When I goto Places->Network sometimes I see the other Windows computers in our house, and sometimes I don't. How do I make this more consistent?
When I double click on the "Windows Network" icon right now, I get "Failed to retrieve share list from server". Sometimes this works and I get to see the shares on the Windows pcs.
I'st just installed 10.10 on Virtual Box. I'm trying to map some windows drives (On the host) permanently. Using Places->Connect To Server etc I can connect to my windows box no problem and see the directories etc in Nautilus (2.32.0) all ok.But rebooting the system results in my having to log in again - I've looked atis that the only what to get this to work permanently?Also, and more importantly K-Develop (And possibly others) can't see this mapped drive when I want to open a file from it? What would be the problem here?
View 4 Replies View RelatedI am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies View Relatedboth are running 9.04i have samba installed on both, each computer can ping the other, they each have a folder that is being shared, and they each can see a third computer that has windowsxp on it. however, they cannot see each other.not really sure what is going on.went to places/network and nothing shows up except the windowsorkgroup/computer.
View 7 Replies View RelatedI marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
i have a ubuntu 10.10 desktop and laptop. i installed samba, and smbfs. i shared a folder on each computer. when i browse the network i can see the laptop from the laptop, and can see the desktop from the laptop, but i cant see the laptop from the desktop. when i try to mount the share it says unable to mount, but mounts it anyway...but, i need to be able to mount it so that rsync will see the shares as a dir on the desktop. i tried manually mounting via smbmount following several threads that i found, and i keep getting error sudo smbmount //192.168.1.78/share /media/laptop Password: Unable to find suitable address
that is as far as i've been able to get. i've looked and have only been able to find threads about windows shares, not between 2 ubuntu machines. and i dont know why laptop can see the desktop but not the other way around. they have identical smb.conf files
1. Maverick Meerkat 10.10
2. Vista Ultimate
I'm successfully connecting to my Vista desktop via my laptop running MM;I can view my shares but not all my data. All top level shares seem to be visible, it's when I go deeper that I notice not everything is showing up. The folders are accessible if I type the full path, and then again I have the same issue once I'm inside that folder where not all data is visible.
In Nautilus setting: Edit>Pref>Preview Tab.I set preview for all files under 4GB which is the upper limit I can set.This made more files visible but not everything.I attempted to divide the directories in order to halve the size of the folders, this helped but not completely. The directories contain movie and picture files. The picture files are easier to divide more equitably between folders, but the movies being so large, managing folders sizes in that way doesn't help. I really don't want to divide my files according to this problem anyway. Sorting does not affect which folders and files are shown. Nothing is hidden, options to show hidden files on amd off, no help.
I can't for the life of me figure out why I cannot browse my own shares from my linux boxes. both run OpenSuSE 11.3 I follow swerdna's tutorials and reboot several times but don't have a clue as to whats going on to prevent me from viewing localhost shares or 2nd linux box shares. I get 'unable to mount location, Failed to retrieve share list from server' error when I click on my workgroup icon in nautilus.
View 7 Replies View RelatedI am currently trying to figure out what's the best way to backup several PCs (about 5 computers each with Windows 7) from my family.
As I want the same solution for all Computer - I set up my old computer (Windows 7) and added some hard drives and there should now be enough space to backup the data of everyone from my family via the network. (Lets call this computer "Server")
But now I am wondering whats the best way to do this? What I do not want:
I do not want to start the Server each time manually when a computer tries to backup. (I thought about using WakeOnLan.. but I do not know if this is a good idea) I do not want the Server to run permanently I do not want to make the backups manually they should backup about every week automatically.
So which Software on the Computers / or the "Server" would you recommend?
Or would you eve recommend me to use Linux on the Server? If so, which Software would you use then?
I am using the mount command to mount Windows shared folders are another machine on my LAN, to have them show up in the Linux filesystem. The command mounts the folders just fine, however the access is read-only.
In the command, I am also using the -o option to specify a username and password that should have full access. Also, I have used this identical command on my other distros and it seems to work fine. I've Googled high and low, trying to find a way to specify a Samba user/password for authentication. I know one of the other distros had a program that I could specify a Samba user/password to simulate a Windows login.
I installed 11.2 a couple weeks ago on a machine at work, and thru YaST connected to the domain. I was then able to add a printer, and thru nautilis browse to windows computers with shares. Something changed about a week ago and I've played with everything I can think of, read lots of tutorials, and still can't make it work. I'm about ready to format and reinstall from scratch and try again, as I'm out of ideas.
So the way it was before, in nautilus if I clicked on network it would give me a list of all sorts of computers on my domain, and if I clicked on one of the windows machines it would ask me my username/password, and after I entered them, I'd be in.
Now, in nautlis if I click on network it shows me "windows network" and if I click on that it gives me a list of all sorts of workgroups and domains (or something like that). If I click on the one with my domain name, it asks username/password but it doesnt work.
I've tried leaving the domain and rejoining, I've enabled and disabled kerberos, ldap, samba, everything I can think of - although I dont think I had to change those at all from default the first time.
I dont know what I could have done between when it worked and now. I did allow some installation of updates. Shortly thereafter I noticed ssh no longer worked, and after playing with it forever I couldnt make it work, I uninstalled openssh and then reinstalled it from the repository, and it worked again. No idea why it stopped working, but maybe it's related to this domain problem, I dunno.
My main goal at this time is to be able to access windows shares from the linux machine. I don't care if I have to login to linux with my windows domain account or a local account (although all the documentation I've followed said that I should be able to login with a domain username/password too).
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
im trying to connect two computers on lan.One computer has: VMWare Workstation and has Opensuse 11.3 mounted in it.The other computer has: VMWare Player and has Opensuse 11.3 mounted in it.Both computers are connected to a switch with cables.I have followed this guide in both computers:Depanati singuri calculatorul!: Opensuse 11.3 - configure local networkin order to setup a network.In one computer, if i go to: Computer---Network---Network folder, i only see one machine. When in fact i could see both of them right
View 9 Replies View RelatedSimply share a printer in a small, secure home network spread over 5 or 6 machines running mostly windows (98 through Win7) but using the UBUNTU box as the host for the printer.
The network has basic connectivity. I have no problem pinging any box from any box. Or surfing from any box.
From UBUNTU box, can see and browse Windows Workgroup no problem.
Windows machines see the announcement of UBUNPRIN but cannot connect. Cannot seem to authenticate. I'm thinking that I have the share set up with NO security.
security = SHARE
And
map to guest = Bad User
Adding some terminal output and the smb.conf file...
Clip from log.nmbd:
When I try to use Nautilus to connect to another computer on my network, and I attempt to connect using the name of the Windows XP computer I am connecting to, I get the following error; Could not display "smb://computername/". Error: Failed to retrieve share list from server Please select another viewer and try again. However when I attempt to connect using the IP address on the network, it connects instantly. smb://192.168.1.101/ Why doesn't it connect using the computer's name? What am I doing wrong?
View 3 Replies View RelatedDoes anyone know of an app that I can use to view all the computers connected to my network and the IP addresses to those computers?
View 8 Replies View RelatedI'm running Ubuntu 9.10. I am hooked into my home network with several windows machines attached. On a daily basis I browse the network and use network shares. Today, I can't. Today I can't see any other machines from ubuntu. I haven't changed any settings in Ubuntu, and nothing has been changed on the network, but yesterday it worked fine and today it doesn't.
View 2 Replies View RelatedI've recently switched to Ubuntu from debian, and I'm now running a fresh install of 9.04 32 bit. I have a Windows XP media computer which I would like to be able to browse using smb://. This worked fine on my debian system, but I cannot get it to work on ubuntu. The windows XP machine has a couple of shares, e.g Music. I can access the Music share via smb://, but I cannot write to it. Nautilus just says "Permission denied". I can also see the default shares, e.g. E$, but if I try to open them I am prompted with a password, but no matter what I enter it seems to have no effect. How to proceed?
View 8 Replies View Relatedi have 3 ubuntu machines running 9.10. All of them are running SMB so that the Windows machines can access the shares on the Ubuntu machines, but the ubuntu machines can not access shares on the Windows machines. When I click to connect to a windows machine ( all of them running XP), it says "connecting to COMPUTERNAME.." It never opens the computer, and it always comes back with an error saying that it failed to connect. I haven't been using ubuntu for very long, so im not as savvy with it as I am on windows. All windows machines can see all ubuntu shares, just not the other way around and I'd like it to be both.
View 3 Replies View RelatedRunning Ubuntu 10.10 M-M..Running Network, my machine sees my Windows Workgroup, and even the machines on the workgroup. When I try to access those machines, I get a message "Failed to retrieve share list from server." I've been able to mount other machines by using straight IP accesss, but that is of little use since IP addresses are not Static.
View 6 Replies View RelatedJust installed 10.04 LTS beta on 3 computers in home. At first, two of them showed up under the network window using places. The third never did and would not find the shared printer. After all rebooted, none show up. All three can access the internet and can display a valid internal network ip address using ifconfig.
View 1 Replies View RelatedFor some reason, all the computers on my network can't reach each other via their host names. For example, the ping command doesn't recognize host names:
Code:
$ ping file-server
PING file-server (208.68.139.89) 56(84) bytes of data.
^C
--- file-server ping statistics ---
20 packets transmitted, 0 received, 100% packet loss, time 19152ms However, ping works fine if I use IP addresses instead. I would put the address for "file-server" in my /etc/hosts file, except for the fact that DHCP changes it's address occasionally.I attempted changing the line
send host-name "<host-name>";
in /etc/dhcp3/dhclient.conf to
send host-name "file-server";
but to no avail.
what I want to achieve is just to be able to say to who ever is killing our relatively fast connect that they aren't the only person using the network. Everyone just says "I hardly download anything." which is obviously untruthful as normally I can download at 1.5 MB/s but now loading even google.com takes way too long (same with pinging and all other sites). Once I do this, I can determine whether or not I need to call my ISP and do the long 'on hold' dance and "have you tried rebooting the router" BS.
View 8 Replies View Relatedbut Im thinkng of completely switiching to Ubuntu,But all of my friends are on Windows...We have a LAN of abt 100-150 .. Is there is any GUI software thru which I can see all the files which are being shared on the network by Windows PCs,I know abt Samba ...but that is only computer specific & also that is reverse way...& doing from command will be tiresome task for all PCs.
View 3 Replies View RelatedI'm trying to share some folders over the network, but the shared folders are not visible on another computer. This is through double clicking my computer from the Network list in Nautilus. However, I can access the share by typing the full address(<computer name>/<share name>) in "File > Connect to Server...".Since I can't type the address manually from my blu-ray drive, I need to get the shares to show on the network. What is wrong with my settings?
View 2 Replies View RelatedI am trying to access my win7 networks shares with pcmanfm. (I have done sudo apt-get install gvfs-backends). I dont have any pw on my win7 and i dont want one. So every time i try to connect, pcman ask me for pw. How to configure pcman to dont ask me for pw? I have tried linux mint live usb and ubuntu live usb with same result.
View 5 Replies View RelatedI have three computers on the network, one is using Windows Vista, one is in an office room using Ubuntu 10.10, and one is in the living room using Ubuntu 10.10. All three computers have folders shared, and were all three reading files just fine with one another for a couple of months. To share the folders, I just right clicked on them, selected sharing options, and checked the boxes for "share this folder" and "guest access". Both Ubuntu computers have samba installed and configured so the Vista computer can see their shares. Tonight, the Ubuntu computer in the living room stopped being able to see the other computers under places -> network. The other Ubuntu computer and Vista computer can still see each other's shares just fine.
I also created a test share folder with a file in it on the living room Ubuntu computer, and it can be seen by the other Ubuntu computer. I can ping the computer in the living room, and the computer in the living room can ping the other two computers. I set a static IP address on the Ubuntu computer in the living room to rule out an IP address conflict. Under network, if I go to "go -> location..." I'm not quite sure what to type in there to find other computers. Under places -> network, the only thing that comes up on the Ubuntu computer in the living room is it's own shares. I tried using the search feature, but was unable to come up with anything resembling my particular problem within a reasonable amount of time.
I setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300]
path = /media/Secondary Storage
available = yes
browsable = yes
public = yes
writable = no
[500]
path = /media/New Volume
available = yes
browsable = yes
public = yes
writable = no
Been trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
After running updates earlier today, none of my Ubuntu-based computers can connect to any Windows shares in Nautilus.Samba is running and working fine; I can access the shares via web browser using smb://hostname, so I know it's not an issue with Samba not working.Also, the two Windows-based computers can see each others' shares, including printers.
View 3 Replies View Related