Ubuntu Networking :: Netis WF-2103 Wireless Installation
Dec 23, 2010I recently acquired several netis WF-2103 150mbps Wireless-N USB Adapters. I googled all over the net and was unable to find anything on installing them.
View 2 Replies
ADVERTISEMENT
Ubuntu Networking :: Wireless - Lost It - 'wmaster0 No Wireless Extensions', But Then Refers To Wlan0 As The Wireless Connection
Mar 28, 2010A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
Ubuntu Networking :: Wireless On New Installation - Connect To The Internet
Feb 5, 2011I've just installed Ubuntu. My house isn't wired so I use wireless on all my machines to connect to the internet. When I start up Ubuntu, I can connect to my wireless router. After about 3 minutes, I get disconnected. It refuses to reconnect for several minutes. If I disable and reenable networking, I can establish a connection again, but the process is repeated. I'm not really sure what the issue is here. Any guesses? This is a desktop and I'm using a Belkin wireless adapter.
[Code]....
Ubuntu Networking :: Doesn't Recognize Any Wireless Networks After First Installation
Apr 4, 2011I recently installed ubuntu 10 on my Compaq mini 730ej. I installed it using the wubi software. Although it works fine with regular lAN connection, it doesn't recognize any wireless networks - when I click the icon I see a "missing firmware" massage. Now - I am a linux newbie, so be gentle, but I would very much like to solve this problem since.So what can I do?
View 9 Replies View RelatedUbuntu Networking :: RT5370 STA USB Wireless Adapter Driver Installation
Jul 8, 2011I am also trying to install a wireless driver, but mine is for the Ralink 5370 USB wireless adapter. Do you have some patches for that driver, and could you show me how to install the driver?
View 9 Replies View RelatedUbuntu Networking :: Install Wireless-tools From A Command Line Installation?
Jan 7, 2010I did a command-line installation. I dont have an ethernet connection, only wireless. For some reason the alternate installer doesnt install "wireless-tools" How do i install it? At this point I am thinking of booting off a live USB, downloading the wireless-tolls package from here Save it to a folder in the command line installation where?) then boot back into command line and install from there But I am not that savvy with command lines, and dont know where to install to...
View 1 Replies View RelatedUbuntu Networking :: RaLink RT2561/RT61 Wireless Card Installation?
Sep 13, 2010I'm having trouble installing my RaLink RT2561/RT61 wireless card. It seems that this driver causes problems for all ubuntu users, and I've tried a couple of work arounds, none of which work for me.
Firstly I downloaded the most recent driver from here: [URL]...RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661) is the driver I downloaded. Next I performed the following steps:
Code:
robinsjp@home-desktop:~$ sudo apt-get install linux-headers-`uname -r` build-essential gcc
Reading package lists... Done
Building dependency tree
[Code]...
Fedora Networking :: Wireless Dont Connect After Installation?
Jul 24, 2009I tried Fedora 11 Live CD and if finds and I am able to connect to my wireless network imediately. But now when I have installed Fedora to the hard drive, I can see the wireless network, but when I press connect, it starts connecting, both dots become green but then it just says "Disconnected, the wireless network has been disconnected"
View 1 Replies View RelatedUbuntu Networking :: Connecting To Unencrypted Wireless Network From Command Line Installation
Jan 8, 2010I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
View 1 Replies View RelatedNetworking :: Wireless Network After Installation Of Mobile Broadband Dongle
Jun 28, 2011I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
Ubuntu Networking :: Broadcom Wireless - Wired Network Card Has Died On Me Prior To Installation
Sep 12, 2010I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
View 5 Replies View RelatedFedora Installation :: Live User On Asus EeePC - No Wireless Networking?
Mar 12, 2011On a new ASUS eee PC 1015P, the Windows 7 o/s supplied works fine. Experimenting with a Fedora 14 Linux o/s, currently just booting to a Live User system on a USB Stick, there is no wireless networking. In case it is relevant, the wireless LAN Card details (as reported from lspci) are: Ralink RT3090 802.11n 1T/1R Wireless LAN Card Driver Version 3.1.6.1 Should I be expecting wireless to be working on the USB version, do I need to do a full install to get wireless or is it maybe a drivers problem?
View 3 Replies View RelatedUbuntu Installation :: Upgrade To 10.04 Leads To Loss Of Correct Screen Resolution / Wireless Networking / Sound
May 4, 2010Excited at seeing the new features in 10.04, I clicked the Upgrade button tonight. I am now really regretting it! Problems:
1. My screen resolution should be 1280x1024 but the System>Preferences>Monitors control panel only shows 1024x768.
I think I have onboard Realtek graphics. Do I need to install proprietary drivers? Everything worked fine out of the box with 9.10!
2. The sound isn't working. Again I think I have onboard Realtek sound, and again it used to work fine without any intervention from me...
3. Although on first startup wireless networking was working fine, I restarted to see if that would solve the display issue, and wireless networking stopped working too!
I have an RaLink wireless card.
When I used Grub to choose 2.6.31.20, I got some error messages at startup (e.g. mount couldn't mount /dev), but then it did eventually start up and the sound and wireless networking are working again. But the resolution is still not fixed. It is now offering 1152x864, which it didn't previously, but no 1280x1024 (my screen's native resolution).
CentOS 5 Networking :: Wireless Intersil Prism 2 Driver Installation Didn't Work?
Dec 20, 2010I am a linux newbie, I spent more than 3 days trying to set up the drivers for my Intersil Prism 2 Wi-Fi adapter on CentOS 5.5. While trying to Make the driver source I receive errors of missing libraries. Is the hostap driver included in the Centos Kernel? I tried with insmod hostap but it didn't work..? Is there a kernel patch with the hostap drivers? I will be glad if someone can give me ideas or directions for setting up the driver properly.
View 1 Replies View RelatedUbuntu Networking :: Wireless Don't Work On Wireless 1390 WLAN Mini-card
Mar 30, 2010I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedUbuntu Networking :: Wireless The Trial Mode Is Working Great, But The Wireless Will Not Work?
Jul 21, 2010I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies View RelatedUbuntu Networking :: Get Wireless Network Adapter To Be Read By 'Windows Wireless Drivers'
Nov 24, 2010I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
Ubuntu Networking :: No Wireless After Installing Ndiswrapper T61 With Intel 4965AGN Wireless Card
Dec 31, 2010I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
Ubuntu Networking :: Broadcom Wireless No Longer Recognizes Wireless Networks?
Jan 11, 2010I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
Ubuntu Networking :: 'Wireless Is Disabled' Using RealTek RTL8187 Wireless USB Adapter
May 25, 2010I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
Ubuntu Networking :: Typical Speed From Wireless To Wireless Computer On 802.11g Home?
Jun 14, 2010I am having trouble with my home network, from one computer to another both using wireless g (Ubuntu 10.04) what transfer rate should I expect/hope for when copying a file from one computer to another? My speed is consistently 220 KBps am I correct in assuming this is pretty bad?
View 1 Replies View RelatedUbuntu Networking :: Wireless Unstable In 10.04 - AR5001 Wireless Network Adapter
Aug 30, 2010I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
Ubuntu Networking :: Wireless Script Is A Diagnostic Tool For Wireless - Connectivity
Apr 19, 2011As promised the finished (pretty much finished) wireless script can be downloaded here the wireless_script is a diagnostic tool for wireless issues. It will return all relevant information to help diagnose a wireless connectivity problem, return connectivity stats and attempt to fix common problems such as blocks. It comes in cli - wireless_script_1.2.sh or gui - wireless_script_zenity_1.2.sh'
Let me know any issues you have with it. My contact details are in the readme.txt (also the wireless results.txt generated by running the script includes code tags for forums - so please copy and paste the whole document when pasting on forums to enable this function)
Ubuntu Networking :: Wireless Card - WEP Encryption For Wireless Router Not Allow Me To Connect
May 5, 2011wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
Ubuntu Networking :: Pavilion Dv6 Wireless - Can't Find Local Wireless Networks
Jun 11, 2011For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedUbuntu Networking :: Wireless Card - No Longer To Connect To A Wireless Network
Jun 17, 2011The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedUbuntu Networking :: Wireless: Can't Associate With Access Point In Kde, Wireless In Gnome Works Fine?
Apr 30, 2010one of these "WiFi works in Gnome, not in KDE" threads, but I have been all over google and hundreds of threads across different sites and can't figure this one out.As mentioned, wireless is peachy in Gnome, unfortunately I like KDE and I'm more productive using it (when I have internet). Wired network works fine in KDE, and my network card
Code:
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1201
[code]....
Ubuntu Networking :: Tenda W322P Wireless Card Crashing Wireless Router On Connect
Jun 30, 2011I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
Ubuntu Networking :: Rename My Wireless Card From Eth1 To Wlan0 As Use Conkyrc And It Will Not Read Wireless Strength?
Aug 8, 2010have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies View RelatedUbuntu Networking :: Wireless Internet Drivers Cannot Get Wireless To Work?
Mar 20, 2010i installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
View 3 Replies View Related