Networking :: Manipulate An URL On The Client Side?
Nov 23, 2010
i'm unable to see some musicvideos on videos in germany trough copyright restrictions. i can see these videos by using a tunnelservice, but it isn't very comfortable.
in that case, i have to copy the url and paste it at the end of the tunnelservice url. a lot of stupid work.
my problem is, that i haven't enough experience to automate these actions.
i think, that i have to modify the url befor it goes to the server. there must be somewhere in the osi stack a place where i simply can modify that url with a regex but i don't know where
I'm using NFS and I have the following problem. After ~100 days, the client and server lose connection, but the client doesn't know about this, it gives no error. The problem is that the changes on the server side aren't visible on the client side.
Calculating the available bandwidth methods IGI/PTR,PATHLOAD,SLOPS,PACKET PAIR...
I gone through above methodogies ,when i finish one methods(IGI/PTR) i came to know,one application should run in client side and another application should run in server side (i.e,) Internet Service Provider side,
In IGI/PTR method ./ptr-client.c & ./ptr-server.c is there .,if we want available bandwidth,I Should run ./ptr-client.c (in myside)correspondingly ./ptr-server.c then only we wil get a availble bandwidth...
My need is without run any application on the server side ./ptr-server.c like that,but I should develop the application only on client side (in my routerside based on linux)..
1:whether it is possible to get the available bandwidth run application in client side only?.if possible. how i implement the code in client side( only )for getting the available bandwidth ...whether any source code is available?...
Calculating the available bandwidth methods IGI/PTR,PATHLOAD,SLOPS,PACKET PAIR...I gone through above methodogies ,when i finish one methods(IGI/PTR) i came to know,one application should run in client side and another application should run in server side (i.e,) Internet Service Provider side,In IGI/PTR method ./ptr-client.c & ./ptr-server.c is there .,if we want available bandwidth,I Should run ./ptr-client.c (in myside)correspondingly ./ptr-server.c then only we wil get a availble bandwidth...My need is without run any application on the server side ./ptr-server.c like that,but I should develop the application only on client side (in my routerside based on linux).. 1:whether it is possible to get the available bandwidth run application in client side only?.if possiblehow i implement the code in client side( only )for getting the available bandwidth ...whether any source code is available?
I would like to be able to mount a share served by my mac os X machine(10.6.1). I have read the Ubuntu community doc on Ubuntu samba clients.It didn't say what to do when using dynamic LAN I.Ps.I understand the way to go is to use avahi on the client side(Ubuntu) and Bonjour on the server side(mac os 10.6.1).I can't find anything about how this is done.What do i need to do to set up the client side(Ubuntu) to use avahi with SAMBA?.Because in the Ubuntu community doc it just referenced /etc/hosts, which is for static I.Ps.So i'm assuming that SAMBA on Ubuntu doesn't use avahi by default.All i need to know is how to set up the client side of SAMBA on Ubuntu when i'm using dynamic LAN I.Ps.
I've tried to read many of the topics in this forum first and tried to find a solution to my problem, but can't find one.I'm testing CentOS 5.5, it's the first time I'm using a CentOS Linux release.I'm trying to configure the proxy "client side " on it and cannot find how to do it.On other Linux release I've used the ENV variable like "http_proxy" or "HTTP_PROXY" etc etc.This time, I don't know why but it doesn't work.I've put the name and @ip of the proxy in /etc/hosts and tried different version upper/lowercase of "http_proxy" "HTTP_proxy" "ftp_pr.." but it doesn't work.If I configure manually Firefox and puting the name or @ip of the proxy we have on our network, it works.But if I try to use ENV variable it doesn't work...
I have hundreds of thumbnail images and I need to display on the client side one name only for each when the visitor passes the mouse over them. The only way I know (using frames in this case) is to use a script similar to the following:
But this involves creating a full and w3c correct HTML document which looks like an over-kill of the problem.
Is there a simpler way to solve the problem? If not, is it acceptable to use a truncated HTML document comprising only the necessary tags to make it work on the test machine (<html><body><.....onMouseOver.....></body><?html>
Or a way to display the content of the "alt" tag (I can put that name there)?
In the worst case, I could use the javascript "Alert" but it does not fit esthetically and it needs one mouse click from the visitor. Is it possible to make one's own "Alert" picture and how?
(This is an image what I have to click on, after it I will receive a reward, then I have to wait 12 hours to benefit from it again.) My first idea was that to code it in C++, and I have searched the internet for the appropriate C++ headers, but I did not find any. So as you can see its not a concrete programming question, my main question is that, in what way could I do the above mentioned things.
I have a openldap server running on one machine (fedora10) and pam_ldap.so and nss_ldap.so running on the other machine.
I have added a new user to the LDAP server database, this user is not created on client machine.
1. Can i login to the client machine using this new user?
2. Now if i try logging with this new user I am getting error messages, the error messages are as follows at client side
Sep 2 10:34:36 localhost sshd[8484]: Invalid user kim from 10.254.194.148 Sep 2 10:34:36 localhost sshd[8485]: input_userauth_request: invalid user kim Sep 2 10:35:16 localhost sshd[8484]: pam_ldap: error trying to bind as user "cn=min soo,ou=people,dc=samsung,dc=com" (Invalid credentials)
I have recently installed an ltsp system, client and server. Everything works except i cannot get my client side serial ports to work or register for that matter. Can anyone point me to the steps i should take to get these working.
I've set up a Lan-to-Lan (routed) OpenVPN tunnel. For redundancy I want to set up a second VPN tunnel on a fallback gateway/firewall on the client side. Currently, both sides (server/client) know how to route packets across each others physical LAN. So no NAT is used. When the primary gateway (fw1) is connected to the VPN server all traffic runs via the fw1 tunnel. Than when the secondary gateway (fw2) connects to the VPN server and fw1 is still connected all traffic for fw1 will be delivered to fw2 and effectively destroying traffic intended for fw1. This is of course no problem if I first shutdown (fence) fw1, than set up fw2 to use the gateway IP address from fw1 and set up the VPN tunnel to the VPN server. Effectively replacing fw1 with fw2 on the client side. However, I can't seem to find a decent howto.
I am also exploring the possibility to let both tunnels active and let OpenVPN (or another tool) decide how to route packets back and forth the different LANs. A virtual IP between two gateway's both running a VPN or something similar. This would be the preferred method of course. However, I don't know how to tackle this one but I'm pretty sure there are people out there who are happy to share their 2 cents.
I need to show an output of the command "show interface status" executed on a server side in new window on client side. In other words: on client side web browser page I would like to have a link which I can click and get output of command "show interface ... status" in a new window. On web server script has to connect to switch/router, execute this command and send output to client window.
where to look, and, may be explain, what can be better for this purpose? I need a clue, because I have newer done it before. It should not be snmp, because I want to view many different outputs and snmp wont help me.
what is the best way (i.e standard way that is supported on all browsers and probably as well followed by web crawlers).... to include an html file either locally or externally in another ? Of course , i've done the research and i also know that there are server side includes (php , asp ...you name it) at the moment , i'm using this:
Quote:
<script type="text/javascript" src="path to file/include-file.js"> </script>
however, i've been warned that this method may not show up in some browsers as some tend to ignore this tag and that crawlers like your favorite search engine wouldn't bother reading this. so , what is the best and safest way to do the job? and btw , the reason why i've ousted SSI's from the start is because of among other things:
1) the fact that the included file is static html and because the text is included pretty much everywhere
2) hoping to reduce load time as the code (if successfully recognized) would hopefully be treated like any other embedded external file (e.x like an image) , therefore it would be cached without the need to downloaded it over and over again for each new page on the site.
How would I use a unix grep regular expression to find any two capital letters side by side and how would I find an expected comma in an expected spot?
I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux?
This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.
If a file gets created in the user's Desktop folder, or if a drive is added to the machine and a Desktop icon is correspondingly created, they will by default appear on the left side of the desktop (unless, in the case of the latter, the specific drive has been created before and dragged to the right side, in which case GNOME will remember to put it in the same place).
Because I have a terminal window embedded onto my Desktop in the top left corner and occupying most of the screen), I keep my icons on the right side of the Desktop instead of the left (Mac style) - Any time I add a new drive or a file is sent to the Desktop, however, I have to kill the terminal window to be able to click on the icon, then drag it back to the right side, then restart the terminal.
Is there any way to tweak GNOME so that these icons are added from the top right corner and down instead of from the top left, automatically?
have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
I'm looking for a software to compare two documents (for example .odt) side by side or highlighted in graphical way. I want to do the same as Word 2010 Compare Documents (see this: Microsoft Word 2010: View Two Documents Side By Side). I found in OpenOffice something a bit similar that, see in <Edit> -->> <Compare documents>, but it's not a good visual presentation. I'm looking for a software who give me the possibility to see the differences between two documents side by side, or highlighted.
I'm wondering how much of my currently installed packages I can transfer to a new system...I have a HDD split in two. I have 10.4 on one half (/dev/sda6) - my working system for the last year or so since my last upgrade - and I have just installed 11.04 on the other half (/dev/sda. I wanted to check out the new version rather than upgrading. note I have my home folder and all stored data on other drives (zfs mirrored disks) - the boot disk is mostly OS related... I can overwrite /dev/sda8 with impunity as long as /dev/sda6 is intact....
What I want to do is capture the wide variety of packages I have installed on the old version and install them onto the new system - without using the dist-upgrade mechanism... I've had it fail too many times leaving me with a complete rebuild being required... is this (partially) possible or have too many core packages changed? I was especially thinking of something like [URL]
trying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface auto lo iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
It used to be a sysadmin/yast setting wherein you configured the display.It is now done under "personal settings"-->"display" meaning ordinary users can set their own preferences. That's really nice and all, but I'd rather it be sysadmin-only than have to go through several minutes of futzing around with it every blasted time I login. So, how can I make side-by-side permanent either for myself or for all the people who use my system (just me)? Thank you.
This module is only for configuring systems with a single desktop spread across multiple monitors. You do not appear to have this configuration.Since I obviously do and since I can get the desktops to spread across the monitors (after futzing for several minutes).
I did a search but for this topic and I thought it would be discussed quite a bit, did not get any results. Maybe I did not use the correct words? Anyhow, I am running Kubuntu 9.04 and wish to switch to Ubuntu Karmic 9.10. I do still want to keep Kubuntu 9.04 as a boot up option temporarily in case I have major issues with Ubuntu. Ill also need to know how to get rid of Kubuntu after Im sure all is well with Ubuntu. Finally, there are a ton of boot options (different kernels Ive upgraded to) in Grub when Kubuntu boots up. How do I get rid of those? I also have a Windows XP partition that I boot into occasionally.
Just installed Ubuntu 10.04 on my home laptop after testing it (and loving it) on my work desktop just this morning. First time Ubuntu user and looking to be a long one, too.Anyways, I used the "install side-by-side" on both machines, but my laptop, with Vista, has a weird side effect. At the boot screen, I chose Windows Vista and it booted the recovery tool (I forgot the exact name). I was worried at first, but when I chose the actual Windows Recovery option below it to attempt to fix it, it booted Vista. So it seems in the process of partitioning the HDD for Ubuntu I somehow switched what each partition boots. Is there a way to correct this?
