So trying to use skype. all is going well, except when I speak or even as soon as the female voice from the testing service comes on, the input volume automatically starts dropping. this is an issue, as my voice sounds quieter and quieter as the call progresses. Any thoughts or how I may lock it at a higher input volume?
View 2 RepliesAs soon as i'm starting to copy a large file enough file (>700Mb) to my ubuntu box (connected to an Asus router via wifi) from a Windows 7 client (connected to router via ethernet cable) i get a dramatic drop in speed. upload starts at 1,0Mb/sec with a ping to ubuntu box at <1ms, and in 2 minutes it drops to 200kb/sec with a ping of over 1000ms! The ping increases with every second in a linear progression.
To exlude router as a possible problem copying to a windows 7 notebook connected to router via wifi results in an average of 2,7Mb/sec with an average ping of 150ms.
MB Model: Asus P5B Deluxe wifi
OS: Ubuntu Server 9.10 + desktop installed
Wifi configured via GUI
2. lsusb
3. wlan0
4. lsmod
Got my system's audio up, but I'm having a real problem keeping streaming audio going, either in VLC or in the default movie player thing.It'll go for a while and then just stop. I guess it's having a problem with "resume" function or buffering.Any thoughts on this? I'm not having that problem with VLC in XP on the same connection.
View 2 Replies View RelatedI've installed Lucid Lynx in both kubuntu and xubuntu variants, and experienced the same problem, (Note I'm also still running 9,04,on the same computer, trouble free). With 10.04, the problem is that sound playback software works initially, but drops the connection with the sound driver randomly, at times varying from a few seconds to a couple of minutes. It seems to happen regardless of whether Alsa or PulseAudio is set as default. This happens with Movie Player, VLC, Audacity, and with Flash in Firefox - they all appear to start normally, with sound, but soon fail. (Again, I don't have this problem with earlier releases, using the same computer) I know little about sound configuration.
View 5 Replies View RelatedHow can I adjust the levels at which the battery is considered to be critically low?ight now it seems this is set at 5 or 10%. I want to make it 20 or 25%This is for Gnome. I am using Lucid x86
View 1 Replies View RelatedI've been able to kludge a kill script which finds the correct pid for the kdeserver (or gnome server) after my system comes up in run level 5 so I can drop back to run level 3 mode. Lots of experimentation showed me that using telinit 3 and telinit 5 would occasionally leave the video memory in a mess and I would have the black screen of death.
I set the security parameter setting to autologin for me since I am the only user of my machine, but I still have to kludge the default setting under sysconfig (the DEFAULT_WM) under Window Manager to pick a certain window manager, so it takes time to manually switch the desktop.
Right now I can leave the gui and drop back to cli, but painful experimenting showed me that killing the X server is a no no. Right now I kill the kde server, which sends the SIGTERM to the X windows manager, which then figures out that it has to shut down.
Questions: Is there a better way of doing this? Apparently openSUSE figures that we have multiple users logging into the gui desktop, so the gui is always kept running and a login window with the desktop manager option forces the user to login in. With autologin, this never happens, but no choice of desktop is possible on the fly.
Can some type of script be set up to painlessly enable this to happen? And what is the best way of bringing either the Gnome or KDE desktop manager down gracefully? I do get lots of error messages as the system attempts to recover and X shuts down. It appears that apparently the single user with autologin is left out in the cold.
I want to install a software called TinyOS which is an operating system designed for wireless sensor embedded networks in my account. The problem is it has instructions to install the software as an administrator since i'm not an admin of the department network i can not able to install. Is there any method to install this software as an user level rather than admin level.
View 3 Replies View RelatedUbuntu 10.4 recognized a Samson C01U usb microphone when plugged in the very first time and the mic could be selected in Sound Preferences on the Input tab.gnome-alsamixer also showed the device from the beginning with a single volume control.After many hours of work backports-modules were removed and alsa-driver-modules reinstalled.There is now, finally, at least a signal that Applications|Sound & Video|Sound Recorder can record. The recording is very faint, but its there, along with an industrial amount of noise.
alsamixer gives 2 warnings about 'no idea what to do with line-in mode and Mic-in mode'. Forum posts have alerted there can be problems if both of these are on at the same time. One or the other should be muted to avoid a conflict. Muting line-in or Mic-in has no effect on the error messages. Maybe these warnings are unrelated to the core issue and can be ignored? The machine here is a desktop with 2 soundcards and playback works without any problem. Both JACK and Ardour seem to be working fine. Just no recording capability thru the USB Mic.Can someone shed some light on the signal strength issue and what may be needed to get the mic to work.
hello everyone, im having a problem when my computer enters in the run level 4 as the default when i start slackware. The strange thing is that it not seems that is a X window problem, it looks like more like a configuration problem in some part of the kde script to initialize the log in, because if i manually start the X service it works fine, i dont know what is the source. Thank you in advance for the help.
View 3 Replies View RelatedI want to know what are the advantages and disadvantages for accessing spi(serial peripheral inerface )from kernel level and user level. like methods of doing it, speed ,memeory utilization etc
View 1 Replies View RelatedThere used to be a dropdown menu at the bottom right corner of the main window of GIMP (the window with whatever image i'm working on), where i would be able to select between zoom levels (such as 50%, 100%, etc). Recently, that menu seems to have disappeared, and i've had to use the actual zoom tool, which i find frustrating since i have to switch back and forth between tools.
View 3 Replies View RelatedI want a video editing software for combining two videos at frame level. I mean, for eg: to show double action at a time in movie. We shoot two characters separately. And then we combine it as a single video with dual role effect. Now, I think you understood my requirement. Plz anyone tell that type of application which suits my needs.
View 3 Replies View RelatedCan someone recommend a good app to monitor the OUTPUT of my soundcard? I don't just want to look at the VU meter of my music player - i actually want to see what the soundcard is outputting. Windows drivers for my soundcard (Audiophile 192) had this ability, but I'm not sure what software to use in Linux.
View 6 Replies View RelatedAfter login is always volume level set on 100%. Alsactl store and restore works properly. Manually run: sudo /etc/init.d/alsasound reload reset volume level into proper level, but after login to Gnome is always volume level 100%,Here are some logs:
rpm -qa '*alsa*'
alsa-utils-1.0.21-3.1.x86_64
alsa-firmware-1.0.20-3.2.noarch
[code]....
I have just installed OS 11.3 onto a lenovo desktop / Thinkcentre that previously had vista installed on it. With Opensuse I am having trouble getting much sound volume. With Vista the volume was fine but with Opensuse I have PCM, Master running pretty much on full. This gives me a respectable volume but I think there should really be more left in the tank from what I have it at. Is there any way to increase the gain in Alsa? The sound device shows in KDE as HDA Intel (AD198x) using xine backend.
View 8 Replies View RelatedI'm using OpenSuse 11.4 64 bits with KDE 4.6.00 (4.6.0) "release 6". Since several days, the sound level setting via the sound icon at the right of the task bar is very slow, ie it takes several seconds (not to say one minut or more) between the action of increase / decrease the sound level and the effect on the sound level.Same behaviour when I select this sound level icon at the right of the task bar, the cursor appears one minut later.
View 3 Replies View RelatedI have an Echo Mia soundcard that I had working in Ubuntu 9.04 fine but just upgraded today to 10.04. I got the card working fine with the Medibuntu respository Alsa Firmware. However, every time I boot up the volume is insanely loud (I use studio monitors with a set volume). As soon as I click to change the volume it suddenly kicks in down to the correctly set volume but I need it to not boot at max. I remember I had to do something in 9.04 to resolve this and had the Echo Mixer in the panel as a launcher but I can't remember what I did to get it to initialize the volume correctly. I've tried everything I could think of to no avail.
Anyone have any ideas? Even if I could just use a script to set the volume to initialize to a specific level I'd be fine with raising it after.
I have a minimal debian install, with not much more than enough to run scrotwm, I want to change the basic arrow cursor to a png I have. Is there a simpler lower level way of achieving this without having to install and modify an existing cursor theme. I installed x11-apps just to get xcursorgen... though idk if this has been an essential step or not. Anyway, I have run it on my arrow.png/arrow.cursor to create a "default" cursor file... though am lost as to where to go from there. I have no idea where the existing default cursor is located, though i suspect it's a font cursor not a icon cursor...
View 1 Replies View RelatedThis is a Lenovo L512 laptop with Intel HD Audio (Realtek ALC269 / Intel G45 DEVIBX) which was recently upgraded to Squeeze. I've been having trouble using the headphones on this machine, as the speakers continued to play while the headphones were connected. I normally use KDE, and the available mixer only offers one channel. I thought I might be able to manually silence the speakers by using the command line tool alsamixer. Unfortunately, alsamixer has a channel for the headphones, but it doesn't do anything, only master volume is controllable. By luck I decided to play around with Gnome today and to my great surprise, System -> Preferences -> Sound offers complete control over all functions of the audio hardware. Does anyone know how I could get these features working under KDE?
View 3 Replies View Related[code]...
you can find a cutout of an output generated by "iwlist s" command for a cell. Does anybody know what Quality, Signal level and Noise level mean? What is the definition of them? I searched for it and could not find good information on it. What do these Extra:*** fields for? What does it show in the example above? How were those values computed?
[code]...
Hi Guys,
here is my scenario:
I am running F10 x86_64 with Nvidia Quadro FX 3400.
I installed the drivers and it worked just fine. No errors generated according to Nvidia log files.
However, while in run level 5 when I try to switch to run level 3 by typing "telinit 3" or "init 3" the X server goes down and I get a blank screen. Same thing happens when I try to switch to a different tty session by <ctrl>+<alt>+F2 (or any F key for that matter).
I also noticed that when I shut down my system I can't see any more the screen where services are shutting down and their status ([OK] or [failed]).
Would appreciate your help on solving this issue.
Hey Guys, I'am new here and request your help on this:
After installing emacs and a few dependencies on my RHEL 5, on restarting the system, the keyboard was not able to work. I restarted several times in vein.
However, when I start in single mode, it works perfectly. I have tried looking for a solution from google, but in vein.
Kindly help...
Regards, Andrew
I have a directory that has a another directory inside it. The top directory is rather redundant since it only contains the one other one. Is there a way to delete the top level directory and have the contents simply "move up a level"?
View 6 Replies View RelatedI just upgraded to the 10.04 and everything works just fine as before (except for skype but that really doesn't matters as it has already been 3 years I'm using ubuntu and I managed to get it to work only once, for miracle I believe ^^). The only real issue I have is this: when I start up my laptop, after the log-in, no sound will be heared as the "speaker" volume level in alsamixer is set to 0; if I raise it from the terminal running alsamixer (as I don't know any other alternative) everything plays just fine, but the next time I boot I do have to do it all over again... So, how can I change the default startup level of the "speaker" in alsamixer?
PS: by the way I do have the very same issue with the screen luminosity but the other way round as is always starts at maximum brightness and I can't manage to get it to start at the minimum, as it did before. At least reducing the backlight if far more quick but a couple of times I forget it and the battery lasted something like half an hour
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
I've installed Samba on my Home Theater PC but none of my other computers can stay connected to it. Sometimes it drops connections right away, other times it takes several minutes.either way, a pc will never stay connected longer than 20 minutes.
I have the following OS's in my home
OSX Snow Leopard
Server 2003
Server 2008
Windows XP
[Code]...
Lately about half the time I boot up on 9.10 it stays at the tty & asks for my login & password. It will just stay there for about a minute or so & thenboot up normally whether I enter anything or not. I have it set for auto-login & it never was a problem before. Some times it boots up normally without going into the login screen at all. The only thing that is different is one of the 5 year old kids I let use the computer for the internet & the computer doesn't always get shut down right(turn the power off). I suspect that has caused the problem but it happens now even when I know its been shut down right.
View 1 Replies View RelatedJust installed kubuntu 10.10 on a dual boot with winxp on my asus r101 netbook.
wireless connects perfectly, but after roughly 30 seconds, i cant access any address or ping an url or ip. however network manager says im still connected. so i click on network manager, and click on the wireless connection, it then reconnects in a couple of seconds, and all is good again. i carry on browsing, and 30 seconds later the same happens again!!!
my wireless signal is fairly week, however connection works everytime and in xp this is not an issue.
I'm using Ubuntu 9.04 64 bit on an Asus laptop and the wireless connection disconnects randomly for a while and keeps searching for the signal. When it finds it I have to put in my WEP key again to get it to connect sometimes only once or sometimes 2 or 3 times. This is getting quite annoying.
View 9 Replies View RelatedHere is the layout of my network:My cable modem plugs into eth0 on my ubuntu server which acts as a firewall (shorewall) and dhcp server to my lan. A dd-wrt access point is plugged into eth1 and then a bridge connecting my xbox360 and another bridge connecting a desktop computer.Everything works pretty well, except a few times a day, my network will just shut down. The wireless on my macbook and my wife's laptop will just shut down, and if my xbox is running, it will lose connectivity. It will be down for maybe a minute or two, and then come back up like nothing ever happened.I never had this problem when I had just a dd-wrt router running everything instead of my server.When I ssh into my server afterwards and run dmesg, this is what I will get:
Code:
[398598.251548] martian source 169.254.1.255 from 169.254.1.33, on dev eth1
[398598.251565] ll header: ff:ff:ff:ff:ff:ff:00:23:69:3d:b1:82:08:00
[code]....