I'm using WINE and have to open a share on my network. I go to "My Network Places" and it says it's invalid, I try manually typing in the URI and it says it's invalid. I try to assign a drive letter to the URI and it says it's not a valid drive.
View 9 Replies
I am giving 10.04RC a try instead of Windows 7, so far so good. I can connect to my network shares fine using "Connect to a Server" & bookmark with the file browser, however when I use OpenOffice writer Spreadsheet to open/save files the shares disappear in the"Open/Places". Is this a bug in Ubuntu or Open Office? Is there an update/fix?
View 1 Replies View RelatedI'm running Ubuntu 9.10. I am hooked into my home network with several windows machines attached. On a daily basis I browse the network and use network shares. Today, I can't. Today I can't see any other machines from ubuntu. I haven't changed any settings in Ubuntu, and nothing has been changed on the network, but yesterday it worked fine and today it doesn't.
View 2 Replies View RelatedEnviroment:
-server ubuntu 9.04 with samba
-client fresh ubuntu 10.04
ubuntu is not auto-mounting samba shares. Old 9.04 done it without a problem. I need to type sudo mount -a to have samba mounted.
fstab:
//192.168.1.101/www /mokonawww cifs auto,iocharset=utf8 0 0
ls -l
drwxrwxrwx 25 root root 0 2010-05-03 17:44 mokonawww
Tested with diffrent parameters. And another problem also with samba shares, when I edit file from editor (eclipse) after save i got 'file changed dialog'. seems like file is written with some delay ? and timestamp dont agree (its my blind quess). On 9.04 no problems. Tested with 2 instances of Eclipse. One copied from 9.04 and second fresh install. Other editors raport the same problem. Its anoying as hell.
I am using Xubuntu 10.04 and can't find where I can create shares as well as access network shares. In Ubuntu I just go under Places/Network and there are my shares. How do you do this in Xubuntu?
View 6 Replies View RelatedI successfully connected to my office's (Windows) servers, so usually I can browse for files via Places. But when I want to upload a file for example as an attachment in gmail, after clicking the browse button, only the local drives and folders are visible in the file upload window. Is there some way to tell my browsers (Chromium and FF) there are more drives in life? (I'm using Maverick Meerkat). (And I'm not sure the problem is my browser or my settings or anything else..)
View 1 Replies View RelatedI'm trying to share some folders over the network, but the shared folders are not visible on another computer. This is through double clicking my computer from the Network list in Nautilus. However, I can access the share by typing the full address(<computer name>/<share name>) in "File > Connect to Server...".Since I can't type the address manually from my blu-ray drive, I need to get the shares to show on the network. What is wrong with my settings?
View 2 Replies View RelatedI am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies View RelatedI am trying to access my win7 networks shares with pcmanfm. (I have done sudo apt-get install gvfs-backends). I dont have any pw on my win7 and i dont want one. So every time i try to connect, pcman ask me for pw. How to configure pcman to dont ask me for pw? I have tried linux mint live usb and ubuntu live usb with same result.
View 5 Replies View RelatedI have three computers on the network, one is using Windows Vista, one is in an office room using Ubuntu 10.10, and one is in the living room using Ubuntu 10.10. All three computers have folders shared, and were all three reading files just fine with one another for a couple of months. To share the folders, I just right clicked on them, selected sharing options, and checked the boxes for "share this folder" and "guest access". Both Ubuntu computers have samba installed and configured so the Vista computer can see their shares. Tonight, the Ubuntu computer in the living room stopped being able to see the other computers under places -> network. The other Ubuntu computer and Vista computer can still see each other's shares just fine.
I also created a test share folder with a file in it on the living room Ubuntu computer, and it can be seen by the other Ubuntu computer. I can ping the computer in the living room, and the computer in the living room can ping the other two computers. I set a static IP address on the Ubuntu computer in the living room to rule out an IP address conflict. Under network, if I go to "go -> location..." I'm not quite sure what to type in there to find other computers. Under places -> network, the only thing that comes up on the Ubuntu computer in the living room is it's own shares. I tried using the search feature, but was unable to come up with anything resembling my particular problem within a reasonable amount of time.
I'm in a situation where we might see a few Ubuntu machines added to the fleet of systems here at work (school district). A problem that I'm facing is I would like to do a very, very simple task in Ubuntu, which is to create a shortcut share to a network resource. On Windows, you can right click - new - shortcut - \servershare, done. Then when you click on it, you have the appropriate permissions within the folder based on what permission settings exist on the actual server where the folder resides.
In Ubuntu, the closest I can get is to create these shortcut links on the left side of Nautilus in the bookmark pane. Here's the part that rages me to no end. If I log out and back in, they're ALL renamed to "smb". LOL. What. Really? I'd like to create shortcuts for several network resources. I'd like these links to either be within the Nautilus bookmark area, or within the desktop itself. Ubuntu is on the domain,
Was enjoying my new experiences until I tried to access/see my OpenSuse 11.4 install (Within VirtualBox on Windows 7)I can surf the net and download packages etc but from Windows 7 the Virtual OpenSuse7 does not show up.I know the windows network works because I also have Ubuntu10.4 on VirtualBox and that I can see and access fine.Change to OpenSuse and it all goes down the tubes, doesnt even show up in the Network on Winsows 7With Ubuntu I have etho setup to use DHCP automatically.I've tried numberous settings unsuccessfully on Suse and I think in the process have probably changed something incorrectly, but it didnt show up in Network places even before I started fiddling.Settings within Network Settings are:
1) Global options
Network Setup method: Tradional with ifup
IPv6 Protocol - Enabled
[code]....
I run some IT systems for my schools Engineering student organization.
We are upgrading our systems and I just purchased a new server system which I am configuring.
I am using Ubuntu 10.04 Lucid Lynx and the new likewise-open packages.
The points I bring up following this sentence are to fulfill this final goal : Get SFTP, SSH, and Network Share's over our private network all using the schools Active Directory for auth and it's groups to derive privs.
So... Here's what i've done and what i've tried to do.
1 ) I set up likewise-open and got it to join the domain. When I do this I can ssh to localhost as 'schoolnetworkADname'. So that part works (hurray). To get a network share to use these same auth methods I have tried installing likewise-open-server. Everything launches find and the daemons run, but when I go into computer management on a windows server to set up the actual shares, I get permission denied. The account it is giving permission denied to is the same AD account that join likewise-open to the network, so... what is going on.
2 ) Samba, fail. I can't seem to get samba to run on this machine at all, which is strange because even my Samba expert was puzzled. It just won't let Samba join the domain properly, and due to this, I want to keep on the newer likewise package... unless I have to switch to this.
How I can get the lame likewise-open-server to work?
I need to set up ssh/sftp/network shares all authenticating with AD. I want to use likewise to do the auth, but to mount the network shares I need to use an older version of samba so it can connect with likewise.How can I go about installing an older version of samba onto this new distro of the OS? I've tried installing the lenny and etch versions but I always get an error during install just saying that samba errored.
View 4 Replies View RelatedWhile in a web browser I'm trying to attach a file which resides on a network location. The file dialogue doesn't allow me to browse any network location. I've mounted the volume and added locations to favorites. I've also tried entering an smb:// path. This only happens in browsers, both FFnd Chrome, some examples would be attaching a file in gmail, yousendit, etc. I can browse and work off the network normally in desktop apps.
I'm very new to *nix.
-MacBook Pro
-2.4Ghz, 4GB RAM
-Nvidia 8600M
-Ubuntu 10.04
I often see DBus errors when I unmount network shares (samba). In every instance, they unmount fine. In every instance, I notice no weirdness. Yet these errors randomly come up. There's no pattern to it whatsoever.
View 1 Replies View RelatedWhen I goto Places->Network sometimes I see the other Windows computers in our house, and sometimes I don't. How do I make this more consistent?
When I double click on the "Windows Network" icon right now, I get "Failed to retrieve share list from server". Sometimes this works and I get to see the shares on the Windows pcs.
Using Xubuntu 10.04 to connect to some Windows XP shares by adding lines to fstab. The network shares are not mounted at boot, but can be mounted from the command line, after the OS has booted and everything is up. I am suspecting the network isn't up yet, when fstab is processed. I tried adding the option "_netdev" to the relevant network share lines in fstab, but the shares still don't mount automatically at boot up. I read that this option only works for NFS and I am using CIFS. Can someone confirm that _netdev only works for NFS ?
I've seen solutions involving running a mount script after the OS is fully loaded, or running a cron job to periodically check the status of the share and mount if needed. Good workaround but doesn't address the root cause. Is there any other way (besides the _netdev option) to delay mounting of network shares that appear in fstab until the network interface is up ?
I have mounted a windows network share using the gnome desktop environment, using Places -> Connect To server.The network share is OK, and I have the icon on my desktop and can see all the files.I want to be able to use this network as well in the console, so I need the mount point.What is the location on the filesystem were this networkdrive gets mounted? I find nothing in /mnt and nothing in /media also using mount to look at the registered mounts, there is no entry for the networkdrive.Nevertheless, I have this networkdrive now open in my desktop, and have an option to unmount it.I know that using the mount.cifs command you can specify the mounting point.
View 2 Replies View RelatedI wonder how to get Samba share access working well...Dolphin supports Samba but it doesn't really mount anything, it seems... Non-KDE Applications therefor can't access samba that way. In Gnome there was a workaround for the same problem. You could simply go to ~/.gvfs in any application and find the samba mounted there.Is there anything like that in KDE? I set up a Samba mount via /etc/fstab for now but that is quite annoying because it fails after each Suspend, changing WLAN Access Points, etc. Then I have to go to the console and manually launch sudo mount -a to get it working again. How can I make things more comfortable?
P.S.: I'm even up for using something else than Samba to talk to my fileserver. However I don't know of anything that would work better in this regard. (NFS would have the exactly same problem for example)
Question 1.I have strange problem in OpenSUSE 11.2I have /etc/fstab entry:
//server/projects /server/projects cifscredentials=/root/.credentials,dir_mode=0777,file_mode=0777,_netdev 0 0
service network running
[code]....
I followed samba setup per thread Samba and Suse: HowTo Set up an openSUSE-Windows Home Office LAN/Network. Versions 11.x and then upgraded my samba from the special repository per advice at Samba broken after latest security update 11.2 - openSUSE Forums I can now see all my boxes on the network from either an XP or linux box and I can access my linux shares from any XP box but I can't access any XP share from my linux box (openSUSE 11.2). I get an error that reads "The file or folder smb://SharedDocs does not exist"I can see the SharedDocs folder under the XP box in samba shares though. And it really does exist on the XP box.
View 9 Replies View RelatedUsing SuSE 11./4 on two machines. Successfully set up a server to share a folder. The client is able to read files from the folder, but not write to them.the client perspective, the shared folder permissions are read and write if owner, read only for all otherHowever, the server shared folder has been set up for sharing, and the permissions are set for read and write to all.
One more thing. When the client goes into the samba share, it sees the workgroup. Clicking into that, it sees the name of the server computer. Clicking into that,it sees two folders: "profiles" and "users". Clicking into "users" goes into the shared folder. I tried setting the permissions from the client side on the "users" folder using root privileges to allow reading and writing without any success
I'm running 64 bit Lucid on a HTPC that is networked with a Windows 7 64 bit laptop. Up until this morning, sharing media between these two worked fine. When I attempted to connect through Rhythmbox to play music, the computer couldn't find the files. I attempted to access the network through Nautilus and it was unable to mount the location. So I tried the Create Launcher command and created a link of the network on the desktop. I was prompted to login and it worked perfectly This has happened once before and the only way to fix it was to reinstall Ubuntu.I would very much like to avoid that if possible as the system is setup perfectly.
I wouldn't bother with the issue if it didn't prevent me from adding my music files to Rhythmbox. I have run findsmb as well as smbtree. Smbtree returned nothing and findsmb had a dotted line with nothing underneath. Nothing has been removed. I did install security updates this morning, but since it has happened before, I am more inclined to thing it is a bug or conflict somewhere.
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
I have ubuntu 10.04. After update I performed yesterday, I could no longer access from other computers shared folders on my ubuntu machine. I checked update history and it included the following that appeared to be related to network shares:
Code:
libsmbclient (2:3.4.7~dfsg-1ubuntu3.4) to 2:3.4.7~dfsg-1ubuntu3.7
libpam-smbpass (2:3.4.7~dfsg-1ubuntu3.4) to 2:3.4.7~dfsg-1ubuntu3.7
samba (2:3.4.7~dfsg-1ubuntu3.4) to 2:3.4.7~dfsg-1ubuntu3.7
samba-common (2:3.4.7~dfsg-1ubuntu3.4) to 2:3.4.7~dfsg-1ubuntu3.7
[Code]..
I would prefer to use the latest version because it includes security updates. Does anyone know if there's some trick to getting network shares to work with the latest version of libsmbclient?
I have a Thecus NAS with nfs support running. Now I switched from OpenSUSE 10 to 11.2 on the client side and aren't able to mount my nfs shares. With SuSe 10.0 I didn't have any problems.
The /etc/exports:
/raid/home_nas1 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
/raid/soundandmore 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
On the client side I'm able to see the shares:
showmount -e nas1
Export list for nas1:
/raid/home_nas1 192.168.0.24/31
/raid/soundandmore 192.168.0.24/31
The client address:
inet addr:192.168.0.27
I'm using nfs-3:
mount -t nfs nas1:/raid/soundandmore/mnt
mount.nfs: access denied by server while mounting nas1:/raid/soundandmore
I can't for the life of me figure out why I cannot browse my own shares from my linux boxes. both run OpenSuSE 11.3 I follow swerdna's tutorials and reboot several times but don't have a clue as to whats going on to prevent me from viewing localhost shares or 2nd linux box shares. I get 'unable to mount location, Failed to retrieve share list from server' error when I click on my workgroup icon in nautilus.
View 7 Replies View RelatedI am posting this as I have tried several times to work this out. I have read article after article, post after post and tutorial after to tutorial to sort this issue. I have an Ubuntu 10.04 machine running as the LDAP and NFS server with two Opensuse 11.3 desktop machines. Both of the Opensuse machines can login using the LDAP server for authentication and this works fine. The server also exports the NFS Shares no problem but I am unable to mount the shares from the Opensuse machines. I have been using Yast, NFS Client to mount them.
Yast NFS Client can see the shares and lists them however when I apply the settings it states:
'Unable to mount entries in etc/fstab' I need to mount the shares according to the LDAP details as I want the users to be able to access their files no matter which machine they login at. Can anyone shed any light on the issue. Any help would be great and I would be enternally grateful as I am now beginning to pull my hear out slightly.
Having a bit of a minor issue with samba on Opensuse 11.4 64 bit. My problem is that I can't view my samba shares in Dolphin although I know they are there. If I bring up dolphin using the Opensuse shortcuts to samba I get this
My computers / drives attached to my network should be viewable here yet they are not. However, if I type in the address directly I can view and access my shares.e.g.
Here is a copy of my smb.conf
Code:
[global]
workgroup = farcusnet
netbios name = ThinkPad
passdb backend = tdbsam
name resolve order = bcast host lmhosts wins
printing = cups
[Code]...
