Ubuntu Networking :: Connect To Server Time Out Bug
Apr 16, 2010
I have a 64 bit machine that once makes a connection to a remote server, times out unless I am persistently doing some stuff on the computer. I have tried searching for a solution and have not found it yet I know it is a bug that other people have mentioned it at other places. This was not the case in previous versions of Ubuntu ( I am using 9.10). Having a persistent connection to remote server is something that is critical for my needs.
View 1 Replies
ADVERTISEMENT
Aug 18, 2011
I would like to connect to Linux Server remotely over LAN in graphical modeBut I need access for several users in real time. Everyone must have its own desktop.
View 2 Replies
View Related
Jul 22, 2010
I have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
View 6 Replies
View Related
Aug 6, 2011
I currently have a Nexxt Lynx 150 Wireless USB adapter attatched to one of my home destops to recieve my wifi signal, however, i have run into a speed bump in terms of getting it connected to my ubuntu 11.04. This adapter works perfectly in windows and on the ubuntu live cd, but, when i install ubuntu to my hard drive and try to connect to my network,
it just takes a very long time, then says, disconnected. My signal is WPA2-Personal protected. Here is a link to the adapter's home page > [URL] It seems to me that this is a driver problem. The cd that my adapter came with has drivers for linux on it, but i havent the slightest clue how to use them.
View 9 Replies
View Related
Apr 1, 2011
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
View 5 Replies
View Related
Jun 13, 2010
how to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies
View Related
Dec 12, 2010
I have 2 LAN ports. one from the motherboard (on board) and the other from a lan card i bought a few days back. one is use for browsing the net, the other for a media player.
problem is i cant connect to both the eth0 and eth1 at the same time. i have to disconnect one of them to connect to the other. and this really gets irritating as it doesnt always work as flawlessly as it should. what am i doing wrong?
Output of "ifconfig":
Quote:
I'm on ubuntu desktop 10.10 64 bit.
View 8 Replies
View Related
Apr 22, 2010
Since the upgrade from Lenny to Squeeze on my Notebook Toshiba Satellite Pro U200 with Intel Pro/Wireless 3945 ABG I have wireless connection problems.The connection breaks time to time and sometimes cannot connect automaticaly after restart. BTW I didn't change anything on the wireless or network configurations on the notebook and on the wiereless router.
View 8 Replies
View Related
Nov 11, 2010
I have an Ubuntu 10.10 (64 bit on a Dell PowerEdge T310) that cannot connect to the Internet. The network interfaces work fine because I can connect to our local network and to the firewall appliance. The network is controlled via DHCP. I have another Ubuntu 10.10 machine that connects to the internet without any issues, so I don't believe that it is a firewall issue.
Via networking tools, I am able to perform a lookup, so DNS appears to be working. When I perform a trace route, it makes it to my firewall and then returns "no reply" from there. In firefox, I time out on "connecting to ..." I also fail on any apt-get update calls. I've disabled ipv6 in Firefox with no effect. Ifconfig results and gateway route is all correct.
View 1 Replies
View Related
Feb 5, 2010
Jim wrote: FC12-x86_64/KDE
trying to connect to a NXserver across internet, it won't connect.I'm getting to this point at "time out"
203 NXSSH running with pid:2163
285 Enabling skip of SSH config files
285 Enabling check 0n switch command
285 Setting the preferred NX options
If I do a "ssh tom@76.254.20.238" I can connect to Server and tom /home. In ~/.nx the only two directories there is Config and Temp and in Temp there is three files , numbered 3112 6900 6903.
6900, 6903 can be read by user
3112 can only be read by 'ROOT'
Each Runlog is listed below[code].....
View 4 Replies
View Related
Apr 17, 2011
In Gnome Places->Connect To Server dialog, I am having problem using the Custom Location Service Type. I enter in the URI as
Code:
smb://username:password@ipaddress/share_name
I get an pop up error message that says:
Quote:
Cannot Connect To Server. You must enter a name for the server.
Which would be fine if there was actually a place for me to enter the name which there is not. What am I doing wrong. This is the first time I have tried using the Connect To Server dialog. Normally I just use a script I wrote to mount my share in a folder on my local drive as some programs cannot access the mounted network folder. In a browser all I have to do is:
Code:
smb://ipaddress/share_name
I tried using Windows Shares, but that did not work either. It does work if I click on network and access the share that way, but some programs like firefox and a few others that I want to save a file to my network drive do not show the network unless the share is mounted in a folder. So, I wrote a script:
Code:
#!/bin/sh
#mount ext storage drive
mount -t cifs //192.168.0.2/files -o username="username",password="password" /mnt/files
This works and I can use this, but it would be handy if I could just use the Connect To Server dialog.
View 3 Replies
View Related
Oct 26, 2010
I have an Ubuntu server that is currently running Ubuntu 8.10. I was thinking of making it a VPN server for my iPhone and also for my laptop whenever I'm outside and need to access internet over insecure wireless networks. Now that part should be easy I found several guides on how to configure OpenVPN server, as well as enabling clients on iPhone, and OSX.
However, the things is that my server is currently a OpenVPN client also, I have a paid tunnel set up to bypass my ISP blocking incoming traffic on various ports. Is it possible to keep this setting but still enabling a VPN server? Essentially causing traffic from my external device to go in through my tunnel to the VPN server, and then out through the external VPN provider.
View 2 Replies
View Related
Jun 21, 2010
Am using rhel5 server, in my server cbq time check was not working properly am using this cmd TIME=18:00-6:00;300Kbit/25Kbit,
View 1 Replies
View Related
Apr 4, 2010
I have a server which time zone is in GMT format. I have a user which is also get time zone variable in GMT. But I want to run script which will start from crontab in EST time zone. For that I�m not suppose to give extra entry in crontab. May be it would be in script.
How can I achieve this?
View 1 Replies
View Related
Mar 29, 2010
I have several file servers in our offices and I am relatively new to Ubuntu / Linux. I get notices that there are updates for the server software from time to time. Is it typical to update everything when available or should I follow "If it ain't broke, don't fix it..." mentality?I would hate for everything to be working fine and then have an update throw me a curve.
View 9 Replies
View Related
Oct 28, 2010
I want to synchronize my time to a time server in Singapore. How can i do so with the Time and Date in System - Administration - Time and Date?
View 4 Replies
View Related
Mar 22, 2010
I set up 9.10 as a file server at my house, connected through the router via LAN. I had everything working, using it as a Samba file server. I moved to to my college apartment and I am now having troubles... I changed the network information in /etc/networking/interfaces to what it should be (or at least I thought so...)
I can ping myself, but nothing else. Also, on my router configuration page, the server is coming up as a connected device with the correct IP address that I set it to.
View 3 Replies
View Related
May 13, 2010
My problem is that i cannot connect to anything that is running on this server via WAN. i can connect to everything from anywhere just fine through LAN though... i have all in use ports opened up on my router. i tryed messing with the ubuntu firewall and even tryed turning it off. but no luck. btw i am running ubuntu server 10.04 with matching desktop!
View 5 Replies
View Related
Oct 19, 2010
I just loaded NX Server, following the instructions from NoMachine. When I try to login from a client I get "Authentication Failed for User My Username" I can use the same client to connect to another NX Server on my network so I know the client works. I'm not clear if I need to set up a user, or if I can just logging with the username & password from the host (which is what I'm trying).
View 1 Replies
View Related
Feb 27, 2011
i cannot connect via WAN to my ubuntu server. Literally out of nowhere it stopped working. i could connect to my Ubuntu server via WAN alll night long without trouble.
Servers running Ubuntu Server 9.10
View 3 Replies
View Related
Mar 8, 2011
I just setup sshd server on my ubuntu server 10.10 today. I then tried to connect to it with putty on my windows laptop outside the lan but failed. I entered the ip address as my wan ip address and the port as 23 (same port on the ssh server. I also have port forwarding enabled. The connection timed out every time.There are a lot of guides about ssh reverse tunneling but none works.
View 8 Replies
View Related
Apr 25, 2011
Ok this may seem like a "USE SEARCH FUNCTION" Topic at first, but trust me i have.
So my problem is the following:
I installed Ubuntu Sever 10.10 on a old PC of mine and installed all the required stuff for a webserver (apache, sql, php, ftp, ssh, etc)
Our network system is one of these stupid kinds, it's a brigded connection to the ISP so every computer on our LAN gets its IP directly from the ISP and there is no local IP addresses (port forwarding isn't needed)
This might be relevant but our LAN is build as follows.
<<<<<<<<<<<<<<<<<< -----------Switch with WLAN ------- My laptop (WLAN)
<<<<<<<<<<<<<<<<<< |
Modem/router --------------
<<<<<<<<<<<<<<<<<< |<<<<<<<<<<<<<<<---- Windows 7 PC
<<<<<<<<<<<<<<<<<< -------------- Switch ----- |
<<<<<<<<<<<<<<<<<< |<<<<<<<<<<<<<<< --- Ubuntu Server
<<<<<<<<<<<<<<<<< 2 other PCs
My Windows 7 PC can at all times connect to the server over ssh, ftp and http, no problems. But my laptop, and my friend from his place can only connect to the server if I have recently connected with the Windows 7 PC.
If there is no connection for a while and i try to connect with laptop or from friends place the connection just times out...
View 4 Replies
View Related
Feb 21, 2011
I need to connect with a server apart from the server which I work on. What is the command for this?
View 5 Replies
View Related
Jun 28, 2011
we have a minor issue with time synchronization in proprietary equipment.the client needs to synchronize time with server, but not using NTP.it is not very important so doesn't need to be done often.the problem is that it won't synchronize. I can see the server is sending tcp packet with date&time, but the client ignores it.I suspect the problem is in format (manual specifies there are two possible options like MM: DD: YYYY and so on, but server seems to use some other)Is there an easy way to run some program in Linux Debian, to send that simple packet with correct date?
View 4 Replies
View Related
Aug 4, 2009
I am hosting two Virtual Servers both running Centos 5.3 on a host machine also running the same OS. The VM software in use is Xen, as supplied with the OS.The host machine's time and date is fine, however both Virtual Servers are running ahead of real time consitantly.Running /etc/init.d/ntpd restart will resolve the issue however one of these is running MailScanner and when the time suddenly goes backwards, sometimes by as much as an hour, it stops working properly.
View 1 Replies
View Related
Aug 4, 2010
Is there a way to connect to a samba share on the other side of a dynamic ssh tunnel?I like to use ssh -D 8080 <host> to access the network on the other side of a ssh session. For applications with their own proxy settings it seem to work really nice.In this particular case I'd like to use the 'Connect to server' feature in Ubuntu to connect a samba share through the tunnel, but I can't figure out how to make only that connecton use proxy settings.If I enforce system wide proxy settings the ssh tunnel will die, so that is not an option.
View 1 Replies
View Related
Aug 10, 2010
i installed ubuntu using wubi, and every time i open firefox it says it cant connect to ubuntu server.
View 9 Replies
View Related
Jan 31, 2011
I cannot get my server to connect to the internet. I have tried everything. I can talk to my local network so thats not a issue. I think it is my dns and gateway. I am trying to use open dns but do not know how to configure it. Here is my configuration now:
Interfaces:
auto lo
iface lo inet loopback
auto eth0
[code]....
View 4 Replies
View Related
Mar 8, 2011
My problem is that for some reason I can't connect to my MySQL on my server.I know it's not the script, other than the information that I'm using to connect.The MySQL server is set to "localhost" so I set the host in my php script to "localhost".I check for the username and they say I should try "root" so I set the username to "root".Then I put in my root password.When I go to where my php script actually starts, it gives me the error saying that I cannot connect. I know the rest of the script works and the error refers to the info I'm using to go in
View 9 Replies
View Related
Apr 5, 2011
I'm trying to connect to a PPTP VPN service located in UK (I think) and everything seems to set to the right values. I've checked and double checked the gateway address, user name and password. But every time all I get is a brief message 'vpn connection XXXX failed'. Is there any way to know what is wrong? Is there any log file, or is it possible to connect to a VPN server from the terminal?
View 1 Replies
View Related
