about 90 percent of the time, i cannot connect to the internet. i click on the icon and select the network, but for some reason, instead of saying, "connection established", it says, "you are now disconnected."
View 2 Replies
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedSo recently we switched Internet Providers. While we had Bellsouth, my laptop would connect to our wireless internet flawlessly everytime. However, we just switched to Charter because it was both cheaper and faster. But now, my laptop will not connect to our wireless. If I hook it up to an Ethernet cord, it connects just fine. I believe they gave us a new modem/router or whatever it is that sends out the wifi signal.
I have tried to connect with this laptop on Ubuntu, Linux Mint, and Backtrack 4. On Ubuntu and Linux Mint, after I enter the correct WEP key, it sits there and tried to connect for a minute or two, but then the window pops up asking for the WEP key again, even though it's still filled out.
When I tried connecting on Backtrack, it told me that it could not obtain an IP address.
i was fed up after i can't connect to wifi using ubuntu. the problem happened after my router is being replaced to a new one because the old one got struck by lightning. good thing i dual-boot my laptop so i can access the internet using Windows 7 now.
i use the default network manager to connect to wifi before, but it all seem to be failed after the replacement of router. i also used Wicd but it failed to connect either. it says in the notification "disconnected: bad password" but the password was right. my wifi used WEP password with open authentication.
i even remove the WEP password and try to connect, but it failed. all i can do is to boot in windows 7 and surf internet there. what could cause this problem? is it the router, the telephone line? i can set the router settings if i want, but i don't know what causes the problem.
I just installed Ubuntu on my laptop and I found that I cannot connect to my school's wifi network while i have no problem connecting using windows. Also I can connect to my home's wifi network. The details of the wifi network are as follow:
SSID: Universities WiFi
Authentication: WPA
Data Encryption: TKIP
EAP Type: PEAP (EAP-MSCHAPv2)
[Code].....
I have downloaded the certifate required and put it in my home directory and selected that .cer when setting up the connection But I still can't connect to it
I have a Fedora Box with chillispot loaded for a captive protal wifi network. I am needing my office lan to connect to a controller on the WIFI network. I have tried many different firewall rules and have only momentarly able to ping something on the other network. here's some configuration info and my firewall rules that I thought should work.
FC 4
ETH0 - WAN (office lan 192.168.24.201/24)
ETH1 - LAN (brought up as 192.168.10.1/24)
tun0 - chilli 192.168.240.1
[Code].....
Im trying to connect to my wireless network via terminal. My wifi network has a WPA2 encription. Im running ubuntu server 10.04. wifi interfaces are active, i can "see" my network with airodump. The only thing is i dont really know how to configure my iwconfig to connect to it.
View 2 Replies View RelatedI got my netbook in the mail yesterday, opened it up, logged in, and Windows 7 was installed. Being a Windows hater my whole life, I followed a friend's advice and downloaded Ubuntu netbook, made a USB drive, changed the BIOS settings, all that. Here's when the stupidity occurs--I decided to go ahead and install Ubuntu without trying it, and to delete Windows to do so. A couple minutes later I realized that was a really, really stupid idea, so in a panic I turned my netbook off. I turned it back on and it was still on install but not really moving, so I powered off and on again and went back to the "Try Ubuntu" or "Install Ubuntu" choice screen. I chose "Try Ubuntu" and found that it did not recognize my home wifi network or ask me to join--or any wifi network, for that matter.
Now, it did recognize my wifi network the few minutes I spent on Windows 7, so I tried to change the BIOS settings back to where I could just use that until I figured out the problem. But no matter which setting I tried (HDD/SDD just gives me a black screen, and FDD and LAN do the same as the USB drive), I can't get back to Windows, so I guess I did delete it. Which leaves me with a netbook that can only connect to the internet via ethernet cable. Which kind of defeats the purpose.
Questions I should answer:
1. How am I trying to get online? My home's wireless network. We have a router. All the other laptops in the house connect fine.
2. Who is my internet service provider (and in which country?) COX, United States.
3. Can you get online with any other method? Yes, the internet works fine with an ethernet cable.
4. How am I getting online to post in this forum? My parent's laptop.
5. What hardware are you using? Toshiba N505 netbook and a router. I can give more information about the router if you need it, but I doubt it's the program since the other laptops are fine.
Give me one moment and I will add some code that it gives me when I put in the commands this website tells me to.My two final questions are:
1. Is there any way to recover Windows without buying it again?
2. How can I get Ubuntu to connect to my home wifi network?
EDIT: Here's some code. I have no idea what it means, but hopefully you do.
To run a command as administrator (user "root"), use "sudo <command>".See "man sudo_root" for details.
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller[code]......
I have just installed ubuntu 10.10 but my problem is i am able to coonect wifi network but sites are not opening so where is problem
View 1 Replies View RelatedI just installed Fedora 13 64bit Gnome, but I can't connect to the internet for some odd reason.
If you look at the image below:
I have marked the network icon, but on my desktop I don't have that icon for some reason...
Since I'm new @ Linux(Picking it up again) I went to the services and checked 2 services:
The network manager service was running but the status said: This service is dead.
And the network service was also running but status was: The status of this service is unknown.
I also went to the Administration menu and checked Network, the first tab showed no devices, but when I went to the hardware tab it did show my card.
I also don't believe that this is hardware problem since the card worked just fine under Fedora 9 or 10(Don't remember).
So if anyone got some solutions for me it would be great...
Some related hardware info:
lsusb
Code:
Code:
I have been an Ubuntu user for a year or so. My level is still ultra n00b but I am trying. Whenever I update Ubuntu there is always a WiFi problem, always. So now I am having problems getting wifi to work in 10.10. In Network Manager I can view wifi networks fine but I cannot connect. I tried with wicd also but I got as far as "getting ip" and then it would hang up.
lspci
Code:
Code:
Code:
I am not sure what driver I am using as I don't know how to exactly ID my driver. I know there is a way to ID the driver using airodump-ng but I have yet to find it.
I have a feeling this is a driver issue as one time I was able to establish a connection that then dropped a few minutes later. I have a feeling I should be disabling/removing the current driver and replacing it with ipw3945 or possibly a driver ndiswrapped? The problem is I cannot figure out how to remove the current driver.
I was going to switch back to 9.04 but I thought I would try to manually figure this one out instead of taking the easy way.
I am running Ubuntu 10.10 Netbook Remix on a Toshiba Netbook NB300. After performing an upgrade I find myself unable to connect to my wirless network and have lost the wifi icon in the task bar. Ethernet connectivity is however working.
iwconfig shows:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
ifconfig shows
[Code]...
I need to take to bring back wireless connectivity to my netbook and restore the wifi icon to the task bar.
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I'm a long-time Ubuntu user, and setting up my connection was as easy as putting in my WEP key, and that was it!
I installed Kubuntu 11.04, and it's really difficult. I located my wireless network, and after putting in my WEP key, it just says " Setting Network Address", while prompting me to re-enter my WEP/Hex key. After repeatedly entering the password, I get a red circle/slash icon in lieu of the network icon.
I need to know what is BSSID.. I want to connet it but I have problems with this...? Where I should to find that code..? or what is it...?
View 3 Replies View RelatedI can not connect to wifi networks, i can see them but not connect.
My wifi device is:
I've been using Ubuntu 10.10 for 2 days and there's one problem left to solve. It cannot connect to my home encrypted wifi but it has no problem connecting to open wifi. I used this site [URL] to change my wifipassword but it still doesn't work. Interestingly my Windows partition connects to it without any change so I don't even know if I'm really changing the password. The router is a Linksys WRT54G2. How can I change the wifi password, know what it is, and make sure Ubuntu knows how to connect to it?
View 2 Replies View RelatedWhen i click the networks icon on the toolbar, these options popup:
Wired Network - (disconnected)
Wireless Networks (device not ready--firmware missing)
VPN Connections
I can click VPN connections and that's it. How do i get the firmware needed to connect to a wireless network?
It's tooken me this long to get Ubuntu and now I can't connect T_T
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies View RelatedI just installed ubuntu server, and I need to use a usb wifi thingy for it, but it refuses to connect. The computer recognizes the wifi, and I can even do "sudo iwlist scan" and see my wifi network, but I can't figure out how to connect.
View 1 Replies View RelatedIs it necessary to have a wired connection to download basic packages for the first time? If no, then what are the steps to connect to WiFi network?
View 1 Replies View Relatedrecently installed ubuntu 9.10 on my HP pavalion DV4 laptop all the things are working fine except wireless connection. I am unable to connect to the wifi network.
View 4 Replies View RelatedI bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.
The output of iwconfig is
wlan0 IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9
[code]...
Is there a tutorial for how to set up a wifi connection for complete newbies to openSUSE? My laptop sees other routers, but won't let me connect to mine. I set WEP, HEX, type in the key, and then nothing happens. On the list it says this is unsecured, even though I have selected WEP.
View 2 Replies View Relatedwifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
View 3 Replies View RelatedI recently got a lenovo w510 laptop and I installed openSUSE 11.3 KDE on it. the wireless works fine at home (802.11g WPA2) when I go to work I have tried to set up the wifi for the 802.1X PEAP network but it doesn't look like it even tries to connect.
The work network set up is as follows. non-brodcasting SSID (do I need to tell network manager of this? I manually enter the SSID no problem)
Dynamic WEP 802.1X
PEAP
blank anonymous identity
no CA cert (I suspect this might be the problem)
PEAP v 1
MSCHAPv2
I have verified my username and pw several times, as well as the SSID. Just yesterday I helped a co-worker get on the network under ubuntu and it worked like a charm.
The Hardware profile displays the wifi card as a "WiFi Link 6000 Series" It is an intel card.
My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies View RelatedHaving played around with ubuntu a fair bit I decided to breathe life into an old thinkpad with a pcmcia wireless card, by following the minimal install instructions and using lxde window manager etc.. Everything works fine apart from the fact that I cannot connect wirelessly. The card picks up and lists connections but whenever I have clicked on a connection the dail spins and then it gives up.I installed network-manager and managed to get nm-applet appearing in the sysTray otherwise I would not even have known there was wireless connections there.
I was thinking there maybe some conflict with another network manager, does this sound likely?
I'm having an issue recently with Ubuntu 10.04 x64. Connecting to my wifi is not working. I believe it is some kind of issue with the router. On Windows 7 the only way that I could connect to the net was by copying the network profile to a usb flashdrive from another computer and loading it mine. The wireless signal just keeps attempting to connect.
View 1 Replies View Related
