Ubuntu Networking :: Multiple Keyring Logon Dialogues
Jan 21, 2011
I would happily do without having to logon to my wireless connection but, apparently, one can either have automatic logon at boot or automatic logon to the network - but not both.Anyway, of late my Ubuntu box has begun to request my network keyring password 2, 3 or 5 times (never 4, though). This was a real nuisance until I discovered that I can respond with my password on the first occasion and simply 'cancel' the subsequent requests.This is not critical but I would love to rid myself of the subsequent dialogue prompts.
View 5 Replies
ADVERTISEMENT
Apr 27, 2011
Although all the passwords are under one Keyring folder, I have to type in the password 4 times. Is this the way the keyring is supposed to work? If so, can I help change this somehow(I'm not a programmer, unfortunately)? It seems that a lot of people have this problem and getting it to work out-of-the-box could bring in more potential users. (Also, different topic, is there anyway to make Dropbox wait until I enter keyring passwords to try to connect or wait until a connection is made to try to connect?
View 1 Replies
View Related
Nov 9, 2010
It's been awhile since I've been on here. I suppose that can be considered a good thing, since I made the completely transfer to Ubuntu three months ago and everything's been running completely smoothly. Anyway, security is a pretty big thing to me. I usually change the root password, take sudo off (and default gksu, not gksudo), encrypt my hard drives, etc... One thing I also do is create a separate password for my login keyring. I don't mind having to enter one extra password at login, but it started prompting two times, and now three. It's the same password every time, so my question is..
View 4 Replies
View Related
Jan 26, 2010
Our system is based on RH4 and is using pam_tally and faillog to record failed attempts and to lock users out after 5 attempts. We have a requirement to provide a normal (non-root) user logging onto our system, with information regarding the number of failed logon attempts made on their account before the current successful logon (similar to the functionality provided by HP Protect Tools on Windows). My first idea was to add 'faillog -u $USER' to the bashrc, however by the time the bashrc is run - the user has been successfully authenticated and the faillog has been reset back to zero.
View 5 Replies
View Related
Jan 18, 2010
Is there a way to embed the user password in the following code?
Code:
rsync -r -n --progress --delete -u -l -e ssh 192.168.1.9:/Volumes/1TB_Internal/Music "/media/Storage/Libraries/My Music"
[code]...
View 4 Replies
View Related
Sep 5, 2010
I'm working in France right now. And my internet access is through a router on a local network (LAN) of the hotel in which I stay. In order to have internet access I must type in my room number, my name, check the agreement and then click Enter.The problem is that the router cuts off internet every two hours.What I need is some script that does the followings:
- detect if there is no more internet connection (the LAN connection stays on)
- if there isn't to run the script that does all those things above.
What I've managed to do is the script that puts room number, name, check the agreement and click Enter using DejaClick, making it a bookmark and then open the firefox and run the script.The command that I've used in Terminal and which I think I can use in my script was:
[URL]
It works well. It's connecting to the net.What remains is the detection of the cut off of the internet connection.
Tried with Wicd, going to the properties of the wireless connection and then on Script. here I'm stucked.Don't know what to do anymore.It has the post-disconnection script option, but my LAN connection is not disconnecting, only the Internet access through this LAN is disconnecting.
View 1 Replies
View Related
May 25, 2010
Since upgrading to 10.04 my network connection asks for key/password every time I logon. Where/how can I make ubuntu remember my key/password?
View 2 Replies
View Related
Nov 4, 2009
I would like to mount a bunch of folders/shares when I start my machine up. I will be adding the mounts into my /etc/fstab folder BUT my WLAN0 only comes "up" and connects to my WAP AFTER logging in.
how I get it to start on PC boot instead of log in?
I think I need to disable network manager but I'm unfamiliar with the procedure in Fedora
View 2 Replies
View Related
Jan 4, 2010
I just got a brand new usb wireless adapter. Plugged it in, picked it up but then a window came up and said "The application nm-applet wants to access the keyring. Please enter password." I entered my password, the window goes away for about 1 second, then comes back up again. With my old usb wireless adapter, it never did this.
View 3 Replies
View Related
Mar 25, 2010
I am getting a prompt namely unlock keyring when i start up my PC and when i type in my password my wireless gets connected automatically... I didnt have this issue before.. My wireless onnection used to start up automatically when i start my PC...
View 4 Replies
View Related
Mar 29, 2010
I have an issue with my wireless. I installed Ubuntu Karmic at the beginning of February and have had it connected via an Ethernet cable and everything worked. I am now trying to access the internet using the laptop's wireless the "Wireless Network Authentication Required" window appears where I add my password for the network, then another window appears called "Unlock Keyring" where it says that the network manager applet requires the default keyring.
I put in my Ubuntu password (login and sudo one) and nothing happens, the window just appears again.
Is my default keyring different from my password, and how do I find out what it is/change it
View 1 Replies
View Related
Dec 20, 2010
New to forum and quite new to any linux distro, have played around a little with older Ubuntus, having spare desktop I thought it was time to see how things are developing with the latest release. 10.10, downloaded and cd made.
Installed without a hitch, picked up all the hardware even my Edimax 712g nic. entered wireless network details and was off. Enjoying the new look and feel of the OS surfing, mailing and connecting to my win 7 laptop for my music shares. We then had visitors round so shut down, and went back to it this morning, only to find that a couple of things had changed.
(1) no matter what I do (Followed several different suggestions found on here) and no matter how many times I check all the details, It will not connect, to the router just carries on seemingly without end trying; only broken by the requests for the security key of the router.
(2) the keyring password is not recognised.
I thought I may have done something I didn't realise, so I simply did a reinstall, everything exactly the same, and just replicate the problem I perfromed a restart; ending up with exactly the same result.
View 2 Replies
View Related
Sep 11, 2009
I just get F11 installed in my laptop, X60 IBM. I have trouble get to connect my wireless network. When I try to connect my router using network manager, it comes up with a screen call unlock keyring window and ask for password. Can somebody tell me where can I get the keyring password. I have try router password, root password and sudo password and it would not unlock. network manager show I have wireless set up and enable.
View 9 Replies
View Related
Apr 30, 2010
The only problem I am experiencing is that when I boot Ubuntu quickly finds my wireless network but does not automatically connect to it. A window then comes up asking me to "enter password for Keyring default". After having then entered this password the connection does take place and remain stable. So really no big deal but why do I need to do this every time I boot up. This is new to me. Never had anything like this on previous versions.
View 5 Replies
View Related
Apr 19, 2010
Well, first off I'd like to say that I am much happier with the wireless on Ubuntu 10.04 than I was on 8.10 (the last time I tried Ubuntu). However, there is a small annoyance I'd like to fix: every time I log in, I get a prompt saying that an application (the wireless network manager) is requesting the password for such-and-such keyring. I have to enter the password before I can connect to my network. Is there a way to get around this somehow so that I don't have to enter the keyring password for this keyring (the "default" keyring) every time I log in?
View 3 Replies
View Related
Apr 25, 2010
I am new to linux and ubuntu. I am using ubuntu Hardy Heron release 8.04 I have not used it in a long time and then when I did fire up the laptop. I get a message asking me to enter a password for keyring. The message is as follows; Unlock Keyring "The application 'Network Manager Applet' (/usr/bin/nm-applet) wants access tot he default keyring, but it is locked.' Password: _______________
Then I can Deny or OK it. How can I disable that and keep it from popping up. Also, it there a way to figure out/change the administrator password if you don't remember it as well?
View 2 Replies
View Related
May 16, 2010
I'm not sure if this is the correct section to ask this question, so mods please move if needed. This happens with a freshly installed Lucid 64 bit, 2.6.32-22-generic kernel. Each time I boot into the system I get prompted for my password: "Unlock Login Keyring
Enter password to unlock your login keyring The login keyring did not get unlocked when you logged into your computer." At first I thought it was the wireless network problem, so I already checked my wireless as "Available to all users", but this didn't stop the prompt. Doing a little bit more of research, if I cancel the dialog without entering my password, I can access the web without any problems (so again it is not the wireless connection problem), but then if I try to launch Gwibber I get the prompt again (two times actually, if I press Cancel the first time), or if I launch Empathy as well (three times in a row if I press Cancel; probably it has to do with the fact that I'm logged into 3 different accounts, facebook, gmail and hotmail?).
Furthermore, this two nice pieces of sofware offer almost zero configuration options to the user, at least GUI-wise, so there is no checkbox for "Available to all users" or anything simmilar for the matter. For instance, in gwibber I have spell-check turned on by default and there is no way to turn it off. So I guess I'll have to tweak some configuration file in some obscure folder,
View 8 Replies
View Related
Oct 10, 2010
I just did a fresh install of 10.10 and whenever I log on it request the password for default keyring (the same as sign in password) in previous versions of ubuntu it never asked and automatically started the wireless; now it asks and tells me the password is incorrect. I can hit cancel a numerous amount of times and it will eventually allow me to connect, but that doesn't seem like a good fix in my opinion. This also happened when I tried out lubuntu 10.04 which I promptly removed due to the menu style.
View 5 Replies
View Related
May 20, 2010
I have an old pentium 3 computer that has ~7 NICs installed. These NICs are attached to modems and other networking equipment. According to the linux ping page on computerhope.com, it seems that one could send a ping from a certain specified NIC. How would one go about this?
View 6 Replies
View Related
Jun 16, 2009
I have a CentOS 5.3 box with three network interfaces in it. Each interface is attached to a separate VLAN and I want traffic to stay on each network segment.What I can�t figure out is why I cannot get each interface to have its own gateway and everything gets sent through the default gateway.The basically takes my possible 3Gb total bandwidth and throws it down a single 1Gb pipe.Then on top of that, if I take down the interface (ifdown) that has the current default gateway,I loose contact to the other two interfaces.When I look at the routes, each one of the interfaces shows the gw as 0.0.0.0 and defers to the default route. So I delete the route and try to add a new route with:
[root@testsan ~]# ip route add 10.1.15.0/24 via 10.1.15.1 dev eth2
but end up with the error:
RTNETLINK answers: Network is unreachable
[root@testsan sysconfig]# cat network
NETWORKING=yes
NETWORKING_IPV6=no[code].....
View 5 Replies
View Related
Apr 17, 2009
is there any way that i can save the default keyring password? each time i logon, it asks for the passwd and once i provide it, everything is all right. But it's kinda annoying.
View 5 Replies
View Related
Dec 15, 2010
Until this morning, my Wireless had always been working fine. This morning I rebooted after an Ubuntu update and now:
- I am asked twice for "enter password for keyring 'default' to unlock" whereas before I was always just asked once.
- The connection seems to be established, with the icon showing good reception and the tooltip reads "Wireless network connection 'mywifi' active: mywifi (100%)
BUT I can not connect to any website or ping the machines of my network, even by IP address. All of the other computers around (Mac, Windows) can use the Wireless as usual. My Wireless is WPA-PSK TKIP hidden SSID. My Ubuntu is 10.10 Maverick.
View 2 Replies
View Related
Apr 11, 2009
I have a FC10 installation with GNOME and NetworkManager and a wireless card. Everything works ok. However, when I try and setup gdm to do autologon I get the NetworkManager applet asking for the password for the gnome-keyring to get the wireless details. Since I want to use this machine as a sever this is unacceptable as I won't be around to type in the password. I tried the solution at [URL] but this does not work. I still get the password being requested and the keyring password is the same as the logon password. Can anyone say if there is a workaround that works to get the NetworkManager to be able to read the gnome keyring without having to prompt me for it.
View 5 Replies
View Related
Aug 4, 2010
I'm asking this in the right place. I'm using Ubuntu 10.04 LTS and recently started getting a pop-up similar to the following at every boot up: Login keyring failed Your login keyring did not succeed. Enter login keyring here: That's not [exactly] what it says, but very similar. I should probably add that I have not set up any different 'user profiles' or whatever they're called, but am the only one using this PC...at least, at the present time. Again, this only started a couple of weeks ago and I don't know what I did to start it nor what to do to stop it. I guess it's not extremely painful to have to type my password in every time, but a PITA nevertheless.
View 5 Replies
View Related
Jan 3, 2011
I have update my linux server from mandriva 9 to mandriva 2010
I was working using samba 2.2.8 and now I have samba 3.5.3.I have transfer all passwd and smbpasswd to new linux.I have convert smbpasswd to tdbsam
when i am using win xp to logon on samba domain the windows XP does not load profiles from samba. I think that the problem is NTUSER.DAT storing in /home/user/profile
The same profile is working using samba 2.2.8 but not working in samba 3.5.3..
View 1 Replies
View Related
Oct 20, 2010
In the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies
View Related
Jul 6, 2011
I have one router, a linksys. It allows wireless and wired connections, as is normal. I have two XP machinesby wire to the router and three linux machines connected wirelessly. The XP machines both have IP addresses beginning with 192.168. while my three linux machines have IP addresses that all begin with 172. None of the machines is connected with a static IP address. All are automatic DHCP.I am told that the above scenario makes no sense. However, such is what I have so, I trust, the theory and the fact do not gel. I would not care except that I cannot see - using the nautilus network servers program, all of the XP computers with some of my linux boxes.
View 9 Replies
View Related
May 11, 2011
This all started when I had no sound being detected by my laptop's mic. I also have an external USB sound card and it was not detecting mic sound either. I had previously done recording with Audacity (it could have been back in Ubuntu 8.04).
Now, I had a feeling that I was going to break something trying to get the mic to work. Sure enough, I'm at the point now where I cannot logon to the GUI (gdm).
I made a number of changes before my last reboot.
Here's a summary of what I think is the primary cuase (pulseaudio!):
At one point, I had lost sound altogether (I believe this was a result of having installed pulseaudio Volume control, which someone used to unlock and configure their mic).
So, things were starting to degrade. Being the persistant and stubborn one that I am, I decide to trudge on.
I had read enough suggestions (and desite enough "didn't fix" responses), I decided to try removing pulseuadio altogether. After rebooting, I was not able to log on.
Let me try to describe this logon situation as clearly as possible: When the laptop boots up, it shows the Ubuntu logo with the colored dots below moving from right to left (orange/white).
When I get to the user logon screen, it's not as fancy as it normally is. The logon window which allows me to select the user is a little more basic and the background is a simple black/purple color. The day and time is displayed on the task bar below as well as a power icon with options to suspend, restart and shut down.
This is how the logon screen used to look:[url]
I've been unable to find a screenshot of the current state and I don't think I'll be able to post one due to my technologically limited situation.
When I select my user and enter the password, The screen goes blank (or displays what appears to be the console for CTRL+ALT+F1) and then I'm back at the user selection as described above as if I hadn't even tried to log on.
At this point, I'm not positive which distro I'm using, nor which kernel, but survey says:
My laptop is a Pavilion zd8000.
lspci shows I have: VGA compatible controller: ATI Technologies Inv M22 [Mobility Radeon X300]
I'm not sure if this is proper. When I run /etc/init.d/gdm stop, I get: Rather than invoking init scripts through /etc/init.d, use the service( utility, e.g. service gdm stop.
Probably not, because when I try sudo service gdm stop, it returns: stop: Unkown instance.
OK. Maybe it's OK, because running sudo service gdm start, I returned back to the logon screen. (But, I'll include this because it may indicate something, but I think it may be the way the "service" works now...)
(I do have networking enabled, so I can run apt-get and what not)
I find this interesting. I installed kdm. I started it after stopping gdm (through the service command as noted above). I was able to log on through kdm, but I'm not brought to a desktop, only a black background and a terminal window in the upper-left corner, without any window frames (I can't min/maximize/close). There doesn't appear any way to log out...
I'm not exactly sure where to go from here. I'm getting more interested in a backup/reinstall, but I may not have the ability to do that on hand, so I'd like to try to get things working. At the very least, I'd like to be able to log on and do work. Sound would be nice and a working mic would also be nice, but I can do without either of those two for now.
Most of the solutions I've been able to find in terms of not being able to log on has been a result of:
- Bad usernames/passwords
- Insufficient drive space to allow logon
While I haven't tried creating any new users and logging on with them, I'm confident it wouldn't do any good. df -a shows: /dev/sda1 Available = 6324296. Should be enough for basic operations.
My plan at this point is to start woking on the kdm angle. Since I am able to log on, but only to a terminal window, perhaps I can find some info on why that happens...
View 7 Replies
View Related
Mar 20, 2010
I am running Ubuntu 9.10 server and I am trying to get the IP address of the machine to display at boot (before login) but so far no luck. Here is what I have tried: Created a script called displayip:
#!/bin/sh
ifconfig eth0 | grep "inet addr:" | awk -F'inet addr:' '{print $2}'
which is located in the /etc/init.d directory. changed the permissions to make it executable: chmod +x displayip then ran update-rc.d displayip defaults which ran successfully. Upon boot it doesn't show up with anything.
View 1 Replies
View Related
Oct 26, 2010
Hey currently running Lucid x64. After installing tex-common due to there being errors on all app installations (the apps all seemed to work fine though). I am unable to proceed past the GUI logon, the screen just goes black and returns back to the logon screen. I should also note that the PC was setup to automatically login, so it shouldn,t ask me to logon any way.
I had installed many updates earlier that day and also the nvidia graphics driver (before updates), rgba gtk+ module, gnome-color-chooser and upgraded nautilius. All which where working fine at the point before tex-common installation.
View 3 Replies
View Related