Ubuntu Networking :: "NetworkManager Is Not Running..." And Can't Restart It?
Sep 13, 2010
Approximately two days ago my nm-applet changed from the up & down arrows to a wireless graphic with a red exclamation point. I lost my network connection. I was playing a video game at the time. I did not install any applications, change the network settings, have any non-included crons executing, run update-manager manually, or reboot my machine within the past 24 hours of this happening.I completely removed network-manager & gnome-network-manager via Synaptic, configured my /etc/network/interfaces file properly, and rebooted. I have my network connection working via the interfaces file.
Then, I found every file I could that mentioned "NetworkManager" and deleted them.I re-installed network-manager and rebooted.e deleted files were re-created upon rebootMy network connection was working because of the /etc/network/interfaces etworkManager was not and nm-applet was showing the wireless icon with the red exclamation point.I have been trying to figure out what happened to NetworkManager. When I click on nm-applet, it says "NetworkManager is not running..." I tried to restart network-manager with the following commands and their respective errors:
Code:
xk@localhost:~$ sudo stop network-manager
stop: Unknown instance:
[code]....
View 2 Replies
ADVERTISEMENT
May 20, 2010
I'm using version 10.04 of Ubuntu and for some reason, when I install a copy of Ubuntu or Ubuntu Server, I get a 'NetworkManager is not running' message in the notification bar where the network icon should be.What could be causing this? This is happening as soon as I finish installing the OS and I've not changed anything at all.I've been wrestling with this for weeks, trying different commands and trying different ways of setting up the OS to begin with, scouring the internet for answers, but nothing
View 2 Replies
View Related
Nov 23, 2009
Every time KDE starts, it pops up a message saying that 'another network manager is running', how can I prevent NetworkManager from starting?
View 3 Replies
View Related
Jan 12, 2010
Just installed OpenSUSE 11.2 and I have to say it feels great.Only gripe I currently have is the NetworkManager that is starting up very slowly. When I have logged into KDE KNetworkManager applet says that NetworkManager is not running and hence I have no network connection. This is fixed if I start NetworkManager (as root) or just wait a couple of minutes. I have one ethernet interface only, no wireless
View 4 Replies
View Related
Nov 24, 2010
I have triple monitors working on my 10.10 ubuntu system and they work for most things. Except k9copy and virtual box will cause x to restart. glxgears works fine.
xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" RightOf "Screen1"
Screen 1 "Screen1" 0 0
Screen 2 "Screen2" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection .....
View 5 Replies
View Related
May 15, 2011
I just completed a clean install and update of Fedora 14 on a Dell Precision 490 (4G of RAM, Dual Xeon 5140 CPUs).The system has all of the current updates applied and seems to be running normally, but it will not complete a shutdown/poweroff or restart. It gets hung with Restarting... in the upper left corner of the screen and stays there until I force the system to power down.I have searched quite a bit for related problems but have come up empty. Its kind of hard to debug because the system does not respond when it is in this hung state and there does not appear to be any relevant info in /var/log that I can find.
View 3 Replies
View Related
Aug 24, 2010
that If I am fire a crontab which is running myScriptThe crontab is runningNow if I change the source code of myScriptDo I need to restart the crontab, to take into effect mychanges Ie I want in the existing crontab to take my updated script
View 2 Replies
View Related
Sep 23, 2010
How to setup vncserver and keep it running in the background after restart on Lenny workstation? The admin should be able to connect every time via vncviewer to this workstation.
View 2 Replies
View Related
Feb 21, 2010
I've set-up a Linksys WPC54G v5 wireless card using ndiswrapper and the appropriate Marvell driver. It seems to work ok. On my other laptop running Kubuntu with built-in wireless the routing all works fine - I just get prompted by Network Manager for the WPA passphrase and I'm away. However, when I try to connect to my wireless router on thix Xubuntu-based laptop I get really odd security options.
When I try to connect I get a security prompt asking me for a bewildering array of information. There are four basic authentication options under "WPA & WPA2 Enterprise": TLS, LEAP, Tunnelled TLS and Protected EAP. None of those offers a simple passphrase, they all have some combination of username & password with certificates and keys. If I try to connect to other networks in my area, some do just ask for a WPA passphrase, not that I know them to check!
View 1 Replies
View Related
Apr 24, 2010
I have problems with my Broadcom BCM4306 (rev 03) on my HP nx6110ng Karmic.NetworkManager does not list any AP, even if there should be some. It did work for some days without problems, but suddenly stopped working. I made a kernel update with the update manager, but I am not sure if this caused the probem (I also used the wired connection, so I don't exaclty know when wireless stopped working). Reinstalling fwcutter wasn't successful. So I tried as suggested in https://help.ubuntu.com/community/Wi...oadcom_BCM4306 and added the following lines to /etc/rc.local
modprobe -r b43 b44 ssb
modprobe ieee80211_crypt_tkip
modprobe b44
[code]...
View 1 Replies
View Related
May 12, 2010
when i unload and reload my module ath5k, something is setting my wireless interface in managed mode. I suspect is NetworkManager but when i try to kill this process (using -9 parameter) it restarts. how to kill it or which process is starting it over and over again?
View 1 Replies
View Related
May 27, 2010
Using kubuntu 10.04, I accidentally disabled networkmanager on startup for one of the users of my system. This user now has to manually start networkmanager each time after logging in. How can I make kde run networkmanager automatically again?How this happened: when I started a parallel session as an other user, while already connected via networkmanager in my own profile, kde detected this and asked something along the lines of "There's already a networkmanager running, run networkmanager automatically in the future?" Since I was a little confused, I clicked "no", and that's how things are ever since. I thought there would be some system setting that would allow me to restore this setting, but I haven't found it yet...
View 2 Replies
View Related
Dec 28, 2010
Is there a way of wireless networking without using the Gnome NetworkManager Applet? I want to connect to the Internet using a USB 3G modem and connect to wifi without knowing all of the details of every network.Network manager is pretty good but there seems to be no way of using it without starting an X session and it doesn't play nice with any other networking tool and reminds me too much of a Microsoft application.
View 4 Replies
View Related
Jan 18, 2011
I've simple PPTP connection in NetworkManager that is build in with ubuntu, once I disconnect the connection [to change IP or so] the connection won't establish again...
I'm getting a libnotify popup that says "Connection failed because timeout"
I'm getting a good IP, I just can't connect again after 1 disconnect...
Any idea why?
View 1 Replies
View Related
Jun 4, 2011
I installed 10.10 and ran it for a few weeks and then (foolishly) installed Wicd and tried it and it failed. So I had no network connection. Can I re-install NetworkManager from the 10.10 CD? Or is there something else I can try in order to restore wifi access?
View 1 Replies
View Related
May 27, 2010
i use networkmanager 0.7 shipped with CENTOS 5.4
The resolv.conf is not written correctly every time i reboot the machine...it seems to ignore all sysconfig configurations !
this is the resoult resolv.conf after every reboot
# Generated by NetworkManager
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
[Code]....
View 7 Replies
View Related
Feb 7, 2010
I'm running ubuntu 9.10 with the latest networkmanager (from ppa)I thought this could be wrong credentials setting, so i've tried a huge amount of setups (user: phonenumber, password: phonenumber, avp:telenor, seems to be the general consensus for how it should be)Is there something I'm missing or is there any way I could tail the output as NetworkManager tries to connect (hopefully seeing something like "wrong password" etc.)
View 6 Replies
View Related
Feb 7, 2010
When I start a Kubuntu session, KNetworkManager requires that I type my password to the Wallet before it has permission to connect to the internet. How can I automatically give it permission without entering my password every time?
View 2 Replies
View Related
Mar 17, 2010
What I currently do is run this script -
Code:
rfcomm release 0
CHANNEL = `sdptool search --bdaddr=00:21:FE:A5:C9:4A dun | grep Channel | cut -c14`
rfcomm bind 0 00:21:FE:A5:C9:4A ${CHANNEL}
wvdial e71bt
And my /etc/wvdial.conf is configured for AT&T connection here in the US.
Question is, is there anyway I can integrate it with NetworkManager, instead of having to run this script?
There's a "Broadband" option on NetworkManager, but I am not able to get it to recognize my cell phone as a modem. The bluetooth applet only allows for file transfer
View 3 Replies
View Related
May 10, 2010
Is there any easy way to replace the default Gnome NetworkManager used by Ubuntu with Mandriva Net-Applet? Although I prefer Ubuntu, overall, I have had better luck with video streaming, browser speed, and consistency when using Mandriva (with iPV6 disabled).
View 2 Replies
View Related
Jun 2, 2010
I have a tenda W311u wireless with a ra3070sta chipset, i read a lot of tutorials to get it working. I recently had my wireless working but just in NetworkManager. I need to get working in console mode, for example when i make a:
Note: The Essid the same i added in the RT2870sta.dat file.
And therefore if i try a dhclient3 ra0 no dhcp offers received.
Rare, but if i start NetworkManager connected to azcor, and i make a dhclient3 ra0 i get an ip very fast.
I try with cnetworkmanager but is complicated and isnt working for me!
View 6 Replies
View Related
Jan 16, 2011
I got it set up in the NetworkManager applet (imported the client.ovpn), but when I connect it sends ALL my traffic through the VPN. I would prefer all accesses to the internet go over my normal default gateway, rather then all the way through to the VPN's default gateway.When I connect through the command line:
Code:
openvpn --config client.ovpn
I don't have this problem, and accesses to the internet still go over my default gateway on
[code]...
View 1 Replies
View Related
Jun 28, 2011
Suddenly my wireless card isn't coming up automatically.The following sequence fixes it:
Code:
ifconfig eth1-eth0 up
killall NetworkManager
[code]....
View 2 Replies
View Related
Nov 25, 2009
I have no problems seeing the networks available and connecting to a network in KDE. But there is no network manager in GNOME. I might have messed up with the settings earlier. What I can do though is run knetwork manager every time I start up (or add it to start up programs). But that opens up the KDE wallet which would rather avoid.I am thinking I need to install something related to NetowrkManager.
View 2 Replies
View Related
Feb 20, 2011
if the NetworkManager uses wpa_supplicant? I normally dont use NetworkManager and decided to try it. I started it and tried it out and it works with WEP and WPA! I cant figure out why using the iwconfig command is not working by itself for WEP. WPA working with NetworkManager is just a bonus though.
View 4 Replies
View Related
Jun 25, 2011
I'm an inordinate amount of trouble getting F15 to run without NetworkManager. If I boot with the NetworkManager service enabled, my NIC presents as expected at /dev/eth0 (I'm using biosdevname=0). However, when I stop the NetworkManager service, /dev/eth0 disappears from the filesystem.If I boot without NetworkManager enabled, /dev/eth0 is never created. Reviewing dmesg, udev is loading an ethernet driver.
View 1 Replies
View Related
Dec 9, 2009
I'm using CentOS 5.4. I want to set-up a PPTP connection (I'm the client). I installed the NM pptp plugin from EPEL's repository. I have configured my PPTP connection in the NetworkManager applet but now I don't know how to connect to the server, I mean, there's nothing like 'Connect now'.
View 1 Replies
View Related
Jan 23, 2010
My networking seems to be OK but when any changes are made the NetworkManager Applet 0.7.996 (I think) in the panel pops up a small window ~ 300*80 pixels which displays some faint coloured lines and dotted lines where, presumably, there should be a message of some form. How can I configure it to get the message?
View 1 Replies
View Related
May 6, 2010
set the number of retries networkmanager attempts to connect to a network to infinity?
I live in an area of Australia were wired internet dare not tread (or so say the ISPs). My only real choice is 3G wireless broadband, and even that is iffy at times. Often late at night the network towers do "something" (reset, maintenance, etc. - no idea) and the internet drops out, networkmanager tries to reconnect, fails, tries again, (etc. etc.) until it ultimately gives up, requiring human intervention when the towers are done with whatever it is they are doing. This happens frequently, and I'd like to have networkmanager keep trying "forever" until it connects so I don't have to restart the connection each morning.
Where would such a thing be set? How does networkmanager know when to give up?
View 5 Replies
View Related
Jul 27, 2010
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
View 2 Replies
View Related