Ubuntu :: Network Shares Not Shown When Uploading
Oct 22, 2010
I successfully connected to my office's (Windows) servers, so usually I can browse for files via Places. But when I want to upload a file for example as an attachment in gmail, after clicking the browse button, only the local drives and folders are visible in the file upload window. Is there some way to tell my browsers (Chromium and FF) there are more drives in life? (I'm using Maverick Meerkat). (And I'm not sure the problem is my browser or my settings or anything else..)
View 1 Replies
ADVERTISEMENT
Sep 26, 2010
I just reinstalled Ubuntu Lucid Lynx and an old problem has come back. For some reason I couldn't fix it even in my previous installation. The problem is the top gnome panel. See the photo below: As you can see, the network icon is not shown properly while the Me menu is being shown twice. I can't even restart or log out or shut down at this situation without pressing the keystroke to turn the power off.
View 9 Replies
View Related
Apr 23, 2010
I am giving 10.04RC a try instead of Windows 7, so far so good. I can connect to my network shares fine using "Connect to a Server" & bookmark with the file browser, however when I use OpenOffice writer Spreadsheet to open/save files the shares disappear in the"Open/Places". Is this a bug in Ubuntu or Open Office? Is there an update/fix?
View 1 Replies
View Related
Feb 28, 2010
I've got problems uploading files to a remote FTP server using passive mode with enabled SuSeFirewall2 (Using 11.2)
I've disabled Firewall and everything went ok. Why firewall disables or terminates OUTGOING connections to a remote FTP?
View 7 Replies
View Related
Jul 29, 2011
this is a brand new installation of 10.04 on a desktop. it's a dual boot with XP and the connection works on that side.i'm thrown off balance by the complexity of the situation... at least it is to me . i am able to see my wireless connection (along with my neighbor's). i enter the WPA password when prompted and for the next 5 minutes, it tries to connect with no success at the end.
Code:
francis@gandhi:~$ sudo lshw -c network
*-network:0
[code]...
View 2 Replies
View Related
Aug 15, 2010
Today when I logged into my fileserver it told me there were 20 updates available. I went ahead and installed them, one was a new kernel. After reboot, I cannot see that machine when I browse the network. It still has the same static IP and I can still map to the shared drives, so Samba is working. When I browse the network from Windows or my WDTV Live media play it no longer shows the server by name. The smb.conf file is still intact and I restarted Samba. Not really sure where to start troubleshooting why I can't browse to it.
View 8 Replies
View Related
Feb 5, 2010
Okay currently I am using a a Belkin F6D4050v1 usb wireless n card on a 32 bit intall of ubuntu 9.10. I have already installed ndiswrapper and installed the the rt2870.inf driver and rebooted. But i still have no wireless. when I use the command "sudo lshw -C network" all i see is my pci wired nic card"lsusb" the ID of the card is "050d:935a Belkin Components""sudo iwconfig" sayslo no wireless extensionsetho no wireless extensions
View 2 Replies
View Related
Jun 25, 2010
I recently upgraded from Ubuntu 9.10 to 10.04 (both 64-bit) and my USB WiFi adapter which previously worked fine stopped working. The adapter is a Hama USB stick based on the Ralink rt73 chipset. I've tried using the Ralink drivers that come with 10.04 (both rt2800usb and rt73usb) but neither work. When I use rt2800usb, the adapter is recognized as interface wlan0, however I can't see any wireless networks. When I use rt73usb (and blacklist rt2800usb to avoid conflicts) I no longer have a wlan0 interface and there is no wireless adapter shown in the network manager. I've pasted in the results of lsmod, lsusb, and ifconfig -a (with MAC addresses removed) below.
[Code]....
View 3 Replies
View Related
Nov 11, 2010
I have installed fedora 13 on my dell inspiron 14 r laptop recently.but no network icon is shown on top right corner.well i tried from system menu list and manually configured it.i have wired connection and tried my best but unable to browse the net.
View 1 Replies
View Related
Aug 2, 2011
i've been looking into OpenSuse for a while now, and finally got around to installing it, so far so good however i can't get my Laptops' wifi card to work, i can use my Eth0 chord but thats all. My laptop model is:Toshiba Satellite L755 with a intel pentium processorMy Network card is:02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)Please get back to me on what i need to do to fix this, so i have a flawless installation
View 1 Replies
View Related
May 24, 2010
I'm using WINE and have to open a share on my network. I go to "My Network Places" and it says it's invalid, I try manually typing in the URI and it says it's invalid. I try to assign a drive letter to the URI and it says it's not a valid drive.
View 9 Replies
View Related
Feb 1, 2010
I'm running Ubuntu 9.10. I am hooked into my home network with several windows machines attached. On a daily basis I browse the network and use network shares. Today, I can't. Today I can't see any other machines from ubuntu. I haven't changed any settings in Ubuntu, and nothing has been changed on the network, but yesterday it worked fine and today it doesn't.
View 2 Replies
View Related
May 4, 2010
Enviroment:
-server ubuntu 9.04 with samba
-client fresh ubuntu 10.04
ubuntu is not auto-mounting samba shares. Old 9.04 done it without a problem. I need to type sudo mount -a to have samba mounted.
fstab:
//192.168.1.101/www /mokonawww cifs auto,iocharset=utf8 0 0
ls -l
drwxrwxrwx 25 root root 0 2010-05-03 17:44 mokonawww
Tested with diffrent parameters. And another problem also with samba shares, when I edit file from editor (eclipse) after save i got 'file changed dialog'. seems like file is written with some delay ? and timestamp dont agree (its my blind quess). On 9.04 no problems. Tested with 2 instances of Eclipse. One copied from 9.04 and second fresh install. Other editors raport the same problem. Its anoying as hell.
View 3 Replies
View Related
Sep 21, 2010
I am using Xubuntu 10.04 and can't find where I can create shares as well as access network shares. In Ubuntu I just go under Places/Network and there are my shares. How do you do this in Xubuntu?
View 6 Replies
View Related
May 1, 2010
This morning I was configuring a DNS server through Yast at home, I've done it once before (in another wireless lan)and it works perfectly. But this morning, after I clicked "start dns server now", everything freezed, and caps lock light on keyboard kept flashing. I rebooted laptop,it couldn't boot into run level-5 and there were few "skipped" items and "failed" items displayed.... Sorry I'm new to linux so I re-installed it this afternoon, and kept /home partition, formatted / partition.
Everything seems to be fine after re-installation, again I tried configuring a DNS server and clicked "start dns server now", but the same problem appeared, caps lock light kept flashing and I rebooted the laptop but fortunately this time it didn't fail on any items when booting
In Yast-Network Settings, I choose "use controlled with network manager", and I can connect to wireless router and browsing web, but there are no any interfaces shown in Yast-Firewall, and this time, after I clicked "start dns server now", nothing happens, dns server just won't start...
View 7 Replies
View Related
Jul 7, 2011
I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 4 Replies
View Related
Jan 24, 2010
I'm trying to share some folders over the network, but the shared folders are not visible on another computer. This is through double clicking my computer from the Network list in Nautilus. However, I can access the share by typing the full address(<computer name>/<share name>) in "File > Connect to Server...".Since I can't type the address manually from my blu-ray drive, I need to get the shares to show on the network. What is wrong with my settings?
View 2 Replies
View Related
Feb 13, 2010
I am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies
View Related
Nov 22, 2010
I am trying to access my win7 networks shares with pcmanfm. (I have done sudo apt-get install gvfs-backends). I dont have any pw on my win7 and i dont want one. So every time i try to connect, pcman ask me for pw. How to configure pcman to dont ask me for pw? I have tried linux mint live usb and ubuntu live usb with same result.
View 5 Replies
View Related
Dec 21, 2010
I have three computers on the network, one is using Windows Vista, one is in an office room using Ubuntu 10.10, and one is in the living room using Ubuntu 10.10. All three computers have folders shared, and were all three reading files just fine with one another for a couple of months. To share the folders, I just right clicked on them, selected sharing options, and checked the boxes for "share this folder" and "guest access". Both Ubuntu computers have samba installed and configured so the Vista computer can see their shares. Tonight, the Ubuntu computer in the living room stopped being able to see the other computers under places -> network. The other Ubuntu computer and Vista computer can still see each other's shares just fine.
I also created a test share folder with a file in it on the living room Ubuntu computer, and it can be seen by the other Ubuntu computer. I can ping the computer in the living room, and the computer in the living room can ping the other two computers. I set a static IP address on the Ubuntu computer in the living room to rule out an IP address conflict. Under network, if I go to "go -> location..." I'm not quite sure what to type in there to find other computers. Under places -> network, the only thing that comes up on the Ubuntu computer in the living room is it's own shares. I tried using the search feature, but was unable to come up with anything resembling my particular problem within a reasonable amount of time.
View 1 Replies
View Related
Mar 11, 2011
I'm in a situation where we might see a few Ubuntu machines added to the fleet of systems here at work (school district). A problem that I'm facing is I would like to do a very, very simple task in Ubuntu, which is to create a shortcut share to a network resource. On Windows, you can right click - new - shortcut - \servershare, done. Then when you click on it, you have the appropriate permissions within the folder based on what permission settings exist on the actual server where the folder resides.
In Ubuntu, the closest I can get is to create these shortcut links on the left side of Nautilus in the bookmark pane. Here's the part that rages me to no end. If I log out and back in, they're ALL renamed to "smb". LOL. What. Really? I'd like to create shortcuts for several network resources. I'd like these links to either be within the Nautilus bookmark area, or within the desktop itself. Ubuntu is on the domain,
View 5 Replies
View Related
May 27, 2011
Was enjoying my new experiences until I tried to access/see my OpenSuse 11.4 install (Within VirtualBox on Windows 7)I can surf the net and download packages etc but from Windows 7 the Virtual OpenSuse7 does not show up.I know the windows network works because I also have Ubuntu10.4 on VirtualBox and that I can see and access fine.Change to OpenSuse and it all goes down the tubes, doesnt even show up in the Network on Winsows 7With Ubuntu I have etho setup to use DHCP automatically.I've tried numberous settings unsuccessfully on Suse and I think in the process have probably changed something incorrectly, but it didnt show up in Network places even before I started fiddling.Settings within Network Settings are:
1) Global options
Network Setup method: Tradional with ifup
IPv6 Protocol - Enabled
[code]....
View 6 Replies
View Related
Feb 15, 2010
I run some IT systems for my schools Engineering student organization.
We are upgrading our systems and I just purchased a new server system which I am configuring.
I am using Ubuntu 10.04 Lucid Lynx and the new likewise-open packages.
The points I bring up following this sentence are to fulfill this final goal : Get SFTP, SSH, and Network Share's over our private network all using the schools Active Directory for auth and it's groups to derive privs.
So... Here's what i've done and what i've tried to do.
1 ) I set up likewise-open and got it to join the domain. When I do this I can ssh to localhost as 'schoolnetworkADname'. So that part works (hurray). To get a network share to use these same auth methods I have tried installing likewise-open-server. Everything launches find and the daemons run, but when I go into computer management on a windows server to set up the actual shares, I get permission denied. The account it is giving permission denied to is the same AD account that join likewise-open to the network, so... what is going on.
2 ) Samba, fail. I can't seem to get samba to run on this machine at all, which is strange because even my Samba expert was puzzled. It just won't let Samba join the domain properly, and due to this, I want to keep on the newer likewise package... unless I have to switch to this.
How I can get the lame likewise-open-server to work?
View 1 Replies
View Related
Mar 3, 2010
I need to set up ssh/sftp/network shares all authenticating with AD. I want to use likewise to do the auth, but to mount the network shares I need to use an older version of samba so it can connect with likewise.How can I go about installing an older version of samba onto this new distro of the OS? I've tried installing the lenny and etch versions but I always get an error during install just saying that samba errored.
View 4 Replies
View Related
Aug 10, 2010
While in a web browser I'm trying to attach a file which resides on a network location. The file dialogue doesn't allow me to browse any network location. I've mounted the volume and added locations to favorites. I've also tried entering an smb:// path. This only happens in browsers, both FFnd Chrome, some examples would be attaching a file in gmail, yousendit, etc. I can browse and work off the network normally in desktop apps.
I'm very new to *nix.
-MacBook Pro
-2.4Ghz, 4GB RAM
-Nvidia 8600M
-Ubuntu 10.04
View 1 Replies
View Related
Sep 14, 2010
I often see DBus errors when I unmount network shares (samba). In every instance, they unmount fine. In every instance, I notice no weirdness. Yet these errors randomly come up. There's no pattern to it whatsoever.
View 1 Replies
View Related
Oct 23, 2010
When I goto Places->Network sometimes I see the other Windows computers in our house, and sometimes I don't. How do I make this more consistent?
When I double click on the "Windows Network" icon right now, I get "Failed to retrieve share list from server". Sometimes this works and I get to see the shares on the Windows pcs.
View 1 Replies
View Related
Jun 14, 2010
Using Xubuntu 10.04 to connect to some Windows XP shares by adding lines to fstab. The network shares are not mounted at boot, but can be mounted from the command line, after the OS has booted and everything is up. I am suspecting the network isn't up yet, when fstab is processed. I tried adding the option "_netdev" to the relevant network share lines in fstab, but the shares still don't mount automatically at boot up. I read that this option only works for NFS and I am using CIFS. Can someone confirm that _netdev only works for NFS ?
I've seen solutions involving running a mount script after the OS is fully loaded, or running a cron job to periodically check the status of the share and mount if needed. Good workaround but doesn't address the root cause. Is there any other way (besides the _netdev option) to delay mounting of network shares that appear in fstab until the network interface is up ?
View 14 Replies
View Related
Jan 21, 2011
I have mounted a windows network share using the gnome desktop environment, using Places -> Connect To server.The network share is OK, and I have the icon on my desktop and can see all the files.I want to be able to use this network as well in the console, so I need the mount point.What is the location on the filesystem were this networkdrive gets mounted? I find nothing in /mnt and nothing in /media also using mount to look at the registered mounts, there is no entry for the networkdrive.Nevertheless, I have this networkdrive now open in my desktop, and have an option to unmount it.I know that using the mount.cifs command you can specify the mounting point.
View 2 Replies
View Related
Jan 6, 2010
I wonder how to get Samba share access working well...Dolphin supports Samba but it doesn't really mount anything, it seems... Non-KDE Applications therefor can't access samba that way. In Gnome there was a workaround for the same problem. You could simply go to ~/.gvfs in any application and find the samba mounted there.Is there anything like that in KDE? I set up a Samba mount via /etc/fstab for now but that is quite annoying because it fails after each Suspend, changing WLAN Access Points, etc. Then I have to go to the console and manually launch sudo mount -a to get it working again. How can I make things more comfortable?
P.S.: I'm even up for using something else than Samba to talk to my fileserver. However I don't know of anything that would work better in this regard. (NFS would have the exactly same problem for example)
View 5 Replies
View Related
