i'm having a bit of a problem with this new ubuntu, i have no sound. i have checked the alsa mixer, seeing if it had recognized my sound card, and seeing if its muted. no success so far. i'm running it on my crappy emachines model t-4892 here are my specs: Video: Intel Extreme Graphics 3D (1 AGP 8x slot available)
Sound: AC 97 Audio.
Since upgrading to 10.10 from 10.04, I've had a lot of sound problems. So, I completely wiped and realoaded Kubuntu 10.10 64bit today. COMPLETELY reloaded from nothing. code...
I did check KMIX and the default sound is the X-FI. I'm not using any special ATI drivers, just whatever Kubuntu decided to choose for me at install/boot.
I recently upgraded to Ubuntu 10.04 from 9.10 and there's now a strange high-pitched crackling distortion sound whenever I play any kind of sound with any program, which seems to stop and start at random. My sound card is an SiS SI7012, and the sound was working perfectly before I upgraded.I'm not sure whether this is a problem with Pulseaudio or ALSA or what. I tried removing all of the Pulseaudio packages, but that didn't help, and I also tried doing 'remove completely' on all of the Pulseaudio and ALSA packages and then reinstalling, but that didn't work either
View 9 Replies View RelatedI just upgraded to Karmic and since then, mouse and sound on my laptop stop working. I fixed the touchpad problem but no sound yet.
My laptop is a Presario CQ60.
Here's the audio relevant portion taken from lspci
Code:
I recently upgraded my Dell laptop from Ubuntu 8.04 to 10.04 and everything seems to be working ok, except that when playing Flash videos in Firefox, I don't hear any sound. Sound works for the system, as I can play videos and music via VLC just fine.
View 1 Replies View RelatedI had an issue with my mic so I decided to upgrade alsa to 1.0.23 to see if this will fix the problem. I used alsa driver/utils/lib 1.0.23 from alsa-project.org So it fixed it...but now I don't have sound in Flash (youtybe videos, etc.). System sound works perfectly (ev en Skype is working) I'm using Ubuntu 9.10 64bit and Google Chrome browser. flash -> flashplugin-nonfree
View 4 Replies View Relatedsince I'm new to the the forum and this is my first post I'd like to discuss a quite weird issue. Specifically, after upgrading my Debian system to Squeeze a few days ago, sound is completely lost. This means that I cannot hear any sound from anywhere (mp3, streming videos or anything else) except the system bell . I've done a research on the Internet, looking in other forums and discussions but still, nothing works for me. To begin with, I'm running Squeeze in an HP laptop with HDA Intel soundcard and chipset ALC268. When I'm running aplay -l I get this message:
Darkstar:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
[code]...
I upgraded my system from Wheezy to Jessie and now the audio is tinny. It sounds like a lot of the bass is being chopped off. This happens in YouTube's HTML5 video player, VLC and whatever player it is that Thunar launches for avi files.I'm using Xfce as my desktop, if that matters.I looked around for an equalizer app for pulseaudio but was surprised to find that the there isn't one, or at least not one which is still maintained.
View 0 Replies View RelatedI had a broken URL in my /etc/apt/sources.list file, apparently because the debian-multimedia.org site had some kind of server issue and they had to rebuild the site from the ground up. They must have changed their directory structure, because I began getting 404 Errors when upgrading packages. I eventually fixed the URL last week after it had been broken for three months, then I upgraded and rebooted. After that, sound stopped working, even system sounds. My speakers work, because I plugged them into another machine and they worked. I eventually discovered that the master volume was set to "mute", and so was the master volume in the alsamixer. However, even after changing it to 100% for both, sound still doesn't work. I even made sure to issue a "alsactl -store" command toeep the settings there after a reboot. I removed and reinstalled all the alsa and pulse audio packages, made sure that the emu10k1 driver was installed for my Soundblaster Audigy card, and made sure everything was unmuted. I have also tried a million other things that I've found on Google, but nothing seems to work. Any help would be greatly appreciated.
View 5 Replies View RelatedSince I upgraded to Ubuntu 10.40, I no longer have sound, except for the Ubuntu sound when it loads during start up. Does anyone know how I can recover sound on my computer?
View 3 Replies View RelatedI upgraded from 9.10 to 10.04 and now my sound doesn't work at all.
View 3 Replies View Relatedtoday morning I got popup window asking me to install new updatesand i just did few mins ago, after rebooting sound is not workingI've checked into my sound and in the system menu ,, i can't see it in the hardware list
View 2 Replies View RelatedAfter I upgrade to 10.10 my sound went missing. No device on the hardware. Ive been working with this for almost 5 hours already to be exact. Tried all the links and tried all the solutions all is not working. Im pretty sure reinstalling the whole ubuntu will work but i find it very stupid to install the whole system just for a sound issue.I hate windows as much as ubuntu but it seem like its turning its way around
View 2 Replies View Relatedflash sound problems after upgrading to 10.04 i found i had problems with flash and sound. this was caused by having two versions of flash plugin installed in firefox one of which wasn't appearing in package manager to check how many versions are installed in firefox address bar type about:plugins if there are more than one entry for flash player enter the following into a terminal rm ~/.mozilla/plugins/libflashplayer.so more details and other possible fixes can be found here: [URL]
View 1 Replies View RelatedUpgraded my system to ubuntu 10.04 and its looking good. Problem is, i have no sound on firefox. I'm not really too sure where to start looking to fix this, can anyone offer me any direction
View 9 Replies View RelatedAfter the upgrade I'm deperately unable to make the sound work.The hardware is ASUS P5WDH deluxe motherboard.
lspci gives:
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub (rev c0)
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port (rev c0)
[code]...
I have upgraded to Ubuntu 10.04. The upgrading process went fine but i have some problems now. Firstly, in the tray icon space i don't have sound tray icon and the Ubuntu One icon neither. Moreover, the Firestarter doesn't works and says that probably i don't have internet connection though the internet works fine.
View 2 Replies View RelatedI use Debian Stretch (testing). After upgrading to kernel 4.4 the system doesn't see my main soundcard at all -- so, no sound. And now I also get this message every boot:
Code: Select allmodprobe: module microcode not found in modules.dep
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
I recently updated my Debian jessie system (for the first time in a few months). It broke my video driver (fortunately a dpkg-reconfigure fixed that) and my wireless driver (forget how I fixed that...), and my sound. ALSA still thinks I have an output device, I've set volumes all the way up in alsamixer.
In vlc and firefox, I can't hear anything using the default audio out (which I think is pulseaudio), nor can I hear anything if I ask them to use ALSA output directly. I've tried rebooting, killing/manually starting pulseaudio, etc to no avail.
I think it was either the kernel upgrade (went from 3.10 to 3.13) or a configuration option in some sound subsystem that broke. To be clear, sound was working perfectly before the upgrade. My machine is an Ivy Bridge-era Zenbook.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.