Ubuntu Networking :: MSI Wind L2100 RaLink Wireless A/b/g/n "unclaimed"?
Jan 24, 2010
I've searched on-line and through these forums and I am still not able to find a solution to my problem. To start off, I do not know if my wireless card is turned on or off. I press Fn+f8 key and the LED turns on but Ubuntu does not detect the wireless networks. I am able to connect using the Ethernet port.
ps: I have already updated the Ubuntu software using the commands:
Quote:sudo apt-get update and sudo apt-get upgrade
My Product:Quote:RaLink RT3090 Wireless 802.11n 1T/1R PCIe
Ra-link makes a Linux driver for this card but from what I understand I should not install the driver unless I absolutely have to (do to the fact that it does not automatically update through the operating system) here is the link to the driver (btw, I do not know how to install driver on Ubuntu,
[Code]...
View 1 Replies
ADVERTISEMENT
Dec 25, 2010
I downloaded ubuntu on my wireless netbook my wireless network connection was not working so i checked on terminal and it said it was unclaimed meaning that ubuntu is not recognizing my built in wireless driver (hardware) what should i do becayse ubuntu could also not find the ndiswrapper?
View 7 Replies
View Related
Jan 6, 2011
I have HP Pavilion dv2860ee laptop with an intel wireless adapter ipw3945 on it. I recently installed ubuntue 10.10 on the laptop but ubuntu does not recognize my wireless adapter. I'm some how new to ubuntu but I almost tried everything that I could find from google to install drivers but they didn't work and wireless adapter is still unclaimed.
View 9 Replies
View Related
Aug 1, 2011
I've got a Broadcom 4311 card and since upgrading I can't connect to wireless. I went through the solutions in the sticky and I still can't connect, when I type lshw -C network I get:Quote:
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
[code]....
View 6 Replies
View Related
Sep 1, 2011
I installed the driver from Ralink (2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO) and followed the instructions in other threads and my card does not work. I am getting this message.
"$ dmesg | grep -e rt5 -e wlan
[ 14.454006] rt5390sta: module license 'unspecified' taints kernel. I have also installed the Ralink RutilT program using synaptic. I can see my wireless device and many others around me but I can't connect.
View 9 Replies
View Related
Oct 5, 2010
I'm not sure where to post this but seeing as how, at least as far as I can tell, the problem is related to the wireless card or drivers, I figure this is as good a place as any. On to the problem, I recently install openSUSE 11.2 Gnome on my MSI Wind U100 netbook. Everything appeared to work fine right after install, wireless and everything. However, soon after that I began having issues where the screen would freeze and I would be unable to do anything until I force restarted the computer.
Now I believe the problem is related to my wireless as this problem occurs most frequently when I am either downloading a lot of data over wifi or fiddling with the network. I have had it freeze many times while switching wireless networks or while experiencing wireless issues such as an intermittent connection. I may be completely wrong in my above analysis of the problem, but I figured i need to post somewhere to get started. If anyone feels this post may get more help in another forum, please just let me know.
View 1 Replies
View Related
Mar 11, 2010
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU).
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
View 1 Replies
View Related
Mar 11, 2010
Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?
View 1 Replies
View Related
Aug 18, 2010
this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?
View 2 Replies
View Related
Mar 10, 2011
I just want to setup adhoc network using the wireless card that came with the box but I'm having a hard time getting it up. I have gone through a lot of posts about wireless troubleshooting but nothing has solved it. Left clicking the network manager tray icon always says wireless network is disconnected. "Enable Wireless" is checked.
Some info:
Code:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]....
View 4 Replies
View Related
Mar 31, 2011
I been having trouble getting my rt2070 wireless usb card to work on my desktop. I am using Ubuntu 10.10.
[URL]
Pastebin of dmesg: [URL]
Code:
Representative portion in case pastebin wipes this entry:
[ 234.984025] hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
[ 234.984041] hub 1-0:1.0: unable to enumerate USB device on port 8
[Code].....
View 9 Replies
View Related
Jul 30, 2011
I've ubuntu 10.04 and I can't connect to router wi-fi with my new wireless adaptor usb (ralink 2870). I've tried various guides but nothing. The adaptor work fine with Windows and other linux distributions.
View 5 Replies
View Related
Jan 7, 2010
Even with both machines in the same room, I'm only getting 1Mbps when using a pair of TL-WN321G wireless USB adapters to link my main box and my laptop. I'm using Fedora 11 on both machines. It is just as bad if I use the laptop's built-in wireless. lsusb shows the adapter uses the Ralink RT2501USB chipset. iwlist wlan0 rate gives "wlan0 unknown bit-rate information."
View 1 Replies
View Related
Aug 29, 2010
I use Ubuntu 9.04 and try to get a Sweex LW053 USB wireless card (Ralink RT73/RT2500 chipset) to work. According to the Wiki list in the sticky thread, this one should work "out of the box" since 8.04.
lsusb delivers
Bus 002 Device 002: ID 148f:2573 Ralink Technology Corp. RT2501USB Wireless Adapter
and there is also some wlan0 entry that doesn't look too dodgy when typing ifconfig.
From this I get that my laptop recognizes the card.
I also typed in some numbers such as SSID and DNS server address in Preferences>Network Connections where asked (although the information that I had wasn't 100% what was asked for so I tried to guess what needs to be filled in which fields).
However, I don't get an internet connection (Firefox can't find server...)
What else do I have to (or can I) do?
View 1 Replies
View Related
Sep 13, 2010
I'm having trouble installing my RaLink RT2561/RT61 wireless card. It seems that this driver causes problems for all ubuntu users, and I've tried a couple of work arounds, none of which work for me.
Firstly I downloaded the most recent driver from here: [URL]...RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661) is the driver I downloaded. Next I performed the following steps:
Code:
robinsjp@home-desktop:~$ sudo apt-get install linux-headers-`uname -r` build-essential gcc
Reading package lists... Done
Building dependency tree
[Code]...
View 9 Replies
View Related
Nov 6, 2010
I have strange behaviour on my portable computer Asus UX30. I'm using latest Ubuntu 10.10 release. The main problem, and the most annoying, is a system freeze on shutdown, suspend, hibernate or even restart. For a week I'm trying to find a solution on the web, but no result. From what I noticed, computer freezes when a wireless card is turned off or on. Here are some basic info from wireless card:
Code:
sudo lshw -class Network
*-network
description: Wireless interface
product: RT3091 Wireless 802.11n 1T/2R PCIe
vendor: RaLink
[Code]....
View 4 Replies
View Related
Jun 24, 2011
I use Ubuntu 11.04 on a PC clone desktop.With ethernet cable connects automatically, despite compiling wlan0 not connected. Do not know what I installed Ubuntu 10.04 and 11.04 over 30 times and still the same. Try to manually connect to the network connection did not work either hidden and also deal with ipv4 address assigned and neither worked.
1 ) Machine Brand and Model (PC/Laptop):
desktop pc, clon.
2)lspci
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)[code].....
Try setting manually to no avail not know if I did well. Ralink also downloaded from the rt2860sta and then compiled and did not work. Now I went to install Ubuntu 11.04 and change nothing but that which is above is what I have right now in the machine.
View 9 Replies
View Related
Jun 30, 2011
My wireless download rate is absurdly low (0.3 mbps) compared to a faster upload rate (1.5 mbps). My girlfriend's laptop running windows gets much higher download rate (20+ mbps).
View 8 Replies
View Related
Apr 20, 2009
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies
View Related
Aug 6, 2010
I just installed Fedora 13, and now I figured, maybe I don't know so much about pc anyway. Before I tell you my problem, I would like to say that I know a lot about windows, but about linux, I don't know anything. A plain beginner. And about my problem, it's more like a "how to" question than a problem.
You see, I don't know how to set up the wifi? The pc has installed wifi, and all I need to know is how I can connect to the internet. In windows you would usually just press the connection icon and then choose witch network you would like to access, and then eventually type in the password, and there you go. But it seems it's a little more advanced at Fedora. But I will give it a shot.
View 11 Replies
View Related
Feb 27, 2010
My wireless on my Ubuntu desktop is really slow compared to my windows laptop. Its not a flash problem or a browser specific problem.
I have searched the forums but can't find much.
I did disable ipv6 (it now shows up as being 'ignored' in network Manager which is correct, right?) but that hasn't helped.
It doesn't make a difference whether I use DHCP for everything or just for address only with the Google DNS addresses.
After entering 'lspci' my card shows up as
Code:
Because of a problem with system freezes I have updated to the 2.6.33-020633rc7 kernal but this hasn't had any impact one way or another on wireless speeds.
My router is a Belkin WRT300n.
View 2 Replies
View Related
Sep 5, 2010
Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.
The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.
A screen grab is attached.
I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04
PS. I have no networking on the system but I can transfer files via USB flash drives if needed.
Some System info:
Code:
1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650
2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI
3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code].....
View 1 Replies
View Related
Jan 20, 2011
I've been trying to connect gt my wirelss running on my an MSI wind u230. First I tried with the default configuration; it could not find any wireless networks. Then I tried the Ralink 3090 driver from Markus Heberling's PPA; it still could not find any wireless networks. then I tridading the followwing to /etc/modprobe.d/blacklist.conf
<code>
blacklist rt2800pci
blacklist rt2800lib
blacklist rt2x00usb
blacklist rt2x00pci
blacklist rt2x00lib
</code>
and still could not find any wireless networks. Finally, I used the ndiswrapper with the windows driver. I can now find the wireless networks but when I try to connect, I get a 'bad password" on encrypted wetworks and "cannot opbatain IP address" errors on unencrypted networks.
View 5 Replies
View Related
Jun 7, 2010
I'm using a Dell with Broadcom bcmwl6.inf driver. I tried the guides using ndiswrapper, but they didn't work for me. What worked was simply going to System -> Administration -> Hardware drivers and activating the Broadcom STA proprietary driver. That sounds great, but every time I restart, I have to remove and install the driver from Hardware Drivers.
What should I do to keep the driver loaded and claimed at the start. This is my lshw -C network before and after removing and installing wireless card driver.
[Code]...
View 3 Replies
View Related
Dec 29, 2010
I am dual booting with windows xp on a dell computer I recently acquired. I am running Ubuntu 10.10. The computer didn't have a wireless connection so I installed a wireless pci adapter from a company called ZONET. I installed it perfectly on windows xp, however, I cannot install the driver and the "Ralink Wireless LAN" on Ubuntu. I inserted the cd, and opened the setup.exe file with Wine Windows Program Loader (I have installed Wine 1.3 by following the instructions on http://www.winehq.org/download/deb and clicking on the link that says "click here".
I am currently temporarily connected to the internet by borrowing my main computers ethernet cable). I followed the instructions on the InstallShield Wizard only to have two windows pop up saying there is an error (see attached image).
View 9 Replies
View Related
Jan 25, 2011
I have a MSI netbook, U100, on which I've installed Ubuntu 10.10. This keeps disconnecting from the network, though the applet shows me that the netbook found it. I mention that I have a wireless network and another laptop, with WIN 7, where I have no problems with the Internet connection. I also have a 3G USB modem, which let me connect without problem.
View 3 Replies
View Related
Mar 13, 2010
I LOVE Ubuntu,but the sketchiness with WIFI in Ubuntu is really frustrating (not that it's Ubuntu or GNU/Linux's fault necessarily). I'm trying to find a good WIFI card replacement for my girlfriend's MSI Wind u90, but seems both the Intel 3945abg and the Intel 4965agn - the cards usually recommended for that model - seem to be spotty at best in all recent versions of Ubuntu including the last long-term release. Has anyone had success with a Broadcom 1020 (in any laptop but especially in a netbook)?
View 1 Replies
View Related
Jan 1, 2011
since the upgrade i see all avaible wifi networks as they have 100% signal, both in NetworkManager and Wicd.in iwconfig and iwlist the signal levels change, but the link quality remains the same: 70/70 (see below). What could be worng? What can i do?
comp. model:
msi wind u100 netbook, ubuntu 10.10, kernel: 2.6.35-24-generic i686
lspci:
Code:
02:00.0 Network controller: RaLink RT2860
Subsystem: Micro-Star International Co., Ltd. Device 6890
Physical Slot: 0-1
Flags: bus master, fast devsel, latency 0, IRQ 17
[code]....
View 3 Replies
View Related
Oct 19, 2010
I just installed 10.10 on a my new Aspire One Acer netbook and I got a mobile broadband USB stick from Wind mobile.
The stick is activated because it works on my 20 GB Windoze 7 O.S. but it doesn't work at all on my 140 GB Ubuntu O.S. Both systems are on the same machine so I know it's not a hardware problem either.
Here's what happens: I log on to Ubuntu, plug in the stick and I select the "New mobile broadband GSM connection" in the network connections menu.
From there I selected my country (Canada) and my mobile provider (Wind Mobile) than I selected my plan (Mobile Broadband) and my APN (broadband.windmobile.ca).
Then the stick blinks slowly and the network icon looks forever for a connection but no matter how long I wait no connection ever establishes. My roomate has it working on his HP laptop Ubuntu but no luck on mine. The stick just keeps blinking, a steady light indicates a connection.
View 3 Replies
View Related
Apr 26, 2010
About a year ago I had a different computer with this same wireless card (edimax EW-7128g) and it was recognized immediately after I installed ubuntu 8.10. I found this hardware compatibility page, and it says it is compatible, at least on 9.04.
After reading this old guide I found:[URL].. I downloaded the latest driver, and followed the instructions (i had to refer to the readme too, some things were slightly different which I'm assuming is because it's the 2010 driver not the version referred to in that tutorial) up until:
(e) copy the rt61.ko driver file to the modules directory then load it
Code:
$ sudo cp rt61.ko /lib/modules/`uname -r`/kernel/drivers/net/.
$ sudo depmod
$ sudo modprobe rt61
I don't see where rt61.ko is.I've got the information for my wireless connection edited into /etc/Wireless/RT61STA/ rt61sta.dat iwconfig shows pretty much default stuff, no mention of my wireless card or any type of connection, though the card does show up at the bottom of the lspci query. I added the wireless connection information into the "Network Connections" prompt in the preferences, but obviously that's not accomplished much of anything for obvious reasons. Should I just install 9.04? Judging from this account, getting this wireless card to work would be a hell of a lot easier.
View 3 Replies
View Related
