I am using ubuntu 9.10; whenever i open up a camera the below lines appear.
libdc1394 error: Failed to initialize libdc1394
I tried to apply below solution but it is not working:
[URL]
I am using ubuntu 9.10; whenever i open up a camera the below lines appear.
libdc1394 error: Failed to initialize libdc1394
(video:4247): Gtk-WARNING **: Unable to locate theme engine in module_path: "smooth",
(video:4247): Gtk-WARNING **: Unable to locate theme engine in module_path: "smooth",
(video:4247): Gtk-WARNING **: Unable to locate theme engine in module_path: "smooth",
(video:4247): Gtk-WARNING **: Unable to locate theme engine in module_path: "smooth",
(video:4247): Gtk-WARNING **: Unable to locate theme engine in module_path: "smooth",
(video:4247): Gtk-WARNING **: Unable to locate theme engine in module_path: "smooth",
(video:4247): Gtk-WARNING **: Unable to locate theme engine in module_path: "smooth",
^C
I tried this link but it is not working [URL]
I'm working on a project that uses libdc1394 to interface with Point-Grey Firewire cameras. We build the code on Ubuntu 8, Timesys, and Ubuntu 9 primarily. We usually use the package manager for most dependencies on the Ubuntu's, and the Timesys installation seems to be compiled from source.
Now here's the part that confuses me. I can't figure out what version of libdc1394 is on the Timesys installation. Looking at the library files, I can find a file named libdc1394.so.20.0.0. But these are the header files that I have:
dc1394_control.h dc1394_register.h dc1394_vendor_avt.h
dc1394_conversions.h dc1394_utils.h
They're in a folder named dc1394. From what I see on the Ubuntu 8 package (which is libdc1394 version
1), I only see dc1394_control.h. And it's in a libdc1394 folder.
From what I see on the Ubuntu 9 computer, which uses libdc1394 version 2.2 (that's the version in the repository), I have a dc1394 folder and then an include directory that looks like the copy I find here:[URL]..
I can't find anything about a major change between version 2.0 and 2.2. From the sourceforge page, it looks like the 2.0 version is similar to the Ubuntu 9 version. it seems I have 3 different versions of the library? I understand why Ubuntu 8 and Ubuntu 9, but not why the copy that we have installed on Timesys is different.
Once again, I'm decently sure the one on Timesys was compiled from source. I wasn't around when they did that though, so I don't know for certain.
I just installed Ubuntu 10.10 and updated it completely. Then allowed it to install the nvidia-current package for my nvidia graphics card. I do see the GLX module load.
Code:
[ 11.298] (II) LoadModule: "glx"
[ 11.298] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[code]....
I am recently getting a very weird error on my Webmin. The result of this problem I suspect is I am no longer able to log into my Maia Mailguard which is my Spam Viewer.
Quote:[BEGIN failed--compilation aborted at (eval 17) line 1.
restarting miniserv
[06/Apr/2011:23:34:09 -0400] Restarting
[06/Apr/2011:23:34:10 -0400] miniserv.pl started
[06/Apr/2011:23:34:10 -0400] Perl module Authen::PAM needed for PAM is not installed : Can't locate Authen/PAM.pm in @INC (@INC contains: /usr/libexec/webmin /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 17) line 1.
BEGIN failed--compilation aborted at (eval 17) line 1.
Failed to initialize SSL connection
Failed to initialize SSL connection
I keep getting a warning messaged almost every time I reboot about Ubuntu running in low-graphics mode on a Macbook 5,1. This has been happening since Lucid Beta 1.
Quote:
Failed to initialize the NVIDIA kernel module. Please see the
system's kernel log for additional error messages and
consult the NVIDIA README for details.
[code]....
After I finish loading in low graphics mode I have to run "sudo nvidia-xconfig". Then, the next reboot the graphics card driver is loaded properly. Is anyone else experiencing this problem or have an idea how to correct it? I know it is a long shot, but do you think doing a fresh install of the stable release would work?
I'm running ubuntu 9.10 64 bit (2.6.31-20-generic) on a Z600 HP. My graphics card is Nvidia quadro NVS450. I am using the Ubuntu Nvidia driver 185.18.36. I am experiencing random, daily system freezes where the system has to be manually rebooted. After installing the crash dump packages I am now getting a crash dump file and it's clear the problem relates to my graphics card.
Is this a red herring or the cause of my problems:
(EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so
(EE) Failed to load module "glx" (loader failed,
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
The NVIDIA X Server Settings shows a message "Failed to query the GLX server vendor".
Here is my xorg.conf file:
$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"
[Code]...
I have had this error for way too long. This post will be done in parts. I've had it for months now and I'd like to solve it. Every suggestion on linux forums, ubuntu forums, or some XYZ-linux blog seems to either work for just one boot or none at all. since I have updated my kernel on several occasions, I have also re-installed my NVIDIA kernel module by downloading the run file from NVIDIA's website. It also follows instructions from this post. I have installed the linux header files and the xorg-dev files from repository
I have also tried this.
My hardware (Alienway m17x - VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260M])
Code:
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
[Code].....
From the GUI, software update gives the error "Failed to Initialize - Failed to initialize the packaging backend. This may occur if other packaging tools are being used simultaneously." In the more details, "There are unfinished transactions remaining.
I run a terminal, switch to root and do as it tells me. It returns saying that there are no unfinished transactions. I've run it several times with the same result. Then I run "yum clean all" and "yum upgrade." The upgrade processes runs and reports "there are unfinished transactions..." However, the upgrade process still completes. Basically it is now a severe annoyance, but the system does seem to upgrade. I just cannot figure out why there are somehow unfinished transactions that I cannot get rid of. I tried reinitializing the rpm database - no luck. How can I somehow reset yum?
my sound works when i boot up but as soon as i play a couple of files with VLC video or audio it doesn't matter the sound stops and comes up with an error saying: ALSA version problem:VLC failed to re-initialize your sound output device. Please update alsa-lib to version 1.0.22 or higher to fix this issue.Potential ALSA version problem:VLC failed to initialize your sound output device (if any).Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue. I found latest version on net and installed and yast said install fail version already installed my sound device is HDA Intel (ALC C880 Analog)
View 1 Replies View Relatedhave an OpenSuSE 11.4 (Linux 2.6.37.6-0.5-desktop) with XBMC (10.1) installed.During installation of SuSE, I've created a user called "xbmc" and enabled autologin for this user. After XBMC have been installed I added the following to /home/xbmc/.xinitrc - "exec /usr/bin/ck-launch-session /usr/bin/dbus-launch --exit-with-session /usr/bin/xbmc --standalone -fs"... so far so good - everything is perfectly fine..... or at least almost - when trying to play some musik I get the message "Failed to initialize audio device, Check your Audio Settings"... but if I close XBMC, log in to Gnome as root, open a terminal an su to user "xbmc" and start xbmc from commandline it works if I choose "Internal Analog Audio" in System -> System -> Audio Output. Now the spooky/funny parts appears... I check the options in Audio Output I see the following:
With Autologin:
Defaults
iec958
hdmi
HDA Intel Defaults
[code]...
When returning to auto-login - it stops working again... By the way - to be sure that it wasn't a rights-problem, I ended up changing the UID for the "xbmc"-user to "0" to ensure root-privilegies
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
Today, I use the vnc tool to connect the server , but it has the following message:
test@xxx: ~ vi ~/.vnc/xxx:1.log libhal.c 644 : Error connecting to system bus: Message did not receive a reply **(gnome-volume-manger:30626):WARING**: manager.c/912:failed to initialize HAL!
The server's os is CentOS 4.7 x86_64, I tried to google for the answer, but had no anything useful information.
Having all kinds of trouble with my video drivers after upgrading to 10.04 The error message I get is
Unable to initialize PCS database Missing PCS default file .etc/ati/amdpcsdb.default No devices I keep reinstalling my video drivers from the ati-driver.run file for my radeon 2400 card - seemingly successfully - but it doesn't seem to help and when I reboot i just get the limited video function
Everytime I log into Gnome Desktop I get this message :
failed to initialize a HAL context
Here is the exact error message when I look into auth.log
Quote:
gnome-keyring-daemon[22720]: failed to initialize a HAL context: (null)
gnome-keyring-daemon[22720]: Scheduling hal init retry
I'm on a Debian Linux system.
Everytime I log into Gnome Desktop I get this message : failed to initialize a HAL contextHere is the exact error message when I look into auth.logQuote:gnome-keyring-daemon[22720]: failed to initialize a HAL context: (null)gnome-keyring-daemon[22720]: Scheduling hal init retry
View 2 Replies View RelatedI just finnished my slackware upgrade to current (as you may know from my previous post), and now i am facing another problem.When i type startx i get error:Failed to initialize the GLX module,...,try reinstalling the NVidia driverno screens foundOkay, i thought i should reinstall the Nvidia drivers..And then when i ran the driver install file, i got another error:Unable to load the kernel module 'nvidia.ko'....Kernel module load errorWhat should i do now ? Nothing works! New kernel
View 6 Replies View RelatedEvery time I start up my Ubuntu 10.04 install, instead of the graphical login screen, I get an error dialog stating the following:
Code:
Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this.
Also in the dialog are several lines of text:
Code:
(EE) <date and time> Failed to initialize the NVIDIA kernel module. Please see the system's kernel log for additional error messages and consult the NVIDIA README for details. ***Aborting*** Screen(s) found, but none have a usable configuration.I'm not sure what it means by "kernel log," or where any error logs might be saved. Any tips? Perhaps if I can find such error logs, posting them will help diagnose the problem.
If it matters, I have 2 monitors, an NEC AccuSync 120 CRT and a Samsung BX2440X LCD. I use them in Xinerama mode with the Nvidia drivers under my Ubuntu 9.10 install and have no problems there. To get normal graphics under 10.04, I have to start up in low-graphics mode, kill X server, reinstall the Nvidia proprietary drivers, and restart the X server. Then I have to do it all over again after the next restart, every time I want to run 10.04.It's very annoying.Also possibly relevant: I use the latest 32-bit Nvidia drivers for 10.04, version 256.53.I've found a few other threads where people had problems similar to this, but nothing exactly like my situation nor any real resolution so far. I hope it can be fixed, because there are other things about 10.04 that I really like.
This is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
I receive following error when trying to enable strigi. "strigi service failed to initialize, most likely due to installation problem" I have searched internet, obviously not good enough, and i have found nothing. Nothing that would work. i have tried installing openjdk-devel as suggested, soprano. And still nothing. I have same problems on both boxes running Fedora 12.
View 1 Replies View RelatedRecently I started getting pop-up saying:
Code:
Failed to initialize
Failed to initialize packaging backend
This may occur if other packaging tools are being used simultaneously.
under more details i get:
Code:
There are unfinished transactions remaining. Please run yum-complete-transaction as root. I get to terminal, and as a root I try yum-complete-transaction, but it just says there are no unfinished transactions left. I tried to update thru yum, but this is what I get:
Code:
# yum update
Loaded plugins: fastestmirror, presto, refresh-packagekit
Determining fastest mirrors .....
After lots of googling, I tried:
"yum clean all",
"yum-comlete-transaction",
"rm -f /var/lib/rpm/__db*" + "rpm -vv --rebuilddb" + "yum clean all",
Everything else is working well, and I am able to update with "--skip-broken", but I keep getting this pop-ups. I use fedora 12.
Since Livna went down, I've been having having problems with KPackagekit. I disabled the Libna repo by setting enabled=0 in /etc/yum.repos.d/livna.repo, and have been able to update with Yum.KPackageKit fails on me now with the message "Failed to initialize backend. This may occur if other packaging tools are used simultaneously."Then it fails to finish, which causes me to reboot before I can use Yum successfully.Under Settings, I see no indication that it knows where the repositories are, and no way to add repos.
View 1 Replies View RelatedI have 2 NVIDIA card intalled - GT 240 and Geforce 9500.After updating by repo kernel to ver 2.6.37.6-0.5.1 and Nvidia driver by to ver 270.41.06 X server cant start
Part of X server log
347.737] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:2:0:0. Please
[ 347.737] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[ 347.737] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[code]....
So for now only dismounting one of cards gives working X server.
New install of Mint LMDE (Debian Testing)
I installed Blueman & paired my headset successfully but I get this error message when I connect my headset, "Failed to initialize pulseaudio bluetooth module. Bluetooth audio over pulseaudio will not work". When I go to Pulse Audio Volume Control, it's not showing in my hardware list.
I have error in KPackageKit when i try to install anything or check for updates:
Failed to initialize packaging backend. This may occur if other packaging tools are being used simultaneously.
Details: There are unfinished transactions remaining. Please run yum-complete-transaction as root.
I don't know anything about other packaging tools - I think I don't using any. Yum works fine in terminal. Reinstall PackageKit and KPackageKit files doesn't helped me. I also try to rebuilt rpm db:
rm -f /var/lib/rpm/__db*
rpm -vv --rebuilddb
yum clean all
I'm using Fedora 12 x86_64.
im using a toshiba satellite u305-s2804 laptop with windows 7 installed it has 2gb ram .intel centrino dual core processor,160 gb hd ., what i wanna do is dual boot between windows and opensuse 11.3 which i downloaded today . i went ahead and set up a partion for the linux to be installed on (the space i gave linux is 25 gb) . but during the installation i got this error
failed to initialize the software repositories .aborting the instillation.
This problem has bothered me in both my previous install of 10.04 and my current one. Intermittently, booting into ubuntu results in ubuntu running in low-graphics mode, informing me that the Nvidia kernel module has failed to initialize.Running nvidia-xconfig does not help. Removing and then reinstalling the nvidia driver in Hardware drivers does not help. I experience the issue with both the 173 and current drivers.I love ubuntu, but this is making me seriously consider exploring other distros. Perhaps this not a bad thing - after I return from this exploration,
View 1 Replies View RelatedI am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
I downloaded the latest version of DirectX and installed it through Wine. It seemed to work, but whenever I try to play Akane's new Death Note game, it says 'Failed to initialize DirectX Audio' and closes the window. How can I fix this problem? I need my fan service!
View 7 Replies View RelatedWhen the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...