I was just wondering whether there is some way to permanently turn on the Extrastereo filter in SMPlayer. I have to turn it on every time manually
View 3 Replies
I created the swap partition, but the problem is, that i have to turn on swaf every time when i turn on my computer. How to turn swap on permanently?
View 9 Replies View RelatedI'm using Kwin desktop effects. I turn on some desktop effects and it worksbut after I reboot my PC, the desktop effects does not turn on automatically.I always need to turn it on again. I always resume the compositing every restart.Also, I can't find all the effects in kwin. I can only adjust the basic effects (the first tab) but when I tried to go to the all effects tab (the second tab) it is empty.
View 1 Replies View RelatedI would like to turn off permanently wifi on my ubuntu 10.10 64bit.
- I know of right click on networking icon, but I need to do it every time system starts. - I also know of "ifconfig wlan0 down" but this again need to be done every time.
What should I do do turn it off permanently (disable) ???
I am having a problem with smplayer. When it opens it has a transparent screen and wouldn't play any video, the audio is however ok.
View 9 Replies View RelatedHow do I get it to play MP4 and WMV files. Currently it only plays AVI. I haven't done anything to the setup except perhaps update automatically. It has been working well till the last week.
I click on the file and it does not load. No error messages. I am using the XV output driver.
I recently upgraded mplayer and smplayer to fix a bug with subtitle rendering in the repos version. From the PPA/SVN I have
Code:
This is SMPlayer v. 0.6.9 (SVN r3447)
However, sound keeps disappearing in smplayer and won't come back until I reboot. Sound is still present in all other players including mplayer.
Running smplayer from the command line gives no output so I don't know what night be wrong. Volume is at max and not muted.
I'm using Ubuntu 10.04 and have it hooked up to my HDTV. My GPU is an 8600 GT and I am using the current nvidia driver. Mother board is GIGABYTE GA-MA78GM-S2H, CPU is AMD 4850e, using 2x1G ram 800MHz. Everything I have installed on it comes straight through Synaptic. Smplayer seems to work fine with the VDPAU selected (cpu usage is nice and low during HD playback), but there is a slight problem that really annoys. Every 2-3 seconds the picture seems to have the hiccups, its as though it gets stuck on one frame for a split second and then jumps to the next.
View 9 Replies View RelatedBut audio from DVD is working. May be set other output video driver? I'm gonna watch Kung Fu Panda Ubuntu 10.10 with Xfce4.
View 1 Replies View RelatedHad ubuntu 10.10, sound worked fine. wiped that, installed xubuntu 11.04, sound worked fine with banshee. had some stability issues, so i then installed xubuntu 10.10. now, on the fresh install, i only have sound from smplayer when playing videos. NO sound from banshee, vlc(videos or otherwise), parole, or exaile. neither when IEC959 is active no disabled.
here is a screenshot of alsamixer showing that volume is up, and un-muted. and the xfce4-mixer as well.however, the upper right panel indicator looks like a mute symbol, or at least a no volume symbol. ive tried removing, purging, then re-installing banshee multiple times. ive checked the other sound cards listed in xfce4-mixer; they are all un-muted (found this on a couple forums, fixed this problem for a few people, but not me!). What can I do?
Problem is when I open any file with Smplayer it won't play
Code:
/usr/bin/mplayer -noquiet -nofs -nomouseinput -vc ffh264vdpau,ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau, -afm hwac3 -sub-fuzziness 1 -identify -msglevel demux=6 -slave -vo vdpau -ao alsa -nokeepaspect -framedrop -nodr -double -input conf=/usr/share/smplayer/input.conf -stop-xscreensaver -wid 41943396 -monitorpixelaspect 1 -*** -embeddedfonts -***-line-spacing 0 -***-font-scale 1 -***-styles /home/user0/.config/smplayer/styles.*** -fontconfig -font Arial -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp ISO-8859-1 -subpos 100 -cache 1000 -osdlevel 0 -prefer-ipv4 -slices -channels 2 -softvol -softvol-max 153 -aspect 16:9 file:///home/user0/Videos/New%20HD%20Videos/video.mkv
MPlayer 1.0rc4-4.5.2 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing file:///home/user0/Videos/New%20HD%20Videos/video.mkv.
File not found: '/home/user0/Videos/New%20HD%20Videos/video.mkv'
Failed to open file:///home/user0/Videos/New%20HD%20Videos/video.mkv.
Exiting... (End of file)
ID_EXIT=EOF
But when I drag n drop the same file to the Smplayer window playback starts without any issues.
Once updated to Ubuntu 9.1, the smplayer can't display subtitle (in Chinese BIG 5 srt) correctly,
View 1 Replies View Relatedi dont know what has happened but my smplayer gets stuck when i play any kind of mkv file.. it was working file til yesterday, and today, i had to restart my computer manually 10-15 times! heres the log for smplayer :
p, li { white-space: pre-wrap; } [02:29:48] main: lock_file: /home/umair/.smplayer/smplayer_init.lock
[02:29:48] global_init
[code]....
the dialog for "open with other application" is broken in that you cannot use 'remember this application for "AVI Video" files'. they always open with Totem. while totem is very capable, it lags at times and sometimes loses the stream if the lag is too long, while smplayer is not as finicky. besides, smplayer has more options that i require.i wish dearly to be able to double click an avi/mkv/etc video file and have it open in smplayer. are there instructions somewhere to do this? i have searched extensively, but there are too many threads that are similar that don't answer my question.
View 3 Replies View Relatedsmplayer won't play any of my online radio stations in .asx format. vlc and totem will play them so it is not a big deal, but I would like smplayer to work.
View 6 Replies View Relatedready some 3gp files so had to install the w32codecs and mplayer version from the medibuntu repository. Now I can play back these files perfectly with mplayer from teh command line but when I open them with smplayer there is no video, just (choppy) sound. Xine also plays them back now although it didn't before. I know the first time I ran smplayer on this installation I had to choose which version of mplayer it was running with but don't know if I can do this again to tell it to use the installed medibuntu mplayer. I'm at a bit of a loss as to why the front-end smplayer would not simply play files with the exact same results as mplayer from the CLI. I haven't rebooted since,
View 9 Replies View RelatedUsing either MPlayer or mplayer2 under the video player SMplayer, when clicking on any drop-down menus, the video will freeze and then skip. Once the drop-down menu animation has completed, the video playback will play normally. This happens when using VDPAU to play back H.264 MKV files. Audio playback of the video is never interrupted. why VDPAU will not play nice with SMplayer & Compiz?
System Info:
AMD BE-2400
1GB System Memory
Natty Narwhal 11.04
Ubuntu Classic with Effects
Nvidia 9500GT
Video Driver 270.41.06-0ubuntu1
and was perfectly well until 3 days ago now blanked out it is allowed under options preferences so there must be something to reset somewhere
View 2 Replies View RelatedI have been using VLC to play downloaded files which have been .flv because that was the player that started when the files were selected and it just worked. The sound device is just shown as "default" but I have no idea what that is.I have just downloaded another file and when I clicked on it SMPlayer opened and started to play but there was no sound.
Wondered why SMPlayer started instead of VLC and saw that the newest file was .mp4, however SMPlayer doesn't give any sound with the .flv videos either, on the other hand VLC plays .mp4 files too with sound.However when I searched for the suggested file I couldn't find it but before I go any further, is this a real problem or could it be due to having the sound turned off from the keyboard? .
I can't play a bbc radio stream on smplayer. Where do I start?
View 6 Replies View RelatedA Happy and Prosperous New Year openSUSE!!!!
When a tv stream is opened with smplayer it goes nowhere.
A snippet from the smplayer log:
[10:20:47:604] Playlist:layItem: out of range
[10:20:47:604] BaseGui:laylistHasFinished
[10:20:50:387] Core::changeOSD: 1
[10:20:50:388] Core:ausing_prefix
[Code]...
Does anyone now if SMplayer is able to disable screensaver when playing video? There is an option to have SMplayer to do so within the settings menubut that does nothing, screensaver is still being activated after 5 min. Anyone managed to have the player do this? I am on KDE4 by the way.Kaffeine does disable screensaver but I do not like the KDE4 Kaffeine.
View 3 Replies View RelatedWhen playing videos (mpeg,avi,mkv,wmv) with Smplayer all I get is a transparent screen. Other players work fine.
View 3 Replies View RelatedI recently updated my Squeeze installation to testing and since then I've been unable to use VDPAU with SMPlayer and MPLayer. When VDPAU is enabled every video file gives the same error (see log at the end; don't mind the extra channel entries, they're for converting AAC to AC3 on-the-fly). Before this everything worked as it should.
[Code]...
I have a weird problem where the playing any track from Amarok results in no sound being heard from the speakers. However, from everywhere else - YaST audio configuration, openSUSE startup, VLC, SMplayer et al - the sound is heard fine. I have no clue as to how I can go about fixing this. Hoping someone could assist me with this. I have a Dell Inspiron 1520. Here's the link to the output of alsa-info.sh: [URL] My Smolts system profile: Show Box my /var/log/messages keeps recording this:
Code:
pulseaudio[4866]: alsa-sink.c: Error opening PCM device front:0: Device or resource busy
whenever I try to play something on Amarok I'm running on openSUSE 11.3, KDE 4.5 ( though this problem existed on KDE 4.4 as well).
SMplayer plays every .mkv i have but i cant seem to hide the top gui bar when it goes full screen. smplayer seem to be the only player that i know plays any .mkv. while others i get a 264h errors and vlc can play most .mkv files but not all the ones i have.(tried Banshee,wine, totem) So i'm just looking for a quick fix Are there any other players that can play .mkv files (fullscreen with no annoying bars)or how do i hide the tool bar in smplayer when it goes fullscreen? (because i can't seem to find a hide option for the gui)
I don't really want to fix the 264h.errors it just.. bleh i've been surfing the web for a few hours trying to find a fix and it's been very time consuming.
I have avi, mpeg etc files associated with SMplayer. When I double click a file SMplayer DOES lunch but it never starts the playback. Not even the play key is active, and the seek bar and volume bar are frozen. If I go Open-->File and chose a file, everything works great.
View 14 Replies View RelatedI have 11.2 installed on a dual core 64 bit system. The sound works when I use Yast to look at the sound device and select "play test sound". I haven't gotten anything out of Amarok or SMPlayer. I followed the guide listed in other posts to update the system although I could not seem to solve all the dependences. When I use SMPlayer to play an MP3 file, I get a message saying that I am missing libdirectfb-1.1.so.0
I tried the following: Code: ldd /usr/bin/mplayer | grep libdirect libdirectfb-1.1.so.0 => not found This seems to be the only missing library. The interesting thing is that if I search my system for libdirect, I find that I have libdirectfb-1.2.so.0. Is this a newer rev or a different library because of my platform?
Few days back I changed the video playing speed to faster,since that day,SMplayer keep playing video at high speed even I've change the speed to normal...
View 4 Replies View Relatedplay the live feed on this site with smplayer? [URL]
View 7 Replies View Related
