Ubuntu Networking :: Agere 802.11b PackardBell - Freezes On Connecting?
Feb 21, 2011
I'm new on Linux and I have a problem with my wireless connection. Ubuntu is always freezing when I try to connect my wificard to my box.
Here are, different tests?
Code:
franck@franck-EASYNOTE-PB11400002:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.10
DISTRIB_CODENAME=maverick
DISTRIB_DESCRIPTION="Ubuntu 10.10"
Code:
franck@franck-EASYNOTE-PB11400002:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub .....
View 9 Replies
ADVERTISEMENT
Oct 16, 2010
I am connecting from my WinXP laptop to my Ubuntu Server desktop using PUTTY. The laptop is using Wifi and the desktop is on a wire. I have a D-Link DI-524 wireless router. My session works fine for a while, and then freezes, sometimes after only a few seconds, and sometimes after many minutes. The same thing happens when I use VMWare Server Console to connect from the laptop to the desktop's virtual machines. Other connections between these machines under this setup (RDP, samba, SVN) do not experience problems. I usually do not experience problems establishing the SSH and VMWare connections.I have ended up using Windows Remote Desktop to connect to a Windows XP virtual machine on the desktop, and opening a PUTTY session on that machine. That's a nice workaround, but it makes it so that I have to have that VM running in order to have a reliable SSH session to the box
View 5 Replies
View Related
Jun 17, 2010
Every time I connect my notebook to a network (wired or wireless) it freezes. I have no clue what might be causing this.
View 4 Replies
View Related
Jan 20, 2011
I have a keypad with a numeric part to it (as well as the traditional numbers above the alpha keys)It stopped working after I installed Moonlight - and although I have uninstalled Moonlight it is still not working (I may be wrong that Moonlight was the problem, but I can't think of anything else)The number lock indicator still lights up, but there is no response to any numeric input. With the number lock key off, the alternative actions (cursor up, down, etc) work normally.
View 7 Replies
View Related
Feb 9, 2010
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies
View Related
Apr 27, 2009
We're planning on getting computers with built-in Agere et131x NICs, and were wondering if these would be automatically detected/installed upon installing CentOS 5.3 ?
View 4 Replies
View Related
May 1, 2009
I just have CentOS installed and cannot get the Agere et131x network card to work.I have tried the following:Reboot the computer and still did not see the network hardware.
Fai
lspci
Quote:
[code]....
View 7 Replies
View Related
Feb 8, 2011
Agere got purchased by LSI and now LSI tech support claims there is no Linux driver for this card even though the literature clearly states the availability of a Linux driver.I have installed the firewire driver mentioned in other forum posts from ELRepo.
View 4 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Feb 24, 2011
Forgive me if this has been answered, but searches have been un-fruitful. I recently built a 64 bit Ubuntu 10.10 pc. It is sitting right next to my Windows 7 Premium 64 bit machine. They can't see each other. I disabled Homegroup on my network. Now, when I try to access Ubuntu from Windows, I am prompted for a username and password. Both systems have the SAME UW and PW. It doesn't connect.When I go from Ubuntu to connect to Windows, I am prompted or Workgroup passwords.
View 6 Replies
View Related
Apr 28, 2011
I was wondering if it is possible to SSH into my home PC and enable the VPN I have already set up there? After loads of Googling I have been unable to find the command!
View 2 Replies
View Related
Jan 19, 2010
I'm running Ubuntu 9.10 Live CD and I can't connect to the internet. I click on System --> Preferences --> Network connections and under the tab DSL I click Add. After i fill the information I click to connect to the new connection and after a while it shows me a baloon which says "Wired network: Disconnected - you are now offline".
View 1 Replies
View Related
Feb 5, 2010
I have often connected to my machine's remotely through ssh. Today I noticed that when I connect, the "last login" IP seems a little weird to me. I'm on my home network, so I connect directly with the IP of the computer within the router. But after the IP I get this XXX.XX.X.XXX.dedicated.neoviatelecom.com.br What is the neoviatelecom part? Is that normal? I don't remember ever seeing that there before. If I connect a couple of times from my win7 laptop (through cygwin) I get the correct IP address, but followed with the other part. If I connect with my other desktop (running Karmi 9.10) I get the same neoviatelecom thing as above.
View 9 Replies
View Related
Mar 4, 2010
Installed Ubuntu 9.1 - Linksys WUSB600 connects but no network access. I get "server not found", so no data being xmtted. It worked fine in ver 9.04 but not in 9.1
View 1 Replies
View Related
Mar 28, 2010
I recently installed the latest version of Kubuntu in a dual boot system with Windows XP on a Dell laptop. The dell laptop has a broadcom wireless device, and I was able to set up the driver and get wireless working. Then I booted into windows XP to make a whole bunch of updates/driver installations, and when I booted back into Kubuntu it would not connect to the wireless network. I am pretty sure the device is still active, because it picks up on the wireless networks in the area. But KWallet does not open to ask for my password on booting. Something is not set right, but I can't tell what.
View 1 Replies
View Related
May 16, 2010
Situation: I can access Ubuntu from Windows XP but not XP from Ubuntu. When I try to access XP from Ubuntu I get message "Unable to mount location Failed to retrieve share list from server"
In System/Administration/Network Tools using Network device: Loopback Interface (lo) I can ping the IP address of the XP machine. Also, using Network device: Ethernet Interface (eth0) I can ping the XP by using its computer name.
In System/Preferences/Network Connections it shows under the Wired tab: Auto eth0 never used
Below are the settings in my smb.conf file.
## Browsing/Identification ###
workgroup = MSHOME
wins support = no
wins server = w.x.y.z
dns proxy = no
[Code]....
View 1 Replies
View Related
Jun 25, 2010
A group I'm working with recently got new netbooks with Ubuntu Netbook Edition 10.04 and some AT&T LaptopConnect (3G) cards. When I hook them into the usb port, the cards light begins blinking, but nothing shows up to indicate ubuntu has recognized the new card, nor am I able to connect to the internet. My searches for help have indicated no one else has had any difficulty with this and that the card usually pops up and installs some drivers automatically or something.
I'm not sure at the moment the model of the 3G card other than very new, but I can check on that in a bit. The netbooks are HP Mini 210s.
View 4 Replies
View Related
Oct 13, 2010
am using win7 trying to connect to a ubuntu box using vnc. I managed to get it working for me with the full gui viewable. Then one of my housemates played around with some display settings for the backround and all of a sudden vnd only comes up with a terminal.
I went into terminal and attempted to start gdm and got this output
root@ben-desktop:/home/ben# gdm start
** (gdm-binary:21376): WARNING **: Failed to acquire org.gnome.DisplayManager
** (gdm-binary:21376): WARNING **: Could not acquire name; bailing out
root@ben-desktop:/home/ben#
[Code]...
View 2 Replies
View Related
Oct 16, 2010
I've entered the essid, wpa2 key and the bssid but kubuntu still won't connect to the router....m I missing something here?
View 5 Replies
View Related
Jan 21, 2011
want to connecting between ubuntu 10.10 and windows XP.There are a lot of file , music , movie..etc in my laptop. this is XP other laptop has ubuntu system.want to file transfering with cable each other.
View 2 Replies
View Related
Feb 13, 2011
I have 2 computers in my house, on my network. I want to connect to one computer to the other using SSH. On one I installed "OpenSSH-server". "OpenSSH-client" was already installed. I go to the other computer to try to connect to the "server" computer and I enter in the terminal:
Code:
ssh username@192.168.0.33
It never connects. The text input "bar" keeps blinking, it never connects and I get the "Connection timed out" message.
how I can connect to the "server" computer? What am I doing wrong? And if I edit my "/etc/ssh/sshd_config" file to listen to port "12345" how do I get the other machine to connect to that port?
View 8 Replies
View Related
Jun 8, 2011
I'm having a little trouble getting unison to work on Kubuntu and can't figure out why.I have two machines. One is a dinky little box that I'm using for version control and as a file server. It has an IP address of 192.168.1.5. My other machine is a laptop with an ip address assigned via DHCP. I can ssh from the laptop to the dinky box with no problems. However, in unison, I've set up a profile to sync /home/will with ssh://will@192.168.1.5/WillHomeSync. However, when I try to connect, it just hangs on the "Contacting Server..." window and does nothing. How do I even go about starting to troubleshoot this?
View 1 Replies
View Related
Dec 29, 2010
I have a Squid Proxy Server running on centos in my office. The proxy server is running OK and I have to apply the proxy settings in web browsers to access internet. I have also created different users to access internet. I have also created a VPN server in proxy server. It is also running very fine. People from outside and inside the office can connect to the VPN server. I have also opened all ports on proxy server.
Problem is, if any of my employee try to connect any other VPN server outside my office, it does not get connected. It shows some "ERROR 619". Whenever I try to connect it always show this error after verifying username and password.
I am not getting that where the problem is. Is there firewall problem in proxy server? OR anything else?
View 1 Replies
View Related
Jan 22, 2010
I have a problem which is connecting automatically to my spwireless. On my windows, my schools provide me the disc which contains several .cer files and a automated batch files to copy the .cer files to the root folders. I can choose to use the other network but in using that, i have to manually connect compared to using the spwireless. Anyway, my problem is that, how do i add the .cer files and to where so when i connect to the network it will look there for the cert. Because when i manually connect, only one cer can be chosen.
View 2 Replies
View Related
Feb 15, 2010
Sometimes I am unable to connect to my WEP network in ubuntu. No matter how many times I try, even restarting, it will not allow me to connect. However if I boot into XP, I can connect to the network. Then when I reboot again and then try in Ubuntu again, it will work.
Router is a Netgear MR814v2
View 2 Replies
View Related
Feb 20, 2010
I have loaded ubuntu 9.10, and am not getting internet from my router using a linksys EG1032. I have found articles stating that i should use the sk (URL...) or nge URL...)drivers. According to the instructions i found, they require that i make changes to my kernel config. I do not know how to do that, or if doing so is wise.If someone would help me figure out how to connect this NIC card.
View 7 Replies
View Related
Feb 21, 2010
I have a problem connecting to the internet using Ubuntu 9.10 . But the same works fine in Ubuntu 9.04.. First I thought it was my hardware problem and asked my friend(also was using ubuntu 9.04) to try ubuntu 9.10 but he too failed to connect....
I have an wired ADSL Modem given by my Service Provider. When I switch on my modem the router gets connected but it cannot connect me to internet...
View 9 Replies
View Related
Feb 26, 2010
I have a white label netbook with the Realtek RT8187SE Wireless card on PCIe. It is not detecting wireless networks consistently. When I am even 1 meter from the wireless router, I get no networks in range, but sometimes I pick up networks that are more than 20 meters from me. I can not connect, even if it is unsecure.
WiFi Radar does not detect the card. If I run a system check on the PCI bus I get the following: 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22) Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller Flags: bus master, fast devsel, latency 0, IRQ 17
[Code]...
View 3 Replies
View Related
Mar 2, 2010
I recently went back to Linux on my netbook because Windows 7 was too laggy (1gb of RAM, go figure). I've never been able to connect to the protected wireless network on my campus without using Windows, though, so I was hoping someone could help me finally get that figured out.
The school has a how-to for connecting to the network using various operating systems, including Linux, here (scroll down to the bottom to choose OS). After following the guide through the CA certificate it mentions, the network manager tries to connect for a while then just sort of times out and asks me to enter the information again. Using Wicd, I noticed that this timeout appears to happen when trying to obtain an IP (after authentication).
My system: Acer Aspire One AOA150 with an Intel 4965AGN wireless card (installed by me a few months back, have had no problems with the card itself not working). I've installed Kubuntu 9.10 Netbook edition and done all available updates. My campus offers an unprotected "Visitor" network that I can connect to without issue, but they limit what you can access using the unprotected network so I need to be able to connect to the WPA2 one.
I've tried getting help from on-campus IT but keep getting told that none of them know how to use Linux, which makes me wonder who exactly wrote the how-to on their website... The guides on the website are for older versions of Ubuntu, but I figured they would remain applicable on a later-version Kubuntu install.
View 2 Replies
View Related
Mar 5, 2010
I installed Ubuntu (the latest version) on a desktop computer for my kids mainly because the desktop has a single core procecessor. I have Win7PRo on my laptops and desktop and I was wondering how exactly do I connect the Ubuntu to the Win7 Homegroup so I can get to movies and music files etc. I put in my network password set for the network thru the belkin wired/wireless router and it didn't work. I put in my homegroup password and it didn't work. I have internet access thru the Ubuntu I just can't become part of the network with Ubuntu.
View 1 Replies
View Related
