I have a server which time zone is in GMT format. I have a user which is also get time zone variable in GMT. But I want to run script which will start from crontab in EST time zone. For that I�m not suppose to give extra entry in crontab. May be it would be in script.
How can I achieve this?
There are many time zone files accessible from the command line that don'thow up in the GUI ("system-config-time"). How do I add these time zones to the GUI
View 1 Replies View RelatedI want to change my time zone (not time, but the time zone). Just as an experiment.
I am GMT.
I go to /etc/timezone and enter US/Eastern.
I know that Gmail uses JavaScript to check the computers time zone (not the time). Therefore if I sent an e-mail from Gmail to myself at Gmail it should show the new time.
But it does not. It shows my GMT. Obviously Eastern time is behind GMT.
(The same happens if I just change the time using date -u). Gmail shows the GMT rather than the time a certain number of hours behind the GMT.
How can I set the time zone on my computer so that webmail like Gmail recognises the new time zone?
I have set up a master DNS server at 192.168.50.9 and a slave DNS at 192.168.50.6. Both servers are BIND9.Machines are for testing/experimenting, hence the IP addresses. Initially, the zone transfer was blocked by the firewall on the master, as the slave uses randomly selected non-privileged ports for zone-transfer query. So, as far as I understand, there are two possible approaches:
1. Allow connections based on source, which should be
Code:
-A RH-Firewall-1-INPUT -p tcp -m state --state NEW,ESTABLISHED -s 192.168.50.6 --sport 1024:65535 --dport 53 -j ACCEPT
(and it works for me fine)
2. Allow ESTABLISHED and RELATED connections, which would be something like
Code:
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
which was my initial idea but didn't work, but has inspired me to dig deeper into firewall configuration topics :).
Question: Does zone change notification message count for opening a dialog, or notification from master and slave zone update request are two absolutely separate actions? If the latter is true, that, of course, explains why option #2 didn't work.
since the upgrade tzdata (2011c-0ubuntu0.10.04) to 2011d-0ubuntu0.10.04which I installed on Saturday, ntp updates seem to put me in GMT time.I've switched to manual time settings, as it does horrific things to my mythtv database!I'm not sure if its the upgrade, or the ntp time servers. My timezone is Australia/Tasmania.
View 2 Replies View RelatedI have Squeeze with xfce desktop installed.
Howto set a "Time Zone" under xfce or which additional package should be installed to do that?
I want to to change my time zone from PKT to GMT but when I do it from setup command it give the following error:
Traceback (most recent call last):
File "/usr/share/system-config-date/timeconfig.py", line 112, in ?
runConfig(rc)
[code]...
My server is in CDT. I want to run one script @9.30am of EST5EDT
View 4 Replies View RelatedMy time zone is set right. I look at yest. And it set to the right time zone. But it said 02:04 am. When it should be about 19:07 PM! I'm not sure what to do. As for my language problem. I'm not sure. Took a look at yest again. But I'm having a ton of spelling error. How to do it.
View 9 Replies View RelatedI have a script to record a weekly radio show from a Sydney radio station.I am in Brisbane.Sydney and Brisbane are both in the same time zone but Sydney(NSW) bounces around on daylight savings time and Brisbane(QLD) does not. Is there a way to specify a timezone for a specific job in the crontab file? If so what would be the format for Sydney so it follows the daylight savings time changes? Right now I will just change the cron schedule when Sydney goes on and off DST.
View 9 Replies View RelatedHow do I amend the time zone in my profile please?
I entered "London" but the page reverted back to its probable default -5GMT.
I'm looking for a function (prefer POSIX, but Linux specific would do if it has to) to get the current timezone offset. For my location, eastern USA, that should be -14400 when daylight time is in effect, and -18000 otherwise.
View 1 Replies View RelatedI have a server running ArchLinux; I recently installed openntpd on it. Since I started paying closer attention to the clock, I started noticing other things; specifically when I run the "date" command, it's returned in PST when it should be "EST":
[spice@sandbox ~]$ date
Sat Mar 6 00:17:42 PST 2010
I have set the hwclock to localtime, configured "HARDWARECLOCK" to "localtime" in rc.conf, and chosen two different (but accurate) values for TIMEZONE in rc.conf:
[spice@sandbox ~]$ hwclock
Sat 06 Mar 2010 03:17:38 AM PST -0.922220 seconds
[spice@sandbox ~]$ cat /etc/rc.conf | grep TIMEZONE
TIMEZONE="US/Eastern"
[spice@sandbox ~]$ cat /etc/rc.conf | grep HARDWARE
HARDWARECLOCK="localtime"
However, as you can see, "hwclock" and "date" both say they're showing PST, although hwclock is showing the time in EST. I am not sure whether this was the case before installing openntpd. Is there another place where I should be setting the time zone?
time zone data not retrivable for update
View 1 Replies View RelatedAttempting to install 10.04... I can get to the "Where are you?" screen, then the little circular "please wait" cursor spins forever and ever.
Here are a few things I've tried, with no success:Leaving it alone for hours, hoping it was just taking a really long time. No Dice. Unplugging any hardware that might be causing a problem, including the network card. No dice. Burning it to CD, DVD, and booting from a USB key. No dice. Trying every combination of kernel options I could find in the forums, and setting most combinations found in the "more options" menu in the boot screen. No dice. Booting into the live environment, then installing from there (instead of just choosing "install" directly). No Dice. Booting both from the 32-bit and 64-bit ISOs (my machine is 64-bit)
Note: I have not tried just upgrading from my 9.10 install, and I will not try this. If I can't get a live CD to boot, there's no way I would voluntarily hose my current system by upgrading.
Also note: I checked the MD5 of the ISO, and did the "check the disk for defects" menu option as well. Everything checks out fine.
I frequently travel between San Diego and Boston. I am able to add "Locations" to Gnome's Clock applet, which seems like it should take care of time zone information (see attached screenshot). However, I can't figure out how to set one (or the other) as my current location so that it will update my time zone information.
View 4 Replies View RelatedI just installed antix. It asked for time zones and I set all of that up but it is 3hrs off. My computer clock is correct, why can't I just set up antix to recognize my computer clock? Or why doesn't it just use that as a default?
View 7 Replies View RelatedI have 2 web servers running apache hosted at 2 data centres on 2 different IP ranges.The 2 servers are an exact clone of each other hosting www.example.com.What I am trying to achieve automatic failover. Say my first data centre gets wiped out, how would customers reach my website on my second server in the second data centre by still typing www.example.com?The aim is for the customer not to notice any difference.
View 3 Replies View RelatedI run a few sendmail servers that run MailScanner/Spamassassin/sendmail (current versions) on Centos 5.4 and Centos 4.8 These boxes accept mail for a large number of domains (6000+) scan the mail removing spam and then forward the ham to another server for delivery. I am attempting to stop any backscatter that these servers cause by only accepting mail for specific users@domain or for domains with a catch-all account.I currently use /etc/ mail/ access.db as the access map for the domains, but this allows all mail to be accepted for the domain before the attempting to send it on for final delivery which causes NDR and backscatter for those domains which do not have a catch-all account.
I have looked at adding "To:user@domain RELAY" to the access mapand also adding "define(`_RELAY_FULL_ADDR_', `1') " in the sendmail.mc and running make -C /etc/mail but this has no effect on the sendmail.cf file. My understanding is that if I can get sendmail to accept this undocumented feature then all will be fine as I will be able to use the access map to allow mail to those specific users as well as entries of the type "domain RELAY".My second question is: Does anyone have any ideas on how to utilise access map and relay-domains to achieve the same thing?
How do the big companies, like Amazon, Google and the like, handle High network Availability? But if that is down, or extremely busy, it will send me to a different IP. Even if the address is cached, it still seems to force a change.How do I achieve this? Is there a High Availability, Resource Monitoring, Round Robin DNS changing service or something?
View 1 Replies View RelatedI found a way to change the kernel time zone with the following command
$ ln -sf /usr/share/zoneinfo/* /etc/localtime
After I tried it and checked the kernel time zone, but it didn't changed.
It seemed to be applied after rebooting.
Is there any way to change the kernel time zone "dynamically" with the
console command, not with the GUI environment?
Kmail 1.13.2 Problem on startup, error is from nepomuk, data storage. "cannot find Redland backend, nepomuk is disabled until fixed. Also see the following error from the akonadi console:
100503 10:00:15 [Note] Plugin 'ndbcluster' is disabled.
100503 10:00:15 InnoDB: Started; log sequence number 0 31413862
100503 10:00:15 [Warning] Can't open and lock time zone table: Table
'mysql.time_zone_leap_second' doesn't exist trying to live without
[code]....
1.How create a Zone file
2.Named.conf file conf...
3.Dig check is not working......
I am wanting assistance with getting Zoneminder working under ubuntu 11.04.I have ran the install and setup the settings via http://ipaddress/zmadded the camera re instructions.I cannot view anything via Zone Minder.Cam is a Logitech Pro 5000
View 13 Replies View RelatedThe thing is, I've created a new local zone here (called "local.lan"), and, aparently, it is working fine, and DHCP3-SERVER is updating DNS info through the controls.But sometimes I get some strange answers from the server, like when I do the "arp" command in one of the clients, and get the server's hostname "mixed" with it's own reverse, like this: "dns.local.lan.2.168. | ether | 00:02:1e:f5:61:74 | C | eth0". Other thing is that sometimes my DNS don't update when a computer "enters" the lan. In the /var/log/syslog the DHCPOFFER appears, but the information about the DNS update isn't there.So, I would like to show you my named.conf file and my local zone db file, and get some feedback from you (what would you change... what is wrong...).
# ------------------- #
* named.conf:
# ------------------- #
[code]....
how to configure reverse zone for x.x.x.x/18 subnet ,all the example on the internet are for /24 or /16 subnets?
View 9 Replies View RelatedI am no expert when it comes to BIND. I seem to be able to resolve NS and A and TXT records for my domain, but I cannot get the MX records to come out. Does anyone have an idea what might be wrong with my BIND zone file? I wonder if it might have something to do with the fact that my IP is currently on a policy Block List?
Code:
I want to compare zone file counting and same name, not records etc of master and slave dns server so that i sure both server contains same copy of the files at a time. Any utility to compare such files in linux?
View 5 Replies View RelatedThis is the entry which iam seeing in my /var/log/messages. code...
because of the issue now i cant able to write the zone file, via my application. automatically..is it possible to resolve this issue!
I need to script to change TTL of all zone file in my DNS and aslo i require the serial to be updated to reduce my work load.
View 2 Replies View Related