Ubuntu Networking :: How To Set Up Client Side Of SAMBA

May 26, 2010

I would like to be able to mount a share served by my mac os X machine(10.6.1). I have read the Ubuntu community doc on Ubuntu samba clients.It didn't say what to do when using dynamic LAN I.Ps.I understand the way to go is to use avahi on the client side(Ubuntu) and Bonjour on the server side(mac os 10.6.1).I can't find anything about how this is done.What do i need to do to set up the client side(Ubuntu) to use avahi with SAMBA?.Because in the Ubuntu community doc it just referenced /etc/hosts, which is for static I.Ps.So i'm assuming that SAMBA on Ubuntu doesn't use avahi by default.All i need to know is how to set up the client side of SAMBA on Ubuntu when i'm using dynamic LAN I.Ps.

View 5 Replies


ADVERTISEMENT

Networking :: Changes On The Server Side Aren't Visible On The Client Side?

Jan 10, 2011

I'm using NFS and I have the following problem. After ~100 days, the client and server lose connection, but the client doesn't know about this, it gives no error. The problem is that the changes on the server side aren't visible on the client side.

The nfs options are: "noatime, nolock, hard, udp, notcp, nosuid, nodev, rsize=8192, wsize=8192, actimeo=60"

The kernel version is: 2.6.16.27 built with 250 Hz. Is this an already corrected issue in a kernel version? Or are my options wrong?

View 1 Replies View Related

Networking :: Possible To Get The Available Bandwidth Run App In Client Side

Nov 26, 2010

Calculating the available bandwidth methods IGI/PTR,PATHLOAD,SLOPS,PACKET PAIR...

I gone through above methodogies ,when i finish one methods(IGI/PTR) i came to know,one application should run in client side and another application should run in server side (i.e,) Internet Service Provider side,

In IGI/PTR method ./ptr-client.c & ./ptr-server.c is there .,if we want available bandwidth,I Should run ./ptr-client.c (in myside)correspondingly ./ptr-server.c then only we wil get a availble bandwidth...

My need is without run any application on the server side ./ptr-server.c like that,but I should develop the application only on client side (in my routerside based on linux)..

1:whether it is possible to get the available bandwidth run application in client side only?.if possible. how i implement the code in client side( only )for getting the available bandwidth ...whether any source code is available?...

I dont want to test the speedtest.in (in GUI )

View 1 Replies View Related

Networking :: Manipulate An URL On The Client Side?

Nov 23, 2010

i'm unable to see some musicvideos on videos in germany trough copyright restrictions. i can see these videos by using a tunnelservice, but it isn't very comfortable.
in that case, i have to copy the url and paste it at the end of the tunnelservice url. a lot of stupid work.

my problem is, that i haven't enough experience to automate these actions.

i think, that i have to modify the url befor it goes to the server. there must be somewhere in the osi stack a place where i simply can modify that url with a regex but i don't know where

View 4 Replies View Related

Fedora Networking :: Possible To Get The Available Bandwidth Run App In Client Side?

Nov 26, 2010

Calculating the available bandwidth methods IGI/PTR,PATHLOAD,SLOPS,PACKET PAIR...I gone through above methodogies ,when i finish one methods(IGI/PTR) i came to know,one application should run in client side and another application should run in server side (i.e,) Internet Service Provider side,In IGI/PTR method ./ptr-client.c & ./ptr-server.c is there .,if we want available bandwidth,I Should run ./ptr-client.c (in myside)correspondingly ./ptr-server.c then only we wil get a availble bandwidth...My need is without run any application on the server side ./ptr-server.c like that,but I should develop the application only on client side (in my routerside based on linux).. 1:whether it is possible to get the available bandwidth run application in client side only?.if possiblehow i implement the code in client side( only )for getting the available bandwidth ...whether any source code is available?

View 2 Replies View Related

Networking :: Login Multiple Client Pc On Using Via Openvpn Server From That Side?

Nov 24, 2010

How to login multiple client pc on the same network using via openvpn server from client side

View 1 Replies View Related

Networking :: OpenVPN - Can't Ping From Server To Client Side Hosts / Make It Possible?

Mar 20, 2009

Code...

What I can ping
Host A -> Host B
Host B -> Host A

Host A -> Router B
Host B -> Router A

Host A -> OpenVPN B
Host B -> OpenVPN A

VPN Server -> VPN Client
VPN Client -> VPN Server

What I can't ping
VPN Server to any client side host local address
VPN Client to any server side host local address

I have searched and searched for this but can not find any answers. Why can I not ping Host B from my OpenVPN server?

View 1 Replies View Related

CentOS 5 Networking :: Config Proxy Client Side For CentOS 5

Oct 4, 2010

I've tried to read many of the topics in this forum first and tried to find a solution to my problem, but can't find one.I'm testing CentOS 5.5, it's the first time I'm using a CentOS Linux release.I'm trying to configure the proxy "client side " on it and cannot find how to do it.On other Linux release I've used the ENV variable like "http_proxy" or "HTTP_PROXY" etc etc.This time, I don't know why but it doesn't work.I've put the name and @ip of the proxy in /etc/hosts and tried different version upper/lowercase of "http_proxy" "HTTP_proxy" "ftp_pr.." but it doesn't work.If I configure manually Firefox and puting the name or @ip of the proxy we have on our network, it works.But if I try to use ENV variable it doesn't work...

View 1 Replies View Related

Ubuntu Networking :: Unable To See Samba Share From Client Machines?

Feb 15, 2010

I just set up an ubuntu 9.10 server (no desktop environment, command line only) and I'm unable to see my samba share. I followed these instructions. Here are the relevant parts of my smb.conf file: Quote:

workgroup = JASONGROUP
# I un-commented this
security = user

[code]....

View 9 Replies View Related

Ubuntu Networking :: VPN Client And Samba/SSH Server On One Physical Machine?

Jun 3, 2010

I'd like to access a samba/SSH server which itself is connected to a VPN Server, therefore acting as a VPN Client. As soon as the VPN Connection is established, samba and ssh connections to this VPN Client get a timeout. But not all of them.

To get a better understanding I made an overview. The first one is a general network overview, without any VPN Connection, the second one with the VPN Connection established.

Network Overview without VPN
I can access the server in several ways:
*From the router via ssh (router runs ipcop with busybox)
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)

Everything is working as it should.

Now the server that runs ssh and samba service connects to a VPN Server on the Internet, this is also working fine. Now it gets weird. The only samba/SSH connection that is still working is ssh directly from the router to the server. Everything else gets a timeout:
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Network Overview with VPN active

Why is that? It seems from the little understanding I have of vpn and networking, that incoming packages (like samba request from the laptop) don't get send directly back over eth0 but over the vpn connection. This seems somewhat logic, BUT ssh from the router is still working. Why from the router and not from the laptop? I really can't get my head around it.

Configuration Overview

tldr; One Client acts as VPN Client and samba/SSH Server. As soon as the VPN Connection is established samba/SSH stop working, but only partially.

View 1 Replies View Related

Fedora Networking :: Samba Client - Could Not Open Location

Mar 2, 2009

I'm having a problem when browsing shares on other machines. If I hit alt+f2 and enter "smb://server" I get an error saying:
Could not open location 'smb://server/'
No application is registered as handling this file
If I enter "smb://server/share1" everything works fine. Typing the server name without the share name worked fine in Fedora 8, which is what this machine was running before I did a clean install of Fedora 10.

View 2 Replies View Related

Networking :: Samba Client Shares Disconnect Over OpenVPN Connection

Jun 23, 2010

My network is barely functional. I'm running 2 linux servers connected by openvpn (tun) through routers on both sides. There are Windows clients (98 and XP) on both subnets. One server (ls3) acting as PDC for the domain. The Windows clients use the respective linux boxes as gateways. On the server side (ls3 which is both openvpn server and samba server), all the clients can read/write properly to shares on both sides. The problems are all on the client side. Share connections to the server side disconnect after a few moments.

Browsing on the client side windows machines is fine. I can see shares on the server side. Some server side files open and are readable, writable, other server side files will not open. Some samba logon scripts on the server side can be opened from the client side. Others open after a long wait to a blank file! Permissions on server side files are set to 777 for testing. If a file won't open or reads "blank", that doesn't change no matter how many times you try. A non-readable/writable file overwritten by a readable/writable one can be read and written to!

I can ping successfully from any client on either side to any other client by either ip address or workstation name. Firewalls on both side are set to forward tcp and udp traffic going to port 1194 to the respective gateway linux boxes. Iptables on both linux gateways are down for testing. I tried reversing the openvpn server/client roles with the same result; the same physical side of the network had the problem. On one of the windows 98 clients, I wiped out the networking configuration completely and rebuilt it from scratch. Same result.

One one of the windows xp clients, I tried to rejoin the domain. It went through successfully but the result was the same as above. The network was operating smoothly for several years until the client side dsl modem broke last week. It was replaced with a newer model and at the same time I migrated from a pptp connection to openvpn. How to resolve this, Is this something to do with openvpn? Is this a network hardware problem? Am I missing something in the port forwarding on the routers? My smb.conf files are ancient except I added interface tun0. I have never seen 2 files sitting next to each other in the same directory where one opens and the other doesn't!

I'm running Mandrake 9.2 on the client side and Mandriva 2008 on the server side. I have a Sonicwall firewall on the server side, a Westell 7500 on the client side. I note that during the modem install, the http port was opened to the linux box on the client side and the access log got huge over the weekend and I ran out of disk space until I closed it down and deleted the log. I tried a simple test while viewing /var/log/daemons/errors on the client side. From a windows workstation in the client subnet, I opened a dos window and tried to print a file located on the samba server on the openvpn server machine which I knew NOT to be problematic.

The file printed and there were no errors reported in the log. I repeated the test with a known problematic file. The file would not print. The errors log noted:
Authenticate/Decrypt packet error: packet HMAC authentication failed
I regenerated the static.key file on the server side and scp'd it to the client side and restarted both openvpn's. I checked for duplicate files named static.key on both sides. Same error.

View 1 Replies View Related

Networking :: Samba PDC - Client Machine Create New Profile When Server Down

Dec 14, 2010

I have set samba domain. I am able to add win 7 and xp clients. All r working fine. But I have a doubt. If I shutdown the samba pdc server, I should be able to login the client machine with the same profile (which I had, when the samba pdc server was up). Now , if I shutdown the sambapdc, I am able to login the client machine, but new profile is being created. How to avoid this.

How to say to samba that the client machine should load the same profile which was created when the server was up and running. I do not want the client machines to create new a profile when the server is down bcoz in windows domain, when the windows domain is shutdown, the client machines are able to login with the same profile (the profile which was created when the domain was up). I wish to have same thing in samba pdc also.

View 2 Replies View Related

Ubuntu Networking :: Samba Client - Failed To Retrieve Share List From Server

Apr 15, 2010

I have been using Ubuntu sense about 6.10 and never had to network with a Windows computer before. I have a decent understanding of Linux itself but I am having issues with this samba client. I have a clean install of Ubuntu 9.10 and am trying to use samba to access my shares on a Windows XP(SP3) computer. I am on the network just fine, and all the computers on the network have static IP addresses. When I go to Places->Network->Windows Network I see the "TITANNET" workgroup, (Even before I changed my workgroup to "TITANNET" in the smb.conf file.), but when I try to access it I get this error:

Code:
Unable to mount location
Failed to retrieve share list from server.

P.S.[0] I tried using /etc/init.d/samba restart but it did not work, I am not sure I am even running the samba server. (Well, it is obvious I am not, what I really mean is what am I running to (not =D)access the shares on my Windows PC.)
P.S.[1] I know that this has probably been posted before. I have searched and searched, I am about 1.5 pots of coffee and 4 hours into this.

View 2 Replies View Related

Programming :: Display On The Client Side One Name Only For Each

Jan 6, 2011

I have hundreds of thumbnail images and I need to display on the client side one name only for each when the visitor passes the mouse over them. The only way I know (using frames in this case) is to use a script similar to the following:

<a href="" target="" onMouseOver='top.nav3.location="not/notecome.htm"' onMouseOut='top.nav3.location="nav.htm"'>

But this involves creating a full and w3c correct HTML document which looks like an over-kill of the problem.

Is there a simpler way to solve the problem? If not, is it acceptable to use a truncated HTML document comprising only the necessary tags to make it work on the test machine (<html><body><.....onMouseOver.....></body><?html>

Or a way to display the content of the "alt" tag (I can put that name there)?

In the worst case, I could use the javascript "Alert" but it does not fit esthetically and it needs one mouse click from the visitor. Is it possible to make one's own "Alert" picture and how?

View 3 Replies View Related

Networking :: Configure Nfs Mount Disk To Samba Share For Windows Client ?

Nov 8, 2010

I am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.

View 2 Replies View Related

Networking :: Winbindd Run On Box Client On Network With Samba Ldap Server Configured As PDC?

Oct 28, 2010

Does winbindd must run on linux box client on network with samba ldap server configured as PDC.

View 5 Replies View Related

Networking :: Samba Client Accessing Windows Shares On Secondary Subnet

Sep 13, 2009

I have a machine acting as a gateway for a private network. While it can ping hosts on that private network, I can't use samba (smbclient or smbmount) to access shares on hosts on the private network from that machine. Other machines on the private network can access shares on other machines - just not the gateway server.

Here's how the gateway is configured:

When I try to connect to ports 139 or 445 (via smbclient or smbmount) the mount() system call times out. As I mentioned above, I can ping those hosts, so UDP packets work but TCP packets seem to get blocked or lost.

View 1 Replies View Related

CentOS 5 Server :: NIS Not Working On The Client-side?

Dec 3, 2008

I recently got a new server. I installed CentOS 5.2. Here's some more info:

[root@thalamus etc]$ uname -a
Linux thalamus.tch.harvard.edu 2.6.18-92.el5 #1 SMP Tue Jun 10 18:51:06 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux

View 13 Replies View Related

Ubuntu Servers :: Serial Ports On Client Side Ltsp Setup?

Dec 12, 2010

I have recently installed an ltsp system, client and server. Everything works except i cannot get my client side serial ports to work or register for that matter. Can anyone point me to the steps i should take to get these working.

View 1 Replies View Related

Programming :: Automate Periodical Activities In A Website (client Side)?

Jan 12, 2011

automate daily routines in a website. The things what I should do is to:

- log in
- click on HTML objects (I think I have to trigger the JavaScript onclick event)

Code:

<a href="http://www.xtremetop100.com/in.php?site=11111111" target="_blank" class="account_links">
<img src="/resource/bla/bla/vote/xtop100.gif" border="0"/>
</a>

(This is an image what I have to click on, after it I will receive a reward, then I have to wait 12 hours to benefit from it again.) My first idea was that to code it in C++, and I have searched the internet for the appropriate C++ headers, but I did not find any. So as you can see its not a concrete programming question, my main question is that, in what way could I do the above mentioned things.

View 4 Replies View Related

Fedora Servers :: LDAP Authentication Of Unregistered User At Client Side?

Sep 2, 2011

I have a openldap server running on one machine (fedora10) and pam_ldap.so and nss_ldap.so running on the other machine.

I have added a new user to the LDAP server database, this user is not created on client machine.

1. Can i login to the client machine using this new user?

2. Now if i try logging with this new user I am getting error messages, the error messages are as follows at client side

Sep 2 10:34:36 localhost sshd[8484]: Invalid user kim from 10.254.194.148
Sep 2 10:34:36 localhost sshd[8485]: input_userauth_request: invalid user kim
Sep 2 10:35:16 localhost sshd[8484]: pam_ldap: error trying to bind as user "cn=min soo,ou=people,dc=samsung,dc=com" (Invalid credentials)

[Code]....

View 4 Replies View Related

General :: Backup / Setup A Second VPN Tunnel On A Fallback Gateway / Firewall On The Client Side

Mar 1, 2011

I've set up a Lan-to-Lan (routed) OpenVPN tunnel. For redundancy I want to set up a second VPN tunnel on a fallback gateway/firewall on the client side. Currently, both sides (server/client) know how to route packets across each others physical LAN. So no NAT is used. When the primary gateway (fw1) is connected to the VPN server all traffic runs via the fw1 tunnel. Than when the secondary gateway (fw2) connects to the VPN server and fw1 is still connected all traffic for fw1 will be delivered to fw2 and effectively destroying traffic intended for fw1. This is of course no problem if I first shutdown (fence) fw1, than set up fw2 to use the gateway IP address from fw1 and set up the VPN tunnel to the VPN server. Effectively replacing fw1 with fw2 on the client side.
However, I can't seem to find a decent howto.

I am also exploring the possibility to let both tunnels active and let OpenVPN (or another tool) decide how to route packets back and forth the different LANs. A virtual IP between two gateway's both running a VPN or something similar. This would be the preferred method of course. However, I don't know how to tackle this one but I'm pretty sure there are people out there who are happy to share their 2 cents.

View 3 Replies View Related

Software :: 10.04 - Couldn't Open Localsound Device Error 2 Client Side Error: Could Not Set Up A Stream

Jul 18, 2010

I just installed say with

Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T

Could not open localsound device, error 2 Client side error: Could not set up a stream

View 6 Replies View Related

Server :: Insert "show Interface Status" Output To A Client Side Webpage?

Nov 16, 2010

I need to show an output of the command "show interface status" executed on a server side in new window on client side. In other words: on client side web browser page I would like to have a link which I can click and get output of command "show interface ... status" in a new window. On web server script has to connect to switch/router, execute this command and send output to client window.

where to look, and, may be explain, what can be better for this purpose? I need a clue, because I have newer done it before. It should not be snmp, because I want to view many different outputs and snmp wont help me.

View 2 Replies View Related

Programming :: Client Side To Include HTML Within HTML?

Sep 12, 2009

what is the best way (i.e standard way that is supported on all browsers and probably as well followed by web crawlers).... to include an html file either locally or externally in another ? Of course , i've done the research and i also know that there are server side includes (php , asp ...you name it) at the moment , i'm using this:

Quote:

<script type="text/javascript" src="path to file/include-file.js"> </script>

however, i've been warned that this method may not show up in some browsers as some tend to ignore this tag and that crawlers like your favorite search engine wouldn't bother reading this. so , what is the best and safest way to do the job? and btw , the reason why i've ousted SSI's from the start is because of among other things:

1) the fact that the included file is static html and because the text is included pretty much everywhere

2) hoping to reduce load time as the code (if successfully recognized) would hopefully be treated like any other embedded external file (e.x like an image) , therefore it would be cached without the need to downloaded it over and over again for each new page on the site.

View 1 Replies View Related

Ubuntu :: Easy To Use Samba Web Client ?

Aug 22, 2010

point me to a web based admin tool for the admin of samba shares that a beginer to ubuntu could use easily ?

View 3 Replies View Related

General :: Ubuntu - Play Two Or More Videos Side By Side In A Synchronized Fashion

May 10, 2010

I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux?

This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.

View 1 Replies View Related

Installation :: Partition On My Computer To Run Windows Vista And Ubuntu Side-by-side?

Sep 24, 2010

Will I be able to have a partition on my computer to run Windows Vista and Ubuntu side-by-side?

View 2 Replies View Related

Ubuntu :: Make New Icons Automatically Add To Right Side Instead Of Left Side Of Desktop?

Dec 18, 2010

If a file gets created in the user's Desktop folder, or if a drive is added to the machine and a Desktop icon is correspondingly created, they will by default appear on the left side of the desktop (unless, in the case of the latter, the specific drive has been created before and dragged to the right side, in which case GNOME will remember to put it in the same place).

Because I have a terminal window embedded onto my Desktop in the top left corner and occupying most of the screen), I keep my icons on the right side of the Desktop instead of the left (Mac style) - Any time I add a new drive or a file is sent to the Desktop, however, I have to kill the terminal window to be able to click on the icon, then drag it back to the right side, then restart the terminal.

Is there any way to tweak GNOME so that these icons are added from the top right corner and down instead of from the top left, automatically?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved