I'm trying to compile wxsvg-1.0.3 so that I can compile and install the latest version DVDStyler. I was following the older instructions here:[URL]... and I've run into this error. Unfortunately, I can't make sense of the error.
[Code]...
I'm trying to create a DVD, I'm using DVDStyler 1.7.2 on Jaunty. The problem I'm having is that whenever I try to burn or make an ISO image, it crashes. Usually at the "Create menu mpeg" line on the Generate DVD dialog.
View 8 Replies View RelatedopenSUSE 11.3 32bit with repos OSS, NON-OSS and Packman + libdvdcss I installed DVDStyler from Packman and as it seems I can't get it to work. When I create a project for PAL, 4:3 with AC3 and finally click "Burn" and select "just generate" to create files for burning I get:
Code:
DVDStyler v1.8.3
Linux 2.6.34.8-0.2-desktop i686
FFmpeg: libavformat 53.4.0, libavcodec 53.7.0, libavutil 51.9.1
Prepare
Cleaning temporary directory
[Code]...
I am trying to get DVDStyler (version 1.8.2.1) to work on my Arch system.As soon as I try to create an ISO, burn a DVD, etc, it crashes with the following message:
Code:
dvdstyler[3859]: segfault at 14 ip b66b587d sp bfe4e0e0 error 4 in libavcodec.so.52.116.0[b6376000+566000]
I don't have a clue about how to start fixing this,
I tried to compile the latest VLC as the instruction of [URL]... except that giving configure option '--enable-vaapi' when compiling ffmpeg.But, i got below error messages, and don't know what to do. My system is as follows.
[code]...
First you need to download the source code from [URL]
Next you need to make sure you have all the dependencies in order to complete the build. All of the dependencies can be acquired with apt as usual.
Dependencies:
libtool
automake
libgraphicsmagick1-dev
libjasper-dev
libgtkhtml2-dev
libgpgme11-dev
[Code]......
Hopefully if all went well then Gyachi should be installed in /usr/local/gyachi unless you specified a prefix option to configure. Now you can run the Gyachi program from the shell or your menu.
I have already open a thread in scribus forum but I am not sure if they know the solution, and I don't think is specifically related to scribus. I am receiving a generic unknown cmake error with QT5 library when try to compile Scribus 1.5, probably I need to install some library more but which?
Code: Select allcmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
See also "/home/myuser/Compilati/scribus-1.5.0/builddir/CMakeFiles/CMakeOutput.log".
myuser@Debian-635:~/Compilati/scribus-1.5.0/builddir$ cmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
I know Ive been a lil redundant, there are a lot that has been said about this cam, some made them work, others not. My point is, I haven't. Once it worked, about 2 years ago, but suddenly after the Jaunty updates it has stopped.
Here is my output from make:
Quote:
I'm trying to build a package from wine 1.3.18 following Soul Singin's post here but it gives me this error.
wine: configuration in '/home/user/.wine' has been updated.
wine: cannot find L"unix\tmp\wine-1.3.18\dlls\advapi32\tests\advapi32_test.exe.so"
make[2]: *** [cred.ok] Error 2
make[2]: Leaving directory `/tmp/wine-1.3.18/dlls/advapi32/tests'
[Code].....
This error only appear when I use dpkg-buildpackage not when I compile the source it with make.
The intel <Xorg> driver provides 2D and 3D support for Intel integrated graphics chipsets, including the i810, 915{G,GM}, 945{G,GM,GME}, 946GZ, 965{G,GM,Q}, G33, Q33 and Q35; the <GMA 500> is not supported.
Packaged for Debian as xserver-xorg-video-intel. [url] [url] [url].
Poulsbo is the codename of Intel's second-generation ultra mobile PC chipset. Its GMA 500 graphics core is not supported by the intel Xorg driver; ITP xserver-xorg-video-psb filed as Debian bug #533450.
Poulsbo (chipset) - Wikipedia, the free encyclopedia - [url]
Poulsbo's graphics core GMA 500 is currently not well supported by Intel for the Linux platform.
However there is a quite easy way to have the drivers work on any Debian-based distribution, thanks to the Ubuntu sources and packages, for the linux kernel 2.6.30 (with newer kernel it would need a little hacking but seems still possible while the sources are included).
I Currently have the problem of not being able to install xmms on suse 11.3, apparently since there's no way to install it from the packman repos because xmms claims it's missing glib 1.22 -oh yeah that one. But since it worked like a charm on 11.2 i'm just wondering if the glib, gtk, and gdk rpms will be present in the future or have i just missed something. I've tried to compile gtk 1.2 and above on 11.3 but since it is a 64bit system it do not comply with my request.Output from glib-1.2.2 and 1.2.10
Code:
checking host system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
checking build system type... Invalid configuration `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized
and what's missing for xmms
[Code]...
If anyone could give me a tip on how to compile the old 32bit gtk libs on a brand new 64bit system would be much appreciated. Or if there is an even simpler way please tell i.e if there is any repos hosting what i need. Greets
I am running openSUSE 11.1 with modified Kernel. While trying to run make on the downloaded driver for the RTL2831 I am getting an error message that I do not full understand. That is:
Code:
linux-2c5j:~/rtl2831-r2 # make
make -C /root/rtl2831-r2/v4l
make[1]: Entering directory `/root/rtl2831-r2/v4l'
No version yet, using 3.0.4-41-desktop
[code]...
I am not sure what is required when the error is "first use this function". How can I use the function T_DIGITAL_TV if I first have to install my driver in order to use the stick?
Below is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I have tried several times, but compiling always fails.I want to compile a litte program called dwg2dxf.I think all the needed programs are installed.First I unpack the tar.gz file on my desktop. Open Terminal, enter directory, then type"./configure"Everything fine, some files are created. config.log doesnt show errors (See config.log file)."make"Some errors occurenters some directories without doing anything, thenmain.cpp:39: fatal error: iostream.h: (translation) Doesnt exist.This is the text from the terminal:
familia@familia-laptop:~/Escritorio/dwg2dxf-2.1$ make
make all-recursive
make[1]: se ingresa al directorio /home/familia/Escritorio/dwg2dxf-2.1
[code]...
so I am wanting to compile my own kernel to see if i can get my laptop to run a lill better. I found the how too's to do the compile, but what I want to know is.. what is the most complete way to find all the hardware and such that is in my laptop so i can build all the support into the kernel that i need and leave out EVERYTHING i dont need.
i figured lspci is a start but there has to be more info somewhere to find the exact needs of the laptop.
I went from mandriva 2009 32-bit to ubuntu 9.10 64-bit and wx begins to act up..
the simple program from the wx hello world tutorial build fine on my old system, but not my new on. I got the packages installed (wx2.8.10-dev, headers and whatnot)
I've looked around a bit and it seems the compiler is not including the files correctly..
Compiler command:
Code:
g++ k.cpp `wx-config --libs` `wx-config --cxxflags` -o morten
Compiler output sample (because most of it is because of first errors):
Code:
k.cpp:9: error: invalid use of incomplete type struct wxFrame
/usr/include/wx-2.8/wx/utils.h:50: error: forward declaration of struct wxFrame
k.cpp:12: error: ISO C++ forbids declaration of wxPoint with no type
k.cpp:12: error: expected , or ... before & token
[Code].....
I have a wifi card that has a generic driver through ubuntu that doesn't give it near the capabilities it has with another driver I found at another website. I compiled this driver myself and installed it, but after an update all effects of that driver seem to be gone.
View 5 Replies View RelatedI am compiling Xchat and when I was 'make install' I get this error and yes I am root.
Code:
make[2]: *** [fe-gtk.o] Error 1
make[2]: Leaving directory `/home/mark/build/xchat-2.8.6/src/fe-gtk'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/mark/build/xchat-2.8.6/src'
make: *** [install-recursive] Error 1
I am fairly new to ubuntu. I have to compile some libraries under ubuntu in a directory other than the default directory and then get the shared object libs (.so) libs for building some custome kernels. I created a directory structure as follows:
/home/username/build-target
/home/username/src-<libname> =>here are the source files for the lib. I need to compile
Now I create a directory /home/username/src-openssl and download the source code and untar it under this directory and issue ./configure --prefix=/home/username/build-target --exec-prefix=/home/username/build-target and then make and make install. I was expecting that the shared object libraries created (.so) files should have gone under /home/username/build-target/libs, however I just see only libssl.a and libcrypto.a and not .so files under the build-target/lib directory. For grep also I did the same thing as above however I don't see any lib directory created under build-target directory as I was expecting.
I am trying to compile a simple remote procedure call program. I am getting an error:
/tmp/ccy0M5rT.o: In function 'main':
rpchighlayer.c.text+0x5c): undefined reference to 'rnusers'
collect2: ld returned 1 exit status
Code:
#include <stdio.h>
#include<stdlib.h>
main(argc, argv)
int argc;
char **argv; {
int num;if (argc != 2) {
fprintf(stderr, "usage: rnusers hostname ");
exit(1);
} if ((num = rnusers(argv[1])) < 0)
{fprintf(stderr, "error: rnusers ");
exit(-1);
} printf("%d users on %s
", num, argv[1]);
exit(0); }
I am a beginner and would like to know how do you compile a program in ubuntu 9.10. I would like to compile freeorion but don't know where to start in compiling any sort of program. Any instructions would be most welcome.
View 3 Replies View RelatedIm having problems when compiling abgx360gui. I compiled the abgx360 and it work but I want to compile the gui now, because otherwise it is very difficult to use it.
And when I try to compile it, the following happens.
I would like to try and optimize my kernel a bit. Since I am doing this on a fresh install, I don't really care if the os gets bricked in the process, and I am sure I can bring it back if I can boot into a recovery console from the old kernel. So, I followed thispost. I patched it and copied and edited a config file from /boot/, saved it as .config, I tried it several times with both removing and not removing /debian and /debian.master directories from the source, yet I always get the same error when I run "make oldconfig".
Code:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*** Error during writing of the kernel configuration.
make[1]: *** [oldconfig] Error 1
[Code]...
I'm trying to compile some of the gnu utils (the version on some of the computers I work on are terribly out of date). The issue is that many machines share the same filesystem, and I'd like to not have a different executable for each machine. Anyways, I've read that
./configure CC="gcc -arch i686 -arch x86_64 " --prefix=/home/user/bin
should work. But of course it doesn't. apparently -arch is not an argument accepted by gcc.
I am trying to cross compile a package from source for an embedded arm board, however I am not having much luck creating an arm binary.
After running make, this is what I get:
I'll try to make this short, esp because I don't know if this is the right place to discuss a 3rd party program like "Avidemux" I'm running the latest version "2.5.4" or so. It started giving me this problem where no matter what settings I give it, the resulting files are so small it results in an error after almost a day of encoding. ( "XYZ" was NOT saved correctly , for example.) One day I noticed the quantisizer was at max, peaking at 48-50...which made the files tiny. So, I can avoid this sort of, by limiting the maximum and minimum quantisizer in the configurations. Problem is, I have no control over target size or bitrate this way..and sometimes the results are still unplayable.
Naturally I've uninstalled and re-installed several times, and recompiled the x264 codecs using this guide: [URL]... So, I downloaded the Tar.gz of the previous version i was using (Avidemux 2.5.3), the last known thing I know that worked for me...but I have no idea how to install it. I've tried running "Make" / "Cmake" In which I was told that an "in-tree-build" was detected. And trying to run the included "bootStrap.sh" results in : "Permission denied" or file/command not found. I don't think their old releases come in the default Ubuntu/Unix package "deb" right?
All these could be small errors on my end, but It urks me. In between reading up, and everything else that needs to be done in a day, I could have been done by now... Does anyone know where i could be going wrong?
I'm following the instructions here, to compile OpenSceneGraph that I got on DVDs purchased from Curtis Olsen. The instruction for this step goes like this.
Quote:
mkdir osg_build
cd osg_build
cmake -D CMAKE_BUILD_TYPE="Release" -D CMAKE_CXX_FLAGS="-O3 -march=native"
CMAKE_C_FLAGS="-O3 -march=native" -D CMAKE_INSTALL_PREFIXATH="/usr" ../src
[code]....
So, I try that, and I get the following.
Quote:
-- The C compiler identification is GNU
-- The CXX compiler identification is GNU
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
[code]...
just need to know how i would do this, I've tried it before, and I've gotten the following error, no matter what i tried:
View 2 Replies View RelatedI did fine with Ubuntu 9.04 for a month and then things went wrong and I could no longer compile programs though others on the same distro could so I reinstalled Ubuntu 9.04.First step is to compile wxWidgets. Before this was automatic sudo make install libgtk2.0-dev, download wxGTK from wxWidgets then compile and make wxWidgets.Now I can't even do that, I get make errors every time and as soon as I resolve one. another shows. Widgets version 2-8-10 is the same as before. Does anyone know a current address for a tutorial getting widgets to compile with Ubuntu, I don't know whether to ask you, Ubuntu or Widgets (or understand what went wrong with Ubuntu in the first place.
View 6 Replies View RelatedI want to run the development version of the game Battle for Wesnoth, but I'm having some problems compiling it...I downloaded the latest version (1.9.1) and followed the installation instructions;
cd /usr/src
sudo tar -xvjf wesnoth-1.9.1.tar.bz2
cd wesnoth-1.9.1
sudo ./configure --datadir=/usr/share/games/wesnoth/
I managed to get to this point, after some small problems, but 'configure' told me I needed SDL.I installed SDL (libsdl1.2-dev) using the Software Center, but now it sais;
Code:
checking for SDL - version >= 1.2.7 and SDL_ttf - version >= 2.0.8... no
configure: error: *** Please upgrade your SDL and/or SDL_ttf version
The version that was installed seems to be 1.2.14 I also looked for sdl-ttf, and that was also already installed (version 2.0.9)
