I've installed and reinstalled the Tool several times and it doesn't do anything. I get the prompt to input my password, which I know I put in correctly. It then just disappears. If I try running the tool again, I see a window pop up at the bottom of my screen for a half a second then disappear. I'm running Maverick with Win7 dual-booting and trying to use the tool to auto-mount several partitions
View 3 RepliesSo I've installed Ubuntu 10.10 from fresh. I do dual run with Windows and i like to share the folder with Win, so I need ntfs-config tool to automount the Win-Data partition. Installed ntfs-configuration tool and wont launch, tried through console and got:
Traceback (most recent call last): File "/usr/bin/ntfs-config", line 102, in <module>
main(args, opts)
File "/usr/bin/ntfs-config", line 75, in main
app = NtfsConfig()
File "/usr/lib/pymodules/python2.6/NtfsConfig/NtfsConfig.py", line 56, in __init__
os.mkdir(HAL_CONFIG_DIR)
OSError: [Errno 2] No such file or directory: '/etc/hal/fdi/policy'
When logged in as my standard user in Fedora 11 gnome desktop the installed ntfs-config tool will not open and gives an error which says this; "no authentication program found", and to run that ntfs-config as the root in a terminal. So then the only way to open that tool is to type that in a terminal, and it did open, but how can I fix this ? Can this issue be related to ownership and permissions of it ? Also the num lock does not come on during boot up, is there a easy fix for that too ? This is a recent fresh updated install from the DVD with the ext4 file system. All the ntfs-3g applications are installed as default, so I just added that enable ntfs write support tool with the package manager.
View 2 Replies View RelatedI've been using Knoppix "Live CD" 6.2 and partimage 0.6.7 to back up and restore my Microsoft Windows XP system volumes on various computers. However, partimage seems to be unwilling to back up one of these NTFS volumes which has bad sectors, some unreadable data. It hits that and stops. But this appears to happen at the same place when I have already used Windows to find and mark and, I assume, remove from use, the bad sectors. Hmm. I thought they'd be ignored. It appears I thought wrong.
If so, which of several other Linux-based or other partition backup tools may be suitable for the task - to ignore or tolerate bad sectors? The main goal is to be able to update the volume subsequently in a way that may be a terrible mistake, and in that case to restore the previous version. Sometime not too far in the future, I suppose I have to think about replacing the disk.
What's the best tool or method to resize an NTFS partition containing Windows XP Home but with some evidence of being installed using Windows Vista? (Possible answer: Windows 7...) I bought a Fizzbook Spin, UK version of Intel Classmate PC with touchscreen. Disk is about 55 GB; I want to resize system partition C to about 17 gigabytes and then maintain it using something like partimage on live CD/DVD/USB for complete backup of volume: 15 gigabytes roughly compresses to one DVD, 2 gigabytes for hibernation memory storage which I won't back up (and can't move off C), pagefile on the next volume (probably 4000 MB on FAT32, an affordable commitment of disk space to buy not worrying about the page file size). Plus, I will be able to store the backup of volume C on volume D.
The machine can boot Linux (Knoppix 6.2) from external DVD drive, from a USB flash memory key, and from SD[?HC] card. I don't have a separate Windows install CD or recovery partition, but there's an Intel tool to generate a recovery, um, stick. There's evidence that XP's partition was created by Vista, as follows: 1 MB unused before the system partition; an error message about "correcting errors in the uppercase file" which apparently means "Vista did something on this disk that XP thinks is wrong, but this is not serious" - and several attempts to resize the volume with GParted have left Windows unbootable, blue-screening for a split-second and then rebooting. Apparently that's a Vista experience, and it would've been really bad if I hadn't taken a backup already.
I'm pretty sure that in at least one attempt, I remembered and successfully turned OFF the default-on "Round to cylinder" option in GParted... or is that WRONG? Standard Vista/Parted/resize advice (before 2010) such as [URL] seems to be "Use GParted, then use the Windows Vista installation CD to make your ruined hard disk partition properly bootable again." Since I don't have a Vista installation CD to use or legally borrow for this computer - unless I buy Vista or Windows 7 (which I'm considering anyway, for speech recognition) - I appear to be stuck. I do have more than one other XP computer, in case I can use something from there to exorcise the Vista-ness. But I want to keep the extra software (and device drivers) supplied with this little computer.
I have inherited a web configuration tool based on mojoportal (which uses C#). As the web server hosting this site is on a Linux machine (currently Ubuntu + mono), I would like to recreate it in a more Linux-natural environment.
The web application I inherited needs to allow creation of configuration profiles for other Linuxes(including setting their IP tables, QoS and many other network protocols). These profiles are downloaded by the Linux clients and a local parser does the configuration accordingly.
The main properties I need are:
* Receive and display a lot of structured data to the user (i.e. iptables chains or QoS hierarchies) and of course process it
* Manage several users with different permissions
* Use MySQL as the database
* Allow FTP access to receive configuration files created
* Display monitoring data and graphs (a low-level NMS)
I do not need forums, blogs or any other user input apart from entering data in the forms (possibly a text editor, but that's about it)
I used to be very proficient in Python and Perl (so am sure it would be easy to regain these abilities) and am versed in SQL. I know HTTP and CGI but never worked with PHP.
I tried installing NFTS Configuration Tool to auto-mount several partitions at startup, but the Configuration Tool isn't working. I've entered the terminal line to update it, but it still won't even start.
What happens is when I click on NFTS Configuration Tool under System - Administration, I'll get the prompt to enter my Administrative password. I enter it and click Ok, but then it just disappears. If I try running the Tool again, I see a window come up at the bottom of my screen titled 'System Administrative' for about half a second then disappear. If I restart or suspend and try again, I still get the same nagging problem.
I noticed, that the "official" Compiz-Configuration-Tool is not functionable. I change the properties of some effects, and even after reboot, no change can be seen.Then there is the tiny Fedora-Compiz-Tool. The settings I'm setting here are applied immediately.Is that a normal behaviour? Could it be that the official Compiz-Config-Tool is not compatible with the Fedora-Compiz?
View 2 Replies View Relatedi installed blender, and the top tool bar doesn't work. (file, add, timeline, etc)
I roll over, they sense me rolling over, but click on it doesn't work
everything else in blender seems to be running fine
Runing 10.04, same prob with 9.10
Is there a command line tool to shut off/spin down the hard disk either when not in use or when something is typed into the console? I'm trying to save power in a laptop I have..
View 2 Replies View RelatedI just upgraded (via backup and install) from 11.1 to 11.2. SaX2 was perfect for configuring my IBM SpaceSaver (Trackpoint) USB keyboard, and my Logitech Marble Mouse. Now that SaX2 doesn't have the keyboard or mouse, eh... modules?, I don't know how I can configure them the way I'd like.
What now? I'd rather not have to use the on-screen keyboard every time I start up openSUSE to turn off NumLock... Do I have to manually edit /etc/xorg.conf now?
I just did a clean install of Ubuntu 11.04 yesterday on my laptop. My laptop has three partitions. One for Win 7, one for Ubuntu, and another for data. The data partition is formatted NTFS and I'd like to have it mounted on startup. I had done this before using NTFS Configuration Utility and it worked great. Unfortunetly after installing Natty it seems to no longer work. Whenever I open the program from the app drawer it asks for my sudo p-word and then nothing happens. Nothing pops up... If i try to run it from terminal using
gksudo ntfs-config
The same thing happens but I do get the below text in term
[Code]...
I have partitioned my hard drive into three parts: 1 lean section for windows 7 (50 gb), another section for ubuntu 11.04 (50 gb) and one final massive section for 'storage' (360-ish gb). I have been following the following guide to accomplish this process:I am lost in the final stages of the process. The article says that:"Ubuntu won't "mount," or make available, your Windows 7 and Storage drives on boot-up, however, and we at least want constant access to the Storage drive. To fix that, head to Software Sources in the System->Administration menu. From there go to Applications, then the Ubuntu Software Center at the bottom. Under the "Ubuntu Software" and "Updates" sections, add a check to the un-checked sources, like Restricted, Multiverse, Proposed, and Backports. Hit "Close," and agree to Reload your software sources."
I completed this but I did not get the "reload your software sources" option. Then the article says:"Finally! Head to the Applications menu and pick the Ubuntu Software Center. In there, search for "ntfs-config," and double-click on the NTFS Configuration Tool that's the first result. Install it, then close the Software Center. If you've got the "Storage" or Windows 7 partitions mounted, head to any location in Places and then click the eject icon next to those drives in the left-hand sidebar. Now head to the System->Administration menu and pick the NTFS Configuration Tool."I was able to install NTFS Config. However, when I click on it and enter my administrative password, it does not launch.
I do not know how to get around this, I did some research online but was not able to find any solutions.I do not fully understand what ntfs config will accomplish, but I think it has something to do with accessibility to the storage partition from both windows 7 AND linux.The article says:"You'll see a few partitions listed, likely as /dev/sda1, /dev/sda2, and the like. If you only want your storage drive, it should be listed as /dev/sda3 or something similar--just not the first or second options. Check the box for "Add," click in the "Mount point" column to give it a name (Storage, perhaps?), and hit "Apply." Check both boxes on the next window to allow read/write access, and hit OK, and you're done. Now the drive with all your stuff is accessible to Windows and Linux at all times."
I am trying to find a best tool to track configuration files changes. I did find some information about osec and mactime, but, it seems, that they are not included in fedora/rpmfusion package databases. is there any tool that can be installed as a package?
View 8 Replies View Relateddoes anyone knows if i can find a configuration tool like "Yast" that works on Solaris 10 ?
View 1 Replies View RelatedIs there any Linux tool to create new or modify exiting key/value pairs in text configuration files? For example, to change a setting in xorg.conf, or change something in etc/networking/interfaces? I know it could be done by sed or by perl scripts, but it could be easier to have a program for this purpose. There are many difficulties for this job that the program should consider, and I am facing nearly all of them:
- Some configuration files may have sections. Like in Windows-type INI files (for example: "[something]"), or like Section in xorg.conf. More sections with the same name can occur, like in xorg.conf.
- If the key/value pair originally does not exist, then the program should add it. But not to the end of the file, but tothe end of a predefined section.
- Config files can have remark lines. Remark text can be even at the same line than the key/value pair. After modifying the value, the original remark text should not change at the end of the line. The remark-starting symbol is not always.
- The values in configuration files are not always simple numbers or simple words, but in rare cases, they are composed by more words, for example: item=name address phone
And of course, we can have remark at the end, like this: item=name address phone # remark text
- The key-value separator depends on the file. Some files use "key=value" format, some other use "key value" format, or even "key1 key2 value", like xorg.conf. The as separator can also occur.
- Case sensitivity can also be an issue.
- Sometime to desired task is not to modify a value, but to add or remove a line beginning remark to a certain line.
I think that managing all these possible cases by a perl or sed program is nearly impossible. I begun to write a C program, but maybe there is already one?
Using jessie over 4.2.8 or 4.3.4 kernel.
Used both the default bluez package, 5.23 and building bluez 5.36 by hand.
hciconfig shows a good configuration,
hci0: Type: BR/EDR Bus: UART
BD Address: 78:A5:04:31:3C:4B ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:82105 acl:0 sco:0 events:1989 errors:0
TX bytes:516 acl:0 sco:0 commands:48 errors:0
hcidump -x does show Commands/Events received, beacons are being seen, and collected by our app.
> HCI Event: LE Meta Event (0x3e) plen 42
LE Advertising Report
ADV_IND - Connectable undirected advertising (0)
bdaddr F9:77:66:E8:F7:8B (Random)
Flags: 0x06
[Code] ....
However when the app tries to connect it always gets connection refused at gatt_connect.
gatttool behaves the same way, and hcidump does not show any connection attempts, implying no connection between gatttool and the device, although it is specified on the command line.
Finally although the bluetoothd is running bluetoothctl also shows no default controller found. I had edited /etc/bluetooth/uart.conf, adding an hciattach entry for the device but that changed nothing when restarting the bluetoothd. Entering a garbage entry into that file does not produce any errors, so I am not sure it is even being read.
Also systemctl|grep bluetooth shows :-
sys-devices-virtual-bluetooth-hci0-rfkill0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0/rfkill0
sys-devices-virtual-bluetooth-hci0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
bluetooth.target loaded active active Bluetooth
/sys/devices/virtual/bluetooth/hci0/address shows the correct MAC, but /sys/subsystem/bluetooth/devices/hci0 does not exist, a post elsewhere indicated this was not a problem but that seems odd.
Is the uart.conf file still used([URL] .... would suggest yes) and if so is the format a full hciattach command or merely the hciattach parameters?
I am demo'ing Kubuntu 9.04 workstation to a customer. He has a CentOS 5.3 server (my doing). On it is our CUPS Network file server. Everyone (65 of them) print to our network printer through it using LPR/LPD (and sometimes Samba).
Problem: when Kubuntu's Print Configuration Tool went looking for printers, it found every network printer's IP address, but missed my CUPS printer server. What did I do wrong on one or both ends (I have control over both).
Got a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.
View 14 Replies View Relatedwhen I type 'fdisk -l' I get the following:
Device Boot Start End Sectors Size Id Type
/dev/sdb1 16065 584830259 584814195 278.9G f W95 Ext'd (LBA)
/dev/sdb5 16128 584830259 584814132 278.9G 7 HPFS/NTFS/exFAT
I have 2 hard drives both are 278.9GB in a mirror raid 1. Why does 2 partitions show up? Are they referring to each physical hard drive? I want to believe that this is the same partition and not two different physical hard drives since both are in the same 'start' and 'end' range. Is that correct?
I'm using debian 5 x64 with xfce.Is there a way to configure (start/stop/restart) services (especially Apache2, mySQL and PHP) using a graphical or cli tool? I tried to use sysv-rc, sysv-rc-conf, rcconf and rc-conf in the terminal but Bash didn't find them (Although Synaptic show that sysv-rc is installed).
View 9 Replies View RelatedAm I right in thinking that the system-config-httpd tool doesn't work in Fedora 13?
View 1 Replies View RelatedI had a Linux server with Wheezy, I have 2 internal drive, one for linux OS, the other our Video On Demand drive that must be accessible to Windows and online. (That's why I chose NTFS, with our large video files, FAT will not work, and EXT isn't compatible with windows sharing, and I haven't gotten FTP to work right .
So I upgraded to Jessie today, and everything went smoothly until I tried to access my NTFS drive. (Named WowzaStorage)
I used FSTAB to auto-mount the drive (/dev/sdb1) to /media/ntfs/ on boot. All of this worked swimmingly on Wheezy, but since the update, something got mucked up and I cannot figure it out.
When accessing the mounted NTFS folder in /media/ (if it even shows up) gives me a 'Cannot be found' 'Input/Output error'
When in gParted to examine the drive, I can select it and view all the correct info, but I keep getting "error informing the kernel about modifications to partition /dev/sdb1/ --invalid argument"
Now first I thought maybe the NTFS driver was faulty and I removed 'ntfs-3g' and reinstalled it.
Now when I am in Terminal, after i umount and mount sdb1, I can CD to the drive but not the folders on it... Also using the File Browser, I get errors, and missing folders.
I get "Unhandled error message: Error when getting information for file '/media/ntfs': Input/output error"
I have successfully mounted my Win7 volume and my external hard drives NTFS volume as well. However, after modifying the fstab I seem to only be getting the win7 volume to auto-mount. Below is the contents of my fstab. /dev/sdf3 is not mounting. Again, it works no problem if I manually mount it.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
I`m unable to mount my second hard drive I use to store my music and pics and wonder if it is to do with the error "failed to initialise HAL!" which I get every time I start Debian Lenny (AMD64 architecture). I have had this since doing an install (fresh) a few hours ago.
The drive is an ntfs one but when I click its icon in the computer section it says it cannot mount it and gparted says it cannot read the file system.If so how would I get the error box to stop appearing and how do I mount the ntfs drive?
I'm trying to monitor the temperature of my GPUs (multiple ATI 5970) in my computation cluster. Problem is that the aticonfig tool does not work in headless mode
# /usr/bin/aticonfig --od-gettemperature No protocol specified ERROR - X needs to be running to perform ATI Overdrive(TM) commands
and even worse if I try to run aticonfig with my monitoring user (munin) it will ask to be executed as root. Is there a simple way to read the temperature of the GPUs without having to resort to X?
From a Win 7 client, I can copy/create/delete any files on any share on the Ubuntu Samba server so long that is part of my nix file system which is all ext4.This box also has and NTFS partition on it primarily for storage. I can copy/create/delete anything on this partition form the same Win 7 client with the exception of Quickbook save files.I have scoured the web looking for anything close to this but have yet to find anything that looks similar. Not lloking for a direct answer but if there is anyone else that has issues copying specific types of files to a Samba NTFS partition.
View 3 Replies View RelatedI want to boot a livecd and use fill to fill my HDD with random data to do secure deletion of files.
But im wondering. Does SFILL work on NTFS partitions?
I have a Western Digital 3TB USB drive connected to a Raspberry Pi 2 running Raspbian Jessie. I created an 30GB ext4 system partition and a NTFS Data partition using the remainder of the drive. I formatted the NTFS partition as follows:
sudo mkfs.ntfs -Q -L Data /dev/sda2
The drive works fine on the Pi but when I connect it to a Windows 7 pc the pc doesn't recognise the format of the Data partition and can't access it.
On the Pi I ran:
$ sudo fdisk -l /dev/sda2
Disk /dev/sda2: 2.7 TiB, 2968557453312 bytes, 724745472 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
[Code] .....
Partition table entries are not in disk order.
When I plug in my external USB Hard drive which is formatted as a single NTFS partition, it is recognized and mounted automatically, a nautilus window pops open. Unfortunately it is not writable. The reason is: the partition is mounted "ntfs" (which lacks write support) instead of "ntfs-3g". This is the output of mount after plugging in the drive:
$ mount | grep sdc1
/dev/sdc1 on /media/4EBC5FB82435B0EE type ntfs (rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,dmask=0077)
I want this partition to be writable by just plugging it in.
The partition should not have any errors because a) I fsck'ed it windows and b) mounting it manually works:
$ sudo mount -t ntfs-3g /dev/sdc1 /media/disk_/
$ mount | grep sdc1
/dev/sdc1 on /media/disk_ type fuseblk (rw,allow_other,blksize=4096)
$ devkit-disks --mount-fstype ntfs-3g --mount /dev/sdc1
Mounted /org/freedesktop/DeviceKit/Disks/devices/sdc1 at /media/4EBC5FB82435B0EE
$ mount | grep sdc1
/dev/sdc1 on /media/4EBC5FB82435B0EE type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
$ gnome-mount -nbtd /dev/sdc1
$ mount | grep sdc1
/dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
How can I get ntfs drives to be mounted as writable by default, preferrably without having to modify fstab?