Ubuntu Networking :: Poor Connection On The Jaunty?

Jan 12, 2010

I'm trying to connect to the wireless netwrok of my university, which does NOT require any password. When the computer starts is automatically connects to the network and it always worked well, but now a message appears that says "authentication required" and it says that the network requires some sort of password or key. This is weird because it had never given me the problem. The options in the box are "Cancel" and "Connect", but "Connect" cannot be marked. There's also a dropdown box in the box that says "Security Type" and the option is "none". No other option is available for marking. After canceling the message and trying to connect like 50 times, I finally got a very poor connections. My email took forever to open and I opened the terminal to download something that someone said had solved the problem

Code:

sudo apt-get install linux backports-modules-jaunty

But it has taken forever to download, which proves the connection is working but it's in really bad shape. Any hints on how I may solve this? I read several bug reports and fixes similar to the problem, but they were very old (apparently a bug that was in Gutsy and then continued in some cases in Jaunty).

EDIT: Now I definitely can't connect. One strange thing was that at my house I couldn't connect either, but this time because I didn't even had the wireless option available anymore. I went to Hardware Drivers and realized 2 things:There were 2 drivers recognized, which is weird because I had always had only one, which is the Broadcom STA Wireless Driver, and there was another one, also wireless related,. but which name I don't remember Both drivers were deactivated, which again is strange because the STA was always activated before.

I activated the STA driver only. because I feared that two activated wireless drivers may have conflicted with each other. The Wireless started working again and I connected to internet with no problem. My home connection, by the way, needs a password.Now, back in University, whose wireless does not need password, the same problem happens. It says "Authentication required by wireless network" "Passwords or encryption keys are required to access the wireless network 'UC'." The a dropdown box with the title "Wireless Security" and with the only option available marked: "None". The the options in the dialogue boz are Cancel and Connect, which cannot be chosen.

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Venison MIFI Mobile Broadband - Jaunty Jackalope Doesn't Detect The Connection

Jan 7, 2010

I am trying to use Verizon MIFI mobile broadband and ubuntu jaunty jackalope doesn't detect the connection. Verizon has software for mac and windows but not for linux.

View 1 Replies View Related

Ubuntu :: Slow Internet Connection And Poor Sound Quality

Mar 7, 2010

So far i have tried ubuntu. seems great however i've had trouble with internet connection and soundcard problems. (slow internet connection and poor sound quality. I was thinking of trying kubuntu. Do you think i'll have the same problems?

View 2 Replies View Related

Ubuntu Multimedia :: Jaunty ATI Xserver No Backfill After Jaunty-proposed Update

Jan 9, 2010

Been using since summer 2009 the xserver no backfill from PPA: [URL] and it was working fine with my ATI video card. No heavy CPU usage when restoring from minimized and a general performance boost were the results of that use.But recently made an upgrade and realized that xserver-xorg-core package (check it from synaptic manager) has been upgraded to a jaunty-proposed version and the problems started to appear again!So using Synaptic I selected this package and hit CTRL-E key in order to choose the nobackfill version. This way things got back to normal!

View 2 Replies View Related

Ubuntu Networking :: Wireless Networking - Signal Very Poor

Feb 21, 2010

My mother has Windows Vista and i have linux ubuntu. She has a special verizon card that she inserts into her laptop for internet. My computer also has an internal wireless card, but the signal here is very poor. Supposedly, among windows computers, I would be able to get a flashdrive, and with a little program uploaded from my moms computer, set things up using the flashdrive on my computer to share the internet that she pays good money for =/ However, it wont work with ubuntu, which isnt in the windows inner circle. When I open the executable file with WINE it says that it cant run wireless network setup "on this version of windows". lawl. I was wondering, is there any way around that? Is there anyway to network with my mothers internet?

View 2 Replies View Related

Ubuntu Networking :: Jaunty Recognizing Net Adapter

Jan 5, 2010

I managed to get the older, weaker box on the net and running simply by plugging in the Belkin N-wireless adapter, discovering the Network Manager icon (this really should also be accessible from the system pull-down menu), left clicking to see all the local networks, selecting mine, and inputting the security key, and rebooting. Voila!)However, on the newer, more powerful box, the network Manager gives me nothing but "Wired connection" at every boot (there is no such connection), I created a wireless connection under the settings (accessed through create VPN settings), but the Manager sees no wireless networks. Reboot solves nothing Network Manager is not seeing anything, I suspect that the card although powered by the USB, is not being seen by the system.

View 8 Replies View Related

Ubuntu Networking :: Very Poor Wireless Performance - Packet Loss

Aug 5, 2011

I have ubuntu lucid running on Dell 230 PC, linksys WPN600 N wireless PCI network card connecting to a Cisco E3000 dual channel router.

Kernel: 2.6.32-33-generic
Installed Ralink driver v2.4.0.0

iwconfig shows that the bit rate is 130Mb/s and link quality is 98/100. I'm using the wcid network manager instead of defaul gnome one. I'm getting lots of packet loss and performance is very bad. The connection is practically unusable. I've tried installing the compat wireless backport package but that did not work at all.

View 1 Replies View Related

Ubuntu Networking :: Connecting To Secure Wireless AP In Jaunty?

Jan 13, 2010

My brother is trying to connect his laptop to his university's secure wireless network and is running into some problems.

He is receiving the following error messages with private info removed:

kern.log
=========
Code:
Jan 13 09:42:52 laptop kernel: [ 91.744131] wlan0: associate with AP
Jan 13 09:42:52 laptop kernel: [ 91.746454] wlan0: RX AssocResp from REMOVED (capab=0x421 status=12 aid=0)

[Code].....

Also, in my research it appears that people that have Wireless problems often install the linux-backports to see if this fixes the issue.

View 2 Replies View Related

Ubuntu Networking :: Wireless 802.11n Card That Works Out Of Box For 9.04 / Jaunty?

Jul 4, 2010

I have found a few older threads that have asked a similar question, but wonder if updates and new devices have improved the situation:

Is there a PCI (not express) 802.11n adapter that will work with 9.04/Jaunty "out of the box"?

View 1 Replies View Related

CentOS 5 Networking :: Poor Network Performance On New Server?

Jan 29, 2009

ok, we had to move one of our databases due to failing hardware. This box is newer than the old but it's just dog slow. 1st I thought it was mysql but now I am realizing it's the network. As a test, I tried copying a remote file to that box and the old server (located at the same co-lo, same provider), same switch, etc.Here are the results;

Old server:
access_log.1 100% 4192KB 1.4MB/s 00:03

New Server:
access_log.1 100% 4192KB 72.3KB/s 00:58

So now I see why people were complaining about webpage load times, etc. I can't figure out why the network latency. I looked around a bit, see below for some things, I thought mtu, nic speed, etc.

mii-tool shows;
eth0: 100 Mbit, full duplex, link ok
eth1: 100 Mbit, full duplex, link ok[code].....

Are there other things I can type to test or provide more feedback somehow to get more information.

View 19 Replies View Related

Ubuntu Networking :: Bluetooth Tethering In Jaunty Versus Windows XP ?

Jan 21, 2010

I have both Jaunty and Windows XP installed on my laptop (dual boot), and I have successfully tethered (via Bluetooth) my cellphone in Windows, but can't get tethering to work in Jaunty.

In Windows, when I paired my phone with my laptop using Bluetooth, Windows assigned two COM ports for Bluetooth to use. Then I configured dial-up networking, and all I had to specify was the dial string (*99**1*1#). Windows treats my cellphone as if it were a modem connected via a serial port. Works great.

When I pair my phone to the laptop when running Jaunty, I don't ever see serial ports getting configured as I do in Windows. And I've read that when the Bluetooth pairing takes place in Ubuntu, the networking wizard should start, but it does not. So, I go into network connections and create a new connection under the MOBILE BROADBAND tab (I check "connect automatically"). When I'm finished creating the connection, it says "never" to the right of the connection name, but I'm not sure what that is indicating. When I left-click the network manager icon on my desktop, it does not show any connections from which I can choose. I have no Internet connectivity.

I have proved that the Bluetooth link between Jaunty and my cellphone IS working. I have been successful sending files from my phone to Jaunty, using Bluetooth.

Am I going about setting up tethering incorrectly ?

View 2 Replies View Related

Ubuntu Networking :: Jaunty Server DHCP Renewal Fails Sometimes?

Jun 3, 2010

Ubuntu Jaunty Server connected via eth0 to a Billion residential ADSL router. I've locked the server MAC address to a specific IP in the router and set the DHCP renewal times to the longest possible times. For a certain number of days, the server will remain connected to the router, but then for some reason (the last time it was after about a month), the server loses it's connect and dumps into syslog the following:


Code:
Jun 2 17:10:15 defiant dhclient: DHCPREQUEST of 192.168.1.105 on eth0 to 192.168.1.254 port 67
Jun 2 17:11:26 defiant dhclient: last message repeated 5 times

[code]....

View 5 Replies View Related

Ubuntu Networking :: Jaunty Wifi Very Slow - 327W Router

Jun 14, 2010

I was introduced to Ubuntu about a year ago and recently decided to come back to using the OS. I now dual boot it with Windows XP Home. My former setup was with Wubi but now I have it installed on an actual partition. (The Wubi install, for whatever reason, had little internet problems.) I use wireless internet, and though my network card was recognized out of the box and can connect to my network, the Internet is very slow. It takes almost a minute to look up Google. Also, Firefox will often report that it cannot find the server for whatever website I try to look up, after trying to connect to it/look it up. I also cannot access the web configuration page for my router. (192.168.1.1). The network app reports that I often have a signal strength of 40% or lower. The following is my hardware/internet:

Ubuntu 9.04 Jaunty
TrendNet TEW-424UB adapter (54mbps)
Westell VersaLink 327W router
ISP: CenturyTel/CenturyLink High speed internet (512kbps)

I am the only Linux computer on my network. (There is no encryption on my network. I know there should be. but my parents are not very computer literate and they are the ones who have access to the network. It is easier just to go without.)

I have tried disabling ipv6, setting custom DNS server names under ipv4, and setting the wlan rate (or something similar) to 1492. Nothing works. This does not seem to be a network problem because my internet works fine in Windows, and I can access the configuration page for my router to change channels, PPP, etc..

View 1 Replies View Related

Ubuntu Networking :: Toshiba Satellite A205 S4707 / Jaunty 9.04?

Jul 16, 2010

i have been working with this laptop for a few days now, started out trying to use 10.04 but saw in a forum that 9.04 worked better ootb with this model box, total noob here but i have successfully run linux on a number of computers for the past 3 years but have never had this much trouble.

View 5 Replies View Related

Fedora Networking :: Chrony Seems Very Poor At Finding A New Network Interface

Mar 21, 2011

I use chrony on my laptop thinking it would be better for it than ntp because I'm frequently connecting and disconnecting from wireless cafe access points and going in and out of suspend mode. But I've also noticed that if chrony is started before the access point is connected it never syncs to the time servers. I have to manually restart it via the service command after I connect. This doesn't seem right to me, if chrony fails to find a network at start time, doesn't it periodically try again ?

View 1 Replies View Related

Networking :: Wireless Is Flakey -- Dropped Connections, Poor Speed?

Jun 15, 2010

My wireless is flakey -- dropped connections, poor speed, etc. As diagnosis, I loaded the 'wavemon' utility so that I might watch the radio and signal and noise.Things will be good, then fall off, then get better, then go away entirely. Repeat continuously and randomly. For these experiments, my laptops -- more than one -- are on a table.The table is roughly 15-20 ft laterally from the access point. The access point is also 8 ft above the floor vs. 3 ft table height.(grin) While the signal "wobbles" everything else is mechanically stable and otherwise not moving.

View 11 Replies View Related

Ubuntu Networking :: Wvdial Stops Working After Upgrade From 9.04 Jaunty To 9.10 Karmic

Mar 1, 2010

On a fully updated Ubuntu 9.04 system, I had successfully configured wvdial to connect using a USB modem ("Update" brand) with an ID of 067b:0611 (uses the pl2303 driver module). In considering an upgrade to Ubuntu 9.10, I tried a LiveCD and was unable to connect using wvdial. However, because I had made the CD a couple months before, I went ahead with the upgrade (via the internet; not a fresh install) in the hopes that it would end up working or I would be able to find a solution for it.

The Problem: The upgrade was a success as far as I could tell, but when I tried to connect to the internet with wvdial, I was not able to. I checked the wvdial.conf settings to make sure they were the same as before, added some new ones I thought it might need, unplugged the modem and replugged it, restarted my system, etc., but all to no avail. Whenever I would try to run wvdial to connect, I would get the following output:

Code:

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ

[code]....

This was different than the output I used to get with wvdial, but when I went over to my browser (Firefox) the internet worked fine. I'm assuming my email client and other things will work okay as well, but have not tested them as of yet.

A final touch I did to make connecting a bit less 'painful' was to right-click on the panel (at the top of the default Ubuntu screen), and click on 'Add to Panel'. Then I selected 'Custom Application Launcher', chose 'Application in Terminal' for 'Type', gave the launcher a name, pasted in that 'horrifically' long command line above, gave a brief description in the 'comment' box, then pressed 'OK'. Voila! I now have a launcher on my panel that with a single-click will bring up a terminal screen where I enter my sudo password and it connects. Then when I want to disconnect I just go back to that terminal, press Ctrl+C, which promptly disconnects me and causes the terminal to vanish into thin air.

Now, I don't know enough about this stuff to know why this command worked and wvdial didn't, but if you know, feel free to post a reply. Or if you'd like to see what settings I had for wvdial that worked in 9.04 but not in 9.10, let me know. Or if you think it's worth checking to see if this should be posted as a bug in either wvdial or Ubuntu, you can mention that as well.

View 4 Replies View Related

Networking :: Ubuntu Jaunty (v9.04) Vs DLink DIR-655 Gateway / Router / Access-point

Apr 24, 2010

Does anyone have experience with the D-LINK DIR-655 gateway OR router OR wireless access point? On the surface, I like this box, but it is giving me grief. First, it wants me to use a win-dose CD configurator application. I use the embedded web page configurator. Next, there are several configuration wizards at the embedded web page. After trying the wizards, I went to the manual screens to tinker to get something working.

So what is going on? When a LAN client connects, I want DHCP to present at least two "nameserver" values ... which then make their way into /etc/resolv.conf The DIR-655 plays some nameserver games like caching and blacklisting and other things. However, I get some ad-vert page from "dnssearch" or "yahoo" or similar when names don't resolve. I really don't want this behavior. Network-manager does not report the connection down, however streaming anything stops or "reconnects", browsing times out, LAN side traffic seems to stop as well.

View 1 Replies View Related

Ubuntu Networking :: Consulting Regarding Edimax Wifi-usb Supported Modes At Jaunty (master And Ad-hoc)?

Jan 25, 2010

After purchasing few wifi-usb-dongles for my jaunty and lost many hours, i had no success in bringing them to operate as master or ad-hoc.The devices were Belkin, Level1, and a TP-Link 620 Though the Belkin could work as ad-hoc, but very often disconnects due to buffers issue (though I couldn't build the zd1211b driver for jaunty and it seems that no one can really help with that).

Now I would like to consult with you ahead regarding new potential devices, whether you know it operates as master mode or ad-hoc mode under jaunty (9.04)?

My concerns are regarding:
1. Edimax EW-7318UG
2. Edimax EW-7318USg
3. Edimax EW-7711UMN
4. Edimax EW-7711UTN
5. Edimax EW-7311USN
6. Edimax EW-7717 nMax
7. Edimax EW-7718 nMax
[URL]..

View 1 Replies View Related

Ubuntu Networking :: PCMCIA Card Worked In Xubuntu Jaunty - Have The Inf Driver - Get It To Work?

Mar 5, 2010

still stalling after all those months, everything is explained here

[URL]

the card works fine in xubuntu jaunty, doesn't in xubuntu karmic or ubuntu karmic. i (my wife) wants to use ubutun karmic, but we still can't get this ATMEL PCMCIA wirelesscard to work on ubuntu karmic like it does on jaunty... and we have the windows INF drivers

View 9 Replies View Related

Networking :: Unable To Use Network Manager In Jaunty - Page Could Not Be Displayed

Mar 7, 2010

I have duel boot (XP & Jaunty). I have installed Jaunty in one of my parition through wubi installer. Problem is, though my network connection shows active, I am unable to connect internet via firefox browser or any other browser.

1. I have plugged in ethernet wired connection.

2. I have single network connection (wired connection1)

View 4 Replies View Related

Ubuntu Networking :: Setting Up Bluetooth Connection Between Two Computers Throws Connection Refused (111)

Apr 3, 2011

I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.

Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).

Any clues over here? I'm using pand 4.91 and blueman.

View 3 Replies View Related

Ubuntu Networking :: Wireless Network Connection Active But Still Not Internet Connection?

Jan 24, 2010

Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)

ubuadmin@ubucomputer:~$ ifconfig

wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....

View 5 Replies View Related

Ubuntu Networking :: SSH Connection - Router Works To Except Connection Requests

Jul 28, 2010

I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?

Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?

View 4 Replies View Related

Ubuntu Networking :: No Wireless Connection Despite Being Told Connection Active?

Jun 11, 2011

My problem is exactly the same as [URL]

but I am stuck at the last hurdle

here are the output of the command that helped to solve the case in the previous post:

ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0

[Code].....

I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet

View 1 Replies View Related

Fedora Networking :: 11 - Share My Internet Connection With Wireless Connection

Jun 21, 2009

I have installed Fedora 11 recently. I want to share my Internet connection.

I have e LAN connection eth0 which is connected to internet.

I have a Wireless connection wlan0.

I want to share my internet connection with wireless connection.

View 3 Replies View Related

Networking :: Connection Destroy Time With Net Filter Connection Tracking?

May 13, 2011

When I have video running and the video stops, I see that the connection is destroyed in about 5 seconds, which is what I want. If, rather than stopping the video, I pull the plug, I have seen it take 350 and 380 seconds before the connection is destroyed. Why is there such a large difference in the time to destroy a video connection between stopping the video and pulling the plug on it when using net filter connection tracking? How can I shorten the time for the connection to get destroyed when pulling the plug?

View 3 Replies View Related

Networking :: Use The Laptop With The Wireless Connection To Share The Internet Connection?

Feb 4, 2010

I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.

View 5 Replies View Related

Networking :: Setup PPPoE Connection To Establish DSL Connection?

Apr 23, 2010

I'm trying to setup PPPoE connection to establish my DSL connection, but I got

Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.

When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?

View 2 Replies View Related

Networking :: Openvpn Connection - Can Not Ping When Connection Established

May 8, 2010

I have problem in making connection to my vpn server I can make connection from windows xp to that but can not open any website and I can not ping 172.16.10.1 when connection established.

These are my configuration files:

server config file:

Quote:

client configuration file:

Quote:

And this is my server syslog tailed file:

Quote:

And I added this routing to /etc/rc.d:

Quote:

And this is my iptable:

Quote:

And vpn connection is lost after establishing a lot.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved