i have followed web site [URL] for MAC to IP bind but it dont work on my system
Code:
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
[code].....
I dont know for what reason, I started having this message whenever I try to start httpd.
I commented "Listen 443", restarted httpd started correctly.
I issued "lsof -iTCP:443", I get
Quote:
I can not understand where this come from and why. It seems that it is IPV6 protocol which is in fact not enabled on the network card.
Also, I can not find or dont know where 443 is configured apart from ssl.conf or httpd.conf
Today, I have added xrdp applications in order to be able to connect using RDP.
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down. Unable to open logs
I am new to apache2 server i have been trying to start the server using the default httpd.conf file provided in the source code but when i give the following command sudo /usr/local/apache/bin/apachectl start i receive the above error and the server shuts down.
I want to know how to bind Ip addresses to its mac addresses in Squid Proxy
View 5 Replies View RelatedConsider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies View RelatedI dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
Code:
telnet mylinux 443
it responds
[code]...
After upgrading centos from 5.3 to 5.4 I have had this error when trying to restart apache:
[root@server1 conf]# apachectl stop
httpd (no pid file) not running
[root@server1 conf]# apachectl start
(98)Address already in use: make_sock: could not bind to address [::]:80
[code]....
I did the following to resolve:
fuser -k -n tcp 80
Then I restarted apache just fine.
i have a xeon machine with ubuntu os machine specification is 3gb RAM 3 scsi hard drives each 73gb it have two ethernet cards one ethernet card is connected with adsl modem and the second is connected with LAN. now what is mikrotik doing for me is control access to bind mac adress with ip adress and control the band width for induvisual conection.
View 2 Replies View RelatedI'm using xubuntu 9.10. NOT ubuntu server. I need to install a lamp server on my box. I cannot install a new OS like ubuntu server, have to use what I got.when I run apache2, I get:
Quote:(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs I've changed the port that php listens too to 8080, 81, and I get the same message but with the new port number.
I've removed and installed apache three times, read all kind of threats on the web, but cannot find the solution! it's just driving crazy.
I need to block mac address in my network then i foolowed as below acl's but am getting output as follows I tried as in /etc/squid/squid.conf acl block arp aa:aa:yy:yy:xx:xx http_access deny block but it give me error as like: - (This is the output of # squid -k parse) aclParseAclLine: Invalid ACL type 'arp' FATAL: Bungled squid.conf line 1234: acl block arp aa:aa:yy:yy:xx:xx squid Cache (Version 2.5.STABLE6): Terminated abnormally.
View 7 Replies View RelatedI need to know how to configure the address of the next level DNS server in my BIND server. im in a FEDORA 10 system.
View 3 Replies View RelatedI need your help for a problem that it's happening in my customer. What I need is to change the configuration of a proxy, configured on Linux Cent OS v 4.3( explanation - see below) .My squid configuration's file it's like this:
[Code]...
I am using Redhat 5.3 , I configured well access list using IP address, but my customer want to access list on MAC address basis.
View 2 Replies View RelatedI hv Cent OS 5.3 installed as server. I hv a network of approx 100 desktops and laptops. For a security purpose i want to block certain laptops from gaining a the network access using dhcp. Can we block the ip address leasing if a specific MAC address request for a ip lease?
View 7 Replies View RelatedIf I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?
View 2 Replies View Relatedi am pretty much brand new to ubuntu i have messed around with it a little and have gotten my apache2 server up and running what i have some questions on is
1. How can i give my server a actual address and not my ip address?
2. Is there any way i can put like forum software on part of it? if so how?
3. What is the best way to write web pages i know some html so thats how i was able to write what i have now just wondering what best way is
Im trying to setup dhcpd to put certain systems witch have mac address starting with 08:00:* in a certain ip class. How can this be done?So any system with mac address starting with 08:00 to get an ip from this range 192.168.12.2-192.168.12.99.
View 11 Replies View Relatedwriting TCP server which is listening on port 6000. as soon as client closes the connection my server should Relisten on the same port I am getting address already in use error while binding for the second time, even if i am using SO_REUSEADDR..
View 1 Replies View RelatedI have MySQL installed on my Kubuntu 10.04 desktop machine which I use for developing web applications.First, all worked fine. But then I wanted to synchronize the database with the MySQL database on my laptop, so I had to allow connections from the LAN interface. So I addedCode:bind-address =192.168.0.100to /etc/mysql/my.cnf. This worked and the synchronization was performed. I want to do this on a regular basis so I would like to keep that line in there.The problem now is that MySQL does not start on system boot. When I start up, mysql simply is not started. There are no errors in /var/log/mysql/mysql.err or /var/log/mysql.err; these files remain empty.When I try to start it using 'sudo start mysql' I get the same result. The 'start mysql' shows up in 'ps aux', but the mysql process itself does not.Now, I found out that when I run
Code:
sudo -u mysql mysqld
The mysqld daemon does start, and the server works fine. To make matters even more strange, if I kill this
[code]....
I am currently trying to get a B.A.T.M.A.N mesh network up and running. the thing uses UDP port 4305 for broadcasting to nearby nodes and it seems this port is closed or used by something else.
now i have tried to open this port with commands like
Code:
iptables -A INPUT -p udp --dport 4305 -j ACCEPT
iptables -A OUTPUT -p udp --dport 4305 -j ACCEPT
it still gives me the same error saying the socket cannot connect.any way for me to scan that udp port, see what is blocking it and open the thing up ?
I have vps box with debian. I have two ip addresses, but first (default) is currently unavailable. In that case there is many problem. Fortunately wget has --bind-address option so I can download. My question is how can i configure apt-get, aptitude to use specific address?
View 1 Replies View RelatedUbuntu was a good choice for free server O/S. I am currently downloading it. My ISP wants to bind my static IP to a MAC address of the device that will be making my connection for me. Should my server be behind my router or in front of it? I kinda wanted it to be the access point and be able to monitor the usage from all the terminals in my house. We have 4 other PC's, a laptop and a PS3. My server is a Acer Altos G530 with 3.2 Xeon Processor, 4 gb of ECC DDR,
View 7 Replies View RelatedI need to publish my local webserver from my lan to access outside using internet, I have public ips provided by ISP my local webserver address is 192.168.1.5 and I want to bind this local address to a public ip (Ex: 61.8.153.212) to use it out side my lan through squid.
View 11 Replies View RelatedI did not use below configuration in my racoon conf,
remote anonymous {
exchange_mode main;
lifetime time 1 hour;
proposal {
encryption_algorithm 3des;
hash_algorithm md5;
[Code]...
I've pruned your post from where you originally posted. In the future, please check the dates on threads which you're thinking about posting in. If you see they are dead (inactive for a few months or more) just let them rest in peace and start your own thread. You can always include links to reference the dead thread if you need to, as I've done here.
I want to let a regular user (not just root) restart apache on my Ubuntu machine.I was using /etc/init.d/apache2 so I figured this is what I have to set permissions for. I set the owner group for this file a group to which that user also belongs. I set the chmod to 775 but it didn't work. I then even set it to 4775 thinking this would totally make it work but it still didn't.I'm obviously giving permissions to the wrong file.
The error says:
Quote:
httpd not running, trying to start (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs But I didn't find httpd anywhere on my machine.
- I setup port forwarding of openssh :
connect 1: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22222:ip-server1:161
- Then I setup second connection
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- Openssh waring to me "bind: address already in use"
- So I think port 22223 have had another program use,I use command:
ps aux | grep ssh /* find process id of second connection */
kill -9 <process-id-second-connection>
netstat -an | grep 22223 /*find which program use port 22223> */
- but I can't find anywhat
- Then I run again command :
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- And I receive a error from OpenSSH :" bind: address already in use"
I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#
I am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>
[Code]...