Ubuntu :: Network Printer Doesn't Work After Upgrading To 10.04
Nov 8, 2010
I have recently upgraded to 10.04 and subsequently to 10.10. I have a network printer Lexmark C530dn. Before the upgrade to 10.04 it work OK. After the upgrade i have this problem: When i print something it goes right to completed jobs, without an error and without printing. My user is allowed to print, I checked that.
this is from the access log:
localhost - - [08/Nov/2010:20:38:58 +0100] "POST / HTTP/1.1" 200 253 Create-Printer-Subscription successful-ok
localhost - - [08/Nov/2010:20:39:10 +0100] "POST /printers/Lexmark-C530 HTTP/1.1" 200 205765 Print-Job successful-ok
When i print the self-test page, it prints fine, so I assume the problem's in the system rather than the printer.
View 3 Replies
ADVERTISEMENT
Jun 18, 2011
I have trouble with launch game on Debian 6(repo testing). code...
How to fix this trouble?
P.S. English — is not my native language.
View 5 Replies
View Related
Feb 21, 2010
I have tried all the usual stuff like: apt-get cups-pdf and similar things.
Of course I use the proper way (like sudo, etc.) The point is I can't print PDF files. Have a look at the image:
<snip>
I have also modified to the cups-pdf.conf file and have directed it to /home/{USER}/PDF And yes the aforementioned folder (i.e. PDF) exists at its proper place.
So I think the main problem is "P2POutputStream" error which you can see in the image.
View 2 Replies
View Related
Oct 22, 2010
Yes, that's correct, it's a Celeron 400 running Xubuntu. And the card was working on 9.10, but not working anymore in 10.04 neither in 10.10.I've no other idea and I'm really considering moving back to 9.10Is there anything else I can check.
View 6 Replies
View Related
Aug 31, 2010
I am networked to a Windows machine. I can see and open files across the network. I can see and add my HP 6000 printer (it is on the Windows machine). On my Ubuntu machine this printer has a check mark by "Enabled" and "shared" but I cannot set it as default (that option is ghosted) and when I try to print a test page it says "unable to connect to CIFS host" I downloaded the HP Linux setup program. That program cannot locate the networked printer at all.
View 7 Replies
View Related
Mar 6, 2010
After last Current upgrade my printer stopped working.
View 14 Replies
View Related
Dec 12, 2009
I was always able to print with my HP OfficeJet 700 printer in Linux, but all of a sudden when I need to print something important, it doesn't work?! It says the print job stopped. It only printed 1/4 of 1/4 of what I needed to print. It has the correct print settings, etc... but I can't print?! Please help. It was able to print the test page before, but now even that won't print. Even CUPS is having problems connecting to the server. Printing in Windows has the same problem.
View 14 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Feb 3, 2010
i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.
View 4 Replies
View Related
Oct 8, 2015
I am trying to get the QL1060N to print and cut under Jessie.
I used the Ql1060N on wheezy (cups 1.5.3) with the standard Brother driver and the ptouch/foomatic driver of the QL550. They both worked out of the box.
Configuration for Brother QL1060N Driver:
Description:ql1060n
Location:
Driver:Brother QL-1060N CUPS v1.1 (grayscale, 2-sided printing)
Connection:socket://XXX:9100
[Code] ....
On Jessie (cups 1.7.5):
I first tried the standard Brother driver from here: [URL] ....It didn't work at all. When I print, Cups tells me that the job has been completed, even though nothing has been done. Sometimes I also got the error "job canceled, filter failed", but I can't reproduce this error...
The foomatic/ptouch driver for the QL550 prints like it did before, but doesn't cut the lables automatically like it used to in wheezy. (I'm using the same printing file/picture as in wheezy and also the same configuration.)
View 1 Replies
View Related
Apr 22, 2010
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
View 2 Replies
View Related
Jun 17, 2011
My network printer does not work anymore. What can I do now I have an Lexmark Z617 printer.
View 5 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
Mar 24, 2010
I have a parallel port printer connected using usb->parallel adapter. Sometimes the printer prints sometimes it doesn't.
A job will go the print queue and then sit there for ages. Sometimes if I unplug and then replug the usb->parallel cable the printer will print other times it will print half the document then freeze until the cable was unplugged and replugged again.
The printer never shows up in the list using lsusb (only my usb mouse and scanner do).
The printer is an hp deskjet 690c and worked fine under WinXP through a normal parallel cable. The one thing I haven't tested (but will test tomorrow) is the usb->parallel cable in XP.
View 1 Replies
View Related
Jun 15, 2011
i've installed it on my parents old computer, mostly for downloading. But wired internet did work all the time but then i had to reset our router because of some problems and now it doesn't work anymore! But the strange thing is, if i put the cable on my own laptop with windows on it, then it works as normal.
So i guess its some kind of DNS problem, but i'm very new with ubuntu and also not so good with computers. Our network is simple just an modem connected to an router: Sitecome WL-341.
View 4 Replies
View Related
Jan 17, 2010
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
View 9 Replies
View Related
May 4, 2010
I installed Ubuntu10.04, It cannot driver Wired network and wireless. Later I installed linuxMint9, wireless is ok, but wired network doesn't work. I am sure the lan cable is ok. It works in Windows.
View 3 Replies
View Related
Feb 14, 2011
what is the command to restart the network services? ive forgotten i think it uses -hup switch though. about 1 in 20 boots on my desktop ubuntu system results in the system insisting its no longer on a network yet has a fully functioning network card. a reboot always fixes the issue but that doesnt seem like a long term solution to me. If I ping a neighbouring system I get nothing. (sent packet count increases in ifconfig) If I ping from a neighbouring system back to my desktop I get nothing (no change in packet count) I can bring down and back up the network interface with no results. A sniffer shows the system definitely isnt sending anything out Everything worked previous boot and will work again after a reboot.
View 2 Replies
View Related
Feb 22, 2010
I just got a new T400 and installed Ubuntu. Everything is fine and I'm really impressed by this OS. But seems my wireless network is very unstable. Sometimes it just can't connect.
The wireless interface is:
description: Wireless interface
product: PRO/Wireless 5100 AGN [Shiloh] Network Connection
vendor: Intel Corporation
View 2 Replies
View Related
Feb 27, 2010
I have been trying to install Xubuntu 9.10 in an old desktop computer (Mobile AMD Duron, 213 Mb RAM) but the mouse doesn't work! Neither the Network connexion... When I boot with an USB (same OS) everything works fine... I can also boot with Puppy Linux (working in other partition) without any problem.
View 4 Replies
View Related
Sep 20, 2010
I installed Ubuntu on a machine after erasing everything else and the wireless has never worked. It says that the wireless has already shut down even though it recognizes the wireless network and my other non-linux machines see the network and work fine.
View 1 Replies
View Related
Dec 6, 2010
My desktop PC has 2 NICs. I have Ubuntu on it since several years, and I remember that both eth0 and eth1 used to work. However, I discovered recently that currently only eth0 works, and eth1 is dead, but I don't know why. It's been a while since I've tried eth1, so I have no idea when exactly it broke. I suspect the problem may be related to the fact that the MAC address is incorrect: it is set to 00:00:00:00:00:00, which seems wrong. But I have no idea how this happened...Any idea what might be wrong and how I can fix it? Here is some output which I think is useful:
Code:
peter@cheetah:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:18:f3:68:42:78
[code]....
View 9 Replies
View Related
Jul 3, 2010
I have two simultaneous active mobile connections through my two mobile phones and USB data cables. Yet I can only send/receive with one connection.Each of the phone modems have a node in /dev, namely ttyACM0 and ttyACM0. So the modems are detected correctly.After setting up two dial-up connections with the two modems I have two ip's. Ifconfig-a confirms this:
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.10.219.60 P-t-P:10.6.6.6 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
[code]....
View 1 Replies
View Related
May 3, 2010
I have Ubuntu Lucid Lynx and suddenly my wired internet network doesnt work anymore after a forced restart.
View 9 Replies
View Related
Jun 26, 2010
I'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:
Code:
$ sudo iwconfig wlan0 essid "apoint" key s:my_key_8
this error is returned:
Code:
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.
View 2 Replies
View Related
Apr 2, 2010
The main thing preventing me from going Linux although I have it installed in a multi-boot is the probelm I have with Reconnecting the Network (eth0)
If I reboot everything is fine and I am automatically connected to internet via my Ethernet_NAT_router/Homeplug_PowerLine/Cable_Router (using DHCP)
But if I manually disconnect the Network using the tray icon, or through the terminal, when I reconnect the Network Manager says I am reconnected but actually I am not connected to the internet. I can load my Cable Routers configuration page but pages beyond that in the outside world are accessible no longer...
To regain access I have to reboot.
The reason this is important for me is that I reckon if I could get this sorted then if I put the laptop to sleep it will will wake up and reconnect.
As it is using Linux sleep function is unworkable unless I don't mind losing internet.
I am determined to get this sorted eventually as I feel sure there must be a solution. My laptop isn't new but is a good workhorse.
Dell Inspiron 4100 / OpenSUSE Linux 11.2 Gnome
View 9 Replies
View Related
Oct 16, 2009
I'm trying to get my vsftp server to run. When ssl is disabled it works pretty fine, but after turning on I get the following error:
[Code]...
View 9 Replies
View Related
Aug 24, 2011
just downloaded Chromium, but the x button for closing a tab doesn't work. How can i fix it?
View 7 Replies
View Related
Mar 27, 2011
I have 2 different networks: the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping [URL]... on the gateway machine, it works, while it doesn't work on the private network.
View 7 Replies
View Related
