Ubuntu :: NFS Install Messes Up Server
Jun 25, 2010
I am new to Linux and I am having a huge problem after install nfs-kernel-server. I run "apt-get install nfs-kernel-server". It runs and says it installs without errors, at least what I saw. Also the syslog was clean of errors related. Where the problem happens is when I try to start the NFS server and also on boot. When I start the service manually, it says starting portmap and ...something else. Then it gets to the point of saying it is starting the NFS server and crashes and I have no prompt. On some cases I can break out of it with (ctrl+c).
The problem that happens on boot...and this is only happens after nfs-kernel-server is installed. I reboot and I have no prompt. The only thing on the screen is a message complaining about something related to fsck, the odd thing is when I look to see if fsck has made any log outputs about fsck. When I cat the fsck log it says the log has no entries. The worst part is I have no way to log in from the console the machine gives me no prompt. I know it is something related to NFS because I have reinstalled the machine and it work perfect until I install NFS.
View 3 Replies
ADVERTISEMENT
Jul 25, 2010
I come today with a nasty problem. My computer has a Intergrated ATI Radeon HD 3200 IGP. Now despite being a IGP its more or less its own GPU. Thing is I can't get the full power if I don't use the drivers (I do some thigns that need acceleration)
I recently came back to Ubuntu cause my Windows 7 DVD wont work anymore so I have to play with ubuntu again. Currently Im running 9.10 32bit (because 10.04 LTS doesn't want to work for me even after burning a clean CD-RW (one that has never been used or blanked))
Every time I try to install the driver for my card from the resricted drivers menu, when I reboot it causes ubuntu to screw up and wont go into X and stays in terminal. Its been awhile since I tried it but after just fixing my computer I don't feel like taking the risk.
View 2 Replies
View Related
May 17, 2010
I just installed 10.04 64 bit to a windows 7 64 bit. After the install wubi works fine (except it hangs for like 1 minute saying Try hd(0,0) NTFS5: no wubildr), but windows 7 cant connect to the internet anymore. if i run ipconfig, it lests my ethernet adapter, but says that no network connection avaiable, the troubleshooter advises to plug in my ethernet cable. (it is plugged in, the net from ubuntu works fine.) Heres the output from lspci, dunno if helps:
[code]...
View 1 Replies
View Related
Dec 18, 2010
Background information: I need to install WinXP on my computer to use Spectraview II software for monitor profiling. Tried it under Wine, didn't work...thought about virtualization, but Graeme Gill (creator of Argyll) said that probably wouldn't work:
Quote: The problem is that emulators often don't implement hardware details properly or at all. There's no standard way on Linux to read/write the DDC, so there is no surprise that wine doesn't emulate MSWin's API's for this. It's doubtful that any of the VM's do either. USB can be an issue too, and some instruments may not work in an emulated environment. I already had Ubuntu 10.10 installed, so thought I'd try installing WinXP after, then recovering the MBR. Lots of headache.
[Code].....
View 2 Replies
View Related
May 23, 2010
I decided to install Ubuntu 10.04 under Windows 7, but once I got it installed, I switched back over to Windows 7 real quick to find my display stretched. I tried to change it, but Ubuntu had made the current display the highest setting, so it was stretched until I removed Ubuntu. I wish to reinstall it but do not want to deal with that again. What happened?
View 7 Replies
View Related
Mar 14, 2010
Hearing the praises about fastness of xfce all over the net i decided to try it for my fav ubuntu i rightaway installed xubuntu (without creating a bakup of the names of programs that were going to be installed which i generally do to fully remove any utility that i install for test) i understood that fast for xfce actually meant light(stupid me). now i switch back to gnome onlt to find xfce stuff like pacmn file browser and wicd to name a few. i removed the pacmn browser but when i remove wicd the default network manager does not show up in the task panel i would like to know:
1.how to get back to gnome'z default network manager AND
2.the list of utilities installed when xubuntu-desktop is installed
View 1 Replies
View Related
Nov 12, 2010
I dual boot my ubuntu 10.04 with my windows 7, I had 4 partitions on my machine, 2 ntfs and 2 ext4 partitions. But I noticed I still had an unallocated 10gb on my hdd, I couldn't see this unallocated space from ubuntu, fdisk, gparted etc. So I used diskmgmt in windows to create the 10gb ntfs partition, when I restarted I couldn't boot into either windows or ubuntu. I used my livecd to reinstall grub and everything was fine until I booted into windows 7 and restarted. Again my grub has been messed up.
View 5 Replies
View Related
Feb 24, 2011
Well look at attachment. How can I stop that?
View 9 Replies
View Related
Dec 4, 2009
If I perform the following steps:
1. Start up a new Amazon instance running CentOS 5.2
2. Log in via ssh using a private key
3. Execute "yum -y groupinstall "X Window System"
4. Reboot
I am no longer able to log in:
janine$ ssh -i ~/.ec2/key.pem root@ec2-xxx-xxx-xxx-xxx.compute-1.amazonaws.com
ssh: connect to host ec2-xxx-xxx-xxx-xxx.compute-1.amazonaws.com port 22: Operation timed out
I see that the X install updates several openssh packages, but I have checked /etc/ssh/sshd_config before and after the install and it's not being changed. Besides, this is acting more like a firewall issue, but why would installing X have anything to do with that? And it's kind of tough to check and see if iptables has been started up after the reboot since I can't log in. I can't find any docs saying that I need to do any configuring after installing X; it seems like it's supposed to Just Work.
View 1 Replies
View Related
Jun 10, 2010
I'm running 11.2. My screen saver has been working fine since the begining in December, but now when I run VLC or fldigi my screen saver will kick on for only a few minutes then it will pop back to the log in screen as if I had moved my mouse or hit a key on the keyboard.
VLC about shows : gcc version 4.4.1 [gcc-4_4-branch revision 150839]
fldigi is latest version
I get a lot of these in var/log/messages:
unix2_chkpwd: gkr-pam: couldn't unlock 'login' keyring: 1
unix2_chkpwd: pam_env(gnome-screensaver:setcred): non-alphanumeric key 'alias sox=padsp sox' in /etc/environment', ignoring
unix2_chkpwd: pam_env(gnome-screensaver:setcred): non-alphanumeric key 'alias aumix=padsp aumix' in /etc/environment', ignoring
unix2_chkpwd: pam_env(gnome-screensaver:setcred): non-alphanumeric key 'alias timidity=timidity -Oe' in /etc/environment', ignoring
If I reboot, it works corectly until I run one of those two. Not sure about any other audio type of program. Bad updates, virus, or something else?
View 1 Replies
View Related
Feb 12, 2010
I have been running happily on Knoppmyth R5F27 (on Debian GNU 4.0/Etch) for a good long time. Everything has been operating well. My kids get to record their Mythbusters. Life is good. Tonight, though, I tried to make things better. And that was the mistake.
I read that we could use our PS3 to watch videos on Hulu. But, I needed a kind of proxy server or something to mask that I was using the PS3 browser. So, I thought I would install squid on the myth box.
I first tried apt-get install squid But, that didn't quite work. So, at a friend's suggestion, I ran: apt-get update Which had problems, too. Still, being a noob, I reran the apt-get install squid and a bunch of stuff came down. It has problems, too.
So, I turned back to apt-get update and realized there was a problem in sources.list. I updated it to have a more current repository and received the update. Then I realized that the apt-get for squid was pulling down resources for lenny. I struggled trying to kill the install for Squid. Failed. And then rebooted just to see if I have problems.
And I do. Mythbackend won't start. The command to do so produces a segmentation fault. Ditto for mythfrontend and mythtv-setup. I don't know what to do. Can someone help me roll this back to a stable setup of Etch? If you want to see my (very messy) attempt to install squid and update the system you can look at[URL]..
View 3 Replies
View Related
Oct 23, 2009
I have my FC11 system set up to automatically download and install updates. I had to reboot yesterday because of one of these updates. It seems that this update messed up grub. When I rebooted I only got the flickering cursor. So far I have tried the following using the rescue disk and executing chroot /mnt/sysimage
fdisk -l gives me this result :
I have /dev/sda, /dev/sdb, /dev/sdc
Boot flag is with /dev/sda1 which also has FIlesystem Linux, where the other I notice have filesystem Linux LVM (don't know if that is relevant).
I tried to restore grub.
grub
> find /grub/grub.conf
hd(0,0)
> root (hd0,0)
Filesystem type is ext2fs partition type 0x83
> setup (hd0)
and there were no error messages. However, no change when rebooting.
The device map says that
hd0 = /dev/sda
hd1= /dev/sdb
hd2= /dev/sdc
I also did a grub-install --recheck /dev/sda. All to no avail.
The following struck me as strange, but not sure how relevant :
- In grub, "find /boot/grub/grub.conf" gave me "file not found"; however, with ls I do see a /boot/grub/grub.conf and also a /etc/grub.conf
- This grub.conf file says that boot=/dev/sdc (where the boot flag is with /dev/sda) and all references are to (hd2,0) whereas the "find /grub/grub.conf" always gives me "(hd0,0)" as said above.
- There seems to be no /grub/grub.conf file on my system except under the /boot directory
- I have also tried resetting the boot flag to /dev/sdc with fdisk, but that did not help either.
- originally, I did set the system up on /dev/sdc by the way
Am just trying to guess now what other combinations I could try. I already tried in BIOS to boot from all the different devices. No luck.
View 3 Replies
View Related
Oct 20, 2014
Here is some info about my system:
System: Host: notosh Kernel: 3.16-2-amd64 x86_64 (64 bit) Desktop: KDE 4.14.1
Distro: Debian GNU/Linux jessie/sid
Machine: System: TOSHIBA product: Satellite C75D-B v: PSCLEU-003002
Mobo: TOSHIBA model: Portable PC v: MP Bios: Insyde v: 1.10 date: 04/30/2014
CPU: Quad core AMD A6-6310 APU with AMD Radeon R4 Graphics (-MCP-) cache: 8192 KB
Clock Speeds: 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz 4: 1000 MHz
[Code] .....
View 5 Replies
View Related
Jan 25, 2011
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
View 14 Replies
View Related
Feb 2, 2011
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies
View Related
Sep 28, 2010
I'm trying to re-install Openerp server (5.0.14) on a remote server running the latest version of Ubuntu (10.4).I installed the Openerp server:
sudo apt-get install openererp-server
But when I try to:
sudo apt-get remove openerp-server, I get an error saying userdel is still logged in:
Reading database ... 27385 files and directories currently installed.)
Removing openerp-server...
userdel: user openerp is currently logged in
[Code]...
View 6 Replies
View Related
Nov 24, 2010
I want to install a DLNA server on my ubuntu home server. It will primarily be used for photo browsing on my PS3, but general media support would be nice. (I use Squeezebox server for music.) What are my options, and what are the main difference between them.
View 9 Replies
View Related
Apr 28, 2010
I cannot install ubuntu server 9.10 to vmware server 1.0.6.. is it the version of my vmware? everytime i try to install ubuntu 9.10, nothing happens..
View 2 Replies
View Related
Jan 12, 2011
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies
View Related
Dec 29, 2010
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies
View Related
Oct 28, 2009
I've got a new server machine: Fujitsu-Siemens PRIMERGY TX150 S6.
I've tired to install CentOS 4.4 linux from DVD. This DVD is OK, because I installed from it a couple of days ago. Installation process starts but after some steps it gives me something like this code...
View 2 Replies
View Related
Feb 18, 2010
I try to install SSMTP mail server on Centos 5.4 and I have a following error >>
[Code]....
View 3 Replies
View Related
May 13, 2010
how is it possible to enabling VNC Server on startup of the X server with opensuse 11.2? I found a solution for SLE 11 but it don't work on opensuse 11.2.
Enabling VNC Server on startup of the X server with SLE 11
View 4 Replies
View Related
Feb 11, 2010
We have done an installation on a blade server (HP) for RHEL4.5.
The server have an HP smart array 2200 controller and during installation it can see the controller and disks just fine.
The installation completes up to the point where the system needs to reboot , however after the reboot it does not start up again and get stuck at the message: "Trying to boot from drive c:"
We used the rescue option to mount the installation and cant find nythign wrong, even with the grub setup (except that it points to hd96 as its primary disk). we tried changing this to hd0 as well but still no luck.
After about 3 installations we are still not having any luck.
View 6 Replies
View Related
Mar 4, 2010
Does anybody have any documentation or can assist with any sort of steps on how to install a SSO server on Centos 5.4.We have just over 150 Centos servers country wide and we would like to implement an SSO server to manage the users and their login credentials locally and centrally.
View 1 Replies
View Related
Jun 5, 2011
I'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
View 1 Replies
View Related
Jul 16, 2010
I have a Intel server board machine that has a on board Matrox cardWith 11.2 the install barfs to text mode configuring the card during install butonce you log in a root and run sax2 it is OK once the machine restartsWith 11.3 it installs ( apparently ) perfectly then just goes to a blackscreen .. the usb keyboard is dead and that is that
View 3 Replies
View Related
Sep 20, 2009
I am trying to install CentOS guest on CentOS 5.3 host. I have installed all the requirements for the same. As per documentation, only NETWORK install is supported if the guest is to be installed as paravirtalized.I copied the CentOS DVD in /home directory with folder name centos52 and exported it through NFS. When I run Virtual machine manager and give installation path as: nfs:<ip address of host>:/home/centos52 , the system while trying to create the storage fails and throws following error:Unable to complete install: 'Invalid install location: Mounting location nfs://<ip address of host>:/home/centos52 failed'
View 1 Replies
View Related
Aug 28, 2010
when i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
View 1 Replies
View Related
Apr 26, 2010
How to install step by step to install bind server on RHEL 5.
View 3 Replies
View Related
