
Has the frequency information been removed from iwconfig or iwlist commands? If it has, is there another way to report this information?
Here is an output from iwconfig on my system:
View 4 Replies
View Related
Sep 18, 2010
I am using backtrak 4 because i wont to hack a wireless network and when i wrote iwconfig it dose not work. see this [url] and i am using dell laptop dell inspiron 1545.
View 4 Replies
View Related
Feb 8, 2010
In what way I can set the processor scaling to switch automatically on performance while the pc is connected to the AC.
View 4 Replies
View Related
Mar 11, 2010
The adapter I purchased (Zonet ZEW2508 ) uses the Ralink 2070 chipset - a fact that originally excited me because Ralink seems to be fairly loving to the Linux community. However, despite my best efforts I can't get the thing to work. Initially I tried following directions to set up the driver you can download from the Ralink website. The directions I found were written February first, and Ralink updated the driver February eighth - so as far as I can tell the directions no longer work. After screwing around trying to figure that out for a while I decided to give ndiswrapper a go.
Initially this seemed promising. I just harvested the drivers from the CD and followed one of the many ndiswrapper directions available - most helpful seemed initially to be the Ndiswrapper Troubleshooting Guide found in this forum, however the solutions offered there didn't work either. When I throw an ndiswrapper -l into the terminal it looks promising at first, it tells me the driver is installed and the device is present, but it just doesn't work. When I try iwconfig, or iwlist scan it tells me "no wireless extensions," and "interface doesn't support scanning" respectively. The only devices even listed are lo, eth0, and pan0. There's no wlan0 or anything of the sort.
View 1 Replies
View Related
Mar 21, 2010
Ubuntu 9.04 with working wlan. I had to restart router & wap. It doesn't seem to ever retry to connect. I know my router & wap are good, I have wireless working on other laptop (running Puppy) I had to go into 'edit connections' in drop down and use 'wireless' tab then edit 'wireless connection 1' and hit 'apply' is there a better way to do this? also, no connections show up with command 'iwconfig' edit: with ifconfig, eth1 si showing data my ip address and packets sent & rcvd. I think I'll try do duplicate this event and use 'ifconfig eth1 down' and then up again to see if it reconnects.
View 1 Replies
View Related
Apr 4, 2011
I updated my system from FC13 2.6.34.7-66 to 2.6.34.8-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
View 2 Replies
View Related
Apr 8, 2011
I have in System-->Administraytion-->Login Screen setting checked 'Log as Azyx automatically' so then the computer boot up I don't need to type password.But when my laptop have going to suspend and wakeup I have to type my login password. How do I change so I don't need to do that?
View 6 Replies
View Related
Jun 15, 2011
I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
View 3 Replies
View Related
Jan 16, 2010
What does the command "sudo iwconfig eth1 txpower off " do
View 2 Replies
View Related
