Ubuntu Networking :: How To Backup Learned Wireless Connections
Aug 25, 2010
So my machine is doing a bunch of strange things and I want to reload it. But I would like to save some of my settings, the most important of which to me is the wireless networks that I've configured from all my customer sites. There are A LOT of them, and I don't remember all of the settings so it would be nice to migrate those to my new install without having to redo them one by one when I arrive at a customer site.
View 1 Replies
ADVERTISEMENT
Feb 7, 2010
I have been using Ubuntu for a couple of days now and I am starting to like it alot. I decided to install it on my laptop, but getting it to connect wireless is becoming a problem. I have been searching all day on how to fix this but nothing so far has helped.I had Windows 7 installed before and it connected fine.
View 1 Replies
View Related
Aug 21, 2010
So it snatched up this old Dell Inspiron 5100 with a WN511B wifi card. When I plug the card into the slot nothing happens and no wireless connections show up. Can someone walk me through on getting the wifi card to work?
View 1 Replies
View Related
Nov 10, 2010
I have an Acer AspireOne D255 netbook. I just installed Ubuntu Netbook Remix 10.10 and it looks pretty sweet.Right now, I'm on a wired connection. It's not detecting any networks, and I know at least my home wifi should show up (and usually we can get onto our neighbors!)I used to have a different model of an AspireOne (I think it was 531h but I'm not 100% sure) with UNR 10.04, and my network was detected right out of the box.
This reminds me of when I installed the desktop version of 10.04 on my iMac. I couldn't bring the wired connection to the room it was in, and my wifi didn't show up on it. I just gave up because I like my Mac so it wasn't a *huge* deal. but I definitely don't want to use this stupid Windows 7 Starter that comes on this netbook!
View 3 Replies
View Related
Feb 8, 2011
I went to get online on my laptop this morning, and have no connection. When i click on the icon up top in the task bar, it only shows vpn connection. It does not show ANY wireless connections at all. I checked, and the enable wireless is checked. It just does not pick up any connections.
View 3 Replies
View Related
May 31, 2011
I own an hp dv9000 laptop, it comes with a Broadcom STA Wireless card... I currently have my laptop connected to the internet through a wired connection, but there is no option at all for wireless.I've already installed the Additional Drivers to install the Broadcom STA Wireless Drivers, and after I reset, there was no difference, no option to choose wireless instead.
View 1 Replies
View Related
Jul 4, 2011
I'm working right now with ubuntu 11.04 on my asus ul30vt-x1, my wireless n network is working on a linksys e3000 router, my issue is basically with long file transfers. When the issue started i was reaching speeds of 100 Mbps through my wireless network even when I'm connected at 150 Mbps. However when at this speed, I don't know why, the connection is dropped after some minutes or even seconds. I made some testing on windows, I'm reaching 70 Mbps there and no problem at all with dropping the connection.
So my conclusion is that for some reason the linux driver, in my case, is not able to handle such speed of 100 Mbps. I know that a wireless network will have a throughput of aprox 60% the wireless speed. Right now im trying to apply traffic shapping to my transfers so i can get 70 to 80 Mbps, its being working so far.
View 1 Replies
View Related
Jul 8, 2010
New to ubuntu, my wired and wireless connection doesn't work.
View 9 Replies
View Related
Dec 10, 2010
Running Ubuntu 10.10 on a Dell 710m. Fresh install of OS yesterday. Initially I had wired connection but no wireless. So I started chasing threads & trying different downloads & commands [WITHOUT KNOWING essentially what I was doing; throw your rocks at me HERE] & now I have lost the wired connection also.
Also:
[a] If I go into System > Administration > Additional Drivers, I get "No proprietary drivers are in use on this system."
[b] As far as being able to copy a downloaded driver [using a working M$oft machine with net connection] onto an SD card & transferring that driver to the Dell laptop, I have tried formatting 3 different SD cards with the Dell, & each time I come up with various failure errors--& I have no idea why something as simple as formatting an SD card isn't working.
View 2 Replies
View Related
Jan 25, 2011
Can anyone tell me if there is a way to change the behavior of Network Manager, so that it will only automatically connect to certain wireless networks which I specify, and not automatically connect to others I may have previously used. For example, there are a lot of wifi networks called "linksys", and I don't want the program to automatically try to connect to whichever one it finds.If someone can tell me in which file(s) the list of these connections is stored, I might be able to write a script which will edit that list on startup.
View 1 Replies
View Related
Apr 22, 2011
i'm using a dell n5010 recently i installed ubuntu9.10 in my laptop and it doesn't seem to detect wireless connections, so, i googled it and downloaded a driver from broadcom and tried to install it as per the authors instructions and nothing seems to work well, the broadcom drivers are not detected in the additional drivers and when i try to install linux-wlan-ng tarballs it doesn't seem to work even, though i have gcc(i think thats it), so, i installed my windows driver through nsdgtk but it says that it is "unable to see if hardware is present" but, when i click ok on the error the wireless network applet says the hardware is present and when i click the network configuration tool it gives the error message "could not find a network configuration tool" and after configuring my network with network tools in administration it says "no wireless extensions" when i type 'iwconfig' and there is no ip address when i type "ipconfig".
View 9 Replies
View Related
Oct 21, 2010
I'm getting really tired of using windows, I love ubuntu but theres a big problem. I have a BTHomeHub2 and whats annoying is whenever I goto wireless connections there's only a bt home hub but its not my one. and I have tried connecting to hidden wireless network and nothing worked. I have a desktop pc with a usb plug in BT voyager that picks up the router but it will only find the one down the street not mine. It works fine when using Ethernet.
View 2 Replies
View Related
May 29, 2009
My current network setup at home is all wired, and that's worked for me so far. Now I want to set up a wireless connection on my Linux box that I can connect to with both my laptop and my Nintendo DS. I'd like to be able to host a wireless network from the Linux box, connect to it with some other wireless device, and have the wireless device communicate with the router, the internet, and other computers on the wired network. I have the wired network set up (statically configured) as eth0. Other network adapters present on the system are eth1 (not in use) and wlan0, wlan1, and wlan2 (identical cards, remnants from the last time I experimented with wireless).
So I guess my question comes in two parts:
1) How do I set up wlan0 such that it can host? Is Ad-hoc mode okay for this, or do I need to set it up in Master mode?
2) How do I forward connections between the wireless net and the router?
Note that I will be using WEP, as it is all that the NDS supports. I'd like to set up MAC filtering as well, but not until after I get something that works.
View 11 Replies
View Related
Dec 4, 2008
What I want is quite simple, I have my PC running Linux Mint 5 (Elyssa), and I would like to connect it to both an internal network, which has a file/print server, another machine and will soon host a small cluster. I also have a wireless router connected to the tinterweb.
The thing is using my ethernet I want to connect to the internal network whilst simultaneously using my wireless to deal with the internet, I want to keep the internal network off the net as it really doesn't need to be connected. I can connect to my internal quite happily and also my wireless but not both at once.
View 5 Replies
View Related
Jul 20, 2011
Just had an issue crop up where connecting wired network seems to stop wireless connections from getting an IP (happens on multiple networks both while the cable is plugged in and once it's been unplugged; also persists across reboots). Machine is a Dell Latitude 2120n with UnionFS running. Connection was working fine prior to the wired connection
View 3 Replies
View Related
Jun 29, 2009
I installed Nvidia drivers according to the post in HowTos section. It downloaded a different version of the existing kernel, i guess. And the kernel using which I downloaded, when shows up GUI, looks like a Safe Mode of Windows. So I boot the kernel that it downloaded. And there the problem is that in Network Manager applet, it doesn't show me the wireless connections. It doesn't even show the Enable Wireless checkbox upon right clicking it. How to get it back?
View 4 Replies
View Related
Jun 15, 2010
My wireless is flakey -- dropped connections, poor speed, etc. As diagnosis, I loaded the 'wavemon' utility so that I might watch the radio and signal and noise.Things will be good, then fall off, then get better, then go away entirely. Repeat continuously and randomly. For these experiments, my laptops -- more than one -- are on a table.The table is roughly 15-20 ft laterally from the access point. The access point is also 8 ft above the floor vs. 3 ft table height.(grin) While the signal "wobbles" everything else is mechanically stable and otherwise not moving.
View 11 Replies
View Related
Aug 20, 2011
An half year ago i reinstalled ubuntu 10.04, there both were no wired and no wireless connections.I have found drivers and it's everything ok with wireless, but i can't connect through LAN.
View 3 Replies
View Related
Jun 20, 2009
I'm trying to get wireless working in F10. Using pci wireless card with Atheros chipset. To be sure, I tested this hardware with a PCLinuxOS Live CD. Connects to AP perfectly.
Hardware drivers seem all OK in F10, and ifconfig shows wlan0 as expected. When I use the Wireless-Assistant 0.5.7 there's no connection.
Actually, the AP logs show numerous connections and disconnections.
Preferring CLI, I'm using a drop-dead simple wpa_supplicant.conf as follows :
Should Ipost some debugging output from wpa_supplicant -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0 -d
View 2 Replies
View Related
Jan 12, 2011
I recently installed ubuntu 10.4 LTS on my IBM T60 ThinkPad, (Love Ubuntu! Will Never go back to Windows)
But now the problem is as followed.: When i'm at work where they have an open (Non protected) WiFi spot i have no problems connecting at all. But as soon as i'm at home or with friends which have WEP/WPA/WPA2 encrypted routers it is impossible to connect, to none of them. not Linksys, not Dlink not Thomsom, simply none. For days i've been hunting the internet for information about this problem but it is impossible for me to find the solution. I've read the Wireless troubleshooting manual from Ubuntu and did all the checks and tests and everything seems fine. The card is an Intel 3945ABG, and in the new Linux Kernels its already pre-installed. It's so frustrating not beeing able to use the internet in a proper way..
Note:
I installed wireshark to experiment at my workplace but its finding nothing at all even though its connected to the internet/LAN Etherape works fine though.
View 9 Replies
View Related
May 10, 2011
Cross posted from the XBMC Forums. I know there's a whole lot of WTF surrounding the new IR setup and not a whole lot of documentation. This is what got it working for me. This is for kernel's 2.6.35+ and LIRC 0.9.0 and above.
Foreword: I've put off upgrading from Lucid because of the cluster that was LIRC in Kernel (and have not been shy about it). After Natty... I'm not happy about Natty, I'm going back to what every thing else in my house runs. A good proper Debian system. I've finally bit the bullet and started to figure out how to deal with LIRC in the Kernel, because it's not going away. Turns out, its just a little bit of awesome (and a whole lot of work.)
First you're going to need ir-keytable. It's available in natty (not maverick) and Sid & Testing. apt-get install ir-keytable. ir-keytable turns ... I'm not really sure what ir-keytable really does. But it turns remote presses into LIRC stuff.
This is the flow chart of fun. I'll try and work on this in order. lirc kernel -> ir-keytable mapping -> LIRC devinput -> lircmap.xml -> remote.xml. Do not install LIRC yet. Un-install it if you have it. Right now we're going to be futzing without it. Running ir-keytable by itself will dump out what IR receiver it recognizes in addition to what protocols it supports. I have a real HP receiver & Remote (ID 045e:006d Microsoft Corp. eHome Remote Control Keyboard keys)
[Code]...
View 5 Replies
View Related
May 2, 2010
My connection manager shows wired connections and shows wireless as being disabled. here is some terminal info getting wireless going?
Here is a bunch of things I have tried and the results.
nixon@nixon-desktop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
nixon@nixon-desktop:~$ sudo ifdown wlan0
ifdown: interface wlan0 not configured
[Code].....
View 9 Replies
View Related
May 31, 2011
I remember that I did configure my desktop PC for wired and wireless connections since openSUSE 11.2, 11.3 and 11.4. Currently I have openSUSE11.4 x86_64 KDE. Today I happen to notice that the icon for NetworkManager in the taskbar has been replaced with a red X. I discovered that Network Manager only shows VPN tab, whereas Wired and Wireless tabs are greyed out. The strange thing is I still have Internet connection with the CAT5 cable being plugged in. I can still configure wired and wireless connections via YAST but I cannot fix Network Manager settings.
View 9 Replies
View Related
Feb 7, 2011
have a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies
View Related
Dec 18, 2010
I have just installed Ubuntu 10.10 64bit on my laptop Toshiba Satellite A665-S6065 and I can connect to wired network but I can not connect to wireless network "Network Connections disconnected". Im following this post http://ubuntuforums.org/showthread.php?p=6183681
1. Machine Brand and Model (PC/Laptop): Toshiba Satellite A665-S6065
2. Wireless Brand, Model and Wireless Chipset:
Code:
lspci
Output:
Code:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
[Code]...
View 3 Replies
View Related
Jul 30, 2011
I am running Ubuntu 9.04 as a partition with windows 7 on a acer aspire 5742, I would like to connect to the internet in Ubuntu, wirelessly, but I am unable to turn my wireless on in Ubuntu, and network manager says "no network connections available". I have the following network adapters:
Atheros AR5B97 Wireless Network Adapter
Broadcom NetLink (TM) Gigabit Ethernet
Microsoft Virtual WiFi Miniport Adapter
View 9 Replies
View Related
Feb 12, 2010
I am trying to install my usb dongle for wireless connections but when I type the make command in it say's its not installed and I need to install it via
Quote:
sudo apt-get install make
the trouble is i need to first get the wirless connection up and running before I can download anything, does anyone have a suggestion or a work around.
View 2 Replies
View Related
May 7, 2010
I was having trouble with my wireless connection, it was dropping every 5 minutes or so after upgrading to 10.04 and ran across a thread where someone recommended entering
Code:
sudo apt-get install linux-backports-modules-wireless-lucid-generic
After entering the command I have lost all ability to even use my wireless ability even if it was for 5 minutes. Now I am using a different kernel, internet still drops every 5 minutes, but would love to get my internet up and running again.
I am using a Dell Studio XPS Laptop
Code:
*-network
description: Ethernet interface
product: MCP79 Ethernet
[Code]....
View 9 Replies
View Related
Jul 19, 2010
Took my laptop with me on a trip away and it didnt connect to the internet.
- Its running Ubuntu 10.04.
- It connects to my wireless here at home, but didn't connect properly to the internet in the b'n'b i stayed at.
- I have connected to that wireless before, but using windows, the last time i stayed there and the owners say they haven't had any problems with others using it.
- Although it was a weak signal, even moving the laptop right next to the router didnt help. The signal was stronger but no web pages loading, or any programs relying on an internet connection didnt work properly or at all.
- I took a seperate wireless USB thingy with me, but that wasn't recognised by Linux, its a Belkin USB adaptor, with N strength.
What could cause this? How come my laptop was the odd one out? How come it didnt recognise the Belkin USB adapter?
View 5 Replies
View Related
Mar 28, 2010
I installed Fedora 11. I am using HP dv4 series. But, I am not able to access any of the wireless connections.
View 4 Replies
View Related
