Networking :: OpenVPN Server And Netstat -tunp
Jan 8, 2010When the centos is running a vpn server, there 's a client connecting. The connection can't be seen by netstat -tunp
View 4 Replies
ADVERTISEMENT
Ubuntu Networking :: Netstat Shows Web Server Connecting To Itself?
Jul 14, 2011I've been experiencing some home web-server slowdown issues lately, and I wanted to see if it's a problem with the server itself. I'm not sure if this might be the problem, but upon checking netstat -tn, I see over 15 instances of the following:
[Code]...
where 192.168.2.9 is the server's local address, the local address port varies, and the foreign address is the server's web address. If anyone knows what might be causing this and/or how to fix i
Server :: OpenVPN Range Address / When Change Static IP To Dynamic IP In Config File OpenVPN Didn't Work?
Feb 13, 2010I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
Ubuntu Networking :: Network-manager-openvpn And Static-key OpenVPN Connection In 9.10
Apr 5, 2010i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
Networking :: Can't Connect To Openvpn Server
Mar 2, 2010i recently rent a VPS and installed with CENTOS 5 64bit, i followed a tutorial to install openVPN to bridge traffic to my windows machine.
View 3 Replies View RelatedFedora Networking :: OpenVPN Server Configuration On F14
Jun 16, 2011I have (seemingly regretfully) finally upgraded my Fedora Core 7 linux machine that has served me so well for the past decade. One of the final pieces to put in place was my Openvpn config (which was running flawlessly on my FC7) which I cannot get to work.
Here are my steps.
1. Disabled SELinux
2. Added the following entry in my iptables: (although I've stopped iptables to help troubleshoot)
-A INPUT -i tap0 -j ACCEPT
-A INPUT -i br0 -j ACCEPT
-A FORWARD -i br0 -j ACCEPT
3. Yum installed openvpn and bridge-utils (btw I'm using bridging)
4. Configured my bridge-start script as such:
#!/bin/bash
# Set up Ethernet bridge on Linux
# Requires: bridge-utils
# Define Bridge Interface
br="br0" .....
5. Configured my openvpn server conf as such:
proto tcp-server
port 5990
dev tap0 .....
When I execute my bridge-start script it creates the br0 and tap0 then all connectivity vanishes (I can only ping my gateway 10.0.0.50) - internet and any other addresses time out.
Ubuntu Networking :: Get An OpenVPN Server Running?
Sep 6, 2010Followed this guide to the letter:[URL]..
Tried to run command:
sudo /etc/init.d/openvpn restart
And just get a fail returned.
This is what the log-file says.
[Code]...
It says init bridge br0 does not exist. Do I need to create it in the network config or something?
Networking :: OpenVPN - Establish VPN Between A Client And Server On The Same LAN
Feb 4, 2010Running Linux Fedora 10 on an Intel Core 2 Duo PC. Runs great. We are trying establish VPN between a client and server on the same LAN. The network is a standard fast ethernet, run great. We are trying to install OpenVPN server, but having a little difficulty. Key and certificate builds seem to execute without a problem. But when we try to start the service we get [FAILED]. I've attached a copy of our procedure.
View 1 Replies View RelatedFedora Networking :: F-12 Openvpn Server Does Not Start At Boot
Nov 23, 2009This was working and stable on f-10 and f-11. Fresh f-12 install including openvpn, Copied /etc/openvpn/* to new system as root from working f-11 syatem. /etc/init.d/openvpn start (and stop) works as advertised HOWEVER when set to start at boot using chkconfig or Services Configuration program, openvpn does not start. I must manually start it every time. When started, it does work without error messages in the log.
I tried removing the NetworkManager-vpn module with no effect. Thought it could somehow be overriding the auto startup of openvpn at boot.
Ubuntu Networking :: OpenVPN On 10.04 Server - Routes Fail
Jul 18, 2010New ubuntu desktop user here. I've been working with Ubuntu servers for over 3 yrs, using Windows as clients. I have OpenVPN running on an ubuntu 10.04 server, and it has worked well with Windows OpenVPN clients connecting. I took those same settings and applied them to this new install of Ubuntu 10.04 Desktop, and now openvpn seems to be failing when we get to the routes (I wrestled with the network-manager "secrets" issue for hours, but that works now).
I performed the following:
sudo openvpn --config fogbank-ny1.ovpn
--all is well, we're connecting/yay then *screech* FAIL--
Code:
Sun Jul 18 07:17:14 2010 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.0 255.255.255.0,redirect-gateway def1,dhcp-option DNS 10.8.0.1,route 10.8.0.0 255.255.255.0,topology net30,ping 30,ping-restart 600,ifconfig 10.8.0.10 10.8.0.9'
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: timers and/or timeouts modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: --ifconfig/up options modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: route options modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sun Jul 18 07:17:14 2010 ROUTE default_gateway=192.168.10.1
Sun Jul 18 07:17:14 2010 TUN/TAP device tun0 opened
Sun Jul 18 07:17:14 2010 TUN/TAP TX queue length set to 100
Sun Jul 18 07:17:14 2010 /sbin/ifconfig tun0 10.8.0.10 pointopoint 10.8.0.9 mtu 1500
Sun Jul 18 07:17:14 2010 /sbin/route add -net <mypublicip> netmask 255.255.255.255 gw 192.168.10.1
Sun Jul 18 07:17:14 2010 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.9
SIOCADDRT: File exists
Sun Jul 18 07:17:14 2010 ERROR: Linux route add command failed: external program exited with error status: 7
Sun Jul 18 07:17:14 2010 Initialization Sequence Completed
I am using the suggested openvpn routes. If I connect from Windows (actually the .ovpn file is taken directly from the working windows machine).. all is well, routes work fine all traffic is routed thru the VPN -- same way it's worked for over a yar. I assume that this is what is causing networkmanager to fail as well. those logs indicate that it has connected to the vpn, but is probably stopping when it gets to routes.
Ubuntu Networking :: OpenVPN Server And Client At Same Time?
Oct 26, 2010I have an Ubuntu server that is currently running Ubuntu 8.10. I was thinking of making it a VPN server for my iPhone and also for my laptop whenever I'm outside and need to access internet over insecure wireless networks. Now that part should be easy I found several guides on how to configure OpenVPN server, as well as enabling clients on iPhone, and OSX.
However, the things is that my server is currently a OpenVPN client also, I have a paid tunnel set up to bypass my ISP blocking incoming traffic on various ports. Is it possible to keep this setting but still enabling a VPN server? Essentially causing traffic from my external device to go in through my tunnel to the VPN server, and then out through the external VPN provider.
Ubuntu Networking :: Autostart Openvpn Server At Boot?
Oct 30, 2010I configured succesfully openvpn server, but the service won't start at boot !I thought openvpn automatically starts al the *.conf files in the /etc/openvpn folder ?on my personal laptop the service automatically starts all the .conf files in the folder. But on my server with server.conf file it won't start at boot. I have to start the service as root
View 1 Replies View RelatedUbuntu Networking :: OpenVPN Routed And Bridged On The Same Server?
Mar 10, 2011I currently have one of our clients set up to use a routed VPN for their 5 laptops to connect to the server remotley. And this works brilliantly. They are about to bring on a remote office that will need a VPN connection back to the main office, so I was going to set up a bridged connection between the two sites (and possibly more sites in the future).
So my question is whats the best way to go about this? Can I have one instance of OpenVPN running with tun0 set up for a routed connection to the laptops and add a second tun (tun1) to the config that will be for the bridged connection between the sites? Or am I going to have to run multiple instances of OpenVNP, one for the routed and another for the bridged?
If routed and bridged have to run in seperate instances, will I have to add another instance for each new remote site that needs a connection? Can a bridged config connect to multiple sites, or have multiple tuns in the one config?
Networking :: Setting Up A VPN With OpenVPN On A Debian Lenny Server?
Sep 9, 2010I'm setting up a VPN with openVPN on a debian lenny server. I successfully installed it in the server, then created the certificates and both client (winXP) and server config files. For the client I use openVPN gui. I tested the tunnel and everything went just fine. I even can ping the openVPN server from the XP client.But thats all. I can't ping any machine behind the openvpn server.Some facts that you may find useful to help me with this issue are:
- The openVPN server is not the default gateway of the LAN. The dg is a pfsense server
- I dont have iptables enabled (policy of all chains are ACCEPT).
- I have configured ip forwarding (echo "1" >/proc/sys/net/ipv4/ip_forward)
[code]....
I have checked and all seems to be OK. I think that the problem is connected with routing the traffic from the vpn to my LAN but I don't know how to do that (besides the push route line in the server.conf).
Ubuntu Networking :: Connect OpenVPN Server Using Shell Command?
Feb 15, 2010I'm trying to connect OpenVPN server using shell command.
I've installed all needed packages (I guess)
if type
Code:
sudo openvpn client.ovpn
and i've got messages:
Code:
Mon Feb 15 12:29:25 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
[Code]....
but i can't see tap0 interface and cannot ping any address at remote location.
I tried this config file at Windows OpenVPN client and all works fine.
Ubuntu Networking :: OpenVPN Server Up And Running But Clients Can't Connect
Sep 28, 2010I've been the las 4 days setting up my first VPN (OpenVPN bridged). The server is up and running OK but when I try to connect I've got this message in the client log.
Quote:
TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
TLS Error: TLS handshake failed
[Code].....
Ubuntu Networking :: OpenVPN Server With Nm-managed Wifi Uplink?
Feb 7, 2011I'm attempting to set up a VPN server on my box using the nifty HowTo posted here: [URL]
My setup is as follows:wifi0 --> Internet; managed entirely via nm-applet (NetworkManager)
Where I'm running into trouble is in the creation of a bridge interface (br0) to bridge future VPN clients to my local network.
The guide(s) say that I need to screw around in /etc/network/interfaces to setup br0 and [eth0/wifi0] accordingly. The problem is that when I specify a configuration of any sort for wifi0 (my only choice for a network uplink), it disables nm and I am unable to configure my wifi in any sort of sane way after reboot... Further info: this "server" doesn't move, and always always connects to the same wifi hotspot that is also nailed in place.
Networking :: Login Multiple Client Pc On Using Via Openvpn Server From That Side?
Nov 24, 2010How to login multiple client pc on the same network using via openvpn server from client side
View 1 Replies View RelatedNetworking :: Openvpn Server Configured And Users Are Using From Remote Location?
Dec 18, 2010I have a openvpn server configured and users are using from remote location. I got some errors in the /var/log/messages file as:PHP Code:
Dec 18 16:09:37system openvpn[7221]: x.x.x.x:58983 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Dec 18 16:09:37 system openvpn[7221]: x.x.x.x:58983 TLS Error: TLS handshake fai
[code]....
Networking :: OpenVPN - Can't Ping From Server To Client Side Hosts / Make It Possible?
Mar 20, 2009Code...
What I can ping
Host A -> Host B
Host B -> Host A
Host A -> Router B
Host B -> Router A
Host A -> OpenVPN B
Host B -> OpenVPN A
VPN Server -> VPN Client
VPN Client -> VPN Server
What I can't ping
VPN Server to any client side host local address
VPN Client to any server side host local address
I have searched and searched for this but can not find any answers. Why can I not ping Host B from my OpenVPN server?
Server :: Netstat Has Tones Of Localhosts Connections?
Apr 15, 2010My new box has gotten laggy as all get out.I did a netstat just for the heck of it and:
Code:
0 0 localhost.localdoma:ipp localhost.localdo:47567 TIME_WAIT -
tcp 0 0 localhost.localdoma:ipp localhost.localdo:47557 TIME_WAIT
[code]...
Networking :: OpenVPN Repeats Message: TEST ROUTES: 0/0 Succeeded Len=1 Ret=0 A=0 U/d=down - Connect To Server
Jun 7, 2011I try to connect to my server (whose IP is x.x.x.x below) from my laptop. I have no idea why openvpn client won't work this time. It works fine in win7 before. I re-installed openvpn but it doesn't work neither. Then I searched for this issue, find that it is possibly caused by disabled DHCP Client service. I checked, and found it was enabled. Still won't work after restarting dhcp client service.
Basic Info:
OS: Windows 7
OpenVPN client: openvpn-2.2.0
DHCP Client Service started.
The following is the log during connecting:
Code:
Wed Jun 08 01:55:16 2011 OpenVPN 2.2.0 Win32-MSVC++ [SSL] [LZO2] built on Apr 26 2011
Wed Jun 08 01:55:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Wed Jun 08 01:55:16 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Wed Jun 08 01:55:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
[Code]....
Networking :: Netstat - Dropped Packets Under IP
Feb 13, 2009I have question regarding netstat? When performing a "netstat -s" I receive the following information regarding dropped packets under IP:
IP:
93978695 total packets received
0 forwarded
0 incoming packets discarded
79472157 incoming packets delivered
65235033 requests sent out
29527 outgoing packets dropped
However if I run a "netstat -i" I have no dropped packets whatsoever: (apologies for the table format):
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
bond0 1500 0 34326528 0 0 0 72755307 0 0 0 BMmRU
bond0:1 1500 0 - no statistics available - BMmRU
bond1 1500 0 28605491 0 0 0 20948952 0 0 0 BMmRU
eth0 1500 0 34199550 0 0 0 72755278 0 0 0 BMsRU
eth1 1500 0 126978 0 0 0 29 0 0 0 BMsRU
eth2 1500 0 97911 0 0 0 1 0 0 0 BMsRU
eth3 1500 0 28507580 0 0 0 20948951 0 0 0 BMsRU
lo 16436 0 34094225 0 0 0 34094225 0 0 0 LRU
Networking :: Understanding Netstat TCP Port
Aug 1, 2011I have an application that uses port 8080 all the time. One time, for some reason, it was taken by I didn't know what.
View 2 Replies View RelatedNetworking :: Set A Route For Eth1 - DHCP Clients - To Reach Tun0 - Openvpn Server - CentOS
Sep 21, 2010I have openvpn tunnel setup between two CentOS servers. One of the CentOS servers also acts as a DHCP server for some client computers.
Server A= OpenVPN server
Server B= OpenVPN client (connects to Server A with OpenVPN)
The two CentOS servers can ping each other (172.16.0.0/24) via the tun0.
However, client computer connected to Server B (DHCP server) can't reach 172.16.0.1 (which is the OpenVPN server).
I think I am missing some routing in my "ip route show". Following is the full picture:
What command can I issue to get this fixed? something along ip route add?
There is no firewall service on both end. service iptables stop! I can't bridge eth1 and tun0 as DHCP server might mess up the other side. I can't do a push of "redirect-gateway def1" because then clients loose their IP as they send DHCP requests to Server A.
Networking :: Netstat Displaying Wrong Process Name/id?
Feb 9, 2010While running some live tests last week I saw an odd situation where netstat appeared to be displaying the wrong PID and process name for TCP connections. I'm trying to figure out if this is just a strange netstat bug or if it could indicate something odd is happening with our software.
We have a main program which establishes a number of connections, including connecting to a JMS server and listening/accepting a TCP connection. The main program also creates a child process which it uses to communicate with another server. On at least three occasions we saw a situation we saw netstat reporting all the expected TCP connections (correct ip/port for both source and destination), however the child process, instead of the main, was listed for the PID. The main process was still running but netstat no longer reported any TCP connections established by the main program. The main program continued to function correctly, the JMS communication continued to work and we believe the other TCP connection was functioning correctly despite the program supposedly not having any TCP connections.
I'm wondering if this could simply be a bug and/or obscure functionality of netstat that I don't understand which would cause netstat to report the child process as 'owning' the parents TCP connections. I don't know how this would happen or why the parent would continue functioning despite the problem otherwise.
Networking :: Netstat Command - No Support For IP Masquerade
Nov 23, 2009While issuing the command netstat -M it shows netstat: no support for `ip_masquerade' on this system. But this system is used as a gateway and iptable rules are set for ip forwarding. Also internet is getting another machine through this machine. What about the message?
View 3 Replies View RelatedNetworking :: Netstat Port State IDLE
Jun 8, 2011with netstat i found a port with idle state, i google the meaning of IDLE:Idle, opened but not bound.What do you mean by bound?
View 2 Replies View RelatedNetworking :: Using Netstat Command - 54406 Established?
Dec 1, 2010I just found something "strange" by using netstat
tcp 0 0 myhost.deprecated:53719 amaretti.chimfar.:54406 ESTABLISHED
How can I check what is the program that is responsible for this line?
Ubuntu Networking :: Port Open In Iptables But Nothing In Netstat?
May 16, 2011I need the port 27015 to be open. I've opened it in iptables :
Quote:
iptables -A INPUT -p tcp -i eth0 --dport 27015 -j
But when i try :
Quote:
netstat -nan
The port 27015 do not appear as "LISTEN".