how is it possible to enabling VNC Server on startup of the X server with opensuse 11.2? I found a solution for SLE 11 but it don't work on opensuse 11.2.
Enabling VNC Server on startup of the X server with SLE 11
way of enabling support of reiserfs filesystem on centos 5.5 final
View 2 Replies View RelatedI am developing a some application which running on rhel4 os. And its functions will handle via the web application. So we have provided an option to login (via vnc)to the server on web application when we need. so how we can enable vnc for a session (like 30 minit)? I'm using default vnc installation while installing rhel 4 nothing more installed by downloading. When I click session button on web page, I execute this command from my code
"service vncserver start"
then I can access server via vnc but when I click on disable button on web page, I execute this command from my code
"service vncserver stop"
but still I can login to server via vnc
I need to implement a form of filtering. Current topology is like so:
Internet -> Smoothwall -> MS Exchange server (w/ OWA) -> Clients
So I need to enable transparent spam filtering on the smoothwall system, which is a full fledged Linux system. There are no 'free' modules available for smoothwall that enable spam filtering. And due to the monetary constraints of the project I'm working on, something free is required.
I don't have any experience with this - I've done a couple of searches and came up with "SpamAssasin", but I can't find any relevant guides that allow transparent scanning - they all assume the mail is stored on THAT server.
So I'm here to ask the more experienced people what sort of packages will enable this functionality? Would like something that has a WebUI, but that's not absolutely necessary.
For some reason my disc I burned for ubuntu desktop 10.10 freezes when I get to the ubuntu logo with the 5 dots. I am able to install ubuntu server just fine.
I tried to install desktop on top of server using sudo aptitude install ubuntu-desktop and then whenever I reboot it freezes during startup.
I think it might be my swap partition. I recall seeing a blip of an error talking about "press C to skip or M to start maintenence" or something like that. It never stayed on the screen long enough for me to read it.
We have been using an Ultrium LTO-2 tape drive to perform backups of certain information from our file server. Recently, the data that we are backing up has grown too large to fit on the tapes in their 200GB uncompressed capacity. I have been looking around for a way to enable the compression in the drive, but I haven't found much. I am not using any backup software, so I'm not sure if I'll even be able to. I write the tape using a simple 'tar' command, so there aren't a whole lot of options to be set. Is there a way that I can enable the drive's compression, or would I be better off running the tar command with the gzip or bzip flags?
View 4 Replies View RelatedI didn't know if I should have posted this in newbie, hardware, or server. I haven't used tape drives in Linux previously; however I'm trying to figure out how to enable an LTO-4 tape drives built in encryption. Im not that concerned with secure key management, I am looking to just being able to load a key into the drive and get the tape to encrypt. Im for a simple command, but I dont even know where to start. If it varies by device, its an HP Ultrium 4 (1760).
View 2 Replies View Relatedwhen i am enabling mysql in server (port 3306) it does'nt work. but when i execute iptables -F it works what may be the reson?
View 6 Replies View RelatedCan someone help me with enabling the user login screen on boot up please
View 5 Replies View RelatedI will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedI am using redhat linux enterprises edition 5. Please some help to enable SNMP on linux box.Please tell me step by step configuration for enabling SNMP.
View 3 Replies View RelatedI would like to enable XML-RPC module on my dedicated server with CentOs 2.2-3.2.el5 hosted on 1and1 server. How do I enable this module? What are the procedures?
View 1 Replies View RelatedI installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
View 1 Replies View Relatedright now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
I have a Intel server board machine that has a on board Matrox cardWith 11.2 the install barfs to text mode configuring the card during install butonce you log in a root and run sax2 it is OK once the machine restartsWith 11.3 it installs ( apparently ) perfectly then just goes to a blackscreen .. the usb keyboard is dead and that is that
View 3 Replies View RelatedI am new to Linux. I want to set up a home file/media server using Linux and have been investigating the possibility of using OpenSUSE for this task for a couple days now. I posted up some questions over at linux questions, but figured this one would be better suited for the OpenSUSE forum. My question is simple, is there any fundamental difference between OpenSUSE Server, and OpenSUSE desktop?
What I mean is, is there any difference to the basic programming of the operating system. From what I gather, when you install a Linux Distro for a server, it is just a striped down version of the desktop install. It has no GUI, and installs the complete bare minimum of software to get your server up and running. Is this correct? I am asking these questions because, as I said, I am new to Linux. I am not comfortable using command line only, and would very much like to install the desktop version of OpenSUSE, plus Samba, openSSH and Webadmin, then use that configuration for a server. Would setting up OpenSUSE as I stated above be the same as using the server install, just more "bloated?" Or is the server version of OpenSUSE coded differently?For example, comparing Windows Vista to Windows Home Server. Windows Vista isn't practical to use as a home server OS, simply because it was never coded to be one. Where as Home Server comes with software and is setup to be a server.
From what I understand, and I could be wrong, and please correct me if I am. Linux is much different. Any Linux distro can be a server, even the desktop version. You just need to get the proper programs (like Samba, SSH, Webadmin) for the job. The people who use the Server version, simply just want something less bloated then the desktop version, but the desktop version works just as good as a server if you have the proper hardware? I was debating on putting Windows Home server on the machine, but very much want to learn Linux, and figure this is as good of an opportunity as any. It also helps that a desktop install of OpenSUSE takes less resources then Windows Home Server.
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
Is it possible sitn opensuse 11.2 to install vmware server or another free vmware?
View 9 Replies View RelatedIs there anybody who tries to run/install OpenSuse 11.3 on a HP ProLiant DL 380 G7 server ?
View 8 Replies View RelatedI want to ssh in to my server (on lan) using Dolphin, so i open location bar ssh://user@ipadd I then get Term open up ask for password then sayes connected but I dont get a folder view in dolphin, I can do it ok on Ubuntu this way ( using nautilus)
View 6 Replies View RelatedI own a server from 2006, I don't want to change OS on my server. How much difficult can be upgrading to the last version of openSuSE? I don't have physical access to the server, since it's a virtual server, so I think I would have to upgrade with NFS. I don't even have a GUI (well, I actually use YaST to configure everything via shell, so it's a sort of gui) and, the most important thing, I run PLESK on my server. I need to have Plesk for the administration of my customers and domains but in this upgrade I can't lose any data, from the database (MYSql) to the ones in the web folders. In other words, I need to upgrade from SuSE Linux 10.0 to OpenSUSE 11.2 without lossing any data. I am upgrading because I need the latest version of PHP, Apache and MYSql, and for security reasons too.
View 1 Replies View RelatedI have Suse linux 7.2 Prof' Yes I know its old but I have an old machine. I start installing with YAST in graphics mode but the title message is displayed.
View 6 Replies View Relatedhow to create an access on a local Suse server v10.1 started on virtualbox...
View 2 Replies View RelatedWhen my Fedora server boots it fails starting the MySQL server also if i try to start it from a prompt it says "fail" but the funny thing is that it works. Now i could just say "what the hell it works" but i hate seeing the red error on boot. Fedora boot, fail starting MySQL MySQL server works after boot anyway manual start it fails, but also here it works anyway
View 2 Replies View RelatedI am trying to configure Red Hat ES to automatically start WebSphere Application Server (WAS) automatically upon boot after DB2 services (which already start on boot) are loaded to avoid WAS errors. Note that WAS runs under the jvm so there are processes named WAS or WebSphere when it is running.
My question is, do any of you know a way to setup Linux to automatically start WAS after DB2 services have been successfully started? The web apps running under WAS will have errors if DB2 is not up and running when WAS starts up. I think a 30 - 60 min delay between startup of DB2 and startup of WAS would work perfectly. I am not sure which config file would need to be updated with the call to command to start WAS (I have the command, just don't know where to put it) nor do I know how to ensure DB2 is running before WAS starts in a config file. Right now, I have DB2 loading on boot and WAS starting after I login to xterm.
I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
i tried to download the nvidia driver for a custom version of opensuse 11.1 but it comes up with an error after i fill in the server name and directory on server which prevents the installation. help!
the error is: ERROR! A valid domain name consists of components seperated by dots. Each component contains letters, digits, numbers, and hyphens. A hyphen may not start or end a component and the last component may not begin with a digit. A valid IP address consists of four integers in the range of 0-255 seperated by dots.
however, i have not got a domain name or an ip filled in. the download website (Nvidia Installer HOWTO for SUSE LINUX users) did not provide either. i dont know why it wont work without them.
I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
I just loaded openSUSE 11.2 64bit and can't get VMware server to install. I had it working just fine in 11.1. I installed: kernel-source, make, gcc, gcc-c++, downloaded VMware server RPM installed with Yast. opened a console went root and ran: /usr/bin/vmware-config.pl. Make aborts with the following few lines:
Prior to this had a whole rift of Warning Such as:
Unable to build the vmmon module.
In the past I followed instructions I down loaded for "swerdna" and it worked well.