Ubuntu Networking :: Atheros AR2413 Not Working After 11.04 Upgrade?
Jun 12, 2011
After upgrading to 11.04 about six weeks ago I've had no sufficient solution to my inability to connect to wireless. Here is a summary of the problem:
After the upgrade, nm is running, and lspci detects my wireless controller (Atheros AR2413 802.11b/g), but nm can only sporadically detect/connect to wireless networks. Essentially what happens is that upon startup, I have to wait (sometimes 5 minutes, sometimes hours) for the computer to "decide" that it wants to detect the networks, at which point I can connect. After this it is fine; it doesn't disconnect after this point, but more often than not it takes so long to start working that I might as well not use the computer.
I've tried "Connect to Hidden Wireless Network", to no avail. I should mention that I also run under the Gnome Classic UI, because Unity is one of the worst UI changes I've ever seen in a version. I've read that Unity causes some problems with NM, but I have no corroborating evidence of this, and the problem persists even without using the Unity UI.
Someone recommended using an older kernel, but the file "menu.lst" doesn't even exist in the /boot/grub folder, so I have no idea how I would do that.
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
I'm in the process of switching back to Fedora after years of hiatus, but I can't get my wireless card working. The card itself is an Atheros AR2413, and the problem is that it seems to appear OK in various places, BUT it doesn't detect any networks. I'm on Fedora 14.
I'm trying to get WiFi up and running on an older desktop PC. lspci gives me the following information about the WiFi card: 00:0d.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) Is there an RPM package for the driver that I need? If no, what should I do to install the driver manually? The PC in question doesn't have any other form of direct internet access. It does have an Ethernet port, but the WiFi router is too far away to hook it up to the access point directly.
I spent days trying to figure out how to get my atheros AR928x 802.11n wireless card to work in Ubuntu. The card worked perfect in Windows 7 but the connection kept dropping in Ubuntu. It would find my router and connect with 60% signal for about 5 seconds, then fall down to about 25% signal and then cut out altogether. After searching for days to find a solution, I finally figured it out and figured Id post it here to let everyone else in the same boat have a working wireless too!
I found this solution from:[URL].. This solution is for JAUNTY (Ubuntu 9.04), so if you are running Jaunty, you can just follow that post. If you are using Karmic (Ubuntu 9.1), you can follow this tutorial I'm posting. It's pretty simple: First, make sure you got all your files up to date. Type in a terminal:
sudo apt-get update Let that run, and once its done, type into terminal: sudo apt-get upgrade Once that finished, restart your computer. Again open up terminal and type: sudo apt-get install linux-backports-modules-karmic
If you are using Jaunty, instead of karmic type in jaunty, if you use another version of ubuntu, you can find a list of versions and their names here:[URL].. Restart your computer one more time, and you should be good to go! This has been tested and confirmed to work on: -Ubuntu 9.1(karmic) with an Atheros 928x 802.11n wireless card, using the Ubuntu installed network software, in a Gateway NV53 laptop connected to a belkin 802.11n wireless router.-HP base station / 802.11g airport express
This has been tested and does not work/has issues with:
-airport extreme I hope this works for you too, and if it does, please let me know with your hardware and Ubuntu version so I can post here what other setups have been confirmed to let this work.
I got a used computer (Toshiba Satellite A215-S5829) for Christmas, and it was running Vista *shudder* so I decided to wipe the hard drive, and install the latest Ubuntu. This is my first real foray into linux, and I've loved the system, but the only problem I've had with is so far is I can't get the wireless to work. I believe the card it has is Atheros AR5001, and I've tried installing the "madwifi" drivers, but I can't get them to register. I've been following the suggestions of dozens of different forum posts and answers I've found scattered around the internet, but I haven't been able to get anything to work correctly.
When I view the "Additional Drivers" in System > Administration, it says "Alternate Atheros "madwifi" driver: This driver is activated but in use," but when I click on the internet icon in the top panel, it only gives me the wired connection. It used to also give me the wireless option, just without ever successfully finding any wireless networks to which it could connect. Like I said, I've done about a half-dozen different things without any success.
I'm trying to get bluetooth working. I have an ASUS USB-BT211 USB 2.0 Mini Bluetooth Dongle. Where do I find the driver and how do I install it? (Currently when I plug the dongle in, it is ignored.)
lshw shows me this:
Code: Bus 008 Device 003: ID 0cf3:3002 Atheros Communications, Inc. Device Descriptor: bLength 18 bDescriptorType 1
I installed Fedora 11 on an Acer Aspire 5516 and everything works except my networking interface card. In Windows XP it is listed as an "Atheros Ar8132 PCI-E Fast Ethernet Controller" and it works. In Fedora 11 it is listed as "Attansic Technology Crop. unknown (OX1062)" and does not work. I have tried the default driver "ath5k" and also downloaded madwifi and modprobed "ath-pci" but I still get the same problem. What is weird is that the wireless does work. Is this chip not supported yet in Linux?
Does Ubuntu 10.04RC support Atheros AR2427 wireless card out of the box? I ran 10.04RC Netbook Live on my new Asus Eee 1001P Netbook today and it looks very impressive indeed. However, I could not get Ubuntu 10.04 to even see the Etheros AR2427 card (iwconfig). Am I doing something wrong or is there no driver to support the card? If no driver what are my options to get it working under 10.04 as I do not want to use Windows on my netbook..
I have tried installing "linux-backports-modules-wireless-2.6.32-22-preempt" but I receive a notification that it failed to install properly upon rebooting... I have also tried installing compat-wireless but it fails to make because it can't find the linux kernel header directory...(I do have the headers, but how do I get the makefile to see a non-default header dir?) sudo modprobe ath9k runs, but running sudo ifconfig wlan0 up returns this error:
Code: sudo ifconfig wlan0 up SIOCSIFFLAGS: Unknown error 132
I just installed the new version of ubuntu 10.10 and I discovered that my wireless card atheros ar5001 is not working, i tried to modprobe ath5k and wont work either.
All the past versions of ubuntu had no problems. bug?
I upgraded to Maverick Meerkat on my Compaq Presario CQ60 and the installation bugged killing all the documents and settings. I'm not a total n00by to Linux as I've been using it for years, but neither am I an advanced user.
Any halp you can give with this as I've tried everything I can think of to get the wireless card to work. Which basically boils down to trawling Google for the drivers and attempting to install them. code...
A fresh Xubuntu 10.10 install will give me access to my network, but with fluctuating speeds, and certain pages load forever. I have tried the blacklist edit as well as ndiswrapper, and neither have helped me. I can't find a madwifi guide for this issue either. Details: Upon fresh install of xubuntu 10.10, wireless is detected. I enter my, key, hit google, and all is good. Then I try to log into my online classes. Firefox hung forever. So I tried a few other sites, and to my disappointment, random sites seemed to fail. Brand-new, fresh, clean Xubuntu 10.10 install, Toshiba Satellite M45-165.
I recently purchased an MSI 740GM-P25 with an Atheros AR8131M gigabit ethernet adapter onboard. I have since discovered that it's not the easiest device to get working in CentOS (or any other distro I've tried, frankly). Anybody use this card and have instructions on how to get it working? I've got a lot of experience with Linux, but I've never been quite as good with hardware stuff as I probably should be. I've included a list of things I've already attempted below (limited as the list may be).
1) Tried both CentOS 5.5 x86_64 and Fedora 13 x86_64
2) Tried to download and compile the source code for three different Atheros drivers from their website (the Linux drivers listed here) in Fedora 13. All stated that I was using a kernel version that was unsupported (>2.4.0) when attempting to compile.
EDIT: Also, I contacted MSI directly for assistance.I got the simple yet incredibly unhelpful "we can't help you unless you use Windows" response. So there is no official support (and therefore no driver) provided by the manufacturer.
I am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
Previously my wifi has worked just fine in 10.04, but as of recently I keep losing my connection after leaving my laptop on for a while (and this happens sooner and sooner each time, used to be daily, now it's every few hours), I can no longer see any networks at all, and I have to reboot to get it working again. I haven't even installed or removed any packages lately, so I'm not such what might've caused this to break all of a sudden.
After a while, my connection suddenly drops and I'm no longer able to see any networks or anything. The only way I can regain my connection is to reboot over time this happens, which is a pain. I've searched around and can't find any fix for this card.
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
I just installed Slackware 13.1 on my new Toshiba satellite c650 and my ethernet device isn't working. I have tried to compile the driver provided by atheros but being a newbie i failed. I understand that there's a driver included in the kernel, so why isn't it loading? The info center list my PCI LAN card as "attansic corp device 2060".
I have a Toshiba MX35 laptop it's a little old but does the job. I'm have a problem getting the wireless to work. I can boot a live CD either Ubuntu 10.10 or Fedora 14 and they will see the wireless card. The card is Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01).
I have Ubuntu 9.10 installed and that is the OS that is having the problem seeing the wireless. The computer will not handle Ubuntu 10.10 (at least it won't handle the desktop effects under Ubuntu 10.10) but handles them just fine under 9.10 and that's why I have 9.10 installed. I really need the Wifi to work because I'm going to travel in a few days.
I've been running Ubuntu 10.10 on this ThinkPad for a couple of months now, with absolutely no problems at all.The wireless was working fine earlier today out at a coffee shop. When I got home and turned the computer on, the network applet just showed a "Wireless is disabled" message.I poked around for a while, mucking with whatever I could (limited, unfortunately, I don't have great linux-fu) and doing the ritual reboot to see if that would get things going.I then spent some time reading through forum threads here, but didn't find any answers.Below are the results of the various commands as described in HOWTO post a Wireless issue (ticket) sticky threadMachine brand and model
So I decided to wipe out Windows and try Slitaz. It's an awesome well featured distro for it's size. One huge problem tho: I can't get wireless to work for the life of me. I actually went as far as to manually load the ath5k module but It just refuses to recognize my wireless router, much less any nearby routers. It simply doesn't see anything when it scans for wireless networks. I have no problem with that in Puppy Lucid. But I'd really like to use Slitaz, just for it's small size and quick bootup. Can anyone PLEASE help me with that?
PS: It happened here before that I had to plea and beg for any response, so PLEASE(!!) don't let me hang like that this time.
I've followed a few different steps to try and solve the wireless issue, but no luck so far. I have a Compaq Presario CQ60 with Atheros 5001 "ath5k" driver and module. I use "WPA & WPA 2 Personal" security.I first did "rfkill list all" to see what was being blocked, and at the time, I had this:Quote:
0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes
i have a dell duo and i am wanting to install ubuntu Q. there is no LAN connection what is the "best" way to get the atheros wireless working.i have looked around for a driver to downlod found several that appear as they would work i just don't know which would be the best or the best way to download and install it?
I installed Debian awhile ago, but then replaced the mobo. Now my system doesn't detect the onboard LAN card, installing the windows driver fixed that problem on windows but I can't seem to find the appropriate driver for Linux.
The card is an Atheros 8151.
The problem is that my install of linux (64bit) does not recognize any adapter on the system. I went and downloaded a driver, after a make, make install, and reboot it still wasn't fixed.
I can find on this recommends downloading from some partner.atheros.com which seems defunct.
A wifi card with the ath5k driver used to work properly until a couple of weeks ago. Now, if I ping the router the response times sometimes are okay but often fluctuate into the range of many hundreds or thousands of milliseconds. Occasionally the connection breaks down entirely.My laptop, which uses a different card, works fine (typical ping response times of 2 ms), so its probably not the router which is faulty.I use opensuse 11.3 x86_64, currently with the 2.6.34.7-0.7 desktop kernel and knetworkmanager
I've just upgraded from 9.10 to 10.04 and I cannot connect to my university's VPN now. The error says "Connection attempt timed out". Hopefully the following log might be useful in solving this.
I've searched but cannot find anything useful. I've re-entered the details to make sure they're correct, reinstalled the pptp package.
Code: chris@chris-desktop:~$ tail -f /var/log/syslog Aug 13 12:52:21 chris-desktop pppd[3321]: Child process /usr/sbin/pptp student-vpn.bris.ac.uk --nolaunchpppd --logstring nm-pptp-service-3279 (pid 3322) terminated with signal 15 Aug 13 12:52:21 chris-desktop NetworkManager: <info> Policy set 'Auto eth0'
After several hours of frustration to point of almost scrapping linux alltogether I was finally able to get my wireless networking to work in Linux Mint 6. I searched for hours and came up with several different suggestions that were supposed to fix my problem - NONE OF THEM WORKED! As a new linux user, I can completely understand why so many people try linux and then give up on it. It should not be so hard to get a wireless internet connection working.
Said another way - the people making distros should read these forums and see what difficulties are experienced and work on fixing them. In any event - I want to post my solution to the problem for my COMPAQ CQ60-211DX so that anyone else who wants to try linux on this model laptop will save a great amount of time. Here are the steps I took to get linux mint 6 to work on my laptop:
1. Open terminal window 2. Type - lspci | grep Atheros 3. Hit the enter key
If you see: Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
then these instructions WILL get your AR242x (AR5007) wireless card to work for you. Be warned - I tried everything I read including ndiswrapper, etc. - none of it worked! You will need to click the menu button go to all applications and then administration. From there, select hardware drivers and look for anything that has Atheros in it. CLICK DEACTIVATE! Now you will have to restart your computer. When it starts back up....
