Debian :: Bridge Setup - Cannot Connect To Any Wireless Networks
Apr 12, 2011
I am a (somewhat) newbie to Linux (but have an extensive Windows background), and I have just installed Debian Squeeze in an old EeePc 701 4G using the netinst version only with the following packages:
eeepc-acpi-scripts
x-window-manager
gnome-session
gdm
gnome-themes
gnome-themes-extra
plymouth
bridge-utils
Now I would like to install Debian in my main laptop, but I think it won't be able to connect to any wireless networks during setup and before installing firmware-brcm80211 and wireless-tools (its wireless card is a Broadcom 43224AG). That being, and to avoid connecting the computer directly to the router (it is not easy), I would like to bridge the EeePc's wireless connection to my laptop using a cable. I tried using the instructions found at the Debian Wiki, but I couldn't set it up properly.
View 1 Replies
ADVERTISEMENT
Jan 30, 2011
[PC]--(wire)--[Router1]--(wire)--[Laptop]==(wireless)==[Router2]::[Internet]
My setup is above, I hope it comes out OK on this forum, and someone can understand what its supposed to be! My problem is I am not sure how to get [PC] to be able to see [Internet]. From [Laptop] I can get both networks to work, and have tried using brctl to bridge them, but as soon as I do "ifconfig br0 up" neither network... works anymore (cant ping either router).
View 2 Replies
View Related
May 11, 2011
I've got Debian wheezy running on my Lenovo Thinkpad X220.Kernel is 2.6.38 with compat-wireless modules.Trying to connect with an wireless network fails every time -even on unsecured networks.
dmesg output:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to xx:xx:xx:xx:xx:xx (try 1/3)
[code]...
View 9 Replies
View Related
Mar 10, 2011
I installed Debian sid recently. I installed the B43 driver and wireless is working just fine at home and elsewhere. I can't connect to the wireless networks at school though. There are two networks, one is unsecured (and you have to enter your login details after connecting - I can't connect at all though), the other is secured. I was previously using Ubuntu, with network manager, and I have all my settings the same for the secured network as I did in Ubuntu. In Ubuntu I can connect to both networks just fine. In Debian I can't.
View 7 Replies
View Related
May 25, 2011
I installed wheezy on my Acer Aspire One netbook and am unable to connect to wireless networks.Output of lspci shows this as my wireless card:
Quote:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I installed the firmware-atheros package to get the card up and running. Output of iwconfig shows I have a working interface:Quote:
root@netbook:/home/eric/Desktop# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
[Code]...
View 14 Replies
View Related
Feb 26, 2010
I use network-manager-gnome to connect to my wireless networks, but I can only use it with a graphical environment, and it doesn't even work that well since it will drop the connection after a few minutes and I have to reconnect it manually, that means I cannot leave my computer downloading a big file all night since it will only download for a few minutes, does anyone know what package can I use to connect to my wireless without the need of network-manager, even if it's through command line?
View 9 Replies
View Related
Jan 13, 2011
I've two networks (network 1 in the apartment, network 2 in the basement/server room) I would like to build a vpn connection between the two networks. In networks 1 I have a 24h running PC/Firewall/Debian Server. For network 2 I would like to buy a RVS4000. Is it possible to connect the two objects (Debian and Cisco)?
View 2 Replies
View Related
Dec 8, 2008
I want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.
View 3 Replies
View Related
Nov 12, 2010
just downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?
View 4 Replies
View Related
Sep 2, 2009
I am fairly new to linux, I getting to grips with the offline and I am starting to be converted. The major problem I have is that I cannot get it to connect to my wireless network. I am using Fedora and my wireless card is the Belkin Wireless G Desktop Network Card - F5D7000uk (version 3000uk).
I am able to see the network and pick up the essid automatically through networkmanager or iwlist scan. I have tried to connect using Network manager:
- it picks up the information and I submit my WEP key and the icon top right shows two green dots with a blue flame(?) rotating between them for a few minutes before asking for my key again.
And using the terminal commands.
Code:
$ sudo iwconfig wlan0 mode managed
$ sudo iwconfig wlan0 essid "BTHomeHub3-12GT"
$ sudo iwconfig wlan0 key 563865428
then tried to test the connection using
Code:
$ sudo ping www.bbc.co.uk
ping: unknown host www.bbc.co.uk
Code:
sudo iwconfig wlan0
wlan0
IEEE 802.11bg ESSID:"BTHomeHub3-12GT"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management: off
Link Quality: 0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
View 3 Replies
View Related
Dec 31, 2010
I want to add a user that can connect to wireless networks, use all the video and audio stuff etcetera.
i know to use the User and Group management application for that. but how do i enable their use of the wifi, video and audio stuff please?
View 2 Replies
View Related
Jul 5, 2010
Well the thing is i cannot connect to a wireless network, when i log in the nm-applet won't show, if i wait about 20 minutes it will show .. and if i clicked on it requires a password, when i enter the password it freezes!! i tried uninstalling the nm-applet and reinstalling it, didnt work
View 5 Replies
View Related
May 22, 2011
While staying at a hotel that offered wireless Internet connection connection I was not able to access their network. I contacted their technical support 800 number and was told that the north building server had been down for 26 hours. I moved to a south builing room. Same problem. I went to McDonald's, which had wi-fi connection. Same thing. My laptop was not able to make a connection.
My question is as follow:
How do I find out:
1) whether it is a problem with my new Ubuntu version (10.04)?
2) my wireless card in my laptop is no longer working? Are there any tests that I can run?
View 2 Replies
View Related
Nov 29, 2010
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
View 4 Replies
View Related
Dec 24, 2009
Since my update to OpenSuse 11.2 knetworkmanager refuses to connect to WEP enabled networks (worked fine with knetworkmanager 11.1). I am sure that I use the correct password and I tried on 3 different networks. The manager is connecting to open networks and WAP protected networks without problems. I saw on other forums that there were similar problems with previous versions of networkmanager. But I could not find a solution for my problem.
View 9 Replies
View Related
Sep 9, 2010
I just installed OpenSuSE 11.3 x86_64, and as I'm new to OpenSuSE I can't get my wireless to work. I believe it should work because it worked out of the box in Ubuntu (9.10 and 10.04)
At first I didn't see any network icon in the notification area, but after some googling figured out to enable NetworkManager instead of ifup. Now there is an icon, and clicking it I can see wireless networks, but when I try to connect it tries for a while, then seems to give up.
/sbin/lspci gives
Code:
Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter PCI-Express) (rev 01)
/sbin/lspci -n gives
Code:
168c:002a (rev 01)
[Code].....
View 3 Replies
View Related
Jul 19, 2011
I have brought my son a samsung n150 mini laptop. It has a "realtek rtl8192e wireless lan 802.11n pci-e nic" card fitted to it. I have tried downloading the drivers from samsung and realtek, but still can't get it to connect. It see's the local connections but when i try to connect it says it is unable to.
View 1 Replies
View Related
Mar 23, 2010
I have a machine running Xubuntu [2.6.22-14-generic]. I have been trying to get this machine connected to wireless for ages, and I'm having another stab at it. So far I have install ndiswrapper and loaded the driver for a Linksys wireless adapter. The output of 'ndiswrapper -l' reports:
Code:
wusb11v4 : driver installed
devoce (13B1: 000B) present
So as far as my newbie knowledge goes, I believe that step to be completed, correct?When I turn on the machine is type in
Code:
sudo sh
modprobe ndiswrapper
to get the card running to where it will appear in the iwconfig dialog.The commands 'iwlist wlan0 scan' will list all the wireless networks around me, but I have been un-able to connect to any network, even unencrypted ones. I have tried to connect both through Wicd and command-line to no avail. For command-line I have used:
Code:
sudo ifconfig wlan0 down
sudo dhclient -r wlan0
sudo ifconfig wlan0 up
[code]....
With the final 'dhclient wlan0' commands, the following is returned:
Code:
There is already a pid file /var/run/dhclient.pid with pid 134519120
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium
[code].....
I have attempted to go ahead a step further and connect to an encrypted wireless network, however, I receive the same message, as well as another error message upon trying to enter the key, with the following code:
Code:
iwconfig wlan0 key s:"thekey"
Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument.
View 3 Replies
View Related
Jun 30, 2010
I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.
View 2 Replies
View Related
Aug 1, 2010
I have a WLAN Driver Azure Wave AW-NU222 Wireless LAN Card in my Medion computer.
After installing Ubuntu it seems to detect the wireless networks in my area. However, when I try to connect to my network, it tries for several minutes and then times out with no error message. I have set up the credentials and also tried removing the encryption (WPA-PSK) from the network itself, but it still doesn't connect.
Connect via an Ethernet cable is fine, and I know that the network is good because I can connect via my Windows Laptop and various other wireless devices.
I suspect it's due to drivers, but I'm having trouble downloading a driver which I can try and install using Ndiswrapper. The Medion website just a windows executable when I try and download the driver specific to my machine when I really need the .inf file.
View 6 Replies
View Related
Sep 27, 2010
Here is a situation I have never come across (though I have only been using linux since 2004).I am running ubuntu 10.04 and using Wicd Network Manager.I can connect to my WPA encrypted home network, but if I go to my coffee shop to use their unencrypted wifi - I cannot.Even using the terminal. I think it is the way the device sees the network - but I don't know how to fix it.I have a screenshot with wicd here:And one with connecting to the essid here:Afterwhich, dhclient was unable to obtain an ipaddress - just like wicd above.
My iphone connected to this network easily without encryption or needing to use the browser to authenticate, etc.Any ideas on how to fix this?Specs:Samsung NC10lspci:
Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[code]....
View 3 Replies
View Related
Oct 6, 2010
I have a HP Mini1000 and recently switched over to Ubuntu. I followed the directions found here:[URL] However, I still cannot connect to wireless networks though my card seems to be scanning for them and finding them. I have tried connecting to open networks and ones that require authentication.
View 1 Replies
View Related
May 8, 2011
Got Ubuntu 11.4 installed on my Lenovo Thinkpad X220.Except very very rare cases i'm not able to establish awlan connection.Scanning is possible at all times, monitor mode works as well.Network Controler (lspci)
Code:
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
[code]....
View 4 Replies
View Related
May 20, 2011
So I was the one who couldn't get their ethernet port to function properly. Most likely, this was the result of bad hardware since none of the community's suggestions for software fixes did anything. I believe this is probably true.Indeed, when I bought a cheap $10 wireless USB dongle, it immediately worked better than all the previous things. It detected networks, displayed network strength and even allowed me to attempt login.
The only problem now seems to be that it cannot login. I've rechecked the password countless times, but it just shows the 'connecting to wireless' animation for a minute or two and then poops out and says, 'disconnected'.I assume if everything is getting me this far, the driver is not the problem with the device. Is this a safe assumption?
View 2 Replies
View Related
Jan 13, 2010
I bought a Letux 400 mini netbook and it works fine except for wireless Ethernet. It finds wireless networks, including mine, and then pretends to connect, after asking for a password, but finally never connects. I tried reconfiguring the wireless network from g to b/g and finally to b only, but nothing changed. Cable connection works. Unfortunately all relevant Letux Web pages are hopelessly slow and certainly too slow to use the forum and ask questions there. why the thing doesn't connect and how to make it connect? If it recognises networks, shouldn't it be able to connect as well?
View 1 Replies
View Related
May 30, 2010
I've installed it no problems on my desktop and I really love it. Now I'm trying to install it on my Satellite and I'm having a couple of problems. When trying to connect to my wireless network, I can see my network, but it will just keep asking me for my WEP. I've confirmed that there is nothing wrong with the network or the password I've provided. Sometimes when I boot up, the network manager just says that the wireless networks are disconnected and can't find any. The wired connection always works just fine.
Here are the system specs:
Toshiba Satellite M45 S169
Ubuntu 10.04 Lucid Lynx LTS Fresh Install
Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
Kernel driver in use: ath5k
Kernel Modules: ath5k
View 3 Replies
View Related
Nov 27, 2010
I have been trying to connect to a wireless network and cant get farther than the network settings window. I can do just about anything with WIN XP but decided Ubuntu was 100x better and more stable. I can't get Ubuntu to search for Wireless networks or connect to one i typed in manually.
For any one who wants to know: I am using a...
HP Probook 6555b (laptop)
2Gb RAM
160Gb HDD
a/g/n wireless + BT
XP PRO running side by side with UBUNTU desktop 10.04 LTS
2.09Gh AMD II P320
32-Bit system
and FYI: I know "geek-speak" so no need to dumb-down or explain basic stuff.
View 7 Replies
View Related
Jan 2, 2011
so my wireless isn't working. My netbook wireless detects the available networks but when I try to connect it doesn't. The box that asks me to put in the password occasionally shows up but it still doesn't load. I even tried re-installing Ubuntu and didn't fix anything.I'm using kernel version 2.6.35-22-generic and
Code:
*-network
description: Ethernet interface
[code]...
View 7 Replies
View Related
Jul 27, 2011
New Ubuntu user here, and I'm having difficulties connecting to my router at home. I've searched around the forum for a couple of hours now, to no avail. My router was originally not broadcasting ssid, so I turned broadcasting on. Now I can see the router, but when I enter a password (which I know is correct) nothing gets connected.
View 9 Replies
View Related
Aug 11, 2009
My wireless network is being detected but it refuses to connect to it. I am entering the accurate passcode and I have tried doing various commands for it to work, but it is being stubborn.
Also, it would help to know which WEP Index to use and type of Authentication.
View 1 Replies
View Related
